Let's adopt Herbert Xu's patch, not waiting for it to reach dash git:
hush already has a similar fix.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
(cherry picked from commit 53a7a9cd8c)
Testcase:
21 01 01 00 00 00 00 00 e7 01 01 01 ef 00 df b6
00 17 02 10 11 0f ff 00 16 00 00
Unfortunately, the bug is not reliably causing a segfault,
the behavior depends on what's in memory before the buffer.
function old new delta
unpack_lzma_stream 2762 2768 +6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
(cherry picked from commit 04f052c56d)
On certain corrupt gzip files, huft_build will set the error bit on
the result pointer. If afterwards abort_unzip is called huft_free
might run into a segmentation fault or an invalid pointer to
free(p).
In order to mitigate this, we check in huft_free if the error bit
is set and clear it before the linked list is freed.
Signed-off-by: Samuel Sapalski <samuel.sapalski@nokia.com>
Signed-off-by: Peter Kaestle <peter.kaestle@nokia.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Otherwise if $HISTFILE is unset or reassigned, bad things can happen.
function old new delta
ash_main 1210 1218 +8
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If the Range: header is not present it the request,
the offset passed to sendfile is wrong,
and httpd falls back to the read-write loop.
function old new delta
send_file_and_exit 857 865 +8
handle_incoming_and_exit 2239 2230 -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 8/-9) Total: -1 bytes
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This lets bb mount build for limited targets without syslog.h,
as long as the parts using it like NFS are disabled.
Signed-off-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It made ^C break out of the entire shell, if we aren't in PS2 mode.
Need a better idea.
function old new delta
expand_one_var 2344 2353 +9
syntax_error_unterm_ch 21 29 +8
parse_dollar 817 824 +7
parse_stream 2251 2238 -13
fgetc_interactive 249 227 -22
syntax_error_unterm_str 26 - -26
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 3/2 up/down: 24/-61) Total: -37 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If we have a square, the speedup can be extremely large
(in best case example below, it's ~40000 times faster):
$ time ./busybox_old factor 18446743988964486098
18446743988964486098: 2 3037000493 3037000493
real 0m4.246s
$ time ./busybox factor 18446743988964486098
18446743988964486098: 2 3037000493 3037000493
real 0m0.000s
function old new delta
isqrt_odd - 57 +57
print_w - 36 +36
factorize 218 236 +18
print_h - 7 +7
factorize_numstr 65 72 +7
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/0 up/down: 125/0) Total: 125 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
13 bytes are not worth the risk of doing something iffy after vfork().
Let's have much clearer code there.
function old new delta
launch_helper 175 188 +13
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When tab-completing a command we search PATH if the partial text
doesn't include a slash. Also match subdirectories of the current
directory, in case the user intends to run a binary from one of
them.
function old new delta
complete_cmd_dir_file 894 917 +23
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Only files should be matched when using PATH for tab-completion.
function old new delta
complete_cmd_dir_file 883 894 +11
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 11/0) Total: 11 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is safe: it's not a setuid applet, the attempt to set time
will simply fail if attempted by non-root
From openwrt 600-allow-ntpd-non-root.patch
function old new delta
ntp_init 1049 1005 -44
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
There are cases where binding to source IP and
destination IP is insufficient to guarantee sane
xmit netdev.
One case where this can fail is when
route-matching netdev carrier is down (cable
unplugged, wifi disconnected), or the netdev is
admin down. Then all the IP based bindings (bind()
+ connect()) will seemingly succeed but the actual
packet can go out through a default gw path.
Depending on the network this happens on
it can create issues or false alarms. It can
also leak some subnet info across networks that
shouldn't be routed.
As such better be safe than sorry and bind to a
netdev to be sure it's used for xmit.
function old new delta
udhcp_send_kernel_packet 293 336 +43
send_packet 182 188 +6
bcast_or_ucast 37 43 +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 55/0) Total: 55 bytes
Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Do not pass "from" and "to" addresses as parameters, keep them in globals
function old new delta
common_traceroute_main 3426 3391 -35
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Do not byteswap ident (why we were doing it?)
function old new delta
common_traceroute_main 3544 3426 -118
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When mounting, in parallel, multiple loop devices (squashfs for the
submitter's case), the following behavior can be observed:
stat64(/path/to/image, {st_mode=S_IFREG|0644, st_size=4096, ...}) = 0
openat(AT_FDCWD, /path/to/image, O_RDWR|O_LARGEFILE) = 3
openat(AT_FDCWD, /dev/loop-control, O_RDWR|O_LARGEFILE|O_CLOEXEC) = 4
ioctl(4, LOOP_CTL_GET_FREE) = 12
close(4) = 0
openat(AT_FDCWD, /dev/loop12, O_RDWR|O_LARGEFILE) = 4
ioctl(4, LOOP_GET_STATUS64, {lo_offset=0, lo_number=12, lo_flags=LO_FLAGS_AUTOCLEAR, lo_file_name=/path/to/image, ...}) = 0
close(4) = 0
close(3) = 0
write(2, "mount: can't setup loop device\n", 31mount: can't setup loop device
) = 31
exit_group(0) = ?
+++ exited with 0 +++
The ioctl LOOP_CTL_GET_FREE has resulted in the same result for
a competing mount process. The subsequent ioctl LOOP_GET_STATUS64
fails, having succeeded for the competing mount process.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The (1 << 8) MS_ flag is MS_NOSYMFOLLOW, not MS_UNION.
As far as I see in git history of kernel and util-linux,
MS_UNION did not ever exist.
Why did it appear in our tree in 2009?...
function old new delta
mount_option_str 379 385 +6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fails as follows:
$ mount -o bind /dev/disk/by-path/pci-0000:13:00.0-scsi-0:0:3:0 /dir
mount: bad address '/dev/disk/by-path/pci-0000'
function old new delta
singlemount 1256 1273 +17
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If logging to stderr and/or syslog the -v option can be given one or
more times to increase the log verbosity. If mdev is used as hotplug
helper the log level is fixed set to 2 if mdev.log is found an appended
because there is no possiblity to pass arguments to the hotplug helper.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If mdev is run as daemon it should be possible to forward the debug
messages to syslog. This feature might be useful if mdev is run with -s
during boot too. OTOH it makes no sense for the daemon to log to
mdev.log. This can be handled by a syslog daemon way better. If the
daemon stays in the foreground due to -f, the messages are still written
to stderr as before.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If the netlink read() failed with ENOBUFS we know that we have missed at
least one message due to a socket receive buffer overrun. The only way
how to recover is to drop the old socket, open a fresh one and make a
cold-plug scan of the current system state.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The socket receive buffer turned out to be too small for real world
systems. Use the same size as udevd to be on the safe side. As this is
just a limit and the memory is not allocated by the kernel until really
needed there is actually no memory wasted.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As soon as the socket is bound it will receive messages. Make sure the
recieve buffer size is increased before the first message is received.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Avoid using same include file naming pattern as available in GLIBC.
Renamed to match grp_.h et al.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This patch moves the creation of the PID file until after syslogd has
set up signal handlers and is ready.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
/bin/login updates the preliminary UTMP record created by /bin/getty for
$LOGNAME. However, if the PID of login is not the same as getty, then
it will create a new entry. This causes GLIBC getlogin(3) to return the
string 'LOGIN' (set by getty) instead of $LOGNAME. This affects tools
like /usr/bin/logname but also various 3rd party PAM applications.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This significantly syncronises ash-signals and hush-signals tests.
function old new delta
process_wait_result 449 450 +1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Use decode_base64() from uuencode.c when uudecode/base64 applets are included.
That function is bigger than httpd's decodeBase64(), so we use the old one when
those applets are disabled. Bloat-o-meter when one of those is enabled:
function old new delta
handle_incoming_and_exit 2371 2265 -106
Signed-off-by: Xabier Oneca <xoneca@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"error: taking address of packed member of 'struct ip_udp_dhcp_packet'
may result in an unaligned pointer value" here:
udhcp_dump_packet(&packet.data);
and in other places.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Starting with linux kernel v5.4 squashfs has a more strict parameter
checking implemented. Unlike util-linux mount, busybox never supported
the sizelimit option but simply forwards it to the kernel.
Since v5.4 mounting will fail with
squashfs: Unknown parameter 'sizelimit'
Support the sizelimit parameter by setting it in the LOOP_SET_STATUS64
structure before handing it to the kernel.
While at it also add support for the offset option, which currently will
always be set to 0.
function old new delta
cut_out_ull_opt - 167 +167
singlemount 1230 1266 +36
set_loop 834 862 +28
losetup_main 479 483 +4
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/0 up/down: 235/0) Total: 235 bytes
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue, 2 Jun 2020 23:46:48 +1000
jobs: Fix waitcmd busy loop
We need to clear gotsigchld in waitproc because it is used as
a loop conditional for the waitcmd case. Without it waitcmd
may busy loop after a SIGCHLD.
This patch also changes gotsigchld into a volatile sig_atomic_t
to prevent compilers from optimising its accesses away.
Fixes: 6c691b3e5099 ("jobs: Only clear gotsigchld when waiting...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This change also incorporates other changes to bring us closer to upstream.
function old new delta
dowait 553 636 +83
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 10 Apr 2020 21:03:09 +1000
jobs: Fix infinite loop in waitproc
After we changed the resetting of gotsigchld so that it is only
done if jp is NULL, we can now get an infinite loop in waitproc
if gotsigchld is set but there is no outstanding child because
everything had been waited for previously without gotsigchld being
zeroed.
This patch fixes it by always zeroing gotsigchld as we did before.
The bug that the previous patch was trying to fix is now resolved
by switching the blocking mode to DOWAIT_NORMAL after the specified
job has been completed so that we really do wait for all outstanding
dead children.
Reported-by: Harald van Dijk <harald@gigawatt.nl>
Fixes: 6c691b3e5099 ("jobs: Only clear gotsigchld when waiting...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
dowait 553 631 +78
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream tried it, and then reverted by:
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue, 26 May 2020 23:19:05 +1000
parser: Fix double-backslash nl in old-style command sub
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If server responds with ETag then next time client can resend it via If-None-Match header.
Then httpd will check if file wasn't modified and if not return 304 Not Modified status code.
The ETag value is constructed from file's last modification date in unix epoch and it's size:
"hex(last_mod)-hex(file_size)" e.g. "5e132e20-417" (with quotes).
That means that it's not completely reliable as hash functions but fair enough.
The same form of ETag is used by Nginx so load balancing of static content is safe.
function old new delta
handle_incoming_and_exit 2135 2201 +66
http_response 88 96 +8
send_headers 676 683 +7
parse_conf 1362 1365 +3
http_response_type 22 24 +2
send_file_and_exit 847 841 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/1 up/down: 86/-6) Total: 80 bytes
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The Last-Modified header is used for caching.
The client (browser) will send back the received date to server via If-Modified-Since request header.
But both headers MUST be an RFC 1123 formatted string.
And the formatting consumes resources on request parsing and response generation.
Instead we can use ETag header.
This simplifies logic and the only downside is that in JavaScript the document.lastModified will return null.
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
RFC 2616 sec. 14.18 says that server MUST send Date header.
But in fact the header make sense only for Cache-Control and can be omitted.
In the same time the Date eats power, CPU and network resources which are critical for embedded systems.
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
HTTP v1.1 was released in 1999 year and it's time to update BB HTTPD.
Browsers may behave badly with HTTP/1.0
E.g. Chrome does not send the If-None-Match header with ETag.
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The glibc implementation changed for settimeofday, resulting in "invalid
argument" error when attempting to set both timezone and time with a single
call. Fix this by calling settimeofday twice
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is a recent change in GNU grep as well (after 3.1)
function old new delta
grep_file 1215 1228 +13
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
PLATFORM_LINUX is a hidden configuration option which is disabled by
default and enabled at over a hundred locations for features that are
deemed to be Linux specific.
The only effect of PLATFORM_LINUX is to control compilation of
libbb/match_fstype.c. This file is only needed by mount and umount.
Remove all references to PLATFORM_LINUX and compile match_fstype.c
if mount or umount is enabled.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Duplicate options are currently overridden (only the last option is kept).
This leads to unexpected behavior when using long options.
The patch adds support for long options in compliance with RFC 3396.
Fixes#13136.
function old new delta
udhcp_run_script 601 725 +124
optitem_unset_env_and_free - 38 +38
putenvp 46 59 +13
static.xmalloc_optname_optval 718 717 -1
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/1 up/down: 175/-1) Total: 174 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The "noprefixroute" option suppresses automatic generation of a routing
table entry based on the interface's ip address.
The ifa_flags field has only 8 bit. If higher bits are set,
rta_tb[IFA_FLAGS] has to be used instead.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With bash's read builtin it is possible to read from a file (e.g.
device-tree) until the first '\0' character:
IFS= read -r -d '' VARIABLE < file
In busybox ash the -d extension is also implemented, but checking the
read character for '\0' has to be performed after comparing with the
delimiter.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Remove new lines \n and some semicolons ;. This minimize page style size from 655 to 604
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
dname_dec: now iterates over the packet only once.
convert_dname: remove redundant checks and code shrink.
While testing I've noticed that some of the tests didn't compile
properly, so I fixed them.
function old new delta
dname_dec 286 267 -19
dname_enc 166 143 -23
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-42) Total: -42 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some editors (like vim) use renaming strategy to save file. That means
they save a file to some random name and then rename it to final
location. The advantage is that such save is atomic.
However, crontab -e holds open fd to the temporary file, meaning it
never sees the changes. The temporary file needs to be re-opened after
the editor terminates for the changes to properly save.
Fixes#12491
Signed-off-by: Gray Wolf <wolf@wolfsden.cz>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Code shrink and prevention of possible out of bounds access.
function old new delta
nth_string 36 26 -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-10) Total: -10 bytes
text data bss dec hex filename
981342 16915 1872 1000129 f42c1 busybox_old
981332 16915 1872 1000119 f42b7 busybox_unstripped
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
fill_envp now iterates over the packet only once instead of a few hundred times
using the new option scanner.
function old new delta
udhcp_scan_options - 189 +189
putenvp - 46 +46
init_scan_state - 22 +22
udhcp_get_option 227 104 -123
udhcp_run_script 835 601 -234
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 0/2 up/down: 257/-357) Total: -100 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
busybox will remove directory symlinks, which is at
odds with common layouts that have some of
bin/lib/lib32/lib64 symlinked.
this adds a exludelist for critcal and often symlinked
directories.
Fixes: Bug 12551
function old new delta
remove_file_array 139 231 +92
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
On Alpine, some users use /dev/null as a home directory. When removing
such a user with `deluser --remove-home` this causes the /dev/null
device file to be removed which is undesirable. To prevent this pitfall,
check if the home directory specified for the user is an actual
directory (or a symlink to a directory).
Implementations of similar tools for other operating systems also
implement such checks. For instance, the OpenBSD rmuser(1)
implementation [0].
[0]: https://github.com/openbsd/src/blob/b69faa6c70c5bfcfdddc6138cd8e0ee18cc15b03/usr.sbin/adduser/rmuser.perl#L143-L151
function old new delta
deluser_main 337 380 +43
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit d1b75e184 (httpd: permit non-default home directory with NOMMU
enabled) only works when used with the '-f' (foreground) option.
When '-f' isn't specified and NOMMU is enabled bb_daemonize_or_rexec()
is called to daemonize the server. Since the server process has been
re-execed the previous patch results in the xchdir() not being called.
Fix this by resetting the re_execed variable in this case.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Prior to the patch, both -f and --first-only are in all cases either
no-op or ignored.
Without --tabs, --first-only is the default so specifying it is a no-op.
With --tabs, --all is implied, and --first-only is intended to reset this.
function old new delta
expand_main 690 694 +4
Signed-off-by: Mark Edgar <medgar123@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Incorporated valid_domain_label into good_hostname to simplify the implementation.
function old new delta
static.xmalloc_optname_optval 973 958 -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-15) Total: -15 bytes
text data bss dec hex filename
993144 16915 1872 1011931 f70db busybox_old
993129 16915 1872 1011916 f70cc busybox_unstripped
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When ENABLE_FEATURE_WGET_OPENSSL is enabled, correctly implement TLS
verification by default. And only ignore verification errors, if
--no-check-certificate was passed.
Also note, that previously OPENSSL implementation did not implement
TLS verification, nor printed any warning messages that verification
was not performed.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1879533
CVE-2018-1000500
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
show_history() checks that its argument in non-null so there's
no need to repeat the test at call sites.
function old new delta
historycmd 25 17 -8
builtin_history 29 21 -8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-16) Total: -16 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
mim runs scripts from a specification file which can be thought
of as an extremely limited Makefile. Neither make variables nor
dependencies are supported. By default the file 'Mimfile' is read.
An example:
hello:
echo hello $1
clean:
rm -rf *
The command 'mim' or 'mim hello' will echo 'hello'. Unlike 'make'
arguments after the first are available to the script; they don't
specify additional targets.
mim isn't enabled by default. Enabling it increases the size of the
binary by about 500 bytes.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since commit 7eb8eecbb (ash: eval: Add assignment built-in support
again) building BusyBox with the 'command' built-in disabled fails.
parse_command_args() only needs to be called when the 'command'
built-in is run. Which it won't be if it's disabled.
v2: Avoiding infinite loops is good, too. Thanks, Harald van Dijk.
Reported-by: Deweloper <deweloper@wp.pl>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When BusyBox is compiled with NOMMU enabled running httpd with
the '-h' option fails even if the specified directory exists:
$ ls -d www
www
$ busybox httpd -fvvvp 8080 -h www
...
... try to access http://localhost:8080/www
...
httpd: can't change directory to 'www': No such file or directory
The parent process executes xchdir("www"). When a connection is accepted
it's handled by re-executing httpd in inetd mode. The child process
inherits the current directory "www" and tries to change directory again
to "www", which fails.
Omit the call to xchdir() when httpd is re-executed.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
From POSIX.1-2008:
The pattern_list's value shall consist of one or more patterns
separated by <newline> characters;
As such, given patterns need to be split at newline characters. Without
doing so, busybox grep will interpret the newline as part of the pattern
which is not in accordance with POSIX.
See also: https://bugs.busybox.net/show_bug.cgi?id=12721
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Grep currently special-cased empty pattern file to be the same as
pattern file with one empty line (empty pattern). That does mirror how
GNU grep behaves, except when -x is provided. In that case .* pattern
needs to be used instead.
Signed-off-by: Gray Wolf <wolf@wolfsden.cz>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since commit 1ff7002b1 (xargs: fix handling of quoted arguments, closes
11441) the -n option hasn't worked properly:
$ echo 1 2 3 | xargs -n 1 echo
1
2
3
$
Because state is now remembered between calls to process_stdin() it's
necessary to update the state before any premature return.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When using GNU Make >=4.3, the KBUILD_STR() definition interferes badly
with dependency checks during build, and forces a complete rebuild every
time Make runs.
In if_changed_rule, Kconfig checks if the command used to build a file
has changed since last execution. The previous command is stored in the
generated .<file>.o.cmd file. For example applets/.applets.o.cmd defines
a "cmd_applets/applets.o" variable:
cmd_applets/applets.o := gcc ... -D"KBUILD_STR(s)=#s" ...
Here the '#' should be escaped with a backslash, otherwise GNU Make
interprets it as starting a comment, and ignore the rest of the
variable. As a result of this truncation, the previous command doesn't
equal the new command and Make rebuilds each target.
The problem started to appear when GNU Make 4.3 (released January 2020),
introduced a backward-incompatible fix to macros containing a '#'. While
the above use of '#', a simple Make variable, still needs to be escaped,
a '#' within a function invocation doesn't need to be escaped anymore.
As Martin Dorey explained on the GNU Make discussion [1], the above
declaration is generated from make-cmd, defined as:
make-cmd = $(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1))))
Since GNU Make 4.3, the first argument of subst should not have a
backslash. make-cmd now looks for literally \# and doesn't find it, and
as a result doesn't add the backslash when generating .o.cmd files.
[1] http://savannah.gnu.org/bugs/?20513
We could fix it by changing make-cmd to "$(subst #,\#,...)", but to
avoid compatibility headaches, simply get rid of the KBUILD_STR
definition, as done in Linux by b42841b7bb62 ("kbuild: Get rid of
KBUILD_STR"). Quote the string arguments directly rather than asking the
preprocessor to quote them.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The official Info-Zip unzip creates the dir if it doesn't exist.
Signed-off-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Wed, 12 Sep 2018 14:27:16 +0800
expand: Fix multiple issues with EXP_DISCARD in evalvar
The commit 3cd538634f71538370f5af239f342aec48b7470b broke parameter
expansion in multiple ways because the EXP_DISCARD flag wasn't set
or tested for various cases:
$ src/dash -c 'var=; echo ${var:+nonempty}'
nonempty
$ src/dash -u -c 'unset foo bar; echo ${foo+${bar}}'
dash: 1: bar: parameter not set
$ src/dash -c 'foo=bar; echo ${foo=BUG}; echo $foo'
barBUG
bar
$
This patch fixes them by introducing a new discard variable that
tracks whether the extra word should be discarded or not when it
is parsed.
Reported-by: Martijn Dekker <martijn@inlv.org>
Fixes: 3cd538634f71 ("expand: Do not reprocess data when...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream patch:
Date: Wed, 30 May 2018 02:06:03 +0800
expand: Do not reprocess data when expanding words
Currently various paths will reprocess data when performing word
expansion. For example, expari will skip backwards looking for
the start of the arithmetic expansion, while evalvar will skip
unexpanded words manually.
This is cumbersome and error-prone. This patch fixes this by
making word expansions proceed in a linear fashion. This means
changing argstr and the various expansion functions such as expari
and subevalvar to return the next character to be expanded.
This is inspired by similar code from FreeBSD. However, we take
things one step further and completely remove the manual word
skipping in evalvar. This is accomplished by introducing a new
EXP_DISCARD flag that tells argstr to only parse and not produce
any actual expansions.
Incidentally, argstr will now always NUL-terminate the expansion
unless the EXP_WORD flag is set. This is because all but one
caller of argstr wants the result to be NUL-termianted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Also includes two one-line follow-up fixes:
expand: Eat closing brace for length parameter
if (subtype == VSLENGTH) {
+ p++;
if (flag & EXP_DISCARD)
expand: Fix double-decrement in argstr
- newloc = expdest - (char *)stackblock() - end;
+ newloc = q - (char *)stackblock() - end;
and changes in code for bash substring extensions.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Following recent work on evalcommand() a TRACE statement to report
the status of a forked command was left in the wrong place.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sun, 11 Nov 2007 15:27:00 +0800
Expand here-documents in the current shell environment
Previously we always expanded here-documents in a subshell. This is
contrary to the POSIX specification and how other shells behave. What's
more this slows down many expansions due to the extra fork (however, it
must be said that it is possible for it speed up certain expansions by
running it simultaneously with the command on two CPUs).
This patch move the expansion into the current shell environment.
Test case:
unset a
cat <<- EOF > /dev/null
${a=NOT}
EOF
echo ${a}BAD
Old result:
BAD
New result:
NOTBAD
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 19 Nov 2018 18:43:58 +0800
parser: Do not push token back before parseheredoc
When we read the first token in list() we use peektoken instead
of readtoken as the following code needs to use the same token
again. However, this is wrong when we're in a here-document as
it will clobber the saved token without resetting the tokpushback
flag.
This patch fixes it by doing the tokpushback after parseheredoc
and setting lasttoken again if parseheredoc was called.
Reported-by: Ron Yorston <rmy@frippery.org>
Fixes: 7c245aa8ed33 ("[PARSER] Simplify EOF/newline handling in...")
Fixes: ee5cbe9fd6bc ("[SHELL] Optimize dash -c "command" to avoid a fork")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 29 Mar 2019 13:49:59 +0800
parser: Fix old-style command substitution here-document crash
... This is caused by the recent change to
save/restore here-docment list around command substitutions. In
doing so we must finish existing here-documents prior to restoring
the old here-document list. This is done for new-style command
substitutions but not for old-style.
This patch fixes it by doing it for both.
Fixes: 51e2d88d6e51 ("parser: Save/restore here-documents in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 1 Jun 2018 18:25:29 +0800
expand: Ensure result is escaped in cvtnum
The minus sign generated from arithmetic expansion is currently
unquoted which causes anomalies when the result is used in where
the quoting matters.
This patch fixes it by explicitly calling memtodest on the result
in cvtnum.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 31 May 2018 01:51:48 +0800
memalloc: Avoid looping in growstackto
Currently growstackto will repeatedly call growstackblock until
the requisite size is obtained. This is wasteful. This patch
changes growstackblock to take a minimum size instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 14 Dec 2018 13:52:02 +0800
eval: Only restore exit status on exit/return
We unconditionally restore the saved status in exitreset, which
is incorrect as we only want to do it for exitcmd and returncmd.
This patch fixes the problem by introducing EXEND.
Reported-by: Martijn Dekker <martijn@inlv.org>
Fixes: da30b4b78769 ("[BUILTIN] Exit without arguments in a trap...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixes exitcode_trap4.tests.
Upstream commit:
Date: Mon, 6 Oct 2014 21:51:26 +0800
Return without arguments in a trap should use status outside traps
POSIX now requires that return without arguments in a trap should
return the last command status prior to executing traps. This
patch implements this behaviour.
Incidentally this also changes the behaviour of return without
arguments in a loop conditional to use the last exit status in
the body as opposed to the last command in the conditional when
there is one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since commit d81af7216 (ash: eval: Reap zombies after built-in commands
and functions) if the shell is compiled with SH_STANDALONE and SH_NOFORK
enabled nofork applets potentially return the incorrect status.
The status value returned by evalcommand() in this case is obtained from
exitstatus in a call to waitforjob(NULL). This overwrites the status
set for nonfork applets.
If this commit seems familiar it's essentially a reversion of commit
5ccb0e92fa (ash: return exit status of nofork applets). What was correct
in 2016 is wrong in 2020 and vice versa.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 28 May 2018 00:17:39 +0800
expand: Merge syntax/quotes in memtodest with flags
The function arguments syntax and quotes are both derived from
the expansion flags. As syntax is only used by memtodest we do
not need to maintain it outside of the function at all.
The only place that uses something other than BASESYNTAX or DQSYNTAX
is exptilde. However in that case DQSYNTAX has exactly the same
effect as SQSYNTAX.
This patch merges these two arguments into a single flags. The
macro QUOTES_KEEPNUL has been renamed to EXP_KEEPNUL in order
to keep the namespace separate.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 31 May 2018 01:15:34 +0800
eval: Always set localvar_stop
The variable localvar_stop is set iff vlocal is true. gcc doesn't
get this so we get a spurious warning.
This patch fixes this by always calling pushlocalvars with vlocal
and making it only actually do the push if vlocal is non-zero.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:55 +0800
eval: Replace with listsetvar with mklocal/setvareq
This patch replaces listsetvar with mklocal/setvareq. As we now
determine special built-in status prior to variable assignment, we
no longer have to do a second pass listsetvar. Instead we will
call setvareq directly instead of mklocal when necessary.
In order to do this mklocal can now take a flag in order to mark
a variable for export.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:54 +0800
eval: Fail immediately with redirections errors for simple command
Previously, dash would continue to perform variable expansions
even if a redirection error occured. This patch changes it so
that it fails immediately.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:52 +0800
eval: Add assignment built-in support again
This patch adds assignment built-in support that used to exist
in dash prior to 0.3.8-15. This is because it will soon be part
of POSIX, and the semantics are now much better defined.
Recognition is done at execution time, so even "command -- export"
or "var=export; command $var" should work.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:41 +0800
jobs: Only clear gotsigchld when waiting for everything
The gotsigchld flag is always cleared in dowait but not all callers
of dowait will wait for everything. In particular, when jp is set
we only wait until the set job isn't running anymore.
This patch fixes this by only clearing gotsigchld if jp is unset.
It also changes the waitcmd to actually set jp which corresponds
to the behaviour of bash/ksh93/mksh.
The only other caller of dowait that doesn't wait for everything
is the jobless reaper. This is in fact redundant now that we wait
after every simple command. This patch removes it.
Finally as every caller of dowait needs to wait until either the
given job is not running, or until all terminated jobs have been
processed, this patch moves the loop into dowait itself.
Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Mon, 7 May 2018 00:40:34 +0800
jobs - Do not block when waiting on SIGCHLD
Because of the nature of SIGCHLD, the process may have already been
waited on and therefore we must be prepared for the case that wait
may block. So ensure that it doesn't by using WNOHANG.
Furthermore, multiple jobs may have exited when gotsigchld is set.
Therefore we need to wait until there are no zombies left.
Lastly, waitforjob needs to be called with interrupts off and
the original patch broke that.
Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While at it, removed INT_ON/OFF in waitforjob() - it must be called
from INT_OFF region anyway.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 26 Mar 2018 23:55:50 +0800
eval: Reap zombies after built-in commands and functions
Currently dash does not reap dead children after built-in commands
or functions. This means that if you construct a loop consisting
of solely built-in commands and functions, then zombies can hang
around indefinitely.
This patch fixes this by reaping when necessary after each built-in
command and function.
Reported-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:51 +0800
exec: Never rehash regular built-ins
As regular (including special) built-ins can never be overridden,
we should never remove them from the hash table.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Sat, 19 May 2018 02:39:50 +0800
exec: Stricter pathopt parsing
This patch changes the parsing of pathopt. First of all only
%builtin and %func (with arbitrary suffixes) will be recognised.
Any other pathopt will be treated as a normal directory.
Furthermore, pathopt can now be specified before the directory,
rather than after it. In fact, a future version may remove support
for pathopt suffixes.
Wherever the pathopt is placed, an optional % may be placed after
it to terminate the pathopt.
This is so that it is less likely that a genuine directory containing
a % sign is parsed as a pathopt.
Users of padvance outside of exec.c have also been modified:
1) cd(1) will always treat % characters as part of the path.
2) chkmail will continue to accept arbitrary pathopt.
3) find_dot_file will ignore the %builtin pathopt instead of trying
to do a stat in the accompanying directory (which is usually the
current directory).
The patch also removes the clearcmdentry optimisation where we
attempt to only partially flush the table where possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:48 +0800
exec: Do not allocate stack string in padvance
Many callers of padvance immediately free the allocated string
so this patch moves the stalloc call to the caller. Instead of
returning the allocated string, padvance now returns the length
to allocate (this may be longer than the actual string length,
even including the NUL). For the case where we would previously
return NULL, we now return -1.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:46 +0800
memalloc: Add growstackto helper
This patch adds the growstackto helper which repeatedly calls
growstackblock until the requested size is reached.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Sat, 19 May 2018 02:39:42 +0800
parser: Save/restore here-documents in command substitution
This patch changes the parsing of here-documents within command
substitution, both old style and new style. In particular, the
original here-document list is saved upon the beginning of parsing
command substitution and restored when exiting.
This means that here-documents outside of command substitution
can no longer be filled by text within it and vice-versa.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:40 +0800
mkinit: Split reset into exitreset and reset
Previously reset was called after exitshell. This was changed
so that it was called before exitshell because certain state needed
to be reset in order for the EXIT trap to work.
However, this caused issues because certain other states (such
as local variables) should not be reset. This patch fixes this
by creating a new function exitreset that is called prior to
exitshell and moving reset back to its original location.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 29 Apr 2019 19:13:37 +0500
expand: Fix trailing newlines processing in backquote expanding
According to POSIX.1-2008 we should remove newlines only at the end of
the substitution. Newlines-only substitions causes dash to remove
newlines before beggining of the substitution. The following code:
cat <<END
1
$(echo "")
2
END
prints "1<newline>2" instead of expected "1<newline><newline>2".
This patch fixes trailing newlines processing in backquote expanding.
Signed-off-by: Nikolai Merinov <n.merinov@inango-systems.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 27 May 2019 13:39:37 +0800
parser: Only accept single-digit parameter expansion outside of braces
This patch should fix the problem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 15 Dec 2018 18:49:31 +0100
shell: Fix clang warnings about "string plus integer"
Building with clang results in some warnings about integer values being
added to strings.
While the code itself is fine and the warnings are indeed harmless,
fixing them also makes the semantic more explicit: what it is actually
being increased is the address which points to the start of the string
in order to skip the initial character when some conditions are met.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Mon, 19 Nov 2018 18:00:32 +0800
eval: Use the correct expansion mode for fd redirection
It has been reported that
echo test >&$EMPTY_VARIABLE
causes dash to segfault. This is a symptom of the bigger problem
that dash tries to perform pathname expansion as well as field
splitting on the word after >& and <&. This is wrong and this
patch fixes it to use the same expansions as done on a normal
redirection.
Reported-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 28 May 2018 17:09:48 +0800
expand: Fix skipping of command substitution when trimming in evalvar
When we are trimming an unset variable in evalvar, any embedded
command substitution that should have been skipped are not. This
can cause them to be evaluated later should there be other command
substitutions in the same input word.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Fri, 7 Sep 2018 10:34:14 +0200
main: Print \n upon EOF (CTRL-D) when run interactively
Exiting dash via a ^D instead of with "exit" causes dash to forget to
print a newline.
sh-3.1$ sh
sh-3.1$ ^D
sh-3.1$ dash
$ sh-3.1$
It is more neat and tidy to send a newline similarly to what bash does,
so it doesn't make the next prompt of the parent shell look ugly.
Suggested by jidanni.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
[reworded the patch description]
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Bug-Debian: http://bugs.debian.org/476422
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sun, 27 May 2018 17:31:57 +0800
expand: Use HOME in tilde expansion when it is empty
Currently if HOME is set to empty tilde expansion will fail, i.e.,
it will remain as a literal tilde. This patch changes it to
return the empty string as required by POSIX.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:49 +0800
builtin: Mark more regular built-ins
This patch marks the following built-ins as regular, meaning that
they cannot be overriden using PATH search:
hash
pwd
type
ulimit
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:45 +0800
jobs: Replace some uses of fmtstr with stpcpy/stpncpy
Some uses of fmtstr, particularly the ones without a format string,
can be replaced with stpcpy or stpncpy. This patch does that so
we don't have to introduce unnecessary format strings in order to
silence compiler warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:44 +0800
output: Fix fmtstr return value
The function fmtstr is meant to return the actual length of output
produced, rather than the untruncated length.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:38 +0800
main: Only set savestatus in exitcmd
Currently exitcmd sets exitstatus and then savestatus if the latter
was previously set. In fact, as exitcmd always raises an exception
and will either end up in the setjmp call in main() or exitshell(),
where exitstatus is always replaced by savestatus if set, we only
need to set savestatus.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon Oct 6 10:39:47 2014 +0800
[BUILTIN] Exit without arguments in a trap should use status outside traps
POSIX now requires that exit without arguments in a trap should
return the last command status prior to executing traps. This
patch implements this behaviour.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Keeping up with upstream (in our case, 'before patch' code is not buggy).
Upstream commit:
Date: Fri, 11 May 2018 23:41:25 +0800
parser: Fix incorrect eating of backslash newlines
With the introduction of synstack->syntax, a number of references
to the syntax variable was missed during the conversion. This
causes backslash newlines to be incorrectly removed in single
quote context.
This patch also combines these calls into a new helper function
pgetc_top.
Fixes: ab1cecb40478 ("parser: Add syntax stack for recursive...")
Reported-by: Leah Neukirchen <leah@vuxu.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Adding previously skipped "readtoken1(pgetc_eatbnl(), DQSYNTAX..." changes
from upstream commit:
Date: Thu Mar 8 08:37:11 2018 +0100
Author: Harald van Dijk <harald@gigawatt.nl>
parser: use pgetc_eatbnl() in more places
dash has a pgetc_eatbnl function in parser.c which skips any
backslash-newline combinations. It's not used everywhere it could be.
There is also some duplicated backslash-newline handling elsewhere in
parser.c. Replace most of the calls to pgetc() with calls to
pgetc_eatbnl() and remove the duplicated backslash-newline handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As reported in bug 11441 when presented with a large number of quoted
arguments xargs can return 'argument line too long':
seq 10000 29999 | sed -e 's/^/"/' -e 's/$/"/' | busybox xargs echo
This happens because the variant of process_stdin() which handles quoted
arguments doesn't preserve state between calls. If the allowed number
of characters is exceeded part way through a quoted argument the next
call to process_stdin() incorrectly treats the terminating quote as a
starting quote, thus quoting all of the argument separators.
function old new delta
process_stdin 274 303 +29
xargs_main 731 745 +14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 43/0) Total: 43 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Handling of string searches in colon commands (e.g ':/pat1/,/pat2/cmd')
differ from standard vi:
- As reported in bug 10321 such searches can't be repeated using the
'n' command. This is because the last search pattern isn't updated.
- The search also can't be repeated using the command '://' because
an empty search pattern doesn't imply the use of the last search
pattern.
- Such searches should start on the line after the current line,
otherwise '://' never moves to the next occurrence of the pattern.
This can also affect other cases where line ranges are specified
using search patterns.
Fix these various issues.
function old new delta
get_one_address 325 342 +17
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The dash maintainer recently posted a fix for issues with expanding
PS1. These had already been fixed differently in BusyBox ash. Borrow
a couple of improvements:
- Use a single call to setjmp() to trap errors in both readtoken1()
and expandarg().
- In case of error set the prompt to the literal value of PS1 rather
than the half-digested nonsense in stackblock() which might include
ugly control characters.
function old new delta
expandstr 353 300 -53
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
For some use cases, having logs with more than 1 second accuracy can be
helpful. Add an option to include milliseconds when adding a timestamp in
HH:MM:SS.mmm format, similar to syslog-ng with fraq_digits(3) or journalctl
-o short-precise.
For simplicity, abuse the remaining space in the buffer used by ctime to add
the millieconds (overwriting year).
function old new delta
timestamp_and_log 401 448 +47
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Before this change, a request to reboot could be "overwritten" by e.g.
SIGHUP.
function old new delta
init_main 709 793 +84
packed_usage 33273 33337 +64
run_actions 109 117 +8
stop_handler 87 88 +1
check_delayed_sigs 340 335 -5
run 214 198 -16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/2 up/down: 157/-21) Total: 136 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This adds -R option to grep similar to GNU grep. It is the same as -r
but also dereferences symbolic links to directories.
function old new delta
grep_main 834 850 +16
packed_usage 33362 33368 +6
grep_file 1440 1441 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Tomi Leppanen <tomi.leppanen@jolla.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
stime() has been deprecated in glibc 2.31 and replaced with
clock_settime(). Let's replace the stime() function calls with
clock_settime() in preperation.
function old new delta
rdate_main 197 224 +27
clock_settime - 27 +27
date_main 926 941 +15
stime 37 - -37
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 2/0 up/down: 69/-37) Total: 32 bytes
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When IF_DESKTOP is not defined, chown and chgrp only takes option -R -h,
However the usage output of chgrp is wrong:
$ ./busybox.nosuid chown
Usage: chown [-Rh]... USER[:[GRP]] FILE...
$ ./busybox.nosuid chgrp
Usage: chgrp [-RhLHP]... GROUP FILE...
$ ./busybox.nosuid chgrp -H group dummy
chgrp: invalid option -- 'H'
Usage: chgrp [-RhLHP]... GROUP FILE...
The chgrp is now a wrapper of chown, so the recognized options shall be the same.
This is introduced by 34425389e0
I would expect the correct behavior shall be the same as chown.
So suggest the below patch, the behavior shall be:
$ ./busybox.nosuid chgrp
Usage: chgrp [-Rh]... GROUP FILE...
Signed-off-by: Shuang Liu <sliu@de.adit-jv.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
> 2018-07-25:
> ntpd: increase MIN_FREQHOLD by 3
> This means we'll start correcting frequency ~5 minutes after start,
> not ~3.5 ones.
> With previous settings I still often see largish ~0.7s initial offsets
> only about 1/2 corrected before frequency correction kicks in,
> resulting in ~200ppm "correction" which is then slowly undone.
Review of real-world results of the above shows that with small
initial offsets, freq correction can be allowed to kick in sooner,
whereas with large (~0.8s) offsets, we still start freq correction
a bit too soon.
Let's rebalance this a bit.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add support for querying and parsing SRV DNS records.
function old new delta
send_queries 1711 1865 +154
qtypes 72 80 +8
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Under some circumstances, a DNS reply might contain no resource records,
e.g. when a valid domain is queried that does not have records of the
requested type.
Example with nslookup from BIND dnsutils:
$ nslookup -q=SRV example.org
Server: 10.11.12.13
Address: 10.11.12.13#53
Non-authoritative answer:
*** Can't find example.org: No answer
Currently the busybox nslookup applet simply prints nothing after the
"Non-authoritative answer:" line in the same situation.
This change modifies nslookup to either print "Parse error" or "No answer"
diagnostics, depending on the parse_reply() return value.
function old new delta
send_queries 1676 1711 +35
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
huft_build() has way too many params
function old new delta
inflate_block 1293 1281 -12
huft_build 1085 1058 -27
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-39) Total: -39 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
> I'm trying to connect to a Korenix 3005 switch through telnet
> for management purposes, and all is well except for the backspace character
> - seems like my switch doesn't handle it too well and instead of erasing
> the last character all it does is print some garbage to the screen.
> I've had the same issue before while using putty, but saw a solution that
> suggests to enable "Telnet special commands" in the options menu, and it
> worked.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When crond is built with FEATURE_CROND_SPECIAL_TIMES enabled, it creates
a file called 'crond.reboot' at CONFIG_PID_FILE_PATH, but if
FEATURE_PIDFILE is disabled, this will be an empty string and the file
will be created in the root directory, which is undesirable.
This commit makes PID_FILE_PATH depend on FEATURE_CROND_SPECIAL_TIMES as
well as FEATURE_PIDFILE so that you get sensible behaviour in crond when
FEATURE_PIDFILE is switched off.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If sub is empty, avoids an infinite loop.
function old new delta
count_strstr 45 63 +18
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Changed safe_read to be symmetrical to safe_write, it shall
never return EINTR because it calls read multiple times,
the error is considered transient.
function old new delta
safe_read 44 57 +13
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some 32-bit architectures no longer have the 32-bit time_t syscalls.
Instead they have suffixed syscalls that returns a 64-bit time_t. If
the architecture doesn't have the non-suffixed syscall and is using a
64-bit time_t let's use the suffixed syscall instead.
This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel
headers.
If an architecture only supports the suffixed syscalls, but is still
using a 32-bit time_t report a compilation error. This avoids us have to
deal with converting between 64-bit and 32-bit values. There are
currently no architectures where this is the case.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some 32-bit architectures no longer have the 32-bit time_t syscalls.
Instead they have suffixed syscalls that returns a 64-bit time_t. If
the architecture doesn't have the non-suffixed syscall and is using a
64-bit time_t let's use the suffixed syscall instead.
This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel
headers.
If an architecture only supports the suffixed syscalls, but is still
using a 32-bit time_t report a compilation error. This avoids us have to
deal with converting between 64-bit and 32-bit values. There are
currently no architectures where this is the case.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some 32-bit architectures no longer have the 32-bit time_t syscalls.
Instead they have suffixed syscalls that returns a 64-bit time_t. If
the architecture doesn't have the non-suffixed syscall and is using a
64-bit time_t let's use the suffixed syscall instead.
This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel
headers.
If an architecture only supports the suffixed syscalls, but is still
using a 32-bit time_t fall back to the libc call.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The following caused udhcpc to segfault:
busybox udhcpc -i lo -s /dev/null -x 0x3d:
function old new delta
udhcp_str2optset 629 641 +12
Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The output of the command "route -n -A inet6" may be corrupted
due to partially initialized structure snaddr6 in the function
INET6_displayroutes.
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
GNU tee does this only with -p, which we don't have yet.
function old new delta
tee_main 306 295 -11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Without the 'U' unsigned suffix, gcc will throw a "integer constant is
so large that it is unsigned" warning.
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some hosting services like sourceforge perform a lot of relocations
before actually serving the file. Example of current limitation:
busybox wget http://sourceforge.net/projects/fluxbox/files/fluxbox/1.3.7/fluxbox-1.3.7.tar.xz
Connecting to sourceforge.net (216.105.38.13:80)
Connecting to sourceforge.net (216.105.38.13:443)
Connecting to sourceforge.net (216.105.38.13:443)
Connecting to sourceforge.net (216.105.38.13:443)
Connecting to downloads.sourceforge.net (216.105.38.13:443)
wget: too many redirections
Signed-off-by: David Demelier <markand@malikania.fr>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Converted a few 16-bit variables and small arrays to 32-bit.
Stopped pulling desc->FOO members into temporary local variables
in gen_bitlen(): on register-starved arches, this is a loss,
temporaries go into stack slots.
Sprinkled a few "const" on pointer arguments.
function old new delta
pack_gzip 742 745 +3
gen_codes 101 97 -4
build_tree 886 833 -53
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 3/-57) Total: -54 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With this change, GNU gzip -n and BusyBox gzip now produce identical output
assuming that CONFIG_GZIP_FAST=2.
>> Excuse me, but I wonder one thing: Why should we follow
>> strictly with gzip on the no-options default behavior?
> First, the default 6 compression level is a de-facto standard. BSD gzip
> and Apple gzip (on macOS) use this default as well. So there is a
> reasonable expectation that different gzip implementations act the same.
> For instance, if the default for busybox gzip becomes 9, then someone
> writing a script using busybox gzip could reasonably expect that the
> compression level will still be 9 when the same script is run on another
> system. That would be wrong. Implementations should not deviate from
> de-facto standards without a strong reason.
>
> Second, the inherent reason for this default has not gone away. While
> processor speeds have exploded since the default was set, so has the
> typical size of compressed files. Multiple gigabytes are nothing unusual
> these days. And gzip is often used for compression on the fly, precisely
> because it offers a good compromise between speed and compression ratio.
> So I believe 6 continues to be a reasonable default.
function old new delta
deflate 939 927 -12
Signed-off-by: Daniel Edgecumbe <git@esotericnonsense.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With this change and CONFIG_GZIP_FAST=2, CONFIG_FEATURE_GZIP_LEVELS=y,
GNU gzip and BusyBox gzip now produce identical output at each compression
level (excluding 1..3, as BusyBox does not implement these levels).
Signed-off-by: Daniel Edgecumbe <git@esotericnonsense.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This matches the behaviour of both GNU dc (as specified in
its man page), and BSD dc (where stack_popstring() pops
only if the head is a string.)
Add a couple of tests to verify this behavior.
function old new delta
zxc_vm_process 6882 6884 +2
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This prevents first update from showing incorrect CPU usage data
function old new delta
handle_input 620 643 +23
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit d1a2fa2a4 (ash: catch error in arithmetic expansion in PS1)
catches all exceptions raised by expandarg(). Some exceptions, such as
the EXEXIT raised when command expansion is used, are expected:
export PS1='$(echo "$ ")'
These should be processed normally or the shell hangs at the prompt.
function old new delta
expandstr 344 353 +9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 9/0) Total: 9 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I noticed that the 'used' values from busybox free and
procps-ng free differed so I looked into why. It turns
out that procps-ng uses the "SReclaimable" value as
part of the cached value.
This was changed in
procps-ng commit 05d751c4f076a2f0118b914c5e51cfbb4762ad8e
function old new delta
free_main 633 653 +20
Signed-off-by: Lukas Rusak <lorusak@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Resolved a TODO by adding support for gateway_nip parameter.
function old new delta
udhcp_run_script 792 835 +43
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently start-stop-daemon fails when using both the -c option (set uid)
and -N option (set niceness/priority) as it first drops privileges and then
tries to increase the priority. This patch changes the order of execution.
Signed-off-by: Aitor Esteve Alvarado <aesteve@singularaircraft.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Adds the -d option to run mdev in daemon mode handling hotplug events
from the kernel like udev. If the system generates many hotplug events
this mode of operation will consume less resources than registering
mdev as hotplug helper or using the uevent applet.
function old new delta
daemon_loop - 152 +152
initial_scan - 127 +127
open_mdev_log - 85 +85
mdev_main 255 314 +59
packed_usage 33284 33316 +32
process_action 1051 992 -59
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/1 up/down: 455/-59) Total: 396 bytes
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This purely moves code from main() to separate functions for better
extensibility.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map"
text data bss dec hex filename
952537 485 7296 960318 ea73e busybox_old
952527 485 7296 960308 ea734 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"env - hush SCRIPT" invocation (that is, with empty environment)
should not show PS1/2 in "set" output.
function old new delta
hush_main 1070 1075 +5
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
gcc accepts
__asm__ ( "" : : : "%cc");
but cc is not a real register and clang does not like it.
networking/tls_pstm_montgomery_reduce.c:385:4: error: unknown register name '%cc' in asm
| INNERMUL;
| ^
The % syntax nominally goes before a register, in this case cc,
like "memory" isn't a true register it's just a way of specifying that
the condition code registers for the target are clobbered
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Assignments / exports / unsets of variables are far more frequent than
prompt printing, and if we show prompt, we are likely to be limited by
user typing speed - do not optimize for that scenario.
Just re-query $PS1 / $PS2 values when need to show the prompt.
function old new delta
fgetc_interactive 236 259 +23
set_vars_and_save_old 150 147 -3
pseudo_exec_argv 597 594 -3
hush_main 1110 1105 -5
enter_var_nest_level 38 32 -6
builtin_local 56 50 -6
run_pipe 1857 1834 -23
leave_var_nest_level 127 98 -29
handle_changed_special_names 111 79 -32
cmdedit_update_prompt 57 - -57
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/8 up/down: 23/-164) Total: -141 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
$ dd bs=1G <sda1 of=/dev/sda1
dd: error writing '/dev/sda1': No space left on device
1+0 records in
0+0 records out
999292928 bytes (953.0MB) copied, 0.784617 seconds, 1.2GB/s
function old new delta
write_and_stats 99 102 +3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was
eliminated and calls to it changed to be bb_error_msg(). The downside of
this is that daemons now log all messages to syslog at the LOG_ERR level
which makes it hard to filter errors from informational messages.
This change optionally re-introduces bb_info_msg(), controlled by a new
option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that
were removed (only in applets that set logmode to LOGMODE_SYSLOG or
LOGMODE_BOTH), and also changes informational messages in ifplugd and
ntpd.
The code size change of this is as follows (using 'defconfig' on x86_64
with gcc 7.3.0-27ubuntu1~18.04)
function old new delta
bb_info_msg - 182 +182
bb_vinfo_msg - 27 +27
static.log7 194 198 +4
log8 190 191 +1
log5 190 191 +1
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes
If you don't care about everything being logged at LOG_ERR level
then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller:
function old new delta
static.log7 194 200 +6
log8 190 193 +3
log5 190 193 +3
syslog_level 1 - -1
bb_verror_msg 583 581 -2
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The 'G' command was omitted from the list of commands that change or
delete whole lines. Add it in the appropriate places so the 'dG',
'cG' and 'yG' commands work, including in cases where an explicit
line number has been supplied.
function old new delta
find_range 534 596 +62
.rodata 175166 175167 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 63/0) Total: 63 bytes
Reported-by: David Kelly <david.kelly@liberica.ch>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As reported in bug 11796 BusyBox vi incorrectly handles changes
to a word at the end of a line. If the following line starts
with whitespace changing or deleting the last word of a line
with the 'cw' or 'dw' commands causes the lines to be joined.
This happens because the range for the change returned by
find_range() covers all whitespace after the word, including
newlines. The problem can be fixed by setting 'ml' to zero
to indicate to yank_delete() that processing should stop at
the end of the current line.
However, this results in a new problem. 'dw' correctly deletes
all whitespace following the word but so does 'cw', which should
preserve the trailing whitespace. To fix this the code to omit
whitespace from the change is modified to include all whitespace
not just blanks.
function old new delta
do_cmd 5034 5069 +35
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 35/0) Total: 35 bytes
Reported-by: David Kelly <david.kelly@liberica.ch>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 088fec36fe made -x required for
all. However it isn't for -K.
function old new delta
start_stop_daemon_main 1084 1105 +21
packed_usage 33343 33326 -17
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 21/-17) Total: 4 bytes
Signed-off-by: Alexander Vickberg <wickbergster@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Setting PS1 to:
PS1='$((123+))'
causes the shell to enter an infinite error loop:
sh: arithmetic syntax error
Catch any exception raised by expandarg() in expandstr() and allow
processing to continue.
function old new delta
expandstr 262 344 +82
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 82/0) Total: 82 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Setting PS1 to:
PS1='`xxx(`'
causes the shell to terminate with the error:
sh: syntax error: unexpected end of file (expecting ")")
This happens because old-style backquotes require the input to be reread
and thus call setinputstring() a second time. Prevent the problem by
unwinding all recently opened files in expandstr().
function old new delta
unwindfiles - 22 +22
expandstr 247 262 +15
forkchild 631 625 -6
evalcommand 1694 1685 -9
ash_main 1346 1336 -10
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/3 up/down: 37/-25) Total: 12 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Pass the Authorization header to CGI if not of type Basic. This will
make it possible for CGI to verify authorization headers of type
Bearer <token>.
function old new delta
handle_incoming_and_exit 2370 2379 +9
Signed-off-by: Alexander Vickberg <wickbergster@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Today for gzipped content httpd is using a header with name
Transfer-Length. However I can't find a header with that name in the
standards. Instead use Content-Length.
function old new delta
.rodata 157940 157936 -4
send_headers 980 939 -41
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-45) Total: -45 bytes
Signed-off-by: Alexander Vickberg <wickbergster@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bash 5.0 added the dynamic variable EPOCHSECONDS and EPOCHREALTIME
which return the number of seconds since the Unix Epoch as an
integer or float. These are useful for logging or tracing.
function old new delta
change_epoch - 78 +78
.rodata 175167 175235 +68
varinit_data 264 312 +48
change_seconds - 24 +24
change_realtime - 24 +24
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/0 up/down: 242/0) Total: 242 bytes
text data bss dec hex filename
938508 4203 1888 944599 e69d7 busybox_old
938702 4203 1888 944793 e6a99 busybox_unstripped
v2: Cast tv_sec and tv_usec to unsigned quantities.
Add brackets to macros.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit b28d4c346 (ash: [VAR] Move unsetvar functionality into setvareq)
dropped the code that caused dynamic variables to lose their special
properties when unset. Add it back again.
function old new delta
setvareq 346 360 +14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 14/0) Total: 14 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bash 5.0 added the dynamic variable EPOCHSECONDS and EPOCHREALTIME
which return the number of seconds since the Unix Epoch as an
integer or float. These are useful for logging or tracing.
function old new delta
get_local_var_value 207 302 +95
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 95/0) Total: 95 bytes
text data bss dec hex filename
938702 4203 1888 944793 e6a99 busybox_old
938797 4203 1888 944888 e6af8 busybox_unstripped
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Set up environment variables before running the CGI script.
The variables will be named HTTP_<filtered_name> where the <filtered_name>
is the header name capitalized and all characters not matching
[a-z] | [A-Z] | [0-9] replaced with '_'.
function old new delta
http_response 80 88 +8
http_response_type 20 22 +2
send_headers 718 715 -3
parse_conf 1481 1478 -3
get_line 128 110 -18
cgi_io_loop_and_exit 599 569 -30
send_cgi_and_exit 882 738 -144
handle_incoming_and_exit 2793 2592 -201
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/6 up/down: 10/-399) Total: -389 bytes
text data bss dec hex filename
982178 485 7296 989959 f1b07 busybox_old
981675 485 7296 989456 f1910 busybox_unstripped
Signed-off-by: Alexander Vickberg <wickbergster@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The proxying is documented as follows:
P:/url:[http://]hostname[:port]/new/path
Howeverm urlcopy is not a true copy anymore when it is fdprint'ed
to proxy_fd, this is because percent_decode_in_place() is called
after the copy is created.
This breaks reverse proxying all URIs containing percent
encoded spaces, e.g. - because a decoded URI will be printed out
to proxy_fd instead of the original.
The fix keeps the logic in place to canonicalize the uri first,
before reverse proxying (one could argue that the uri
should be proxied completely unaltered, except for the prefix
rewrite).
function old new delta
handle_incoming_and_exit 2752 2792 +40
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If /etc/resolv.conf is a symlink to a tmpfs and the actual file does not
already exist, "readlink -f" will not detect it as symlink. Explicitely check
for that condition before and touch the file, making the other code work as
intended.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Support for the IEEE timezone string and timezone database strings (100
and 101 options respectively) is added for ipv4, conforming to RFC-4833.
The two options are passed to hook scripts in the variables tzstr and
tzdbstr.
function old new delta
dhcp_option_strings 280 294 +14
dhcp_optflags 76 80 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 18/0) Total: 18 bytes
Signed-off-by: Antoine Girard-Vallée <antoine.girard-vallee@savoirfairelinux.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
ipaddress.c: In function ‘ipaddr_list_or_flush’:
ipaddress.c:427:6: warning: variable ‘no_link’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
I've had a case of a machine where eth0 was appearing a bit later
after the boot, and appearing _downed_. ifplugd then fails to detect
"link up". Thus, depending on how service startup
("ip link set dev eth0 up") races with driver initialization,
ethernet randomly fails to initialize on boot.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In particular useful when you want to evaluate the threads in batch mode:
top -Hbn1
function old new delta
top_main 928 941 +13
packed_usage 33317 33319 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 15/0) Total: 15 bytes
Signed-off-by: Philippe Belet <philippe.belet@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If vi is built with FEATURE_VI_USE_SIGNALS disabled and
FEATURE_VI_WIN_RESIZE enabled new_screen() is used without a
declaration. Move the function to avoid this.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With FEATURE_SYNC_FANCY not set:
function old new delta
fsync_main 130 123 -7
With FEATURE_SYNC_FANCY set, should be much larger code size savings.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
sync: add O_NOCTTY
fsync: drop O_NOATIME, add O_NONBLOCK, set exitcode to 1 if fsync() fails,
update --help message to be similar to sync.
both: reformat code to minimize "diff -u sync.c fsync.c":
in particular, they use same open() flags now
function old new delta
fsync_main 126 130 +4
packed_usage 33316 33317 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 5/0) Total: 5 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add a specific define to indicate which bash compatibility code
implements 'wait -n'.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is the last use of "vsprintf" in busybox:
function old new delta
status_line_bold 72 77 +5
status_line 40 45 +5
vsprintf 23 - -23
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 2/0 up/down: 10/-23) Total: -13 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit db169f2538 breaks the "ip -o link"
command, no output is displayed.. Fix by only excluding the link info if
in oneline mode and if the address family is not AF_PACKET.
function old new delta
ipaddr_list_or_flush 1232 1202 -30
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
On platforms that don't support SIGWINCH vi can be configured
with FEATURE_VI_USE_SIGNALS disabled and FEATURE_VI_WIN_RESIZE
enabled. This allows the user to force an update with ^L when
the screen is resized.
However, because the SIGWINCH handler hasn't run the virtual
screen buffer won't have been updated and the display becomes
corrupted. Fix this by calling new_screen() if necessary.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Building with individual binaries enabled fails when embedded
script applets are included:
/tmp/ccIvMFZg.o: In function `main':
applet.c:(.text.main+0x20): undefined reference to `scripted_main'
Mark scripted_main() as externally visible.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If the MANPATH environment variable isn't set a provisional default
path of /usr/man is placed in man_path_list. This is only used if a
configuration file doesn't contain an alternative path.
If a configuration file lists the default path first:
MANPATH /usr/man:/usr/share/man
add_MANPATH() sees that the default entry is already present and skips
it. As a result man_path_list only contains the second and subsequent
components of the configured MANPATH.
In such cases the path should not be skipped.
function old new delta
add_MANPATH 170 183 +13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 13/0) Total: 13 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
cluster_count is compared against FAT16_MAX, which is defined as 0xfff4
That is the maximum number of cluster a FAT16 can have.
For reference also check the hardware whitepaper from Microsoft
FAT: General Overview of On-Disk Format, version 1.03 page 15
Signed-off-by: Thomas Frauendorfer <tf@miray.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently, running "udhcpc -n -b" causes udhcpc to go to background and
then exit after some time unless a lease is obtained.
It's not very useful to do so
as the calling process doesn't know
if the lease was obtained or not anyway.
The code actually tries to favor "-b" over "-n",
but doesn't clear "-n" flag while clearing "-b" after backgrounding.
So, clear "-n" flag after going into background.
This effectively makes "-b" override "-n" completely
and "-n -b" behave the same as "-b".
This allows to override default "-n" option, passed to udhcpc by ifupdown,
without recompiling busybox.
URL: https://bugs.busybox.net/11691
Signed-off-by: Andrey Mazo <ahippo@yandex.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The following constructs result in ever-increasing memory usage:
while true; do { true; } </dev/null; done
while true; do ( true; ) </dev/null; done
For comparison, bash displays static memory usage in both cases.
This has been fixed in dash by commit 2bc6caa. The maintainer
writes:
I have simplified evaltree so that it simply sets the stack mark
unconditionally. This allows us to remove the stack marks in the
functions called by evaltree.
Closes BusyBox bug 7748.
function old new delta
evaltree 606 632 +26
evalcommand 1724 1696 -28
evalcase 382 351 -31
evalfor 230 196 -34
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 26/-93) Total: -67 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Call i2c_set_slave_addr() unconditionally as busy checking
is skipped depending on force argument.
Clarify usage texts for -f and -a flags.
Signed-off-by: Nikolaus Voss <nv@vosn.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit bb983f30e (vi: fix faulty undo after autoinsert) has a
number of problems:
- The commit message refers to 'autoinsert' when it really means
'autoindent'.
- The indentation of undo_push_insert() was incorrect.
- Most seriously the commit only fixed the problem for cases where
the indentation was exactly one character. This is because undo_push()
only allows single characters to be queued for UNDO_INS_QUEUED.
Lifting this restriction allows the example given in the previous
commit message (with a three character indent) to work.
function old new delta
undo_push 406 435 +29
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 29/0) Total: 29 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
i2ctransfer sends and receives user defined i2c messages
v2: apply Xabier's comments: add -a option, don't decrement argc,
use bb_show_usage() and xzalloc()
v3: fix possible out of bound access to msgs[nmsgs]
Reviewed-by: Xabier Oneca -- xOneca <xoneca@gmail.com>
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently if the 'r' command is followed by a carriage return a
literal CR replaces the current character.
Fix this so that:
- a new line is inserted
- the autoindent setting is respected
- the cursor is placed at the start of the new line
function old new delta
do_cmd 5052 5060 +8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 8/0) Total: 8 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Enable autoinsert and enter the following with an indent of three
spaces:
line 1
line 2
Using 'u' to undo the last insert results in:
line1e 2
The insertion of the indent hasn't been properly recorded.
Since recording insertions is a common operation add a convenience
function, undo_push_insert(), to handle this and use it to record
the autoindent correctly.
function old new delta
undo_push_insert - 36 +36
string_insert 133 129 -4
char_insert 518 473 -45
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/2 up/down: 36/-49) Total: -13 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
fdisk, hexedit and ed calls read_line_edit in libbb/lineedit.c with NULL
as first argument. On line 2373 of lineedit.c of busybox version 1.29.3,
state->hist_file is referenced without checking the state->flag.
This causes segmentation fault on fdisk, hexedit and ed on ARM Cortex-A9.
It somehow works on x86_64.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
A small optimization. There is no need to try matching the current
input line against any further patterns if a match was already
found and -v is specified.
function old new delta
grep_file 1463 1440 -23
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Niko Vähäsarja <niko@tuxera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We found out that busybox -x -v is a bit broken:
ari@ari-thinkpad:~/busybox$ echo ' aa bb cc' | ./busybox grep -x -e 'aa.*' -e '.*bb.*'
aa bb cc
ari@ari-thinkpad:~/busybox$ echo ' aa bb cc' | ./busybox grep -x -v -e 'aa.*' -e '.*bb.*'
ari@ari-thinkpad:~/busybox$ echo ' aa bb cc' | ./busybox grep -x -e '.*aa.*' -e 'bb.*'
aa bb cc
ari@ari-thinkpad:~/busybox$ echo ' aa bb cc' | ./busybox grep -x -v -e '.*aa.*' -e 'bb.*'
aa bb cc
Last one is wrong.
This patch fixes the issue by making sure that the variable 'found'
never makes a transition from 1 to 0, as this would mean that
grep previously found a match on this input line.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Niko Vähäsarja <niko@tuxera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The proto has to be passed in network byte-order.
While at it allow for
ip link add link eth0 name eth0.2.24 type vlan proto 802.1ad id 24
ip link del link eth0 name eth0.2.24 type vlan proto 802.1ad id 24
The del was lacking a dev_str and thus errored out. Fix by using
name/dev counterpart as fallback.
The proto identifier 802.1Q was not recognized, just it's lowercase
variant, fix that too.
function old new delta
do_add_or_delete 1275 1376 +101
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 101/0) Total: 101 bytes
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
If there's any whitespace between w and the filename, parse_file_cmd
writes to the wrong offset when trying to fix up backslashes.
This can be seen in the asan build with busybox sed -e 'w 0\\'
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Unlike exit and return, delete strictly requires an arg, and derefs a
null pointer if executed without one.
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Avoids an uninit pointer deref for some malformed ternary exprs.
Add a test that would crash in busybox before this fix.
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When printing notification on download start and end,
mistakenly, it didn't respect the quiet option
function old new delta
retrieve_file_data 561 579 +18
wget_main 2432 2437 +5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This removes DAEMON_DOUBLE_FORK flag from bb_daemonize_or_rexec(),
as SSD was the only user.
Also includes fix for -S: now works without -a and -x,
does not print pids
(compat with "start-stop-daemon (OpenRC) 0.34.11 (Gentoo Linux)").
function old new delta
start_stop_daemon_main 1018 1084 +66
add_interface 99 103 +4
fail_hunk 139 136 -3
bb_daemonize_or_rexec 205 183 -22
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/2 up/down: 70/-25) Total: 45 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
statement parsing must NOT eat the terminator: caller needs to know
what it was, to correctly decide whether it is a valid one.
function old new delta
zxc_program_read - 234 +234
zdc_program_printStream - 144 +144
zbc_parse_stmt_possibly_auto 1413 1460 +47
zxc_vm_process 869 859 -10
zxc_program_exec 4116 4101 -15
zdc_program_asciify 368 - -368
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 1/2 up/down: 425/-393) Total: 32 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fix for running passwd as root (or sudo passwd $USER).
Crashed on call to free(orig) during cleanup.
Fix regression from commit 17058a06c4
Root user never changes the orig pointer, so when cleaning up, passwd tried to
free orig=(char*)""
Example: sudo passwd $USER
Changing password for xxx
New password:
Bad password: too short
Retype password:
Passwords don't match
free(): invalid pointer
Aborted
function old new delta
passwd_main 958 961 +3
Signed-off-by: Einar Jón <tolvupostur@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The real telnet provides some feedback:
Trying 127.0.0.1...
Connected to localhost.localdomain.
Escape character is '^]'.
We should do this to, because people are sitting there and think
a firewall is dropping packets.
function old new delta
telnet_main 1270 1279 +9
Signed-off-by: Danijel Tasov <m@rbfh.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When using -o to file the progress meter is not displayed, so write that
we started the download and that we finished it.
function old new delta
retrieve_file_data 465 561 +96
wget_main 2412 2432 +20
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 116/0) Total: 116 bytes
text data bss dec hex filename
979022 485 7296 986803 f0eb3 busybox_old
979224 485 7296 987005 f0f7d busybox_unstripped
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"either all or none of the filesystem types passed to -t must be prefixed "
"with 'no' or '!'");
}
Loaded 100 of 576 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.