Let's adopt Herbert Xu's patch, not waiting for it to reach dash git:
hush already has a similar fix.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
(cherry picked from commit 53a7a9cd8c)
Testcase:
21 01 01 00 00 00 00 00 e7 01 01 01 ef 00 df b6
00 17 02 10 11 0f ff 00 16 00 00
Unfortunately, the bug is not reliably causing a segfault,
the behavior depends on what's in memory before the buffer.
function old new delta
unpack_lzma_stream 2762 2768 +6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
(cherry picked from commit 04f052c56d)
On certain corrupt gzip files, huft_build will set the error bit on
the result pointer. If afterwards abort_unzip is called huft_free
might run into a segmentation fault or an invalid pointer to
free(p).
In order to mitigate this, we check in huft_free if the error bit
is set and clear it before the linked list is freed.
Signed-off-by: Samuel Sapalski <samuel.sapalski@nokia.com>
Signed-off-by: Peter Kaestle <peter.kaestle@nokia.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Otherwise if $HISTFILE is unset or reassigned, bad things can happen.
function old new delta
ash_main 1210 1218 +8
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If the Range: header is not present it the request,
the offset passed to sendfile is wrong,
and httpd falls back to the read-write loop.
function old new delta
send_file_and_exit 857 865 +8
handle_incoming_and_exit 2239 2230 -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 8/-9) Total: -1 bytes
Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This lets bb mount build for limited targets without syslog.h,
as long as the parts using it like NFS are disabled.
Signed-off-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It made ^C break out of the entire shell, if we aren't in PS2 mode.
Need a better idea.
function old new delta
expand_one_var 2344 2353 +9
syntax_error_unterm_ch 21 29 +8
parse_dollar 817 824 +7
parse_stream 2251 2238 -13
fgetc_interactive 249 227 -22
syntax_error_unterm_str 26 - -26
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 3/2 up/down: 24/-61) Total: -37 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If we have a square, the speedup can be extremely large
(in best case example below, it's ~40000 times faster):
$ time ./busybox_old factor 18446743988964486098
18446743988964486098: 2 3037000493 3037000493
real 0m4.246s
$ time ./busybox factor 18446743988964486098
18446743988964486098: 2 3037000493 3037000493
real 0m0.000s
function old new delta
isqrt_odd - 57 +57
print_w - 36 +36
factorize 218 236 +18
print_h - 7 +7
factorize_numstr 65 72 +7
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/0 up/down: 125/0) Total: 125 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
13 bytes are not worth the risk of doing something iffy after vfork().
Let's have much clearer code there.
function old new delta
launch_helper 175 188 +13
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When tab-completing a command we search PATH if the partial text
doesn't include a slash. Also match subdirectories of the current
directory, in case the user intends to run a binary from one of
them.
function old new delta
complete_cmd_dir_file 894 917 +23
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Only files should be matched when using PATH for tab-completion.
function old new delta
complete_cmd_dir_file 883 894 +11
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 11/0) Total: 11 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is safe: it's not a setuid applet, the attempt to set time
will simply fail if attempted by non-root
From openwrt 600-allow-ntpd-non-root.patch
function old new delta
ntp_init 1049 1005 -44
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
There are cases where binding to source IP and
destination IP is insufficient to guarantee sane
xmit netdev.
One case where this can fail is when
route-matching netdev carrier is down (cable
unplugged, wifi disconnected), or the netdev is
admin down. Then all the IP based bindings (bind()
+ connect()) will seemingly succeed but the actual
packet can go out through a default gw path.
Depending on the network this happens on
it can create issues or false alarms. It can
also leak some subnet info across networks that
shouldn't be routed.
As such better be safe than sorry and bind to a
netdev to be sure it's used for xmit.
function old new delta
udhcp_send_kernel_packet 293 336 +43
send_packet 182 188 +6
bcast_or_ucast 37 43 +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 55/0) Total: 55 bytes
Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Do not pass "from" and "to" addresses as parameters, keep them in globals
function old new delta
common_traceroute_main 3426 3391 -35
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Do not byteswap ident (why we were doing it?)
function old new delta
common_traceroute_main 3544 3426 -118
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When mounting, in parallel, multiple loop devices (squashfs for the
submitter's case), the following behavior can be observed:
stat64(/path/to/image, {st_mode=S_IFREG|0644, st_size=4096, ...}) = 0
openat(AT_FDCWD, /path/to/image, O_RDWR|O_LARGEFILE) = 3
openat(AT_FDCWD, /dev/loop-control, O_RDWR|O_LARGEFILE|O_CLOEXEC) = 4
ioctl(4, LOOP_CTL_GET_FREE) = 12
close(4) = 0
openat(AT_FDCWD, /dev/loop12, O_RDWR|O_LARGEFILE) = 4
ioctl(4, LOOP_GET_STATUS64, {lo_offset=0, lo_number=12, lo_flags=LO_FLAGS_AUTOCLEAR, lo_file_name=/path/to/image, ...}) = 0
close(4) = 0
close(3) = 0
write(2, "mount: can't setup loop device\n", 31mount: can't setup loop device
) = 31
exit_group(0) = ?
+++ exited with 0 +++
The ioctl LOOP_CTL_GET_FREE has resulted in the same result for
a competing mount process. The subsequent ioctl LOOP_GET_STATUS64
fails, having succeeded for the competing mount process.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The (1 << 8) MS_ flag is MS_NOSYMFOLLOW, not MS_UNION.
As far as I see in git history of kernel and util-linux,
MS_UNION did not ever exist.
Why did it appear in our tree in 2009?...
function old new delta
mount_option_str 379 385 +6
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fails as follows:
$ mount -o bind /dev/disk/by-path/pci-0000:13:00.0-scsi-0:0:3:0 /dir
mount: bad address '/dev/disk/by-path/pci-0000'
function old new delta
singlemount 1256 1273 +17
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If logging to stderr and/or syslog the -v option can be given one or
more times to increase the log verbosity. If mdev is used as hotplug
helper the log level is fixed set to 2 if mdev.log is found an appended
because there is no possiblity to pass arguments to the hotplug helper.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If mdev is run as daemon it should be possible to forward the debug
messages to syslog. This feature might be useful if mdev is run with -s
during boot too. OTOH it makes no sense for the daemon to log to
mdev.log. This can be handled by a syslog daemon way better. If the
daemon stays in the foreground due to -f, the messages are still written
to stderr as before.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If the netlink read() failed with ENOBUFS we know that we have missed at
least one message due to a socket receive buffer overrun. The only way
how to recover is to drop the old socket, open a fresh one and make a
cold-plug scan of the current system state.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The socket receive buffer turned out to be too small for real world
systems. Use the same size as udevd to be on the safe side. As this is
just a limit and the memory is not allocated by the kernel until really
needed there is actually no memory wasted.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As soon as the socket is bound it will receive messages. Make sure the
recieve buffer size is increased before the first message is received.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Avoid using same include file naming pattern as available in GLIBC.
Renamed to match grp_.h et al.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This patch moves the creation of the PID file until after syslogd has
set up signal handlers and is ready.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
/bin/login updates the preliminary UTMP record created by /bin/getty for
$LOGNAME. However, if the PID of login is not the same as getty, then
it will create a new entry. This causes GLIBC getlogin(3) to return the
string 'LOGIN' (set by getty) instead of $LOGNAME. This affects tools
like /usr/bin/logname but also various 3rd party PAM applications.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This significantly syncronises ash-signals and hush-signals tests.
function old new delta
process_wait_result 449 450 +1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Use decode_base64() from uuencode.c when uudecode/base64 applets are included.
That function is bigger than httpd's decodeBase64(), so we use the old one when
those applets are disabled. Bloat-o-meter when one of those is enabled:
function old new delta
handle_incoming_and_exit 2371 2265 -106
Signed-off-by: Xabier Oneca <xoneca@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"error: taking address of packed member of 'struct ip_udp_dhcp_packet'
may result in an unaligned pointer value" here:
udhcp_dump_packet(&packet.data);
and in other places.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Starting with linux kernel v5.4 squashfs has a more strict parameter
checking implemented. Unlike util-linux mount, busybox never supported
the sizelimit option but simply forwards it to the kernel.
Since v5.4 mounting will fail with
squashfs: Unknown parameter 'sizelimit'
Support the sizelimit parameter by setting it in the LOOP_SET_STATUS64
structure before handing it to the kernel.
While at it also add support for the offset option, which currently will
always be set to 0.
function old new delta
cut_out_ull_opt - 167 +167
singlemount 1230 1266 +36
set_loop 834 862 +28
losetup_main 479 483 +4
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/0 up/down: 235/0) Total: 235 bytes
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue, 2 Jun 2020 23:46:48 +1000
jobs: Fix waitcmd busy loop
We need to clear gotsigchld in waitproc because it is used as
a loop conditional for the waitcmd case. Without it waitcmd
may busy loop after a SIGCHLD.
This patch also changes gotsigchld into a volatile sig_atomic_t
to prevent compilers from optimising its accesses away.
Fixes: 6c691b3e5099 ("jobs: Only clear gotsigchld when waiting...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This change also incorporates other changes to bring us closer to upstream.
function old new delta
dowait 553 636 +83
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 10 Apr 2020 21:03:09 +1000
jobs: Fix infinite loop in waitproc
After we changed the resetting of gotsigchld so that it is only
done if jp is NULL, we can now get an infinite loop in waitproc
if gotsigchld is set but there is no outstanding child because
everything had been waited for previously without gotsigchld being
zeroed.
This patch fixes it by always zeroing gotsigchld as we did before.
The bug that the previous patch was trying to fix is now resolved
by switching the blocking mode to DOWAIT_NORMAL after the specified
job has been completed so that we really do wait for all outstanding
dead children.
Reported-by: Harald van Dijk <harald@gigawatt.nl>
Fixes: 6c691b3e5099 ("jobs: Only clear gotsigchld when waiting...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
dowait 553 631 +78
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream tried it, and then reverted by:
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue, 26 May 2020 23:19:05 +1000
parser: Fix double-backslash nl in old-style command sub
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If server responds with ETag then next time client can resend it via If-None-Match header.
Then httpd will check if file wasn't modified and if not return 304 Not Modified status code.
The ETag value is constructed from file's last modification date in unix epoch and it's size:
"hex(last_mod)-hex(file_size)" e.g. "5e132e20-417" (with quotes).
That means that it's not completely reliable as hash functions but fair enough.
The same form of ETag is used by Nginx so load balancing of static content is safe.
function old new delta
handle_incoming_and_exit 2135 2201 +66
http_response 88 96 +8
send_headers 676 683 +7
parse_conf 1362 1365 +3
http_response_type 22 24 +2
send_file_and_exit 847 841 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/1 up/down: 86/-6) Total: 80 bytes
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The Last-Modified header is used for caching.
The client (browser) will send back the received date to server via If-Modified-Since request header.
But both headers MUST be an RFC 1123 formatted string.
And the formatting consumes resources on request parsing and response generation.
Instead we can use ETag header.
This simplifies logic and the only downside is that in JavaScript the document.lastModified will return null.
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
RFC 2616 sec. 14.18 says that server MUST send Date header.
But in fact the header make sense only for Cache-Control and can be omitted.
In the same time the Date eats power, CPU and network resources which are critical for embedded systems.
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
HTTP v1.1 was released in 1999 year and it's time to update BB HTTPD.
Browsers may behave badly with HTTP/1.0
E.g. Chrome does not send the If-None-Match header with ETag.
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The glibc implementation changed for settimeofday, resulting in "invalid
argument" error when attempting to set both timezone and time with a single
call. Fix this by calling settimeofday twice
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is a recent change in GNU grep as well (after 3.1)
function old new delta
grep_file 1215 1228 +13
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
PLATFORM_LINUX is a hidden configuration option which is disabled by
default and enabled at over a hundred locations for features that are
deemed to be Linux specific.
The only effect of PLATFORM_LINUX is to control compilation of
libbb/match_fstype.c. This file is only needed by mount and umount.
Remove all references to PLATFORM_LINUX and compile match_fstype.c
if mount or umount is enabled.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Duplicate options are currently overridden (only the last option is kept).
This leads to unexpected behavior when using long options.
The patch adds support for long options in compliance with RFC 3396.
Fixes#13136.
function old new delta
udhcp_run_script 601 725 +124
optitem_unset_env_and_free - 38 +38
putenvp 46 59 +13
static.xmalloc_optname_optval 718 717 -1
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/1 up/down: 175/-1) Total: 174 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The "noprefixroute" option suppresses automatic generation of a routing
table entry based on the interface's ip address.
The ifa_flags field has only 8 bit. If higher bits are set,
rta_tb[IFA_FLAGS] has to be used instead.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With bash's read builtin it is possible to read from a file (e.g.
device-tree) until the first '\0' character:
IFS= read -r -d '' VARIABLE < file
In busybox ash the -d extension is also implemented, but checking the
read character for '\0' has to be performed after comparing with the
delimiter.
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Remove new lines \n and some semicolons ;. This minimize page style size from 655 to 604
Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
dname_dec: now iterates over the packet only once.
convert_dname: remove redundant checks and code shrink.
While testing I've noticed that some of the tests didn't compile
properly, so I fixed them.
function old new delta
dname_dec 286 267 -19
dname_enc 166 143 -23
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-42) Total: -42 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some editors (like vim) use renaming strategy to save file. That means
they save a file to some random name and then rename it to final
location. The advantage is that such save is atomic.
However, crontab -e holds open fd to the temporary file, meaning it
never sees the changes. The temporary file needs to be re-opened after
the editor terminates for the changes to properly save.
Fixes#12491
Signed-off-by: Gray Wolf <wolf@wolfsden.cz>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Code shrink and prevention of possible out of bounds access.
function old new delta
nth_string 36 26 -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-10) Total: -10 bytes
text data bss dec hex filename
981342 16915 1872 1000129 f42c1 busybox_old
981332 16915 1872 1000119 f42b7 busybox_unstripped
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
fill_envp now iterates over the packet only once instead of a few hundred times
using the new option scanner.
function old new delta
udhcp_scan_options - 189 +189
putenvp - 46 +46
init_scan_state - 22 +22
udhcp_get_option 227 104 -123
udhcp_run_script 835 601 -234
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 0/2 up/down: 257/-357) Total: -100 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
busybox will remove directory symlinks, which is at
odds with common layouts that have some of
bin/lib/lib32/lib64 symlinked.
this adds a exludelist for critcal and often symlinked
directories.
Fixes: Bug 12551
function old new delta
remove_file_array 139 231 +92
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
On Alpine, some users use /dev/null as a home directory. When removing
such a user with `deluser --remove-home` this causes the /dev/null
device file to be removed which is undesirable. To prevent this pitfall,
check if the home directory specified for the user is an actual
directory (or a symlink to a directory).
Implementations of similar tools for other operating systems also
implement such checks. For instance, the OpenBSD rmuser(1)
implementation [0].
[0]: https://github.com/openbsd/src/blob/b69faa6c70c5bfcfdddc6138cd8e0ee18cc15b03/usr.sbin/adduser/rmuser.perl#L143-L151
function old new delta
deluser_main 337 380 +43
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit d1b75e184 (httpd: permit non-default home directory with NOMMU
enabled) only works when used with the '-f' (foreground) option.
When '-f' isn't specified and NOMMU is enabled bb_daemonize_or_rexec()
is called to daemonize the server. Since the server process has been
re-execed the previous patch results in the xchdir() not being called.
Fix this by resetting the re_execed variable in this case.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Prior to the patch, both -f and --first-only are in all cases either
no-op or ignored.
Without --tabs, --first-only is the default so specifying it is a no-op.
With --tabs, --all is implied, and --first-only is intended to reset this.
function old new delta
expand_main 690 694 +4
Signed-off-by: Mark Edgar <medgar123@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Incorporated valid_domain_label into good_hostname to simplify the implementation.
function old new delta
static.xmalloc_optname_optval 973 958 -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-15) Total: -15 bytes
text data bss dec hex filename
993144 16915 1872 1011931 f70db busybox_old
993129 16915 1872 1011916 f70cc busybox_unstripped
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When ENABLE_FEATURE_WGET_OPENSSL is enabled, correctly implement TLS
verification by default. And only ignore verification errors, if
--no-check-certificate was passed.
Also note, that previously OPENSSL implementation did not implement
TLS verification, nor printed any warning messages that verification
was not performed.
Bug-Ubuntu: https://bugs.launchpad.net/bugs/1879533
CVE-2018-1000500
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
show_history() checks that its argument in non-null so there's
no need to repeat the test at call sites.
function old new delta
historycmd 25 17 -8
builtin_history 29 21 -8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-16) Total: -16 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
mim runs scripts from a specification file which can be thought
of as an extremely limited Makefile. Neither make variables nor
dependencies are supported. By default the file 'Mimfile' is read.
An example:
hello:
echo hello $1
clean:
rm -rf *
The command 'mim' or 'mim hello' will echo 'hello'. Unlike 'make'
arguments after the first are available to the script; they don't
specify additional targets.
mim isn't enabled by default. Enabling it increases the size of the
binary by about 500 bytes.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since commit 7eb8eecbb (ash: eval: Add assignment built-in support
again) building BusyBox with the 'command' built-in disabled fails.
parse_command_args() only needs to be called when the 'command'
built-in is run. Which it won't be if it's disabled.
v2: Avoiding infinite loops is good, too. Thanks, Harald van Dijk.
Reported-by: Deweloper <deweloper@wp.pl>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When BusyBox is compiled with NOMMU enabled running httpd with
the '-h' option fails even if the specified directory exists:
$ ls -d www
www
$ busybox httpd -fvvvp 8080 -h www
...
... try to access http://localhost:8080/www
...
httpd: can't change directory to 'www': No such file or directory
The parent process executes xchdir("www"). When a connection is accepted
it's handled by re-executing httpd in inetd mode. The child process
inherits the current directory "www" and tries to change directory again
to "www", which fails.
Omit the call to xchdir() when httpd is re-executed.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
From POSIX.1-2008:
The pattern_list's value shall consist of one or more patterns
separated by <newline> characters;
As such, given patterns need to be split at newline characters. Without
doing so, busybox grep will interpret the newline as part of the pattern
which is not in accordance with POSIX.
See also: https://bugs.busybox.net/show_bug.cgi?id=12721
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Grep currently special-cased empty pattern file to be the same as
pattern file with one empty line (empty pattern). That does mirror how
GNU grep behaves, except when -x is provided. In that case .* pattern
needs to be used instead.
Signed-off-by: Gray Wolf <wolf@wolfsden.cz>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since commit 1ff7002b1 (xargs: fix handling of quoted arguments, closes
11441) the -n option hasn't worked properly:
$ echo 1 2 3 | xargs -n 1 echo
1
2
3
$
Because state is now remembered between calls to process_stdin() it's
necessary to update the state before any premature return.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When using GNU Make >=4.3, the KBUILD_STR() definition interferes badly
with dependency checks during build, and forces a complete rebuild every
time Make runs.
In if_changed_rule, Kconfig checks if the command used to build a file
has changed since last execution. The previous command is stored in the
generated .<file>.o.cmd file. For example applets/.applets.o.cmd defines
a "cmd_applets/applets.o" variable:
cmd_applets/applets.o := gcc ... -D"KBUILD_STR(s)=#s" ...
Here the '#' should be escaped with a backslash, otherwise GNU Make
interprets it as starting a comment, and ignore the rest of the
variable. As a result of this truncation, the previous command doesn't
equal the new command and Make rebuilds each target.
The problem started to appear when GNU Make 4.3 (released January 2020),
introduced a backward-incompatible fix to macros containing a '#'. While
the above use of '#', a simple Make variable, still needs to be escaped,
a '#' within a function invocation doesn't need to be escaped anymore.
As Martin Dorey explained on the GNU Make discussion [1], the above
declaration is generated from make-cmd, defined as:
make-cmd = $(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1))))
Since GNU Make 4.3, the first argument of subst should not have a
backslash. make-cmd now looks for literally \# and doesn't find it, and
as a result doesn't add the backslash when generating .o.cmd files.
[1] http://savannah.gnu.org/bugs/?20513
We could fix it by changing make-cmd to "$(subst #,\#,...)", but to
avoid compatibility headaches, simply get rid of the KBUILD_STR
definition, as done in Linux by b42841b7bb62 ("kbuild: Get rid of
KBUILD_STR"). Quote the string arguments directly rather than asking the
preprocessor to quote them.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The official Info-Zip unzip creates the dir if it doesn't exist.
Signed-off-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Wed, 12 Sep 2018 14:27:16 +0800
expand: Fix multiple issues with EXP_DISCARD in evalvar
The commit 3cd538634f71538370f5af239f342aec48b7470b broke parameter
expansion in multiple ways because the EXP_DISCARD flag wasn't set
or tested for various cases:
$ src/dash -c 'var=; echo ${var:+nonempty}'
nonempty
$ src/dash -u -c 'unset foo bar; echo ${foo+${bar}}'
dash: 1: bar: parameter not set
$ src/dash -c 'foo=bar; echo ${foo=BUG}; echo $foo'
barBUG
bar
$
This patch fixes them by introducing a new discard variable that
tracks whether the extra word should be discarded or not when it
is parsed.
Reported-by: Martijn Dekker <martijn@inlv.org>
Fixes: 3cd538634f71 ("expand: Do not reprocess data when...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream patch:
Date: Wed, 30 May 2018 02:06:03 +0800
expand: Do not reprocess data when expanding words
Currently various paths will reprocess data when performing word
expansion. For example, expari will skip backwards looking for
the start of the arithmetic expansion, while evalvar will skip
unexpanded words manually.
This is cumbersome and error-prone. This patch fixes this by
making word expansions proceed in a linear fashion. This means
changing argstr and the various expansion functions such as expari
and subevalvar to return the next character to be expanded.
This is inspired by similar code from FreeBSD. However, we take
things one step further and completely remove the manual word
skipping in evalvar. This is accomplished by introducing a new
EXP_DISCARD flag that tells argstr to only parse and not produce
any actual expansions.
Incidentally, argstr will now always NUL-terminate the expansion
unless the EXP_WORD flag is set. This is because all but one
caller of argstr wants the result to be NUL-termianted.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Also includes two one-line follow-up fixes:
expand: Eat closing brace for length parameter
if (subtype == VSLENGTH) {
+ p++;
if (flag & EXP_DISCARD)
expand: Fix double-decrement in argstr
- newloc = expdest - (char *)stackblock() - end;
+ newloc = q - (char *)stackblock() - end;
and changes in code for bash substring extensions.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Following recent work on evalcommand() a TRACE statement to report
the status of a forked command was left in the wrong place.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sun, 11 Nov 2007 15:27:00 +0800
Expand here-documents in the current shell environment
Previously we always expanded here-documents in a subshell. This is
contrary to the POSIX specification and how other shells behave. What's
more this slows down many expansions due to the extra fork (however, it
must be said that it is possible for it speed up certain expansions by
running it simultaneously with the command on two CPUs).
This patch move the expansion into the current shell environment.
Test case:
unset a
cat <<- EOF > /dev/null
${a=NOT}
EOF
echo ${a}BAD
Old result:
BAD
New result:
NOTBAD
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 19 Nov 2018 18:43:58 +0800
parser: Do not push token back before parseheredoc
When we read the first token in list() we use peektoken instead
of readtoken as the following code needs to use the same token
again. However, this is wrong when we're in a here-document as
it will clobber the saved token without resetting the tokpushback
flag.
This patch fixes it by doing the tokpushback after parseheredoc
and setting lasttoken again if parseheredoc was called.
Reported-by: Ron Yorston <rmy@frippery.org>
Fixes: 7c245aa8ed33 ("[PARSER] Simplify EOF/newline handling in...")
Fixes: ee5cbe9fd6bc ("[SHELL] Optimize dash -c "command" to avoid a fork")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 29 Mar 2019 13:49:59 +0800
parser: Fix old-style command substitution here-document crash
... This is caused by the recent change to
save/restore here-docment list around command substitutions. In
doing so we must finish existing here-documents prior to restoring
the old here-document list. This is done for new-style command
substitutions but not for old-style.
This patch fixes it by doing it for both.
Fixes: 51e2d88d6e51 ("parser: Save/restore here-documents in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 1 Jun 2018 18:25:29 +0800
expand: Ensure result is escaped in cvtnum
The minus sign generated from arithmetic expansion is currently
unquoted which causes anomalies when the result is used in where
the quoting matters.
This patch fixes it by explicitly calling memtodest on the result
in cvtnum.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 31 May 2018 01:51:48 +0800
memalloc: Avoid looping in growstackto
Currently growstackto will repeatedly call growstackblock until
the requisite size is obtained. This is wasteful. This patch
changes growstackblock to take a minimum size instead.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 14 Dec 2018 13:52:02 +0800
eval: Only restore exit status on exit/return
We unconditionally restore the saved status in exitreset, which
is incorrect as we only want to do it for exitcmd and returncmd.
This patch fixes the problem by introducing EXEND.
Reported-by: Martijn Dekker <martijn@inlv.org>
Fixes: da30b4b78769 ("[BUILTIN] Exit without arguments in a trap...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixes exitcode_trap4.tests.
Upstream commit:
Date: Mon, 6 Oct 2014 21:51:26 +0800
Return without arguments in a trap should use status outside traps
POSIX now requires that return without arguments in a trap should
return the last command status prior to executing traps. This
patch implements this behaviour.
Incidentally this also changes the behaviour of return without
arguments in a loop conditional to use the last exit status in
the body as opposed to the last command in the conditional when
there is one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since commit d81af7216 (ash: eval: Reap zombies after built-in commands
and functions) if the shell is compiled with SH_STANDALONE and SH_NOFORK
enabled nofork applets potentially return the incorrect status.
The status value returned by evalcommand() in this case is obtained from
exitstatus in a call to waitforjob(NULL). This overwrites the status
set for nonfork applets.
If this commit seems familiar it's essentially a reversion of commit
5ccb0e92fa (ash: return exit status of nofork applets). What was correct
in 2016 is wrong in 2020 and vice versa.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 28 May 2018 00:17:39 +0800
expand: Merge syntax/quotes in memtodest with flags
The function arguments syntax and quotes are both derived from
the expansion flags. As syntax is only used by memtodest we do
not need to maintain it outside of the function at all.
The only place that uses something other than BASESYNTAX or DQSYNTAX
is exptilde. However in that case DQSYNTAX has exactly the same
effect as SQSYNTAX.
This patch merges these two arguments into a single flags. The
macro QUOTES_KEEPNUL has been renamed to EXP_KEEPNUL in order
to keep the namespace separate.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 31 May 2018 01:15:34 +0800
eval: Always set localvar_stop
The variable localvar_stop is set iff vlocal is true. gcc doesn't
get this so we get a spurious warning.
This patch fixes this by always calling pushlocalvars with vlocal
and making it only actually do the push if vlocal is non-zero.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:55 +0800
eval: Replace with listsetvar with mklocal/setvareq
This patch replaces listsetvar with mklocal/setvareq. As we now
determine special built-in status prior to variable assignment, we
no longer have to do a second pass listsetvar. Instead we will
call setvareq directly instead of mklocal when necessary.
In order to do this mklocal can now take a flag in order to mark
a variable for export.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:54 +0800
eval: Fail immediately with redirections errors for simple command
Previously, dash would continue to perform variable expansions
even if a redirection error occured. This patch changes it so
that it fails immediately.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:52 +0800
eval: Add assignment built-in support again
This patch adds assignment built-in support that used to exist
in dash prior to 0.3.8-15. This is because it will soon be part
of POSIX, and the semantics are now much better defined.
Recognition is done at execution time, so even "command -- export"
or "var=export; command $var" should work.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:41 +0800
jobs: Only clear gotsigchld when waiting for everything
The gotsigchld flag is always cleared in dowait but not all callers
of dowait will wait for everything. In particular, when jp is set
we only wait until the set job isn't running anymore.
This patch fixes this by only clearing gotsigchld if jp is unset.
It also changes the waitcmd to actually set jp which corresponds
to the behaviour of bash/ksh93/mksh.
The only other caller of dowait that doesn't wait for everything
is the jobless reaper. This is in fact redundant now that we wait
after every simple command. This patch removes it.
Finally as every caller of dowait needs to wait until either the
given job is not running, or until all terminated jobs have been
processed, this patch moves the loop into dowait itself.
Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Mon, 7 May 2018 00:40:34 +0800
jobs - Do not block when waiting on SIGCHLD
Because of the nature of SIGCHLD, the process may have already been
waited on and therefore we must be prepared for the case that wait
may block. So ensure that it doesn't by using WNOHANG.
Furthermore, multiple jobs may have exited when gotsigchld is set.
Therefore we need to wait until there are no zombies left.
Lastly, waitforjob needs to be called with interrupts off and
the original patch broke that.
Fixes: 03876c0743a5 ("eval: Reap zombies after built-in...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
While at it, removed INT_ON/OFF in waitforjob() - it must be called
from INT_OFF region anyway.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 26 Mar 2018 23:55:50 +0800
eval: Reap zombies after built-in commands and functions
Currently dash does not reap dead children after built-in commands
or functions. This means that if you construct a loop consisting
of solely built-in commands and functions, then zombies can hang
around indefinitely.
This patch fixes this by reaping when necessary after each built-in
command and function.
Reported-by: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:51 +0800
exec: Never rehash regular built-ins
As regular (including special) built-ins can never be overridden,
we should never remove them from the hash table.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Sat, 19 May 2018 02:39:50 +0800
exec: Stricter pathopt parsing
This patch changes the parsing of pathopt. First of all only
%builtin and %func (with arbitrary suffixes) will be recognised.
Any other pathopt will be treated as a normal directory.
Furthermore, pathopt can now be specified before the directory,
rather than after it. In fact, a future version may remove support
for pathopt suffixes.
Wherever the pathopt is placed, an optional % may be placed after
it to terminate the pathopt.
This is so that it is less likely that a genuine directory containing
a % sign is parsed as a pathopt.
Users of padvance outside of exec.c have also been modified:
1) cd(1) will always treat % characters as part of the path.
2) chkmail will continue to accept arbitrary pathopt.
3) find_dot_file will ignore the %builtin pathopt instead of trying
to do a stat in the accompanying directory (which is usually the
current directory).
The patch also removes the clearcmdentry optimisation where we
attempt to only partially flush the table where possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:48 +0800
exec: Do not allocate stack string in padvance
Many callers of padvance immediately free the allocated string
so this patch moves the stalloc call to the caller. Instead of
returning the allocated string, padvance now returns the length
to allocate (this may be longer than the actual string length,
even including the NUL). For the case where we would previously
return NULL, we now return -1.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:46 +0800
memalloc: Add growstackto helper
This patch adds the growstackto helper which repeatedly calls
growstackblock until the requested size is reached.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Sat, 19 May 2018 02:39:42 +0800
parser: Save/restore here-documents in command substitution
This patch changes the parsing of here-documents within command
substitution, both old style and new style. In particular, the
original here-document list is saved upon the beginning of parsing
command substitution and restored when exiting.
This means that here-documents outside of command substitution
can no longer be filled by text within it and vice-versa.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:40 +0800
mkinit: Split reset into exitreset and reset
Previously reset was called after exitshell. This was changed
so that it was called before exitshell because certain state needed
to be reset in order for the EXIT trap to work.
However, this caused issues because certain other states (such
as local variables) should not be reset. This patch fixes this
by creating a new function exitreset that is called prior to
exitshell and moving reset back to its original location.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 29 Apr 2019 19:13:37 +0500
expand: Fix trailing newlines processing in backquote expanding
According to POSIX.1-2008 we should remove newlines only at the end of
the substitution. Newlines-only substitions causes dash to remove
newlines before beggining of the substitution. The following code:
cat <<END
1
$(echo "")
2
END
prints "1<newline>2" instead of expected "1<newline><newline>2".
This patch fixes trailing newlines processing in backquote expanding.
Signed-off-by: Nikolai Merinov <n.merinov@inango-systems.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 27 May 2019 13:39:37 +0800
parser: Only accept single-digit parameter expansion outside of braces
This patch should fix the problem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 15 Dec 2018 18:49:31 +0100
shell: Fix clang warnings about "string plus integer"
Building with clang results in some warnings about integer values being
added to strings.
While the code itself is fine and the warnings are indeed harmless,
fixing them also makes the semantic more explicit: what it is actually
being increased is the address which points to the start of the string
in order to skip the initial character when some conditions are met.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Mon, 19 Nov 2018 18:00:32 +0800
eval: Use the correct expansion mode for fd redirection
It has been reported that
echo test >&$EMPTY_VARIABLE
causes dash to segfault. This is a symptom of the bigger problem
that dash tries to perform pathname expansion as well as field
splitting on the word after >& and <&. This is wrong and this
patch fixes it to use the same expansions as done on a normal
redirection.
Reported-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon, 28 May 2018 17:09:48 +0800
expand: Fix skipping of command substitution when trimming in evalvar
When we are trimming an unset variable in evalvar, any embedded
command substitution that should have been skipped are not. This
can cause them to be evaluated later should there be other command
substitutions in the same input word.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream comment:
Date: Fri, 7 Sep 2018 10:34:14 +0200
main: Print \n upon EOF (CTRL-D) when run interactively
Exiting dash via a ^D instead of with "exit" causes dash to forget to
print a newline.
sh-3.1$ sh
sh-3.1$ ^D
sh-3.1$ dash
$ sh-3.1$
It is more neat and tidy to send a newline similarly to what bash does,
so it doesn't make the next prompt of the parent shell look ugly.
Suggested by jidanni.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
[reworded the patch description]
Signed-off-by: Andrej Shadura <andrew.shadura@collabora.co.uk>
Bug-Debian: http://bugs.debian.org/476422
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sun, 27 May 2018 17:31:57 +0800
expand: Use HOME in tilde expansion when it is empty
Currently if HOME is set to empty tilde expansion will fail, i.e.,
it will remain as a literal tilde. This patch changes it to
return the empty string as required by POSIX.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:49 +0800
builtin: Mark more regular built-ins
This patch marks the following built-ins as regular, meaning that
they cannot be overriden using PATH search:
hash
pwd
type
ulimit
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:45 +0800
jobs: Replace some uses of fmtstr with stpcpy/stpncpy
Some uses of fmtstr, particularly the ones without a format string,
can be replaced with stpcpy or stpncpy. This patch does that so
we don't have to introduce unnecessary format strings in order to
silence compiler warnings.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:44 +0800
output: Fix fmtstr return value
The function fmtstr is meant to return the actual length of output
produced, rather than the untruncated length.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:38 +0800
main: Only set savestatus in exitcmd
Currently exitcmd sets exitstatus and then savestatus if the latter
was previously set. In fact, as exitcmd always raises an exception
and will either end up in the setjmp call in main() or exitshell(),
where exitstatus is always replaced by savestatus if set, we only
need to set savestatus.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Mon Oct 6 10:39:47 2014 +0800
[BUILTIN] Exit without arguments in a trap should use status outside traps
POSIX now requires that exit without arguments in a trap should
return the last command status prior to executing traps. This
patch implements this behaviour.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Keeping up with upstream (in our case, 'before patch' code is not buggy).
Upstream commit:
Date: Fri, 11 May 2018 23:41:25 +0800
parser: Fix incorrect eating of backslash newlines
With the introduction of synstack->syntax, a number of references
to the syntax variable was missed during the conversion. This
causes backslash newlines to be incorrectly removed in single
quote context.
This patch also combines these calls into a new helper function
pgetc_top.
Fixes: ab1cecb40478 ("parser: Add syntax stack for recursive...")
Reported-by: Leah Neukirchen <leah@vuxu.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Adding previously skipped "readtoken1(pgetc_eatbnl(), DQSYNTAX..." changes
from upstream commit:
Date: Thu Mar 8 08:37:11 2018 +0100
Author: Harald van Dijk <harald@gigawatt.nl>
parser: use pgetc_eatbnl() in more places
dash has a pgetc_eatbnl function in parser.c which skips any
backslash-newline combinations. It's not used everywhere it could be.
There is also some duplicated backslash-newline handling elsewhere in
parser.c. Replace most of the calls to pgetc() with calls to
pgetc_eatbnl() and remove the duplicated backslash-newline handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As reported in bug 11441 when presented with a large number of quoted
arguments xargs can return 'argument line too long':
seq 10000 29999 | sed -e 's/^/"/' -e 's/$/"/' | busybox xargs echo
This happens because the variant of process_stdin() which handles quoted
arguments doesn't preserve state between calls. If the allowed number
of characters is exceeded part way through a quoted argument the next
call to process_stdin() incorrectly treats the terminating quote as a
starting quote, thus quoting all of the argument separators.
function old new delta
process_stdin 274 303 +29
xargs_main 731 745 +14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 43/0) Total: 43 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Handling of string searches in colon commands (e.g ':/pat1/,/pat2/cmd')
differ from standard vi:
- As reported in bug 10321 such searches can't be repeated using the
'n' command. This is because the last search pattern isn't updated.
- The search also can't be repeated using the command '://' because
an empty search pattern doesn't imply the use of the last search
pattern.
- Such searches should start on the line after the current line,
otherwise '://' never moves to the next occurrence of the pattern.
This can also affect other cases where line ranges are specified
using search patterns.
Fix these various issues.
function old new delta
get_one_address 325 342 +17
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The dash maintainer recently posted a fix for issues with expanding
PS1. These had already been fixed differently in BusyBox ash. Borrow
a couple of improvements:
- Use a single call to setjmp() to trap errors in both readtoken1()
and expandarg().
- In case of error set the prompt to the literal value of PS1 rather
than the half-digested nonsense in stackblock() which might include
ugly control characters.
function old new delta
expandstr 353 300 -53
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
For some use cases, having logs with more than 1 second accuracy can be
helpful. Add an option to include milliseconds when adding a timestamp in
HH:MM:SS.mmm format, similar to syslog-ng with fraq_digits(3) or journalctl
-o short-precise.
For simplicity, abuse the remaining space in the buffer used by ctime to add
the millieconds (overwriting year).
function old new delta
timestamp_and_log 401 448 +47
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Before this change, a request to reboot could be "overwritten" by e.g.
SIGHUP.
function old new delta
init_main 709 793 +84
packed_usage 33273 33337 +64
run_actions 109 117 +8
stop_handler 87 88 +1
check_delayed_sigs 340 335 -5
run 214 198 -16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/2 up/down: 157/-21) Total: 136 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This adds -R option to grep similar to GNU grep. It is the same as -r
but also dereferences symbolic links to directories.
function old new delta
grep_main 834 850 +16
packed_usage 33362 33368 +6
grep_file 1440 1441 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Tomi Leppanen <tomi.leppanen@jolla.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
stime() has been deprecated in glibc 2.31 and replaced with
clock_settime(). Let's replace the stime() function calls with
clock_settime() in preperation.
function old new delta
rdate_main 197 224 +27
clock_settime - 27 +27
date_main 926 941 +15
stime 37 - -37
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 2/0 up/down: 69/-37) Total: 32 bytes
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When IF_DESKTOP is not defined, chown and chgrp only takes option -R -h,
However the usage output of chgrp is wrong:
$ ./busybox.nosuid chown
Usage: chown [-Rh]... USER[:[GRP]] FILE...
$ ./busybox.nosuid chgrp
Usage: chgrp [-RhLHP]... GROUP FILE...
$ ./busybox.nosuid chgrp -H group dummy
chgrp: invalid option -- 'H'
Usage: chgrp [-RhLHP]... GROUP FILE...
The chgrp is now a wrapper of chown, so the recognized options shall be the same.
This is introduced by 34425389e0
I would expect the correct behavior shall be the same as chown.
So suggest the below patch, the behavior shall be:
$ ./busybox.nosuid chgrp
Usage: chgrp [-Rh]... GROUP FILE...
Signed-off-by: Shuang Liu <sliu@de.adit-jv.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
> 2018-07-25:
> ntpd: increase MIN_FREQHOLD by 3
> This means we'll start correcting frequency ~5 minutes after start,
> not ~3.5 ones.
> With previous settings I still often see largish ~0.7s initial offsets
> only about 1/2 corrected before frequency correction kicks in,
> resulting in ~200ppm "correction" which is then slowly undone.
Review of real-world results of the above shows that with small
initial offsets, freq correction can be allowed to kick in sooner,
whereas with large (~0.8s) offsets, we still start freq correction
a bit too soon.
Let's rebalance this a bit.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add support for querying and parsing SRV DNS records.
function old new delta
send_queries 1711 1865 +154
qtypes 72 80 +8
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Under some circumstances, a DNS reply might contain no resource records,
e.g. when a valid domain is queried that does not have records of the
requested type.
Example with nslookup from BIND dnsutils:
$ nslookup -q=SRV example.org
Server: 10.11.12.13
Address: 10.11.12.13#53
Non-authoritative answer:
*** Can't find example.org: No answer
Currently the busybox nslookup applet simply prints nothing after the
"Non-authoritative answer:" line in the same situation.
This change modifies nslookup to either print "Parse error" or "No answer"
diagnostics, depending on the parse_reply() return value.
function old new delta
send_queries 1676 1711 +35
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
huft_build() has way too many params
function old new delta
inflate_block 1293 1281 -12
huft_build 1085 1058 -27
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-39) Total: -39 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
> I'm trying to connect to a Korenix 3005 switch through telnet
> for management purposes, and all is well except for the backspace character
> - seems like my switch doesn't handle it too well and instead of erasing
> the last character all it does is print some garbage to the screen.
> I've had the same issue before while using putty, but saw a solution that
> suggests to enable "Telnet special commands" in the options menu, and it
> worked.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When crond is built with FEATURE_CROND_SPECIAL_TIMES enabled, it creates
a file called 'crond.reboot' at CONFIG_PID_FILE_PATH, but if
FEATURE_PIDFILE is disabled, this will be an empty string and the file
will be created in the root directory, which is undesirable.
This commit makes PID_FILE_PATH depend on FEATURE_CROND_SPECIAL_TIMES as
well as FEATURE_PIDFILE so that you get sensible behaviour in crond when
FEATURE_PIDFILE is switched off.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If sub is empty, avoids an infinite loop.
function old new delta
count_strstr 45 63 +18
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Changed safe_read to be symmetrical to safe_write, it shall
never return EINTR because it calls read multiple times,
the error is considered transient.
function old new delta
safe_read 44 57 +13
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some 32-bit architectures no longer have the 32-bit time_t syscalls.
Instead they have suffixed syscalls that returns a 64-bit time_t. If
the architecture doesn't have the non-suffixed syscall and is using a
64-bit time_t let's use the suffixed syscall instead.
This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel
headers.
If an architecture only supports the suffixed syscalls, but is still
using a 32-bit time_t report a compilation error. This avoids us have to
deal with converting between 64-bit and 32-bit values. There are
currently no architectures where this is the case.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some 32-bit architectures no longer have the 32-bit time_t syscalls.
Instead they have suffixed syscalls that returns a 64-bit time_t. If
the architecture doesn't have the non-suffixed syscall and is using a
64-bit time_t let's use the suffixed syscall instead.
This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel
headers.
If an architecture only supports the suffixed syscalls, but is still
using a 32-bit time_t report a compilation error. This avoids us have to
deal with converting between 64-bit and 32-bit values. There are
currently no architectures where this is the case.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some 32-bit architectures no longer have the 32-bit time_t syscalls.
Instead they have suffixed syscalls that returns a 64-bit time_t. If
the architecture doesn't have the non-suffixed syscall and is using a
64-bit time_t let's use the suffixed syscall instead.
This fixes build issues when building for RISC-V 32-bit with 5.1+ kernel
headers.
If an architecture only supports the suffixed syscalls, but is still
using a 32-bit time_t fall back to the libc call.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The following caused udhcpc to segfault:
busybox udhcpc -i lo -s /dev/null -x 0x3d:
function old new delta
udhcp_str2optset 629 641 +12
Signed-off-by: Michal Kazior <michal@plume.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The output of the command "route -n -A inet6" may be corrupted
due to partially initialized structure snaddr6 in the function
INET6_displayroutes.
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
GNU tee does this only with -p, which we don't have yet.
function old new delta
tee_main 306 295 -11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Without the 'U' unsigned suffix, gcc will throw a "integer constant is
so large that it is unsigned" warning.
Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some hosting services like sourceforge perform a lot of relocations
before actually serving the file. Example of current limitation:
busybox wget http://sourceforge.net/projects/fluxbox/files/fluxbox/1.3.7/fluxbox-1.3.7.tar.xz
Connecting to sourceforge.net (216.105.38.13:80)
Connecting to sourceforge.net (216.105.38.13:443)
Connecting to sourceforge.net (216.105.38.13:443)
Connecting to sourceforge.net (216.105.38.13:443)
Connecting to downloads.sourceforge.net (216.105.38.13:443)
wget: too many redirections
Signed-off-by: David Demelier <markand@malikania.fr>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Converted a few 16-bit variables and small arrays to 32-bit.
Stopped pulling desc->FOO members into temporary local variables
in gen_bitlen(): on register-starved arches, this is a loss,
temporaries go into stack slots.
Sprinkled a few "const" on pointer arguments.
function old new delta
pack_gzip 742 745 +3
gen_codes 101 97 -4
build_tree 886 833 -53
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 3/-57) Total: -54 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With this change, GNU gzip -n and BusyBox gzip now produce identical output
assuming that CONFIG_GZIP_FAST=2.
>> Excuse me, but I wonder one thing: Why should we follow
>> strictly with gzip on the no-options default behavior?
> First, the default 6 compression level is a de-facto standard. BSD gzip
> and Apple gzip (on macOS) use this default as well. So there is a
> reasonable expectation that different gzip implementations act the same.
> For instance, if the default for busybox gzip becomes 9, then someone
> writing a script using busybox gzip could reasonably expect that the
> compression level will still be 9 when the same script is run on another
> system. That would be wrong. Implementations should not deviate from
> de-facto standards without a strong reason.
>
> Second, the inherent reason for this default has not gone away. While
> processor speeds have exploded since the default was set, so has the
> typical size of compressed files. Multiple gigabytes are nothing unusual
> these days. And gzip is often used for compression on the fly, precisely
> because it offers a good compromise between speed and compression ratio.
> So I believe 6 continues to be a reasonable default.
function old new delta
deflate 939 927 -12
Signed-off-by: Daniel Edgecumbe <git@esotericnonsense.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With this change and CONFIG_GZIP_FAST=2, CONFIG_FEATURE_GZIP_LEVELS=y,
GNU gzip and BusyBox gzip now produce identical output at each compression
level (excluding 1..3, as BusyBox does not implement these levels).
Signed-off-by: Daniel Edgecumbe <git@esotericnonsense.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This matches the behaviour of both GNU dc (as specified in
its man page), and BSD dc (where stack_popstring() pops
only if the head is a string.)
Add a couple of tests to verify this behavior.
function old new delta
zxc_vm_process 6882 6884 +2
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This prevents first update from showing incorrect CPU usage data
function old new delta
handle_input 620 643 +23
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit d1a2fa2a4 (ash: catch error in arithmetic expansion in PS1)
catches all exceptions raised by expandarg(). Some exceptions, such as
the EXEXIT raised when command expansion is used, are expected:
export PS1='$(echo "$ ")'
These should be processed normally or the shell hangs at the prompt.
function old new delta
expandstr 344 353 +9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 9/0) Total: 9 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Back in 2007, commit 0c97c9d437 ("'simple' error message functions by
Loic Grenie") introduced bb_simple_perror_msg() to allow for a lower
overhead call to bb_perror_msg() when only a string was being printed
with no parameters. This saves space for some CPU architectures because
it avoids the overhead of a call to a variadic function. However there
has never been a simple version of bb_error_msg(), and since 2007 many
new calls to bb_perror_msg() have been added that only take a single
parameter and so could have been using bb_simple_perror_message().
This changeset introduces 'simple' versions of bb_info_msg(),
bb_error_msg(), bb_error_msg_and_die(), bb_herror_msg() and
bb_herror_msg_and_die(), and replaces all calls that only take a
single parameter, or use something like ("%s", arg), with calls to the
corresponding 'simple' version.
Since it is likely that single parameter calls to the variadic functions
may be accidentally reintroduced in the future a new debugging config
option WARN_SIMPLE_MSG has been introduced. This uses some macro magic
which will cause any such calls to generate a warning, but this is
turned off by default to avoid use of the unpleasant macros in normal
circumstances.
This is a large changeset due to the number of calls that have been
replaced. The only files that contain changes other than simple
substitution of function calls are libbb.h, libbb/herror_msg.c,
libbb/verror_msg.c and libbb/xfuncs_printf.c. In miscutils/devfsd.c,
networking/udhcp/common.h and util-linux/mdev.c additonal macros have
been added for logging so that single parameter and multiple parameter
logging variants exist.
The amount of space saved varies considerably by architecture, and was
found to be as follows (for 'defconfig' using GCC 7.4):
Arm: -92 bytes
MIPS: -52 bytes
PPC: -1836 bytes
x86_64: -938 bytes
Note that for the MIPS architecture only an exception had to be made
disabling the 'simple' calls for 'udhcp' (in networking/udhcp/common.h)
because it made these files larger on MIPS.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I noticed that the 'used' values from busybox free and
procps-ng free differed so I looked into why. It turns
out that procps-ng uses the "SReclaimable" value as
part of the cached value.
This was changed in
procps-ng commit 05d751c4f076a2f0118b914c5e51cfbb4762ad8e
function old new delta
free_main 633 653 +20
Signed-off-by: Lukas Rusak <lorusak@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Resolved a TODO by adding support for gateway_nip parameter.
function old new delta
udhcp_run_script 792 835 +43
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently start-stop-daemon fails when using both the -c option (set uid)
and -N option (set niceness/priority) as it first drops privileges and then
tries to increase the priority. This patch changes the order of execution.
Signed-off-by: Aitor Esteve Alvarado <aesteve@singularaircraft.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Adds the -d option to run mdev in daemon mode handling hotplug events
from the kernel like udev. If the system generates many hotplug events
this mode of operation will consume less resources than registering
mdev as hotplug helper or using the uevent applet.
function old new delta
daemon_loop - 152 +152
initial_scan - 127 +127
open_mdev_log - 85 +85
mdev_main 255 314 +59
packed_usage 33284 33316 +32
process_action 1051 992 -59
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/1 up/down: 455/-59) Total: 396 bytes
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This purely moves code from main() to separate functions for better
extensibility.
Signed-off-by: Jan Klötzke <jan@kloetzke.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map"
text data bss dec hex filename
952537 485 7296 960318 ea73e busybox_old
952527 485 7296 960308 ea734 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"env - hush SCRIPT" invocation (that is, with empty environment)
should not show PS1/2 in "set" output.
function old new delta
hush_main 1070 1075 +5
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
gcc accepts
__asm__ ( "" : : : "%cc");
but cc is not a real register and clang does not like it.
networking/tls_pstm_montgomery_reduce.c:385:4: error: unknown register name '%cc' in asm
| INNERMUL;
| ^
The % syntax nominally goes before a register, in this case cc,
like "memory" isn't a true register it's just a way of specifying that
the condition code registers for the target are clobbered
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Assignments / exports / unsets of variables are far more frequent than
prompt printing, and if we show prompt, we are likely to be limited by
user typing speed - do not optimize for that scenario.
Just re-query $PS1 / $PS2 values when need to show the prompt.
function old new delta
fgetc_interactive 236 259 +23
set_vars_and_save_old 150 147 -3
pseudo_exec_argv 597 594 -3
hush_main 1110 1105 -5
enter_var_nest_level 38 32 -6
builtin_local 56 50 -6
run_pipe 1857 1834 -23
leave_var_nest_level 127 98 -29
handle_changed_special_names 111 79 -32
cmdedit_update_prompt 57 - -57
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/8 up/down: 23/-164) Total: -141 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
$ dd bs=1G <sda1 of=/dev/sda1
dd: error writing '/dev/sda1': No space left on device
1+0 records in
0+0 records out
999292928 bytes (953.0MB) copied, 0.784617 seconds, 1.2GB/s
function old new delta
write_and_stats 99 102 +3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Between Busybox 1.24.2 and 1.25.0 the bb_info_msg() function was
eliminated and calls to it changed to be bb_error_msg(). The downside of
this is that daemons now log all messages to syslog at the LOG_ERR level
which makes it hard to filter errors from informational messages.
This change optionally re-introduces bb_info_msg(), controlled by a new
option FEATURE_SYSLOG_INFO, restores all the calls to bb_info_msg() that
were removed (only in applets that set logmode to LOGMODE_SYSLOG or
LOGMODE_BOTH), and also changes informational messages in ifplugd and
ntpd.
The code size change of this is as follows (using 'defconfig' on x86_64
with gcc 7.3.0-27ubuntu1~18.04)
function old new delta
bb_info_msg - 182 +182
bb_vinfo_msg - 27 +27
static.log7 194 198 +4
log8 190 191 +1
log5 190 191 +1
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 3/0 up/down: 215/-45) Total: 170 bytes
If you don't care about everything being logged at LOG_ERR level
then when FEATURE_SYSLOG_INFO is disabled Busybox actually gets smaller:
function old new delta
static.log7 194 200 +6
log8 190 193 +3
log5 190 193 +3
syslog_level 1 - -1
bb_verror_msg 583 581 -2
crondlog 45 - -45
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 3/1 up/down: 12/-48) Total: -36 bytes
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The 'G' command was omitted from the list of commands that change or
delete whole lines. Add it in the appropriate places so the 'dG',
'cG' and 'yG' commands work, including in cases where an explicit
line number has been supplied.
function old new delta
find_range 534 596 +62
.rodata 175166 175167 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 63/0) Total: 63 bytes
Reported-by: David Kelly <david.kelly@liberica.ch>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
As reported in bug 11796 BusyBox vi incorrectly handles changes
to a word at the end of a line. If the following line starts
with whitespace changing or deleting the last word of a line
with the 'cw' or 'dw' commands causes the lines to be joined.
This happens because the range for the change returned by
find_range() covers all whitespace after the word, including
newlines. The problem can be fixed by setting 'ml' to zero
to indicate to yank_delete() that processing should stop at
the end of the current line.
However, this results in a new problem. 'dw' correctly deletes
all whitespace following the word but so does 'cw', which should
preserve the trailing whitespace. To fix this the code to omit
whitespace from the change is modified to include all whitespace
not just blanks.
function old new delta
do_cmd 5034 5069 +35
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 35/0) Total: 35 bytes
Reported-by: David Kelly <david.kelly@liberica.ch>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 088fec36fe made -x required for
all. However it isn't for -K.
function old new delta
start_stop_daemon_main 1084 1105 +21
packed_usage 33343 33326 -17
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 21/-17) Total: 4 bytes
Signed-off-by: Alexander Vickberg <wickbergster@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Setting PS1 to:
PS1='$((123+))'
causes the shell to enter an infinite error loop:
sh: arithmetic syntax error
Catch any exception raised by expandarg() in expandstr() and allow
processing to continue.
function old new delta
expandstr 262 344 +82
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 82/0) Total: 82 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Setting PS1 to:
PS1='`xxx(`'
causes the shell to terminate with the error:
sh: syntax error: unexpected end of file (expecting ")")
This happens because old-style backquotes require the input to be reread
and thus call setinputstring() a second time. Prevent the problem by
unwinding all recently opened files in expandstr().
function old new delta
unwindfiles - 22 +22
expandstr 247 262 +15
forkchild 631 625 -6
evalcommand 1694 1685 -9
ash_main 1346 1336 -10
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/3 up/down: 37/-25) Total: 12 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Pass the Authorization header to CGI if not of type Basic. This will
make it possible for CGI to verify authorization headers of type
Bearer <token>.
function old new delta
handle_incoming_and_exit 2370 2379 +9
Signed-off-by: Alexander Vickberg <wickbergster@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Today for gzipped content httpd is using a header with name
Transfer-Length. However I can't find a header with that name in the
standards. Instead use Content-Length.
function old new delta
.rodata 157940 157936 -4
send_headers 980 939 -41
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-45) Total: -45 bytes
Signed-off-by: Alexander Vickberg <wickbergster@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bash 5.0 added the dynamic variable EPOCHSECONDS and EPOCHREALTIME
which return the number of seconds since the Unix Epoch as an
integer or float. These are useful for logging or tracing.
function old new delta
change_epoch - 78 +78
.rodata 175167 175235 +68
varinit_data 264 312 +48
change_seconds - 24 +24
change_realtime - 24 +24
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 2/0 up/down: 242/0) Total: 242 bytes
text data bss dec hex filename
938508 4203 1888 944599 e69d7 busybox_old
938702 4203 1888 944793 e6a99 busybox_unstripped
v2: Cast tv_sec and tv_usec to unsigned quantities.
Add brackets to macros.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit b28d4c346 (ash: [VAR] Move unsetvar functionality into setvareq)
dropped the code that caused dynamic variables to lose their special
properties when unset. Add it back again.
function old new delta
setvareq 346 360 +14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 14/0) Total: 14 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bash 5.0 added the dynamic variable EPOCHSECONDS and EPOCHREALTIME
which return the number of seconds since the Unix Epoch as an
integer or float. These are useful for logging or tracing.
function old new delta
get_local_var_value 207 302 +95
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 95/0) Total: 95 bytes
text data bss dec hex filename
938702 4203 1888 944793 e6a99 busybox_old
938797 4203 1888 944888 e6af8 busybox_unstripped
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Set up environment variables before running the CGI script.
The variables will be named HTTP_<filtered_name> where the <filtered_name>
is the header name capitalized and all characters not matching
[a-z] | [A-Z] | [0-9] replaced with '_'.
function old new delta
http_response 80 88 +8
http_response_type 20 22 +2
send_headers 718 715 -3
parse_conf 1481 1478 -3
get_line 128 110 -18
cgi_io_loop_and_exit 599 569 -30
send_cgi_and_exit 882 738 -144
handle_incoming_and_exit 2793 2592 -201
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/6 up/down: 10/-399) Total: -389 bytes
text data bss dec hex filename
982178 485 7296 989959 f1b07 busybox_old
981675 485 7296 989456 f1910 busybox_unstripped
Signed-off-by: Alexander Vickberg <wickbergster@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The proxying is documented as follows:
P:/url:[http://]hostname[:port]/new/path
Howeverm urlcopy is not a true copy anymore when it is fdprint'ed
to proxy_fd, this is because percent_decode_in_place() is called
after the copy is created.
This breaks reverse proxying all URIs containing percent
encoded spaces, e.g. - because a decoded URI will be printed out
to proxy_fd instead of the original.
The fix keeps the logic in place to canonicalize the uri first,
before reverse proxying (one could argue that the uri
should be proxied completely unaltered, except for the prefix
rewrite).
function old new delta
handle_incoming_and_exit 2752 2792 +40
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If /etc/resolv.conf is a symlink to a tmpfs and the actual file does not
already exist, "readlink -f" will not detect it as symlink. Explicitely check
for that condition before and touch the file, making the other code work as
intended.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Support for the IEEE timezone string and timezone database strings (100
and 101 options respectively) is added for ipv4, conforming to RFC-4833.
The two options are passed to hook scripts in the variables tzstr and
tzdbstr.
function old new delta
dhcp_option_strings 280 294 +14
dhcp_optflags 76 80 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 18/0) Total: 18 bytes
Signed-off-by: Antoine Girard-Vallée <antoine.girard-vallee@savoirfairelinux.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
ipaddress.c: In function ‘ipaddr_list_or_flush’:
ipaddress.c:427:6: warning: variable ‘no_link’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
I've had a case of a machine where eth0 was appearing a bit later
after the boot, and appearing _downed_. ifplugd then fails to detect
"link up". Thus, depending on how service startup
("ip link set dev eth0 up") races with driver initialization,
ethernet randomly fails to initialize on boot.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In particular useful when you want to evaluate the threads in batch mode:
top -Hbn1
function old new delta
top_main 928 941 +13
packed_usage 33317 33319 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 15/0) Total: 15 bytes
Signed-off-by: Philippe Belet <philippe.belet@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If vi is built with FEATURE_VI_USE_SIGNALS disabled and
FEATURE_VI_WIN_RESIZE enabled new_screen() is used without a
declaration. Move the function to avoid this.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With FEATURE_SYNC_FANCY not set:
function old new delta
fsync_main 130 123 -7
With FEATURE_SYNC_FANCY set, should be much larger code size savings.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
sync: add O_NOCTTY
fsync: drop O_NOATIME, add O_NONBLOCK, set exitcode to 1 if fsync() fails,
update --help message to be similar to sync.
both: reformat code to minimize "diff -u sync.c fsync.c":
in particular, they use same open() flags now
function old new delta
fsync_main 126 130 +4
packed_usage 33316 33317 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 5/0) Total: 5 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add a specific define to indicate which bash compatibility code
implements 'wait -n'.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is the last use of "vsprintf" in busybox:
function old new delta
status_line_bold 72 77 +5
status_line 40 45 +5
vsprintf 23 - -23
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 2/0 up/down: 10/-23) Total: -13 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit db169f2538 breaks the "ip -o link"
command, no output is displayed.. Fix by only excluding the link info if
in oneline mode and if the address family is not AF_PACKET.
function old new delta
ipaddr_list_or_flush 1232 1202 -30
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
On platforms that don't support SIGWINCH vi can be configured
with FEATURE_VI_USE_SIGNALS disabled and FEATURE_VI_WIN_RESIZE
enabled. This allows the user to force an update with ^L when
the screen is resized.
However, because the SIGWINCH handler hasn't run the virtual
screen buffer won't have been updated and the display becomes
corrupted. Fix this by calling new_screen() if necessary.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Building with individual binaries enabled fails when embedded
script applets are included:
/tmp/ccIvMFZg.o: In function `main':
applet.c:(.text.main+0x20): undefined reference to `scripted_main'
Mark scripted_main() as externally visible.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If the MANPATH environment variable isn't set a provisional default
path of /usr/man is placed in man_path_list. This is only used if a
configuration file doesn't contain an alternative path.
If a configuration file lists the default path first:
MANPATH /usr/man:/usr/share/man
add_MANPATH() sees that the default entry is already present and skips
it. As a result man_path_list only contains the second and subsequent
components of the configured MANPATH.
In such cases the path should not be skipped.
function old new delta
add_MANPATH 170 183 +13
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 13/0) Total: 13 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
cluster_count is compared against FAT16_MAX, which is defined as 0xfff4
That is the maximum number of cluster a FAT16 can have.
For reference also check the hardware whitepaper from Microsoft
FAT: General Overview of On-Disk Format, version 1.03 page 15
Signed-off-by: Thomas Frauendorfer <tf@miray.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently, running "udhcpc -n -b" causes udhcpc to go to background and
then exit after some time unless a lease is obtained.
It's not very useful to do so
as the calling process doesn't know
if the lease was obtained or not anyway.
The code actually tries to favor "-b" over "-n",
but doesn't clear "-n" flag while clearing "-b" after backgrounding.
So, clear "-n" flag after going into background.
This effectively makes "-b" override "-n" completely
and "-n -b" behave the same as "-b".
This allows to override default "-n" option, passed to udhcpc by ifupdown,
without recompiling busybox.
URL: https://bugs.busybox.net/11691
Signed-off-by: Andrey Mazo <ahippo@yandex.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The following constructs result in ever-increasing memory usage:
while true; do { true; } </dev/null; done
while true; do ( true; ) </dev/null; done
For comparison, bash displays static memory usage in both cases.
This has been fixed in dash by commit 2bc6caa. The maintainer
writes:
I have simplified evaltree so that it simply sets the stack mark
unconditionally. This allows us to remove the stack marks in the
functions called by evaltree.
Closes BusyBox bug 7748.
function old new delta
evaltree 606 632 +26
evalcommand 1724 1696 -28
evalcase 382 351 -31
evalfor 230 196 -34
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 26/-93) Total: -67 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Call i2c_set_slave_addr() unconditionally as busy checking
is skipped depending on force argument.
Clarify usage texts for -f and -a flags.
Signed-off-by: Nikolaus Voss <nv@vosn.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit bb983f30e (vi: fix faulty undo after autoinsert) has a
number of problems:
- The commit message refers to 'autoinsert' when it really means
'autoindent'.
- The indentation of undo_push_insert() was incorrect.
- Most seriously the commit only fixed the problem for cases where
the indentation was exactly one character. This is because undo_push()
only allows single characters to be queued for UNDO_INS_QUEUED.
Lifting this restriction allows the example given in the previous
commit message (with a three character indent) to work.
function old new delta
undo_push 406 435 +29
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 29/0) Total: 29 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
i2ctransfer sends and receives user defined i2c messages
v2: apply Xabier's comments: add -a option, don't decrement argc,
use bb_show_usage() and xzalloc()
v3: fix possible out of bound access to msgs[nmsgs]
Reviewed-by: Xabier Oneca -- xOneca <xoneca@gmail.com>
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently if the 'r' command is followed by a carriage return a
literal CR replaces the current character.
Fix this so that:
- a new line is inserted
- the autoindent setting is respected
- the cursor is placed at the start of the new line
function old new delta
do_cmd 5052 5060 +8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 8/0) Total: 8 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Enable autoinsert and enter the following with an indent of three
spaces:
line 1
line 2
Using 'u' to undo the last insert results in:
line1e 2
The insertion of the indent hasn't been properly recorded.
Since recording insertions is a common operation add a convenience
function, undo_push_insert(), to handle this and use it to record
the autoindent correctly.
function old new delta
undo_push_insert - 36 +36
string_insert 133 129 -4
char_insert 518 473 -45
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/2 up/down: 36/-49) Total: -13 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
fdisk, hexedit and ed calls read_line_edit in libbb/lineedit.c with NULL
as first argument. On line 2373 of lineedit.c of busybox version 1.29.3,
state->hist_file is referenced without checking the state->flag.
This causes segmentation fault on fdisk, hexedit and ed on ARM Cortex-A9.
It somehow works on x86_64.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
A small optimization. There is no need to try matching the current
input line against any further patterns if a match was already
found and -v is specified.
function old new delta
grep_file 1463 1440 -23
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Niko Vähäsarja <niko@tuxera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We found out that busybox -x -v is a bit broken:
ari@ari-thinkpad:~/busybox$ echo ' aa bb cc' | ./busybox grep -x -e 'aa.*' -e '.*bb.*'
aa bb cc
ari@ari-thinkpad:~/busybox$ echo ' aa bb cc' | ./busybox grep -x -v -e 'aa.*' -e '.*bb.*'
ari@ari-thinkpad:~/busybox$ echo ' aa bb cc' | ./busybox grep -x -e '.*aa.*' -e 'bb.*'
aa bb cc
ari@ari-thinkpad:~/busybox$ echo ' aa bb cc' | ./busybox grep -x -v -e '.*aa.*' -e 'bb.*'
aa bb cc
Last one is wrong.
This patch fixes the issue by making sure that the variable 'found'
never makes a transition from 1 to 0, as this would mean that
grep previously found a match on this input line.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Niko Vähäsarja <niko@tuxera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The proto has to be passed in network byte-order.
While at it allow for
ip link add link eth0 name eth0.2.24 type vlan proto 802.1ad id 24
ip link del link eth0 name eth0.2.24 type vlan proto 802.1ad id 24
The del was lacking a dev_str and thus errored out. Fix by using
name/dev counterpart as fallback.
The proto identifier 802.1Q was not recognized, just it's lowercase
variant, fix that too.
function old new delta
do_add_or_delete 1275 1376 +101
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 101/0) Total: 101 bytes
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
If there's any whitespace between w and the filename, parse_file_cmd
writes to the wrong offset when trying to fix up backslashes.
This can be seen in the asan build with busybox sed -e 'w 0\\'
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Unlike exit and return, delete strictly requires an arg, and derefs a
null pointer if executed without one.
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Avoids an uninit pointer deref for some malformed ternary exprs.
Add a test that would crash in busybox before this fix.
Signed-off-by: Brian Foley <bpfoley@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When printing notification on download start and end,
mistakenly, it didn't respect the quiet option
function old new delta
retrieve_file_data 561 579 +18
wget_main 2432 2437 +5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This removes DAEMON_DOUBLE_FORK flag from bb_daemonize_or_rexec(),
as SSD was the only user.
Also includes fix for -S: now works without -a and -x,
does not print pids
(compat with "start-stop-daemon (OpenRC) 0.34.11 (Gentoo Linux)").
function old new delta
start_stop_daemon_main 1018 1084 +66
add_interface 99 103 +4
fail_hunk 139 136 -3
bb_daemonize_or_rexec 205 183 -22
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/2 up/down: 70/-25) Total: 45 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
statement parsing must NOT eat the terminator: caller needs to know
what it was, to correctly decide whether it is a valid one.
function old new delta
zxc_program_read - 234 +234
zdc_program_printStream - 144 +144
zbc_parse_stmt_possibly_auto 1413 1460 +47
zxc_vm_process 869 859 -10
zxc_program_exec 4116 4101 -15
zdc_program_asciify 368 - -368
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 1/2 up/down: 425/-393) Total: 32 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fix for running passwd as root (or sudo passwd $USER).
Crashed on call to free(orig) during cleanup.
Fix regression from commit 17058a06c4
Root user never changes the orig pointer, so when cleaning up, passwd tried to
free orig=(char*)""
Example: sudo passwd $USER
Changing password for xxx
New password:
Bad password: too short
Retype password:
Passwords don't match
free(): invalid pointer
Aborted
function old new delta
passwd_main 958 961 +3
Signed-off-by: Einar Jón <tolvupostur@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The real telnet provides some feedback:
Trying 127.0.0.1...
Connected to localhost.localdomain.
Escape character is '^]'.
We should do this to, because people are sitting there and think
a firewall is dropping packets.
function old new delta
telnet_main 1270 1279 +9
Signed-off-by: Danijel Tasov <m@rbfh.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When using -o to file the progress meter is not displayed, so write that
we started the download and that we finished it.
function old new delta
retrieve_file_data 465 561 +96
wget_main 2412 2432 +20
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 116/0) Total: 116 bytes
text data bss dec hex filename
979022 485 7296 986803 f0eb3 busybox_old
979224 485 7296 987005 f0f7d busybox_unstripped
Signed-off-by: Martin Lewis <martin.lewis.x84@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In non-interactive config, they either return 'success', or do not return.
function old new delta
zbc_posix_error_fmt 41 39 -2
bc_parse_expr_empty_ok 1751 1744 -7
zbc_parse_stmt_possibly_auto 1322 1314 -8
------------------------------------------------------------------------------
(add/remove: 5/5 grow/shrink: 0/2 up/down: 118/-135) Total: -17 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Order now is:
enums/structures/defines,
utility/common functions,
parsing,
execution,
main loop,
main()
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This clearly shows one place which would need changing
for nested funcdefs to work.
function old new delta
bc_parse_reset 106 110 +4
zbc_vm_process 586 585 -1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 4/-1) Total: 3 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This actually fixes a rather obscure bug. This was failing to find
end of the string:
$ echo -n '[foo]' | dc
dc: string end could not be found
function old new delta
zbc_lex_next 2230 2141 -89
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-89) Total: -89 bytes
text data bss dec hex filename
981461 485 7296 989242 f183a busybox_old
981372 485 7296 989153 f17e1 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It is misplaced: caller knows better what can or cannot follow the expression.
Sometimes even caller's caller: "if (1) return a+b else..." -
parser of "return" does not know that "else" after it is valid,
parser of stmt does not know it either, - only parser of
"if" knows it!
The removed code balked on e.g. "{ print 1 }" statement.
This does not break any valid programs, but starts accepting some
invalid ones, e.g. "print 1 print 2" would work.
function old new delta
zcommon_parse_expr 40 32 -8
zbc_parse_name 509 494 -15
zbc_parse_stmt_possibly_auto 1678 1638 -40
bc_parse_expr_empty_ok 2025 1977 -48
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-111) Total: -111 bytes
text data bss dec hex filename
981599 485 7296 989380 f18c4 busybox_old
981488 485 7296 989269 f1855 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Attempt to have more than one causes this error message:
$ bc -q
if (1)<cr>
<cr>
bc: no statement after 'if'
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The entire control construct (if/while/for/funcdef) or {} block is
"eaten" by the corresponding parsing function, instead of maintaining
special "block flag stack" with magic bits in it, and returning to main
input loop after every inner statement (every input line, essentially).
This required moving line input deep into lexer - now zbc_lex_next()
triggers more reading when needed.
"block flag stack" is gone.
Correctness of ^C handling wasn't checked, might need fixing now.
if/else syntax is changed to match GNU bc: "else" can not be on
the next line (the rationale is that "if (1) 2" statement in interactive
mode should execute and print 2 instead of waiting for possible
"else ..." line).
This change fixes the following examples:
if (1) if (1) 1 else 2 else 3
if (0) 1 else if (1) 2
define w() { auto z; return 1; }
function old new delta
zbc_parse_stmt_possibly_auto - 2232 +2232
zbc_vm_process 89 561 +472
zbc_lex_next 1982 2296 +314
bc_vm_init 749 757 +8
bc_parse_expr_empty_ok 2016 2021 +5
bc_num_printNewline 54 51 -3
zbc_program_read 289 280 -9
bc_parse_free 47 38 -9
bc_parse_reset 126 113 -13
bc_parse_create 108 92 -16
bc_parse_push_block_flag 47 - -47
bc_parse_noElse 48 - -48
zbc_parse_text_init 113 59 -54
zbc_parse_body 121 - -121
zbc_parse_else 125 - -125
zbc_parse_endBody 254 - -254
bc_vm_run 421 134 -287
zbc_parse_auto 290 - -290
zcommon_parse 476 - -476
zbc_parse_stmt 1682 7 -1675
------------------------------------------------------------------------------
(add/remove: 1/7 grow/shrink: 4/8 up/down: 3031/-3427) Total: -396 bytes
text data bss dec hex filename
982586 485 7296 990367 f1c9f busybox_old
982138 485 7296 989919 f1adf busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Each access to current top flag took a function call + fetch of three data items
+ multiplication and some additions + and then following the resulting pointer.
After the change, it is: fetch pointer value + one byte access via this pointer.
function old new delta
bc_parse_startBody 45 49 +4
bc_parse_free 46 47 +1
zbc_parse_auto 188 185 -3
bc_parse_push 14 11 -3
bc_vm_run 398 394 -4
zbc_vm_process 63 58 -5
zdc_parse_expr 638 632 -6
zbc_parse_body 101 95 -6
bc_parse_addFunc 31 25 -6
bc_parse_noElse 56 48 -8
zcommon_parse 341 331 -10
zbc_parse_else 134 123 -11
bc_parse_create 124 108 -16
zbc_parse_text_init 123 104 -19
zbc_parse_endBody 292 252 -40
zbc_parse_stmt 1479 1420 -59
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/14 up/down: 5/-196) Total: -191 bytes
text data bss dec hex filename
979880 485 7296 987661 f120d busybox_old
979689 485 7296 987470 f114e busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
$ bc -q
read()
2^D^D2
^ prints the result of read()'ed expression
function old new delta
zbc_program_print 629 642 +13
bc_program_read 322 312 -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 13/-10) Total: 3 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With direct calls, GCC no longer thinks that we take addresses of the functions,
and can use "more optimal" internal ABI for _all_ calls to these functions,
not only at this callsite. On i486, regparm is used, and:
function old new delta
zbc_num_inv 56 57 +1
zbc_num_k 852 851 -1
zbc_program_modexp 558 556 -2
zbc_num_d 541 539 -2
bc_num_ulong2num 59 57 -2
zbc_program_num 840 836 -4
bc_num_zero 11 7 -4
bc_num_one 28 24 -4
bc_program_exec 3928 3918 -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/8 up/down: 1/-29) Total: -28 bytes
text data bss dec hex filename
982237 485 7296 990018 f1b42 busybox_old
982209 485 7296 989990 f1b26 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Pulling array element into a temporary, taking address of this temporary
and copying it? That's much unnecessary work.
function old new delta
dc_lex_token 701 697 -4
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Examples:
On stdin, no file name is available:
$ echo 'print "' | busybox bc
bc: string end could not be found
When the same error is in file:
$ busybox bc FILE
bc 1.30.0.git
Copyright (c) 2018 Gavin D. Howard and contributors
Report bugs at: https://github.com/gavinhoward/bc
This is free software with ABSOLUTELY NO WARRANTY
FILE: string end could not be found
ready for more input
>>>
Line number printing to be added later...
function old new delta
bc_error_fmt 38 70 +32
bc_posix_error_fmt 60 90 +30
bc_vm_run 1900 1919 +19
bc_program_read 338 355 +17
bc_lex_file 15 12 -3
bc_program_stdin_name 8 - -8
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 4/1 up/down: 98/-11) Total: 87 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It was only used to indicate rusult of bc_map_insert() - did we insert, or
did we find that this key is already in the map?
function old new delta
bc_map_insert 142 145 +3
bc_program_addFunc 226 225 -1
bc_err_msgs 184 180 -4
bc_program_search 152 143 -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 3/-14) Total: -11 bytes
text data bss dec hex filename
987904 485 7296 995685 f3165 busybox_old
987873 485 7296 995654 f3146 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The most informative message can be generated at the location
where error is detected. The "error codes" are stupid:
print error meesage immediately, then just return "there was an error"
indicator.
All error codes will be converted. For now, converting these two.
For now, this and following changes will degrade error messages
quality. For example, file name and line number printouts may be lost.
This will be re-added later.
This change anlso fixes handling of invalid stdin input:
this used to cause interactive bc to exit:
....
>>> ς
bc: illegal character 0xcf
bc: illegal character 0x82
>>> _
function old new delta
bc_error - 42 +42
bc_lex_token 1333 1369 +36
dc_lex_token 675 695 +20
bc_read_line 311 325 +14
bc_num_a 456 454 -2
bc_err_msgs 188 184 -4
bc_num_ulong 95 85 -10
bc_vm_run 1984 1955 -29
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/4 up/down: 112/-45) Total: 67 bytes
text data bss dec hex filename
987828 485 7296 995609 f3119 busybox_old
987929 485 7296 995710 f317e busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Checking it in individual operations such as SQRT is not necessary
since they usually do not take very long to complete. We repeatedly return
to main loop.
TODO: re-add more fine-grained ^C checks - but only with examples where it is
actually needed. E.g. I suspect simplest ops like addition or compare won't need it.
function old new delta
bc_program_index 66 64 -2
bc_num_s 258 246 -12
bc_num_cmp 294 275 -19
bc_num_compare 84 59 -25
bc_num_subArrays 74 47 -27
bc_num_a 474 445 -29
bc_program_exec 4530 4500 -30
bc_num_p 518 472 -46
bc_num_d 604 558 -46
bc_num_k 1005 957 -48
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/10 up/down: 0/-284) Total: -284 bytes
text data bss dec hex filename
988601 485 7296 996382 f341e busybox_old
988317 485 7296 996098 f3302 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Michał Berger has reported two issues:
- Repeatedly deleting and undoing the deletion of the last line
results in characters being lost from the end of the line.
- Deleting the bottom line twice then attempting to undo each of
these deletions results in a segfault.
The problem seems to be an incorrect test for whether the text buffer
is empty.
Reported-by: Michał Berger <michallinuxstuff@gmail.com>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If busybox is compiled with FEATURE_VI_REGEX_SEARCH enabled, command
":s/x/y/" searches not only in the current line, but continues search
after it. This makes range searches (":1,3s/x/y/") work incorrect. For
example file "./test":
1
2
3
$ vi ./test
:1,2s/3/e/
gives us:
1
2
e
function old new delta
char_search 213 241 +28
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The '-t' option for od is enabled by CONFIG_DESKTOP. So
check this config before using 'od -t' in test cases.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Embedded scripts require a shell to be present in the BusyBox
binary. Allow either ash or hush to be used for this purpose.
If both are enabled ash takes precedence.
The size of the binary is unchanged in the default configuration:
both ash and hush are present but support for embedded scripts
isn't compiled into hush.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The embedded script feature makes it easier to create applets with
duplicate names. Currently in such cases the build succeeds but
the resulting executable doesn't work as the developer intended.
Catch duplicate names when the applet tables are being generated
and make the build fail.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
- Force a rebuild if a script in applets_sh is changed.
- Move the dummy usage messages for custom applets to usage.h and
change the name from 'dummy' to 'scripted'.
- Hide an error from gen_build_files.sh if an embed directory exists
but is empty.
- Tidy up embedded_scripts script.
v2: Remove a couple of unnecessary tests in embedded_scripts, as
pointed out by Xabier Oneca.
Drop the stripping of comments.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The parser reads from an already freed memory location, thereby causing
unpredictable results, in the following situation:
- ENABLE_ASH_EXPAND_PRMT is enabled
- heredoc is being parsed
- command substitution is used within heredoc
Examples where this bug crops up are (PS2 is set to "> "):
$ cat <<EOF
> `echo abc`
> EOF
-sh: O: not found
$ cat <<EOF
> $(echo abc)
> EOF
-sh: {garbage}: not found
The presumable reason is that setprompt_if() causes a nested expansion when
ENABLE_ASH_EXPAND_PRMT is enabled, therefore leaving "wordtext" in an unusable
state. However, when parseheredoc() is called, "tokpushback" is non-zero, which
causes the next call to xxreadtoken() to return TWORD, causing the caller to
use the invalid "wordtoken" instead of reading the next valid token.
The call chain is:
list()
-> peektoken() [sets tokpushback to 1]
-> parseheredoc()
-> setprompt_if()
-> pushstackmark()
-> expandstr()
-> readtoken1()
[sets lasttoken to TWORD, wordtoken points to expanded prompt]
-> popstackmark() [invalidates wordtoken, leaves lasttoken as is]
-> readtoken1()
-> ...parsebackq
-> list()
-> andor()
-> pipeline()
-> readtoken()
-> xxreadtoken()
[tokpushback non-zero, reuse lasttoken and wordtext]
Note that in almost all other contexts, each call to setprompt_if() is preceded
by setting "tokpushback" to zero. One exception is "oldstyle" backquote parsing
in readtoken1(), but there "tokpushback" is reset afterwards. The other
exception is nlprompt(), but this function is only used within readtoken1()
(but in contexts where no nested calls to xxreadtoken() occur) and xxreadtoken()
(where "tokpushback" is guaranteed to be zero).
function old new delta
parseheredoc 124 131 +7
Signed-off-by: Christoph Schulz <develop@kristov.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Before:
Trying libraries: crypt m resolv
Library crypt is not needed, excluding it
Library m is needed, can't exclude it (yet)
Library resolv is needed, can't exclude it (yet)
Library m is needed, can't exclude it (yet)
Library resolv is needed, can't exclude it (yet)
Final link with: m resolv
After:
Trying libraries: crypt m resolv
Library crypt is not needed, excluding it
Library m is needed, can't exclude it (yet)
Library resolv is needed, can't exclude it (yet)
Final link with: m resolv
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The build process for embedded scripts didn't have consistent
support for saving output to a different directory.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add an option to allow the content of embedded scripts to be
displayed. This includes applet scripts, custom scripts and the
.profile script.
function old new delta
busybox_main 624 701 +77
find_script_by_name - 24 +24
scripted_main 41 35 -6
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/1 up/down: 101/-6) Total: 95 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
BusyBox has support for embedded shell scripts. Two types can be
distinguished: custom scripts and scripts implementing applets.
Custom scripts should be placed in the 'embed' directory at build
time. They are given a default applet configuration and appear
as applets to the user but no further configuration is possible.
Applet scripts are integrated with the BusyBox build system and
are intended to be used to ship standard applets that just happen
to be implemented as scripts. They can be configured at build time
and appear just like native applets.
Such scripts should be placed in the 'applets_sh' directory. A stub
C program should be written to provide the usual applet configuration
details and placed in a suitable subsystem directory. It may be
helpful to have a configuration option to enable any dependencies the
script requires: see the 'nologin' applet for an example.
function old new delta
scripted_main - 41 +41
applet_names 2773 2781 +8
applet_main 1600 1604 +4
i2cdetect_main 672 674 +2
applet_suid 100 101 +1
applet_install_loc 200 201 +1
applet_flags 100 101 +1
packed_usage 33180 33179 -1
tryexec 159 152 -7
evalcommand 1661 1653 -8
script_names 9 - -9
packed_scripts 123 114 -9
complete_cmd_dir_file 826 811 -15
shellexec 271 254 -17
find_command 1007 990 -17
busybox_main 642 624 -18
run_applet_and_exit 100 78 -22
find_script_by_name 51 - -51
------------------------------------------------------------------------------
(add/remove: 1/2 grow/shrink: 6/9 up/down: 58/-174) Total: -116 bytes
text data bss dec hex filename
950034 477 7296 957807 e9d6f busybox_old
949918 477 7296 957691 e9cfb busybox_unstripped
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When a variable is unset by calling setvar(name, NULL, 0) the code
to initialise the new, empty variable fails to initialise the last
character of the string.
Attempts to read the contents of the unset variable will result
in the uninitialised character at the end of the string being
accessed.
For example, running BusyBox under Valgrind and unsetting PATH:
$ valgrind ./busybox_unstripped sh
==21249== Memcheck, a memory error detector
==21249== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
==21249== Using Valgrind-3.14.0 and LibVEX; rerun with -h for copyright info
==21249== Command: ./busybox_unstripped sh
==21249==
/data2/git/build_fix_8721 $ unset PATH
/data2/git/build_fix_8721 $ 0
==21249== Conditional jump or move depends on uninitialised value(s)
==21249== at 0x451371: path_advance (ash.c:2555)
==21249== by 0x456E22: find_command (ash.c:13407)
==21249== by 0x458425: evalcommand (ash.c:10139)
==21249== by 0x454CBC: evaltree (ash.c:9131)
==21249== by 0x456C80: cmdloop (ash.c:13164)
Closes https://bugs.busybox.net/show_bug.cgi?id=8721
v2: On the dash mailing list Harald van Dijk was kind enough to point
out a flaw in my reasoning and provide an alternative patch. Sadly
his patch adds 2 bytes of bloat. Using xzalloc to zero the whole
string gives a bloat of -3 bytes.
function old new delta
setvar 172 169 -3
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The HUSH_TICK configuration option enables command substitution,
not process substitution.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ensure that login_sh is initialised in procargs even when running
an embedded script.
The argc argument to ash_main isn't unused when embedded scripts
are present.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Similar code to unpack embedded data is used to decompress usage
messages, embedded scripts and the config file (in the non-default
bbconfig applet).
Moving this code to a common function reduces the size of the default
build and hides more of the internals of libarchive.
function old new delta
unpack_bz2_data - 135 +135
bb_show_usage 137 157 +20
get_script_content 32 47 +15
unpack_scripts 119 - -119
unpack_usage_messages 124 - -124
------------------------------------------------------------------------------
(add/remove: 1/2 grow/shrink: 2/0 up/down: 170/-243) Total: -73 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
complete_cmd_dir_file 811 826 +15
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
To assist in the deployment of shell scripts it may be convenient
to embed them in the BusyBox binary.
'Embed scripts in the binary' takes any files in the directory
'embed', concatenates them with null separators, compresses them
and embeds them in the binary.
When scripts are embedded in the binary, scripts can be run as
'busybox SCRIPT [ARGS]' or by usual (sym)link mechanism.
embed/nologin is provided as an example.
function old new delta
packed_scripts - 123 +123
unpack_scripts - 87 +87
ash_main 1103 1171 +68
run_applet_and_exit 78 128 +50
get_script_content - 32 +32
script_names - 10 +10
expmeta 663 659 -4
------------------------------------------------------------------------------
(add/remove: 4/0 grow/shrink: 2/1 up/down: 370/-4) Total: 366 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
At worst show_status_line() might be called needlessly when the
user presses ^L/^R, but I don't think we'll get many complaints
about that.
function old new delta
do_cmd 4592 4558 -34
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-34) Total: -34 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since we're comparing the return value to a smallish integer anyway, we
might as well use that bb_strtou() returns UINT_MAX for malformed
input. Referencing errno is kinda bloaty on glibc.
While NSIG is not in POSIX, we do already rely on it being defined,
compile-time const and smallish, since arrays in struct globals_misc are
defined in terms of it.
function old new delta
get_signum 312 286 -26
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When an application documents that it responds such and such to
SIGRTMIN+n, that almost always means with respect to the libc-provided
SIGRTMIN. Hence I disagree with the "more correct" in commit
7b276fc175. In any case, this is rather unfortunate:
36
34
(the first shell is bash). We probably can't change default behaviour
after 7 years, but at least we can provide a config option.
We avoid a little code generation (repeated calls to
__libc_current_sigrtmin) by stashing SIGRTMIN/SIGRTMAX in local
variables, but it does cost ~50 bytes. The next patch serves as penance
for that.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Script uses "ifconfig" only, not up-to-date so much.
This patch adds "ip" in condition if exists.
Signed-off-by: Jiří Prchal <jiri.prchal@aksignal.cz>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add support for MD5 message authentication as described in RFC 5905.
This patch also supports SHA1 authentication.
The key file format is the same file format as used by ntpd.
The configuration file format follows standard Unix conventions
(# comments) with lines consist of the following fields separated by whitespace:
<key identifier, [1,65535]> <SHA1|MD5> <an ASCII string of up to 20 characters|an octet string [a-zA-F0-9] of up to 40 characters>.
https://www.ietf.org/rfc/rfc5905.txt
function old new delta
ntp_init 473 987 +514
hash - 125 +125
recv_and_process_peer_pkt 889 961 +72
packed_usage 33066 33130 +64
ntpd_main 1226 1277 +51
find_key_entry - 29 +29
add_peers 195 207 +12
recv_and_process_client_pkt 509 514 +5
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 6/0 up/down: 872/0) Total: 872 bytes
Signed-off-by: Brandon P. Enochs <enochs.brandon@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Thanks to Cristian Ionescu-Idbohrn for noticing.
Also fix "%d" ' 42' to skip leading whitespace.
function old new delta
print_direc 435 454 +19
bb_strtoll 99 103 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 23/0) Total: 23 bytes
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
The caps were inconsistent: timeout to renew was capped at 20 seconds,
and any renews with timeout <= 60 seconds were forced to broadcast.
function old new delta
udhcpc_main 2683 2680 -3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Exuberant ctags creates an output file called "tags" by default or
"TAGS" when it's run in emacs mode. Add those two files to .gitignore so
they won't be removed by git clean -df.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If a line in mdev.conf starts with "-", parsing will continue even if
a match is found in that line.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Managed to make ntpd on one of my machines to be stuck getting
"root distance too high" all the time, but log is not giving me
more informatin what exactly is happening...
function old new delta
select_and_cluster 1045 1095 +50
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When deleting a directory, the directory should not be removed if the
file in the subdirectory fails to be deleted.
Background information:
When I tested the kernel using LTP (linux-test-project).I found the
mv command have some issue. The LTP test case use the mv command to
move the directory t1 in the cgroup file system to the /tmp directory.
becase files in the cgroup file system are not allowed to be removed.
so the mv reported "Permission denied", but I used the ls command to
view the results and found that the directory t1 had been removed
from the cgroup file system. For the same test case, I used the mv
tool in the GNU coreutils, and the directory t1 will not be removed.
the following testcase use busybox mv:
/ # mount -t cgroup -o cpu cgroup /cpu
/ # cd /cpu
/cpu # mkdir -p t1
/cpu # ls
cgroup.clone_children cpu.cfs_period_us cpu.stat t1
cgroup.procs cpu.cfs_quota_us notify_on_release tasks
cgroup.sane_behavior cpu.shares release_agent
/cpu # mv t1 /tmp
mv: can't remove 't1/cgroup.procs': Operation not permitted
mv: can't remove 't1/cpu.cfs_period_us': Operation not permitted
mv: can't remove 't1/cpu.stat': Operation not permitted
mv: can't remove 't1/cpu.shares': Operation not permitted
mv: can't remove 't1/cpu.cfs_quota_us': Operation not permitted
mv: can't remove 't1/tasks': Operation not permitted
mv: can't remove 't1/notify_on_release': Operation not permitted
mv: can't remove 't1/cgroup.clone_children': Operation not permitted
/cpu # ls
cgroup.clone_children cpu.cfs_period_us cpu.stat cgroup.procs
cpu.cfs_quota_us notify_on_release tasks cgroup.sane_behavior
cpu.shares release_agent
/cpu #
This patch fixed it, don't call rmdir if remove_file return failure,
and under certain file systems, the mv could work normally.
Signed-off-by: Chen Yu <yu.chen3@zte.com.cn>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If fgets() returns incomplete string, we replace NUL with
'\n', and then trim() runs on a non-NUL-terminated buffer.
Prevent that.
While at it, bump buffer from 1k to 2k.
function old new delta
query 519 524 +5
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
- recurse is not acting as expected (looks like broken old code)
- when not using verbose output, return value for retained files is 1,
which is not expected.
Signed-off-by: sagivd <sagivdev@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Some syslog producers provide inconsistent timestamps, so provide an option
to ignore the message timestamps and always locally timestamp. In order to
implement this, invert the valid-timestamp check, but only use the timestamp
if this option is not enabled.
This is in line with what what other syslogd implementations do:
From sysklogd syslogd.c:
* Sun Nov 7 12:28:47 CET 2004: Martin Schulze <joey@infodrom.org>
* Discard any timestamp information found in received syslog
* messages. This will affect local messages sent from a
* different timezone.
rsyslog's imuxsock module similary has an (enabled by default)
IgnoreTimestamp option:
https://www.rsyslog.com/doc/v8-stable/configuration/modules/imuxsock.html
function old new delta
packed_usage 32877 32912 +35
timestamp_and_log 363 376 +13
syslogd_main 1638 1641 +3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 51/0) Total: 51 bytes
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Wed, 28 Mar 2018 18:37:51 +0800
expand: Do not quote backslashes in unquoted parameter expansion
Here is a better example:
a="/*/\nullx" b="/*/\null"; printf "%s\n" $a $b
dash currently prints
/*/\nullx
/*/\null
bash prints
/*/\nullx
/dev/null
You may argue the bash behaviour is inconsistent but it actually
makes sense. What happens is that quote removal only applies to
the original token as seen by the shell. It is never applied to
the result of parameter expansion.
Now you may ask why on earth does the second line say "/dev/null"
instead of "/dev/\null". Well that's because it is not the quote
removal step that removed the backslash, but the pathname expansion.
The fact that the /de\v does not become /dev even though it exists
is just the result of the optimisation to avoid unnecessarily
calling stat(2). I have checked POSIX and I don't see anything
that forbids this behaviour.
So going back to dash yes I think we should adopt the bash behaviour
for pathname expansion and keep the existing case semantics.
This patch does exactly that. Note that this patch does not work
unless you have already applied
https://patchwork.kernel.org/patch/10306507/
because otherwise the optimisation mentioned above does not get
detected correctly and we will end up doing quote removal twice.
This patch also updates expmeta to handle naked backslashes at
the end of the pattern which is now possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
expmeta 618 653 +35
memtodest 146 147 +1
Tested to work with both ASH_INTERNAL_GLOB on and off.
hush does not handle this correctly.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:37 +0800
exec: Return 126 on most errors in shellexec
Currently when shellexec fails on most errors the shell will exit
with exit status 2. This patch changes it to 126 in order to avoid
ambiguities with the exit status from a successful exec.
The errors that result in 127 has also been expanded to include
ENOTDIR, ENAMETOOLONG and ELOOP.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
shellexec 245 254 +9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue, 27 Mar 2018 00:39:35 +0800
eval: Restore input files in evalcommand
When evalcommand invokes a command that modifies parsefile and
then bails out without popping the file, we need to ensure the
input file is restored so that the shell can continue to execute.
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
unwindfiles - 20 +20
evalcommand 1635 1653 +18
getoptscmd 584 595 +11
popallfiles 20 10 -10
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/1 up/down: 49/-10) Total: 39 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue, 3 Apr 2018 00:40:25 +0800
parser: Fix parsing of ${}
dash -c 'echo ${}' should print "Bad subtitution" but instead
fails with "Syntax error: Missing '}'". This is caused by us
reading an extra character beyond the right brace. This patch
fixes it so that this construct only fails during expansion rather
than during parsing.
Fixes: 3df3edd13389 ("[PARSER] Report substition errors at...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
readtoken1 2907 2916 +9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Fri, 23 Mar 2018 18:58:47 +0800
expand: Fix ghost fields with unquoted $@/$*
You're right. The proper fix to this is to ensure that nulonly
is not set in varvalue for $*. It should only be set for $@ when
it's inside double quotes.
In fact there is another bug while we're playing with $@/$*.
When IFS is set to a non-whitespace character such as :, $*
outside quotes won't remove empty fields as it should.
This patch fixes both problems.
Reported-by: Martijn Dekker <martijn@inlv.org>
Suggested-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
argstr 1111 1113 +2
evalvar 571 569 -2
varvalue 579 576 -3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 2/-5) Total: -3 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sat, 19 May 2018 02:39:43 +0800
var: Set IFS to fixed value at start time
This patch forces the IFS variable to always be set to its default
value, regardless of the environment.
It also removes the long unused IFS_BROKEN code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Wed, 4 Apr 2018 17:54:01 +0800
eval: Variable assignments on functions are no longer persistent
Dirk Fieldhouse <fieldhouse@gmx.net> wrote:
> In POSIX.1-2017 ("simultaneously IEEE Std 1003.1™-2017 and The Open
> Group Technical Standard Base Specifications, Issue 7")
> <http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_09>,
> we read under '2.9.1 Simple Commands'
>
> "Variable assignments shall be performed as follows:
> ...
> - If the command name is a standard utility implemented as a function
> (see XBD Utility), the effect of variable assignments shall be as if the
> utility was not implemented as a function.
> ...
> - If the command name is a function that is not a standard utility
> implemented as a function, variable assignments shall affect the current
> execution environment during the execution of the function. It is
> unspecified:
>
> * Whether or not the variable assignments persist after the
> completion of the function
>
> * Whether or not the variables gain the export attribute during
> the execution of the function
>
> * Whether or not export attributes gained as a result of the
> variable assignments persist after the completion of the function (if
> variable assignments persist after the completion of the function)"
POSIX used to require the current dash behaviour. However, you're
right that this is no longer the case.
This patch will remove the persistence of the variable assignment.
I have considered the exporting the variables during the function
execution but have decided against it because:
1) It makes the code bigger.
2) dash has never done this in the past.
3) You cannot use this portably anyway.
Reported-by: Dirk Fieldhouse <fieldhouse@gmx.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
evalcommand 1606 1635 +29
evalcase 313 317 +4
evalfun 280 268 -12
pushlocalvars 48 - -48
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 2/1 up/down: 33/-60) Total: -27 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
On fast network, I've seen "delay:0.002000" shown for all packets,
thus completely losing information on what real delays are.
The new code is careful to not reject packets with tiny delays
if the delay "grows a lot" but is still tiny:
0.000009 is "much larger" than 0.000001 (nine times larger),
but is still very good small delay.
function old new delta
recv_and_process_peer_pkt 863 889 +26
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Implement the -am argument to allow choosing an AUTH method.
For now only PLAIN and LOGIN are supported, but others can be added
easily in the future.
AUTH PLAIN required adding a new variant of encode_base64() capable of
handling NUL characters in the input string; the old function is now a
wrapper for the newer one.
function old new delta
encode_n_base64 - 236 +236
sendmail_main 1199 1380 +181
packed_usage 32873 32877 +4
encode_base64 242 36 -206
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/1 up/down: 421/-206) Total: 215 bytes
Signed-off-by: Raffaello D. Di Napoli <rafdev@dinapo.li>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Symlinks in a subdirectory that is to become target rootfs are sometimes
dangling because they link to canonical file names that are not present
on the host, but are present relative to the target rootfs root. Don't
copy over dangling symlinks when noclobber is enabled
The -e test treats dangling symlinks as non-existent files. Add -h test
that returns true for all symlinks.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Was printing initial "+" prefix for the assignment, that printing
"+ cmd"
then printing the expanded " v=VAL" string.
Delay printing of "+" prefix for the assignment to after expansion.
function old new delta
run_pipe 1883 1902 +19
builtin_eval 127 133 +6
expand_vars_to_list 1103 1106 +3
dump_cmd_in_x_mode 144 142 -2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/1 up/down: 28/-2) Total: 26 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The n > 0 check to prevent access to the last byte of non-existing argv[-1]
wasn't enough. Switched to making sure there are initialized (zero) bytes there.
A predictable testcase is rather hard to construct, unfortunately,
contents of memory depends on allocator behavior and whatnot.
function old new delta
o_save_ptr_helper 119 137 +18
expand_on_ifs 345 339 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-6) Total: 12 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This means we'll start correcting frequency ~5 minutes after start,
not ~3.5 ones.
With previos settings I still often see largish ~0.7s initial offsets
only about 1/2 corrected before frequency correction kicks in,
resulting in ~200ppm "correction" which is then slowly undone.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
= display default is no longer in cylinders
= +sizeC is no longer supported
= add +sizeT suffix - terabytes are here
= K,M,G,T and k,m,g,t suffixes all are binary, not decimal
= +sizeM results in last sector +(size * 1Mbyte - 1), not +(size * 1Mbyte)
= fix comparison to "YES" answer for sgi/sun
function old new delta
read_int 492 519 +27
fdisk_main 2644 2640 -4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 27/-4) Total: 23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This necessitates switch from libc FILE api to a simple
homegrown replacement.
The change which fixes the bug here is the deleting of
restore_redirected_FILEs();
line. It was prematurely moving (restoring) script fd#3.
The fix is: we don't even _want_ to restore scrit fds,
we are perfectly fine with them being moved.
The only reason we tried to restore them is that FILE api
did not allow moving of FILE->fd.
function old new delta
refill_HFILE_and_getc - 93 +93
hfopen - 90 +90
hfclose - 66 +66
pseudo_exec_argv 591 597 +6
hush_main 1089 1095 +6
builtin_source 209 214 +5
save_fd_on_redirect 197 200 +3
setup_redirects 320 321 +1
fgetc_interactive 235 236 +1
i_peek_and_eat_bkslash_nl 99 97 -2
expand_vars_to_list 1103 1100 -3
restore_redirects 99 52 -47
fclose_and_forget 57 - -57
remember_FILE 63 - -63
------------------------------------------------------------------------------
(add/remove: 3/2 grow/shrink: 6/3 up/down: 271/-172) Total: 99 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"Go to:" command was not updating row position, making next "down" movements
for one screenful print empty lines instead of showing the contents.
If the file is whole pages long, "down" movement at EOF was advancing position
+16 bytes, mapping the next portion (entirely past the end of the file),
then finding out that the new position is beyond the EOF, rolling it back
-16 bytes... ending up with this postion pointing *before* the mapped portion.
Any next access (e.g. "move right" key) SEGVs.
function old new delta
hexedit_main 1170 1184 +14
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
o_free() made o_string NULL-initialized,
o_free_unsafe() did not bother reinitializing (expected caller to not need it).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This wasn't an ash bug in dollar_altvalue9, it was hush bug (and bash!)
function old new delta
expand_one_var 2236 2254 +18
expand_vars_to_list 1097 1103 +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 24/0) Total: 24 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
ash might be a bit buggy, need to investigate dollar_altvalue9 test
function old new delta
expand_one_var 1639 2236 +597
expand_variables 112 128 +16
expand_vars_to_list 1117 1097 -20
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 613/-20) Total: 593 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is necessary since expand_one_var() for ${var:+ARG} must create more than one
output word, and thus can't simply return a char*.
function old new delta
expand_one_var 1610 1643 +33
expand_vars_to_list 1139 1125 -14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 33/-14) Total: 19 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Go over the string only once.
function old new delta
encode_then_expand_string 126 105 -21
encode_then_expand_vararg 443 399 -44
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-65) Total: -65 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Pointer e needs to be wound back in order to overwrite '>' with '\0'.
Regression introduced in 20077c1429
Signed-off-by: Raffaello D. Di Napoli <rafdev@dinapo.li>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The "fix fetching of https URLs with http proxy" commit
broke the usual http-to-https redirect:
$ wget http://busybox.net/downloads/busybox-1.29.0.tar.bz2
Connecting to busybox.net (140.211.167.122:80)
Connecting to busybox.net (140.211.167.122:443)
wget: server returned error: HTTP/1.1 400 Bad Request
Fixing...
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The syntax of public key certificates can be found in RFC 5280 section
4.1. The relevant part of the syntax is the following:
TBSCertificate ::= SEQUENCE {
version [0] EXPLICIT Version DEFAULT v1,
serialNumber CertificateSerialNumber,
... remaining fields omitted ...
}
The version field has a default value of v1. RFC 5280 section 4.1.2.1
says the following:
If only basic fields are present, the version SHOULD be 1 (the value
is omitted from the certificate as the default value); however, the
version MAY be 2 or 3.
To help detect if the version field is present or not, the type of the
version field has an explicit tag of [0]. Due to this tag, if the
version field is present, its encoding will have an identifier octet
that is distinct from that of the serialNumber field.
ITU-T X.690 specifies how a value of such a type should be encoded with
DER. There is a PDF of X.690 freely available from ITU-T. X.690 section
8.1.2 specifies the format of identifier octets which is the first
component of every encoded value. Identifier octets encode the tag of a
type. Bits 8 and 7 encode the tag class. Bit 6 will be 0 if the encoding
is primitive and 1 if the encoding is constructed. Bits 5 to 1 encode
the tag number.
X.690 section 8.14 specifies what the identifier octet should be for
explicitly tagged types. Section 8.14.3 says if implicit tagging is not
used, then the encoding shall be constructed. The version field uses
explicit tagging and not implicit tagging, so its encoding will be
constructed. This means bit 6 of the identifier octet should be 1.
X.690 section 8.14 and Annex A provide examples. Note from their
examples that the notation for tags could look like [APPLICATION 2]
where both the tag class and tag number are given. For this example, the
tag class is 1 (application) and the tag number is 2. For notation like
[0] where the tag class is omitted and only the tag number is given, the
tag class will be context-specific.
Putting this all together, the identifier octet for the DER encoding of
the version field should have a tag class of 2 (context-specific), bit 6
as 1 (constructed), and a tag number of 0.
Signed-off-by: Ivan Abrea <ivan@algosolutions.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Update QoS markers.
Use DSCP AF21 for interactive traffic. DSCP is defined in RFC2474.
Many modern equipment no longer support IPTOS.
Signed-off-by: Codarren Velvindron <codarren@hackers.mu>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This reverts "udhcpc: paranoia when using kernel UDP mode
for sending renew: server ID may be bogus".
Users complain that they do have servers behind routers
(with DHCP relays).
function old new delta
send_packet 168 166 -2
bcast_or_ucast 25 23 -2
udhcp_send_kernel_packet 301 295 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-10) Total: -10 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
fdisk from util-linux 2.31 (maybe earlier) does not print this.
function old new delta
check_consistency 449 399 -50
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This is to avoid parsing garbage past packet's actual end.
Also const-ize params to a few functions.
function old new delta
d6_run_script_no_option - 12 +12
option_to_env 791 798 +7
d6_run_script 253 255 +2
perform_d6_release 95 93 -2
udhcpc6_main 2596 2592 -4
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/2 up/down: 21/-6) Total: 15 bytes
Signed-off-by: David Decotigny <ddecotig@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In commit
c4fb8c6a - fsck: do not use statics
not only statics were changed but also a couple of
statics-unrelated changes were made.
This included the handling of the child termination status
as follows:
- if (WIFEXITED(status))
- status = WEXITSTATUS(status);
- else if (WIFSIGNALED(status)) {
+ status = WEXITSTATUS(status);
+ if (WIFSIGNALED(status)) {
This is wrong, should have used a different variable to hold exit code.
Reported by Niklas Hambüchen <mail@nh2.me>.
function old new delta
wait_one 294 282 -12
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add support for the PXELINUX options 209 ("ConfigFile") and 210
("PathPrefix") in the DHCPv6 client.
See also: RFC5071, "Dynamic Host Configuration Protocol Options Used by
PXELINUX".
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add support for 'bootfile-url' and 'bootfile-params' as defined by
RFC5970 "DHCPv6 Options for Network Boot".
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add string_option_to_env() to easily generate environment variables for
known simple options.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
trim() modifies the string in place if needed and returns a pointer to
the end of the resulting string. Update udhcp_str2optset() so it no
longer sets the value of 'val' to the return value of trim().
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
-t, -S and -G each take mandatory integer arguments. getopt32long()'s
option string syntax for this type of argument is 'c:+', however nsenter's
opt_str uses 'c+', which specifies two options 'c' and '+' which do not
take arguments. This means that giving a target PID causes nsenter to
exit and print the usage string:
# nsenter -t1 sh
nsenter: unrecognized option: 1
BusyBox v1.27.2 (2017-12-12 10:41:50 GMT) multi-call binary.
...
The long form options are also broken:
# nsenter --setuid=1000 --setgid=1000 sh
BusyBox v1.29.0.git (2018-05-04 13:56:49 UTC) multi-call binary.
...
`nsenter --target=<pid> sh` parses correctly and appears to work, but
<pid> is ignored and set to 0. This doesn't raise an error unless one
of the namespace arguments is also given:
# ./busybox_unstripped nsenter --target=42 sh
# exit
# ./busybox_unstripped nsenter -n --target=42 sh
BusyBox v1.29.0.git (2018-05-04 13:56:49 UTC) multi-call binary.
...
This has caused problems in a couple of places:
https://github.com/linuxkit/linuxkit/issues/567https://github.com/gliderlabs/docker-alpine/issues/359https://github.com/kontena/pharos-cluster/pull/81
Signed-off-by: Euan Harris <euan.harris@docker.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In nsenter from util-linux, the long version of the -n option is
--net=<path>. BusyBox's version expects --network=<path>, so scripts
and examples written for util-linux's version cause BusyBox's version
to exit with the usage message.
Confusingly, until commit 036585a911, the usage message erroneously
claimed that the long option was indeed called --net; after that commit
long options are not listed at all.
Signed-off-by: Euan Harris <euan.harris@docker.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If server replied with 302 and
Location: ?foo
we used to underflow the allocated space while trying to form the "@foo"
filename. Switch to forming "foo" filename.
function old new delta
packed_usage 32795 32799 +4
parse_url 387 352 -35
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 4/-35) Total: -31 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Testcase: (sleep 10; ls) | busybox less
[...]
~ LICENSE
~ Makefile
~ Makefile.custom
~ Makefile.flags
[...]
less did not want this part:
+ /* dont convert NL to CR+NL on output */
+ newterm->c_oflag &= ~(ONLCR);
function old new delta
get_termios_and_make_raw 108 115 +7
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Usage: nslookup [-type=QUERY_TYPE] [-debug] HOST [DNS_SERVER]
Query DNS about HOST
QUERY_TYPE: soa,ns,a,aaaa,cname,mx,txt,ptr,any
function old new delta
packed_usage 32189 32258 +69
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 952d5a6024 (applets/install: accept more than one install
option) changed the way we handle install options: before that commit, a
missing install type would mean to install nothing; after, we would
iterate over options, so we would never notice there was a mising
option.
Fix that by introducing an explicit --none option to specify to install
nothing.
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Sun, 25 Mar 2018 16:38:00 +0800
expand: Fix buffer overflow in expandmeta
The native version of expandmeta allocates a buffer that may be
overrun for two reasons. First of all the size is 1 byte too small
but this is normally hidden because the minimum size is rounded
up to 2048 bytes. Secondly, if the directory level is deep enough,
any buffer can be overrun.
This patch fixes both problems by calling realloc when necessary.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
expmeta 517 635 +118
expandarg 990 996 +6
mklocal 288 290 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 126/0) Total: 126 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The files generated by the include/config/MARKER target are in the
dependency list for applets/applet_tables.
If applets/applet_tables is created first during applets_dir then it will
be created again later as part of $(busybox-dirs).
As a result include/applet_tables.h is created again. This time while other
build commands may need it.
Let applets_dir depend on include/config/MARKER to avoid this particular
race condition and create the header files atomically to ensure that the
compiler never sees incomplete files.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Thu, 22 Mar 2018 21:41:24 +0800
parser: Allow newlines within parameter substitution
On Fri, Mar 16, 2018 at 11:27:22AM +0800, Herbert Xu wrote:
> On Thu, Mar 15, 2018 at 10:49:15PM +0100, Harald van Dijk wrote:
> >
> > Okay, it can be trivially modified to something that does work in other
> > shells (even if it were actually executed), but gets rejected at parse time
> > by dash:
> >
> > if false; then
> > : ${$+
> > }
> > fi
>
> That's just a bug in dash's parser with ${} in general, because
> it bombs out without the if clause too:
>
> : ${$+
> }
This patch fixes the parsing of newlines with parameter substitution.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since we check for '\' anyway when we determine whether we can look ahead,
we can just check for *and handle* it there.
function old new delta
parse_stream 2751 2740 -11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
newer bash does not drop it, most other shells too
function old new delta
unbackslash 39 57 +18
parse_stream 2753 2751 -2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-2) Total: 16 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Tweak some tests so they work when the path to the test directory or
$HOME contains spaces.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
0.94 came only 2 months after initial 0.90:
0.90 (10 Aug 1997): First public release of lzop
...
0.94 (15 Oct 1997): Header format change
function old new delta
do_lzo_decompress 411 404 -7
f_read8 24 - -24
f_read16 31 - -31
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 0/1 up/down: 0/-62) Total: -62 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Usage: tar c|x|t [-ZzJjahmvokO] [-f TARFILE] [-C DIR] [-T FILE] [-X FILE] [--exclude PATTERN]... [FILE]...
Create, extract, or list files from a tar file
Operation: <============== DELETED
c Create
x Extract
t List
-f FILE Name of TARFILE ('-' for stdin/out)
-C DIR Change to DIR before operation
-v Verbose
-O Extract to stdout
-m Don't restore mtime
-o Don't restore user:group
-k Don't replace existing files
-Z (De)compress using compress
-z (De)compress using gzip
-J (De)compress using xz
-j (De)compress using bzip2
-a (De)compress using lzma
-h Follow symlinks
-T FILE File with names to include
-X FILE File with glob patterns to exclude
--exclude PATTERN Glob pattern to exclude
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Instead, simply don't send this header.
On Mon, Apr 2, 2018 at 8:17 PM, xisd <xisd-dev@riseup.net> wrote:
> I had some trouble using busybox httpd to serve a static website and I
> thought the issue might be of interest.
>
> My problem is related to something that seem quite common for static
> site generator : the use of html files without the '.html' extension
> (it is called 'clean url'...)
>
> Most web server guess that these files are html and display them like
> any other .html files.
>
> From what I understood, the MIME type for files without extension in
> busybox htttp default settings is 'application/octet-stream', and
> because of that 'clean url' pages are not displayed.
>
> It is only trouble because I wanted to deploy my website on freshly
> installed linux without editing any configuration.
>
> The default MIME setting make sense to me as it is, I just thought that
> might be worth mentioning since the use of 'clean url' seem to be a
> common practice for static sites generators (the one I use is callled
> 'yellow' (https://github.com/datenstrom/yellow))
>
> Here is a link for the related issue on github :
> https://github.com/datenstrom/yellow/issues/317
function old new delta
send_headers 702 718 +16
send_headers_and_exit 23 20 -3
handle_incoming_and_exit 2794 2791 -3
send_file_and_exit 772 756 -16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/3 up/down: 16/-22) Total: -6 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
On sorting all kernel/linux/arch/ *.[ch] files,
this reduces memory usage by 6%.
yes | head -99999999 | sort
goes down from 1900Mb to 380 Mb.
function old new delta
sort_main 862 1098 +236
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream email:
parser: Fix parameter expansion inside inner double quotes
The parsing of parameter expansion inside inner double quotes
breaks because we never look for ENDVAR while innerdq is true.
echo "${x#"${x+''}"''}
This patch fixes it by pushing the syntax stack if innerdq is
true and we enter a new parameter expansion.
This patch also fixes a corner case where a bad substitution error
occurs within arithmetic expansion.
Reported-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixes: ab1cecb40478 (" parser: Add syntax stack for recursive...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
readtoken1 2880 2898 +18
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream email:
This is actually composed of two bugs. First of all our tracking
of quotemark is wrong so anything after "$@" becomes quoted. Once
we fix that then the problem is that the first space character
after "$@" is not recognised as an IFS.
This patch fixes both.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 9 Mar 2018 23:07:53 +0800
parser: Fix single-quoted patterns in here-documents
The script
x=*
cat <<- EOF
${x#'*'}
EOF
prints * instead of nothing as it should. The problem is that
when we're in sqsyntax context in a here-document, we won't add
CTLESC as we should. This patch fixes it:
Reported-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This closes 10821.
Upstream patch:
From: Herbert Xu <herbert@gondor.apana.org.au>
Date: Fri, 9 Mar 2018 00:14:02 +0800
parser: Add syntax stack for recursive parsing
Without a stack of syntaxes we cannot correctly these two cases
together:
"${a#'$$'}"
"${a#"${b-'$$'}"}"
A recursive parser also helps in some other corner cases such
as nested arithmetic expansion with paratheses.
This patch adds a syntax stack allocated from the stack using
alloca. As a side-effect this allows us to remove the naked
backslashes for patterns within double-quotes, which means that
EXP_QPAT also has to go.
This patch also fixes removes any backslashes that precede right
braces when they are present within a parameter expansion context,
and backslashes that precede double quotes within inner double
quotes inside a parameter expansion in a here-document context.
The idea of a recursive parser is based on a patch by Harald van
Dijk.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
var_bash3, var_bash4 and var_bash6 tests are updated
with the output given by bash-4.3.43
With this patch, the following tests now pass for ash:
dollar_repl_slash_bash2.tests
squote_in_varexp2.tests
squote_in_varexp.tests
var_bash4.tests
function old new delta
readtoken1 2615 2874 +259
synstack_push - 54 +54
evalvar 574 571 -3
rmescapes 330 310 -20
subevalvar 1279 1258 -21
argstr 1146 1107 -39
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/4 up/down: 313/-83) Total: 230 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This fragment did not work right:
temp = bb_get_chunk_from_file(fp, &len);
if (temp) {
/* len > 0 here, it's ok to do temp[len-1] */
char c = temp[len-1];
With "int len" _sign-extending_, temp[len-1] can refer to a wrong location
if len > 0x7fffffff.
Signed-off-by: Quentin Rameau <quinq@fifth.space>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Thu Mar 15 18:27:30 2018 +0800
parser: Fix backquote support in here-document EOF mark
Currently using backquotes in a here-document EOF mark is broken
because dash tries to do command substitution on it. This patch
fixes it by checking whether we're looking for an EOF mark during
tokenisation.
Reported-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With added fix for quoted-ness of the EOF mark.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Part of upstream commit:
Date: Thu Mar 8 08:37:11 2018 +0100
Author: Harald van Dijk <harald@gigawatt.nl>
parser: use pgetc_eatbnl() in more places
dash has a pgetc_eatbnl function in parser.c which skips any
backslash-newline combinations. It's not used everywhere it could be.
There is also some duplicated backslash-newline handling elsewhere in
parser.c. Replace most of the calls to pgetc() with calls to
pgetc_eatbnl() and remove the duplicated backslash-newline handling.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Not adding "readtoken1(pgetc_eatbnl(), DQSYNTAX..." changes, since
readtoken1() handles the "starts with backslash + newline" case itself.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Upstream commit:
Date: Tue Mar 6 17:40:37 2018 +0000
expand: 'nolog' and 'debug' options cause "$-" to wreak havoc
Op 29-03-17 om 20:02 schreef Martijn Dekker:
> Bug: if either the 'nolog' or the 'debug' option is set, trying to
> expand "$-" silently aborts parsing of an entire argument.
>
> $ dash -o nolog -c 'set -fuC; echo "|$- are the options|"; set +o nolog; echo "|$- are the options|"'
> |
> |uCf are the options|
> $ dash -o debug -c 'set -fuC; echo "|$- are the options|"; set +o debug; echo "|$- are the options|"'
> |
> |uCf are the options|
This turned out to be easy to fix. The routine producing the "$-"
expansion failed to skip options for which there is no option letter,
but only a long-form name. In dash, 'nolog' and 'debug' are currently
the only two such options. Patch below.
- Martijn
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In bbox ash, pipefail is the option which exhibited this.
Signed-off-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Testcase:
set -- a ""; space=" "; printf "<%s>\n" "$@"$space
Before:
<a >
After:
<a>
<>
It usually does not bite since bbox forces -funsigned-char build.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It usually does not bite since bbox forces -funsigned-char build.
But for some reason void linux people disabled that.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
function old new delta
setjobctl 371 367 -4
setinputfile 226 220 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-10) Total: -10 bytes
Based on patch by Mark Marshall <mark.marshall@omicronenergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When using ifplugd on a RNDIS interface with monitor mode, using
SIOCSIFFLAGS seems to fail with EADDRNOTAVAIL. Treat it the same
as if iface disappeared again.
This has been observed on a Tegra TK1 using Linux 4.14. There seem
to be a race when the kernel is creating the device:
ifplugd(usb0): started: BusyBox v1.24.1 (2018-03-27 09:47:48 CEST)
ifplugd(usb0): interface doesn't exist, waiting
ifplugd(usb0): interface appeared
ifplugd(usb0): upping interface
ifplugd(usb0): setting interface flags failed: Cannot assign requested address
<exit>
With this patch ifplugd is successful in upping the device the second
time around:
ifplugd(usb0): upping interface
ifplugd(usb0): using SIOCETHTOOL detection mode
ifplugd(usb0): interface appeared
ifplugd(usb0): upping interface
ifplugd(usb0): setting interface flags failed: Cannot assign requested address
ifplugd(usb0): interface appeared
ifplugd(usb0): upping interface
ifplugd(usb0): using SIOCETHTOOL detection mode
ifplugd(usb0): link is up
ifplugd(usb0): executing '/etc/ifplugd/ifplugd.usb.action usb0 up'
ifplugd up
ifplugd(usb0): exit code: 0
function old new delta
up_iface 120 127 +7
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
For some setups (E.G. for supporting different screen resolutions),
positioning the image somewhere else than the top left corner may be
interesting.
Add support for IMG_LEFT/IMG_TOP settings to specify the image location,
similar to how it is done for the progress bar.
function old new delta
fbsplash_main 994 1038 +44
static.param_names 57 74 +17
packed_usage 32631 32647 +16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 77/0) Total: 77 bytes
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Kernel will surely inform us in FITRIM does not make sense on a given file.
function old new delta
fstrim_main 241 221 -20
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Interface may not exist because it got deleted by an ifdown hook script
earlier. This may happen when a virtual interface, such as VLAN, has multiple
iface blocks defined.
function old new delta
static_down6 14 40 +26
static_down 54 70 +16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 42/0) Total: 42 bytes
Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If we don't ask for numerical output, and the symbolic look-up failed
we used to get "(null)", but the numeric output would be better.
function old new delta
ip_port_str 109 121 +12
Signed-off-by: Mark Marshall <mark.marshall@omicronenergy.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The wrong character was used to indicate options taking an integer
parameter.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
EINTR _should_ only happen on two signals we trap, and safe_poll
_should_ work here just fine, but there were kernel bugs where spurious EINTRs
happen (e.g. on ptrace attach). Be safe.
function old new delta
udhcpd_main 1437 1468 +31
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Fixes:
commit 52a515d187
"udhcp: use poll() instead of select()"
Feb 16 2017
udhcp_sp_read() is meant to check whether signal pipe indeed has some data to read.
In the above commit, it was changed as follows:
- if (!FD_ISSET(signal_pipe.rd, rfds))
+ if (!pfds[0].revents)
return 0;
The problem is, the check was working for select() purely by accident.
Caught signal interrupts select()/poll() syscalls, they return with EINTR
(regardless of SA_RESTART flag in sigaction). _Then_ signal handler is invoked.
IOW: they can't see any changes to fd state caused by signal haldler
(in our case, signal handler makes signal pipe ready to be read).
For select(), it means that rfds[] bit array is unmodified, bit of signal
pipe's read fd is still set, and the above check "works": it thinks select()
says there is data to read.
This accident does not work for poll(): .revents stays clear, and we do not
try reading signal pipe as we should. In udhcpd, we fall through and block
in socket read. Further SIGTERM signals simply cause socket read to be
interrupted and then restarted (since SIGTERM handler has SA_RESTART=1).
Fixing this as follows: remove the check altogether. Set signal pipe read fd
to nonblocking mode. Always read it in udhcp_sp_read().
If read fails, assume it's EAGAIN and return 0 ("no signal seen").
udhcpd avoids reading signal pipe on every recvd packet by looping if EINTR
(using safe_poll()) - thus ensuring we have correct .revents for all fds -
and calling udhcp_sp_read() only if pfds[0].revents!=0.
udhcpc performs much fewer reads (typically it sleeps >99.999% of the time),
there is no need to optimize it: can call udhcp_sp_read() after each poll
unconditionally.
To robustify socket reads, unconditionally set pfds[1].revents=0
in udhcp_sp_fd_set() (which is before poll), and check it before reading
network socket in udhcpd.
TODO:
This might still fail: if pfds[1].revents=POLLIN, socket read may still block.
There are rare cases when select/poll indicates that data can be read,
but then actual read still blocks (one such case is UDP packets with
wrong checksum). General advise is, if you use a poll/select loop,
keep all your fds nonblocking.
Maybe we should also do that to our network sockets?
function old new delta
udhcp_sp_setup 55 65 +10
udhcp_sp_fd_set 54 60 +6
udhcp_sp_read 46 36 -10
udhcpd_main 1451 1437 -14
udhcpc_main 2723 2708 -15
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/3 up/down: 16/-39) Total: -23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When fetching a https:// URL with HTTP proxy configured
(e.g. with environment variable http_proxy=http://your-proxy:3128)
busybox was making a https connection to the proxy.
This was because the protocol scheme for the target URL was used to determine whether to connect to the proxy over SSL or not.
When the proxy is in use, the decision on whether to connect to the proxy over https
should based on the proxy URL not on the target URL.
function old new delta
wget_main 2381 2387 +6
Signed-off-by: Peter Lloyd <l-busybox@pgl22.co.uk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Move some distro specific include files into the appropriate #ifdef
blocks to make the code more portable.
Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It turns out bkslash_in_varexp.tests was a bash bug :]
ash and hush fail "corrected" bkslash_in_varexp.tests as well,
just not as badly as I thought (hush gets half of the cases right).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Trying to install busybox with hardlinks and a custom PREFIX will fail
for applets not in the /bin directory, because relative pathnames are
used. applets/install.sh is *supposed to* use the absolute pathname
for hardlinks but it fails to do so because the wrong check is used
in the if statement.
While fixing it, shore up other sloppy coding in applets/install.sh
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This also makes OPT_STR reused:
text data bss dec hex filename
930979 481 6852 938312 e5148 busybox_old
930954 481 6852 938287 e512f busybox_unstripped
^^^^^^
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Attaching an interface to a VRF is done by setting the interface's
master. Besides VRF, this can also be used for bridges.
function old new delta
set_master - 142 +142
do_iplink 1262 1357 +95
packed_usage 32546 32539 -7
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/1 up/down: 237/-7) Total: 230 bytes
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
VRF interfaces have a mandatory table parameter, which needs to be
specified using a RTNL attribute.
function old new delta
do_add_or_delete 1150 1254 +104
packed_usage 32444 32546 +102
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 206/0) Total: 206 bytes
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
While at it, add -t to --help, and fix comments which say that -t is ignored
function old new delta
packed_usage 32427 32444 +17
umount_main 558 552 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 17/-6) Total: 11 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This mostly reverts commit bc9bbeb2b8
"libarchive: do not extract unsafe symlinks unless $EXTRACT_UNSAFE_SYMLINKS=1"
Users report that it is somewhat too restrictive. See
https://bugs.busybox.net/show_bug.cgi?id=8411
In particular, this interferes with unpacking of busybox-based
filesystems with links like "sbin/applet" -> "../bin/busybox".
The change is made smaller by deleting ARCHIVE_EXTRACT_QUIET flag -
it is unused since 2010, and removing conditionals on it
allows commonalizing some error message codes.
function old new delta
create_or_remember_symlink - 94 +94
create_symlinks_from_list - 64 +64
tar_main 1002 1006 +4
unzip_main 2732 2724 -8
data_extract_all 984 891 -93
unsafe_symlink_target 147 - -147
------------------------------------------------------------------------------
(add/remove: 2/1 grow/shrink: 1/2 up/down: 162/-248) Total: -86 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Test scripts that use CONFIG_* variables need to source .config.
Since this wasn't being done for busybox many tests were skipped.
As a result new failures due to changes in help output were missed.
Also remove some unnecessary echos in the bzcat script.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
the patch getopt32: remove opt_complementary 22542eca18
introduced a regressed in the cp command since it removed all aliases of arguments
if long_opts is not configured.
Patch by Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This way, we can zero them all in one go.
We do malloc() anyway, thus nothing is lost by mallocing "globals"
function old new delta
arping_main 1683 1686 +3
finish 100 86 -14
catcher 350 310 -40
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 3/-54) Total: -51 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
ARPING 192.168.1.1 from 192.168.1.172 wlan0
Unicast reply from 192.168.1.1 [F4:F2:6D:52:A8:DE] 1.672ms
Sent 1 probes (1 broadcast(s))
Received 1 response(s)
ARPING 192.168.1.1 from 192.168.1.172 wlan0
Unicast reply from 192.168.1.1 [f4:f2:6d:52:a8:de] 1.152ms
Sent 1 probe(s) (1 broadcast(s))
Received 1 response(s) (0 request(s), 0 broadcast(s))
function old new delta
finish 120 100 -20
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Do not clear extra bits on option_mask32, it's not necessary.
Move DAD bit to 2, this makes exit logic simpler.
function old new delta
arping_main 1655 1629 -26
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I don't have an example of mishandled script, but the logic looked wrong:
it could sometimes treat newlines as if they are spaces.
function old new delta
parse_stream 2788 2787 -1
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This makes size display 5-char wide instead of 6-char, but now it's smarter
(can show sizes in "12.3M" format).
function old new delta
bb_progress_update 654 622 -32
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since bb_info_msg() was eliminated type of buffering on stdout is not important
function old new delta
udhcpd_main 1463 1451 -12
udhcpc_main 2735 2723 -12
setlinebuf 19 - -19
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 0/2 up/down: 0/-43) Total: -43 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
gc-6.1.1 x86_64:
function old new delta
generateMTFValues 380 367 -13
gcc-4.3.1 386:
function old new delta
inner_loop - 41 +41
generateMTFValues 357 294 -63
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 41/-63) Total: -22 bytes
gcc-6.3.0 386:
function old new delta
inner_loop - 36 +36
generateMTFValues 363 250 -113
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 36/-113) Total: -77 bytes
The last case, gcc-6.3.0, runs almost 3 times faster after this change.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Corresponding changelog from gzip-1.3.12 reads:
"""
2006-12-20 Paul Eggert <eggert@cs.ucla.edu>
* inflate.c (huft_build): Fix regression that caused gzip to
refuse to uncompress null input (all zero length codes). Problem
reported by Yiorgos Adamopoulos. This regression was caused by
the security patch installed 2006-11-20, which in turn came from
Debian, which in turn apparently came from Thomas Biege of SuSe.
"""
function old new delta
huft_build 1176 1216 +40
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Generic ints/unsigneds are usually fine. Yes, really.
function old new delta
sendMTFValues 2100 2093 -7
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Implement "cp -T". Some Linux kernel Makefiles started using this recently,
so allow also building on systems using busybox cp.
function old new delta
cp_main 360 428 +68
copy_file 1678 1676 -2
packed_usage 32290 32259 -31
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 76/-39) Total: 35 bytes
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Use one memset to clear part of G1, and all of G2.
function old new delta
pack_gzip 838 828 -10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Replace one RMW op with store. This speeds up gzip of a png file by ~2%.
function old new delta
send_bits 62 66 +4
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Adds a fullblock iflag for improved compatibility with GNU dd.
The new iflag can be used to ensure that dd calls retrieve the
expected amount of data when reading from pipes or unusual
filesystems.
function old new delta
packed_usage 32249 32334 +85
dd_main 1582 1632 +50
static.iflag_words 12 22 +10
------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 145/0) Total: 145 bytes
Signed-off-by: Nicholas Clark <nicholas.clark@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This implements support for the command_not_found_handle hook function, which is
useful for allowing package managers to suggest packages which could provide the
command.
Unlike bash, however, we ignore exit codes from the hook function and always return
the correct POSIX error code (EX_NOTFOUND).
function old new delta
find_command 911 990 +79
Signed-off-by: William Pitcock <nenolod@dereferenced.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add support for LittleFS to blkid. Not included if FEATURE_BLKID_TYPE
is not selected (neither UUID nor label).
LittleFS is a small fail-safe filesystem designed for embedded
systems. It has strong copy-on-write guarantees and storage on disk
is always kept in a valid state. It also provides a form of dynamic
wear levelling for systems that can not fit a full flash translation
layer. (https://github.com/geky/littlefs)
ARM has introduced it in its Mbed OS 5.7, so it starts to gain focus.
(https://os.mbed.com/blog/entry/littlefs-high-integrity-embedded-fs/)
function old new delta
volume_id_probe_lfs - 62 +62
fs1 20 24 +4
Signed-off-by: Sven-Göran Bergh <sgb@systemaxion.se>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Before this patch, "${v:2:0x100000001}" = "${v:2:1}",
and similarly, constructs like "${v:2:9999999999}" may give wrong result
due to int overflows.
function old new delta
substr_atoi - 43 +43
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
$ busybox dd if=/dev/zero of=/dev/loop0 bs=100M count=8; echo $?
8+0 records in
7+0 records out <=========== FIXED, was 7+1
805220352 bytes (767.9MB) copied, 0.464010 seconds, 1.6GB/s
1
function old new delta
write_and_stats 97 99 +2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently, it is impossible to pass more than one option to the isntall
script, so it totally prevents using --noclobber.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Simplify the handling of --noclobber so that it applies to all types of
installation types, even to script wrappers.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
@@ -234,7 +238,7 @@ int install_main(int argc, char **argv)
args[2]=dest;
args[3]=NULL;
if(spawn_and_wait(args)){
bb_perror_msg("strip");
bb_simple_perror_msg("strip");
ret=EXIT_FAILURE;
}
}
Loaded 100 of 1153 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.