dash has accepted a patch to remove the first argument of findvar().
It's commit e85e972 (var: move hashvar() calls into findvar()).
Apply the same change to BusyBox ash.
function old new delta
findvar 35 40 +5
mklocal 268 261 -7
exportcmd 164 157 -7
setvareq 319 310 -9
lookupvar 150 141 -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/4 up/down: 5/-32) Total: -27 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The 'timeout' applet uses parse_duration_str() to obtain its
timeout values. The default configuration enables float durations.
However, the applet silently ignores fractional seconds. This
results in unexpected behaviour:
$ timeout 5.99 sleep 5.1; echo $?
Terminated
143
When float durations are enabled ensure that any fractional seconds
are taken into account.
function old new delta
timeout_wait 44 92 +48
timeout_main 383 365 -18
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 48/-18) Total: 30 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
"echo text >&0000000000002" works as you would expect,
"echo text >&9999999999" properly fails instead of creating a file
named "9999999999".
function old new delta
expredir 219 232 +13
readtoken1 3045 3053 +8
parsefname 204 201 -3
isdigit_str9 45 - -45
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 2/1 up/down: 21/-48) Total: -27 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
With very large fd#, the error code path is different
from one for closed but small fd#.
Make it not abort if we are interactive:
$ echo text >&99 # this wasn't buggy
ash: dup2(9,1): Bad file descriptor
$ echo text >&9999 # this was
ash: fcntl(1,F_DUPFD,10000): Invalid argument
function old new delta
.rodata 105637 105661 +24
dup2_or_raise 35 38 +3
redirect 1084 1044 -40
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 27/-40) Total: -13 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The check for result hash size was buggy for CONFIG_SHA1_HWACCEL=y.
While at it, document CPUID use a bit better.
function old new delta
get_shaNI - 28 +28
sha1_end 66 79 +13
sha256_begin 83 60 -23
sha1_begin 111 88 -23
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/2 up/down: 41/-46) Total: -5 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
gcc is being rather silly. Usues suboptimal registers,
and does not realize that i and j are never negative,
thus usese even _more_ registers for temporaries
to sign-extend i/j to 64-bit offsets.
function old new delta
sp_256_mont_mul_8 155 132 -23
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
gcc does not necessarily clear upper bits in
64-bit regs if you ask it to load a 32-bit constant.
Cast it to unsigned long. Better yet, hand-write loading
of the constant with a smaller instruction.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The coreutils versions of md5sum and the like accept uppercase hex
strings from checksum files specified with the '-c' option.
Use a case-insensitive comparison so BusyBox does the same.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Currently vi assumes that the edit buffer ends in a newline. This may
not be the case. For example:
$ printf test > test
$ vi test
<press 'o'>
We fix this by inserting a newline to the end during initialization.
Signed-off-by: Petja Patjas <pp01415943@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 549deab5a (ash: move parse-time quote flag detection to
run-time) did away with the need to distinguish between backquotes
inside and outside quotes. This left a gap among the control
characters used in argument strings. Removing this gap saves a
few bytes.
function old new delta
.rodata 167346 167338 -8
cmdputs 399 388 -11
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-19) Total: -19 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Extend the changes introduced by commit b4ef2e3467 (Makefile.flags:
suppress some clang-9 warnings) so they also cover the case where
clang is used as a cross-compiler.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
An alias expansion immediately followed by '<' and a newline is
parsed incorrectly:
~ $ alias x='echo yo'
~ $ x<
yo
~ $
sh: syntax error: unexpected newline
The echo is executed and an error is printed on the next command
submission. In dash the echo isn't executed and the error is
reported immediately:
$ alias x='echo yo'
$ x<
dash: 3: Syntax error: newline unexpected
$
The difference between BusyBox and dash is that BusyBox supports
bash-style process substitution and output redirection. These
require checking for '<(', '>(' and '&>' in readtoken1().
In the case above, when the end of the alias is found, the '<' and
the following newline are both read to check for '<('. Since
there's no match both characters are pushed back.
The next input is obtained by reading the expansion of the alias.
Once this string is exhausted the next call to __pgetc() calls
preadbuffer() which pops the string, reverts to the previous input
and recursively calls __pgetc(). This request is satisified from
the pungetc buffer. But the first __pgetc() doesn't know this:
it sees the character has come from preadbuffer() so it (incorrectly)
updates the pungetc buffer.
Resolve the issue by moving the code to pop the string and fetch
the next character up from preadbuffer() into __pgetc().
function old new delta
pgetc 28 589 +561
__pgetc 607 - -607
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/0 up/down: 561/-607) Total: -46 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Something is fishy with constrcts like "3==v=3" in gawk,
they should not work, but do. Ignore those for now.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
HTTP headers are case insensitive and therefore the check if a default
header has been overwritten needs to be case insensitive.
Without this patch `--header 'user-agent: test'` results in
`User-Agent: Wget` and `user-agent: test` being send.
function old new delta
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0) Total: 0 bytes
text data bss dec hex filename
1040876 16443 1840 1059159 102957 busybox_old
1040876 16443 1840 1059159 102957 busybox_unstripped
Signed-off-by: Sertonix <sertonix@posteo.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Although "naive" counting function is not too slow and is smaller,
using it on e.g. each of 1024 words of CPU mask feels wrong.
function old new delta
bb_popcnt_32 - 52 +52
get_prefix 323 321 -2
nproc_main 206 199 -7
d4_run_script 739 731 -8
ipcalc_main 533 507 -26
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 0/4 up/down: 52/-43) Total: 9 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In the function find_export_symbols, since the fopen file does not
exit when it fails, there is a dereference problem in fclose(fp),
which will cause a segmentation fault.
Signed-off-by: Yan Zhu <zhuyan2015@foxmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
A 32-bit build of BusyBox using clang segfaulted in the test
"awk assign while assign". Specifically, on line 7 of the test
input where the adjustment of the L.v pointer when the Fields
array was reallocated
L.v += Fields - old_Fields_ptr;
was out by 4 bytes.
Rearrange to code so both gcc and clang generate code that works.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
log5() with crondlog(5, msg, va) seems making logging more consistent.
function old new delta
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0) Total: 0 bytes
Signed-off-by: Jones Syue <jonessyue@qnap.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
I developed this application to test the Linux kernel series [1]. As
described in it I could not use the iproute2 package since the
microcontroller is without MMU.
function old new delta
do_set_can - 920 +920
packed_usage 34645 34908 +263
get_float_1000 - 164 +164
.rodata 105427 105539 +112
do_iplink 1313 1381 +68
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 3/0 up/down: 1527/0) Total: 1527 bytes
cc: Marc Kleine-Budde <mkl@pengutronix.de>
[1] https://marc.info/?l=linux-netdev&m=167999323611710&w=2
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
sed would currently not error if write failed when modifying a file.
This can be reproduced with the following 'script':
$ sudo mount -t tmpfs tmpfs -o size=1M /tmp/m
$ sudo chmod 777 /tmp/m
$ echo foo > /tmp/m/foo
$ dd if=/dev/zero of=/tmp/m/fill bs=4k
dd: error writing '/tmp/m/fill': No space left on device
256+0 records in
255+0 records out
1044480 bytes (1.0 MB, 1020 KiB) copied, 0.00234567 s, 445 MB/s
$ busybox sed -i -e 's/.*/bar/' /tmp/m/foo
$ echo $?
0
$ cat /tmp/m/foo
<empty>
new behaviour:
$ echo foo > /tmp/m/foo
$ ./busybox sed -i -e 's/.*/bar/' /tmp/m/foo
sed: write error
$ echo $?
4
$ cat /tmp/m/foo
foo
function old new delta
sed_main 754 801 +47
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 47/0) Total: 47 bytes
text data bss dec hex filename
75727 2510 1552 79789 137ad busybox_old
75774 2510 1552 79836 137dc busybox_unstripped
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The ru_maxrss is already in Kbytes and not pages.
function old new delta
ptok 21 - -21
time_main 1261 1217 -44
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-65) Total: -65 bytes
fixes: https://bugs.busybox.net/show_bug.cgi?id=15751
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Patch by M Rubon <rubonmtz@gmail.com>:
Busybox awk handles references to empty (not provided in the input)
fields differently during the first line of input, as compared to
subsequent lines.
$ (echo a ; echo b) | awk '$2 != 0' #wrong
b
No field $2 value is provided in the input. When awk references field
$2 for the "a" line, it is seen to have a different behaviour than
when it is referenced for the "b" line.
Problem in BusyBox v1.36.1 embedded in OpenWrt 23.05.0
Same problem also in 21.02 versions of OpenWrt
Same problem in BusyBox v1.37.0.git
I get the correct expected output from Ubuntu gawk and Debian mawk,
and from my fix.
will@dev:~$ (echo a ; echo b) | awk '$2 != 0' #correct
a
b
will@dev:~/busybox$ (echo a ; echo b ) | ./busybox awk '$2 != 0' #fixed
a
b
I built and poked into the source code at editors/awk.c The function
fsrealloc(int size) is core to allocating, initializing, reallocating,
and reinitializing fields, both real input line fields and imaginary
fields that the script references but do not exist in the input.
When fsrealloc() needs more field space than it has previously
allocated, it initializes those new fields differently than how they
are later reinitialized for the next input line. This works fine for
fields defined in the input, like $1, but does not work the first time
when there is no input for that field (e.g. field $99)
My one-line fix simply makes the initialization and clrvar()
reinitialization use the same value for .type. I am not sure if there
are regression tests to run, but I have not done those.
I'm not sure if I understand why clrvar() is not setting .type to a
default constant value, but in any case I have left that untouched.
function old new delta
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/0 up/down: 0/0) Total: 0 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Just listing the vendor/product IDs is not always very helpful, so add logic
to print the manufacturer and product strings similar to the "big" usbutils
versions.
Not all devices provide sensible strings though. The usbutils version works
around this by falling back to looking up the vendor/product IDs in the hwdb
and using those strings instead, which is not an option here - Instead
simply trim() the strings for readability.
lsusb | sort
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:5539 Realtek Semiconductor Corp. Integrated_Webcam_HD
Bus 001 Device 003: ID 0a5c:5842 Broadcom Corp. 58200
Bus 001 Device 030: ID 8087:0aaa Intel Corp. Bluetooth 9460/9560 Jefferson Peak (JfP)
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 002: ID 0bda:5487 Realtek Semiconductor Corp. Dell dock
Bus 006 Device 003: ID 0bda:5413 Realtek Semiconductor Corp. Dell dock
Bus 006 Device 004: ID 413c:b06e Dell Computer Corp. Dell dock
Bus 006 Device 005: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 006 Device 006: ID 0bda:402e Realtek Semiconductor Corp. USB Audio
Bus 006 Device 007: ID 413c:1010 Dell Computer Corp. USB 2.0 Hub [MTT]
Bus 006 Device 008: ID 413c:b06f Dell Computer Corp. Dell dock
Bus 006 Device 009: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 006 Device 010: ID 413c:2110 Dell Computer Corp. Dell Wired Multimedia Keyboard
Bus 006 Device 011: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 006 Device 012: ID 0451:3410 Texas Instruments, Inc. TUSB3410 Microcontroller
Bus 007 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 002: ID 0bda:0487 Realtek Semiconductor Corp. Dell dock
Bus 007 Device 003: ID 0bda:0413 Realtek Semiconductor Corp. Dell dock
Bus 007 Device 004: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
./busybox lsusb | sort
Bus 001 Device 001: ID 1d6b:0002 Linux 6.1.0-13-amd64 xhci-hcd xHCI Host Controller
Bus 001 Device 002: ID 0bda:5539 CNFHH53Q0324300ACA10 Integrated_Webcam_HD
Bus 001 Device 003: ID 0a5c:5842 Broadcom Corp 58200
Bus 001 Device 030: ID 8087:0aaa
Bus 002 Device 001: ID 1d6b:0003 Linux 6.1.0-13-amd64 xhci-hcd xHCI Host Controller
Bus 003 Device 001: ID 1d6b:0002 Linux 6.1.0-13-amd64 xhci-hcd xHCI Host Controller
Bus 004 Device 001: ID 1d6b:0003 Linux 6.1.0-13-amd64 xhci-hcd xHCI Host Controller
Bus 005 Device 001: ID 1d6b:0002 Linux 6.1.0-13-amd64 dummy_hcd Dummy host controller
Bus 006 Device 001: ID 1d6b:0002 Linux 6.1.0-13-amd64 xhci-hcd xHCI Host Controller
Bus 006 Device 002: ID 0bda:5487 Dell Inc. Dell dock
Bus 006 Device 003: ID 0bda:5413 Dell Inc. Dell dock
Bus 006 Device 004: ID 413c:b06e Dell dock
Bus 006 Device 005: ID 0451:8142
Bus 006 Device 006: ID 0bda:402e Generic USB Audio
Bus 006 Device 007: ID 413c:1010 USB 2.0 Hub [MTT]
Bus 006 Device 008: ID 413c:b06f Dell dock
Bus 006 Device 009: ID 046d:c016 Logitech Optical USB Mouse
Bus 006 Device 010: ID 413c:2110 Dell Dell Wired Multimedia Keyboard
Bus 006 Device 011: ID 0451:8142
Bus 006 Device 012: ID 0451:3410 Texas Instruments TUSB3410 Boot Device
Bus 007 Device 001: ID 1d6b:0003 Linux 6.1.0-13-amd64 xhci-hcd xHCI Host Controller
Bus 007 Device 002: ID 0bda:0487 Dell Inc. Dell dock
Bus 007 Device 003: ID 0bda:0413 Dell Inc. Dell dock
Bus 007 Device 004: ID 0bda:8153 Realtek USB 10/100/1000 LAN
./scripts/bloat-o-meter busybox_unstripped{_orig,}
function old new delta
trim - 101 +101
fileAction 338 431 +93
add_sysfs_prop - 70 +70
open_read_close - 54 +54
read_close - 35 +35
.rodata 3268 3294 +26
------------------------------------------------------------------------------
(add/remove: 5/0 grow/shrink: 2/0 up/down: 379/0) Total: 379 bytes
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
4c20d9f2b removed FEATURE_FLOAT_SLEEP option, thus since then there are
only two variants.
Fixes: 4c20d9f2b ("extend fractional duration support to "top -d N.N" and "timeout"")
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Add option to change the running directory before starting the process.
This can be done using -d or --chdir options. Add also test cases to
start-stop-daemon to test out the directory change option.
function old new delta
packed_usage 34602 34648 +46
start_stop_daemon_main 1107 1130 +23
start_stop_daemon_longopts 156 164 +8
.rodata 105382 105384 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 79/0) Total: 79 bytes
Signed-off-by: ejaaskel <esa.jaaskela@suomi24.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
I noticed a commit in connman:
"gdhcp: Avoid leaking stack data via unitiialized variable" [1]
Since gdhcp is just BusyBox udhcp with the serial numbers filed off, I
checked if BusyBox udhcp has a related issue.
The issue is that the get_option logic assumes any data within the
memory area of the buffer is "valid". This reduces the complexity of the
function at the cost of reading past the end of the actually received
data in the case of specially crafted packets. This is not a problem
for the udhcp_recv_kernel_packet data path as the entire memory
area is zeroed. However, d4/d6_recv_raw_packet does not zero the
memory.
Note that a related commit [2] is not required as we are zeroing
any data that can be read by the get_option function.
[1] https://git.kernel.org/pub/scm/network/connman/connman.git/commit/?id=a74524b3e3fad81b0fd1084ffdf9f2ea469cd9b1
[2] https://git.kernel.org/pub/scm/network/connman/connman.git/commit/?id=58d397ba74873384aee449690a9070bacd5676fa
function old new delta
d4_recv_raw_packet 484 497 +13
d6_recv_raw_packet 216 228 +12
.rodata 105390 105381 -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 25/-9) Total: 16 bytes
Signed-off-by: Russ Dill <russ.dill@gmail.com>
Cc: Colin Wee <cwee@tesla.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since Linux 2.2.13, chown(2) resets the suid/gid bits for all users.
This patch changes the ordering so that chmod gets called after chown.
This behavior follows GNU coreutils.
Signed-off-by: Nero <nero@w1r3.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When the input data contained a cycle it was possible for tsort to
attempt to access freed nodes. This sometimes resulted in the
test case 'echo a b b a | tsort' crashing.
Don't free nodes when they're removed from the graph.
function old new delta
tsort_main 621 596 -25
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-25) Total: -25 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When I planned to print the command in read_line_input, I found that after
the system started, the command printed for the first time was always
garbled.
After analysis, it is found that in the init() function of ash, the
variable basepf.buf is not initialized after applying for memory, resulting
in garbled initial data. Then assign it to the global variable
g_parsefile->buf in ash.c, and then pass g_parsefile->buf to the parameter
command of the function read_line_input in the function preadfd(), and
finally cause it to be garbled when the command is printed by
read_line_input.
The call stack is as follows:
#0 read_line_input (st=0xb6fff220, prompt=0xb6ffc910 "\\[\\033[32m\\]\\h \\w\\[\\033[m\\] \\$ ", command=command@entry=0xb6ffc230 "P\325\377\266P\325\377\266", maxsize=maxsize@entry=1024) at libbb/lineedit.c:2461
#1 0x0043ef8c in preadfd () at shell/ash.c:10812
#2 preadbuffer () at shell/ash.c:10914
#3 pgetc () at shell/ash.c:10997
#4 0x00440c20 in pgetc_eatbnl () at shell/ash.c:11039
#5 0x00440cbc in xxreadtoken () at shell/ash.c:13157
#6 0x00440f40 in readtoken () at shell/ash.c:13268
#7 0x00441234 in list (nlflag=nlflag@entry=1) at shell/ash.c:11782
#8 0x004420e8 in parsecmd (interact=<optimized out>) at shell/ash.c:13344
#9 0x00442c34 in cmdloop (top=top@entry=1) at shell/ash.c:13549
#10 0x00444e4c in ash_main (argc=<optimized out>, argv=0x444e4c <ash_main+1328>) at shell/ash.c:14747
#11 0x00407954 in run_applet_no_and_exit (applet_no=9, name=<optimized out>, argv=0xbefffd34) at libbb/appletlib.c:1024
#12 0x00407b68 in run_applet_and_exit (name=0xbefffe56 "ash", argv=0x9) at libbb/appletlib.c:1047
#13 0x00407f88 in main (argc=<optimized out>, argv=0xbefffd34) at libbb/appletlib.c:1181
Fixes: 82dd14a510 ("ash: use CONFIG_FEATURE_EDITING_MAX_LEN")
Signed-off-by: zhuyan <zhuyan34@huawei.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In kernel 5.16 special ioctls were introduced to get/set RTC parameters.
Add option to get/set parameters into busybox version of hwclock.
Implementation is similar to the one already used in linux-utils hwclock
tool.
Example of parameter get use:
$ hwclock -g 2
The RTC parameter 0x2 is set to 0x2.
$ hwclock --param-get bsm
The RTC parameter 0x2 is set to 0x2.
Example of parameter set use:
$ hwclock -p 2=1
The RTC parameter 0x2 will be set to 0x1.
$ hwclock -p bsm=2
The RTC parameter 0x2 will be set to 0x2.
function old new delta
hwclock_main 298 576 +278
.rodata 105231 105400 +169
packed_usage 34541 34576 +35
static.hwclock_longopts 60 84 +24
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 506/0) Total: 506 bytes
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Has a few annoying problems:
* sleepcmd() -> sleep_main(), the parsing of bad arguments exits the shell.
* sleep_for_duration() in sleep_main() has to be interruptible for
^C traps to work, which may be a problem for other users
of sleep_for_duration().
* BUT, if sleep_for_duration() is interruptible, then SIGCHLD interrupts it
as well (try "/bin/sleep 1 & sleep 10").
* sleep_main() must not allocate anything as ^C in ash longjmp's.
(currently, allocations are only on error paths, in message printing).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We risk exhaust stack with alloca() with old code.
function old new delta
arith_apply 990 1023 +33
evaluate_string 1467 1494 +27
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 60/0) Total: 60 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The "hack" to virtually parenthesize ? EXPR : made this unnecessary.
The expression is effectively a?(b?(c):d):e and thus b?c:d is evaluated
before continuing with the second :
function old new delta
evaluate_string 1148 1132 -16
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This fixes arith-precedence1.tests.
This breaks arith-ternary2.tests again (we now evaluate variables
on not-taken branches). We need a better logic here anyway:
not only bare variables should not evaluate when not-taken:
1 ? eval_me : do_not_eval
but any (arbitrarily complex) expressions shouldn't
evaluate as well!
1 ? var_is_set=1 : ((var_is_not_set=2,var2*=4))
function old new delta
evaluate_string 1097 1148 +51
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Skip one pass through token table, since we know the result.
function old new delta
evaluate_string 1095 1097 +2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
from Adam Goldman <adamg@pobox.com>
This patch makes udhcpd respond correctly to queries from BOOTP clients.
It contains the following changes:
The end field, or DHCP_END option, is required in DHCP requests but
optional in BOOTP requests. However, we still send an end
field in all replies, because some BOOTP clients expect one in replies
even if they didn't send one in the request.
Requests without a DHCP_MESSAGE_TYPE are recognized as BOOTP requests
and handled appropriately, instead of being discarded. We still require
an RFC 1048 options field, but we allow it to be empty.
Since a BOOTP client will keep using the assigned IP forever, we only
send a BOOTP reply if a static lease exists for that client.
BOOTP replies shouldn't contain DHCP_* options, so we omit them if there
was no DHCP_MESSAGE_TYPE in the request. Options other than DHCP_*
options are still sent.
The options field of a BOOTP reply must be exactly 64 bytes. If we
construct a reply with more than 64 bytes of options, we give up and log
an error instead of sending it. udhcp_send_raw_packet already pads the
options field to 64 bytes if it is too short.
This implementation has been tested against an HP PA-RISC client.
function old new delta
.rodata 105247 105321 +74
udhcpd_main 1520 1591 +71
send_offer 419 470 +51
init_packet 81 97 +16
udhcp_init_header 75 88 +13
udhcp_scan_options 192 203 +11
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 6/0 up/down: 236/0) Total: 236 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since we take its address, the variable lives on stack (not a GPR).
Thus, nothing is improved by caching it.
function old new delta
awk_getline 642 639 -3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
* Added tests for od (non-DESKTOP little-endian)
* Allow 'optional' to invert meaning of a config option with '!'
Signed-off-by: David Leonard <d+busybox@adaptive-enterprises.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit daa66ed6 fixed a number of use-after-free bugs in bash pattern
substitution, however one "unguarded" STPUTC remained, which is fixed here.
function old new delta
subevalvar 1564 1576 +12
Signed-off-by: Karsten Sperling <ksperling@apple.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Based on patch by Uwe Kleine-König.
It makes sense to actually see the nitty-gritty details of DNS
querying, so bringing in (commented-out) musl's DNS request code.
function old new delta
nslookup_main 760 822 +62
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
On most 32bit architectures time_t (and a few other time related types)
are a signed 32bit wide integer type.
As a consequence they can only represent dates between
Fri Dec 13 08:45:52 PM UTC 1901
(-0x80000000 seconds before Jan 1 1970) and
Tue Jan 19 03:14:07 AM UTC 2038
(0x7fffffff seconds after Jan 1 1970). Given that some machines that are
built today have an expected lifetime of >15 years, this needs to be
extended. To to that, define the cpp symbol _TIME_BITS to 64 which
results in some magic in glibc to make time_t (and the few other time
related types) 64 bit wide.
This new switch CONFIG_TIME64 is in the spirit of CONFIG_LFS and only
expected to have the expected effect with glibc. On musl for examples
time_t already defaults to 64bit wide types.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
POSIX will be standardizing readlink (just the -n option) and realpath
(just -E and -e options):
https://www.austingroupbugs.net/view.php?id=1457
Change things for readlink so that the POSIX-mandated -n and -- work
even when disabling the non-standard (and partially non-working) -f
when FEATURE_READLINK_FOLLOW is clear.
POSIX also wants readlink to be verbose by default (if the argument is
not a symlink, readlink must output a diagnostic); I did NOT address
that one, because I'm waiting to see what the GNU Coreutils folks do:
https://lists.gnu.org/archive/html/bug-coreutils/2023-03/msg00035.html
Partial fix for https://bugs.busybox.net/show_bug.cgi?id=15466
function old new delta
packed_usage 34538 34557 +19
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
tr must have one or two non-option arguments. Display the usage
message if any other number is present.
function old new delta
.rodata 108389 108392 +3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 3/0) Total: 3 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Since commit 9e2a5668f (ash,hush: allow builtins to be tab-completed,
closes 7532) ash and hush have supported tab completion of builtins.
Other shells, bash and ksh for example, also support tab completion
of functions and aliases.
Add such support to ash and hush.
function old new delta
ash_command_name - 92 +92
hush_command_name - 63 +63
ash_builtin_name 17 - -17
hush_builtin_name 38 - -38
------------------------------------------------------------------------------
(add/remove: 2/2 grow/shrink: 0/0 up/down: 169/-55) Total: 100 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Avi Halachmi <avihpit@yahoo.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When icanon is set with -echo (e.g. ssh from an emacs shell) then
S.state will remain null but later it will be deferenced causing ash to
crash. Fix: additional check on state.
Signed-off-by: Akos Somfai <akos.somfai@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
- dropped the wrong define (not sure why it was there)
- <sys/random.h> not available if glibc <= 2.24
- GRND_NONBLOCK not defined if <sys/random.h> not included
- ret < 0 && errno == ENOSYS has to be true to get creditable set
Signed-off-by: Thomas Devoogdt <thomas@devoogdt.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We can just clear mailtime_hash to zero and have the same effect.
function old new delta
changemail 8 11 +3
mail_var_path_changed 1 - -1
cmdloop 398 382 -16
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/1 up/down: 3/-17) Total: -14 bytes
text data bss dec hex filename
1054786 559 5020 1060365 102e0d busybox_old
1054773 559 5020 1060352 102e00 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
padvance() exit condition is return value < 0, not == 0.
After MAIL changing twice, the logic erroneously
concluded that "you have new mail".
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Mea culpa, in "Do not allocate stack string in padvance" commit
(I left an extraneous "break" statement).
function old new delta
cmdloop 329 398 +69
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The trap and jobs builtins can be used to report information about
traps and jobs. This works when they're called from the current
shell but in a child shell the required information is usually
cleared. Special hacks allow:
- trap to work with command substitution;
- jobs to work with command substitution or in a pipeline.
Neither works with process substitution.
- Relax the test for the trap hack so it also supports pipelines.
- Pass the command to be evaluated to forkshell() in evalbackcmd()
so trap and jobs both work with process substitution.
function old new delta
forkchild 629 640 +11
argstr 1502 1496 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 11/-6) Total: 5 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
IOW: if name doesn't end with .ko, assume it's .gz/.xz or similar,
and ask kernel to uncompress it.
If finit_module(MODULE_INIT_COMPRESSED_FILE) fails, retry with
finit_module(0).
function old new delta
bb_init_module 151 197 +46
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 1d37186fe2 (ash: add bash-compatible EPOCH variables) added
support for the EPOCHSECONDS and EPOCHREALTIME variables.
These variables are dynamic and therefore require the VDYNAMIC flag
to be non-zero. However, this is only the case if support for the
RANDOM variable is enabled.
Give VDYNAMIC a non-zero value if either EPOCH variables or RANDOM
are enabled.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Commit 8baa643a3 (lineedit: match local directories when searching
PATH) included subdirectories of the current directory in the search
when tab-completing commands.
Unfortunately a short time later commit 1d180cd74 (lineedit: use
strncmp instead of is_prefixed_with (we know the length)) broke
this feature by returning an incorrect length for the array of paths.
Fix the length and reinstate matching of subdirectories.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
My gcc inlines both calls, so instead of "-20 bytes" I get only this:
function old new delta
sha256_begin 84 83 -1
sha1_begin 114 111 -3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-4) Total: -4 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
https://pubs.opengroup.org/onlinepubs/9699919799/utilities/find.html
-ok utility_name [argument ...] ;
The -ok primary shall be equivalent to -exec, except that the use
of a <plus-sign> to punctuate the end of the primary expression
need not be supported, and find shall request affirmation of the
invocation of utility_name using the current file as an argument
by writing to standard error as described in the STDERR section. If
the response on standard input is affirmative, the utility shall be
invoked. Otherwise, the command shall not be invoked and the value
of the -ok operand shall be false.
function old new delta
do_exec 438 517 +79
parse_params 1833 1845 +12
static.params 288 292 +4
.rodata 100771 100775 +4
packed_usage 34543 34541 -2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/1 up/down: 99/-2) Total: 97 bytes
Signed-off-by: David Leonard <d+busybox@adaptive-enterprises.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Found one case where SIGHUP does need some handling.
ash does not restore tty pgrp when killed by SIGHUP, and
this means process which started ash needs to restore it,
or it would get backgrounded when trying to use tty.
function old new delta
check_and_run_traps 214 229 +15
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Kernel should do the right thing.
(ash and dash do not have special SIGHUP handling.)
function old new delta
check_and_run_traps 278 214 -64
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Need to divide by (1<<32), not by (1<<32)-1.
Fraction of 0xffffffff is not 1 whole second.
function old new delta
.rodata 105264 105268 +4
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The 32-bit integer part of the NTP timestamp overflows in year 2036,
which starts the second NTP era.
Modify the timestamp conversion to shift values between 1900-1970 (in
the first era) to the second era to enable the client to measure its
offset correctly until year 2106 (assuming 64-bit time_t).
Also update the conversion from double used when stepping the clock to
work with 64-bit time_t after reaching the maximum 32-bit value in 2038
and the server conversion to work correctly in the next NTP era.
function old new delta
lfp_to_d 51 64 +13
step_time 326 332 +6
.rodata 105260 105264 +4
d_to_lfp 100 86 -14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/1 up/down: 23/-14) Total: 9 bytes
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The memcpy invocations in the subCommand function, modified by this
commit, previously used memcpy with overlapping memory regions. This is
undefined behavior. On Alpine Linux, it causes BusyBox ed to crash since
we compile BusyBox with -D_FORTIFY_SOURCE=2 and our fortify-headers
implementation catches this source of undefined behavior [0]. The issue
can only be triggered if the replacement string is the same size or
shorter than the old string.
Looking at the code, it seems to me that a memmove(3) is what was
actually intended here, this commit modifies the code accordingly.
[0]: https://gitlab.alpinelinux.org/alpine/aports/-/issues/13504
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
LOOP_CONFIGURE is added to Linux 5.8
function old new delta
NO_LOOP_CONFIGURE (old code):
set_loop 784 782 -2
LOOP_CONFIGURE:
set_loop 784 653 -131
TRY_LOOP_CONFIGURE:
set_loop 784 811 +27
Based on a patch by Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Extract subfunction set_loop_info() from set_loop()
function old new delta
set_loop 760 784 +24
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Extract subfunction get_next_free_loop() from set_loop()
Also fix miss free(try) when stat(try) and mknod fail
function old new delta
set_loop 807 790 -17
Fixes: 3448914e8cc5 ("mount,losetup: use /dev/loop-control is it exists")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When calling unzip -l the date and time output was missing big-endian
conversions.
Signed-off-by: Peter Kaestle <peter.kaestle@nokia.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Various tools are Linuxish and should thus only attempted to build on
Linux only. Some features are also Linux-only.
Also, libresolv is used on all GNU platforms, notably GNU/Hurd and
GNU/kfreeBSD.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Not all options are actually implemented. In this case, return a message
and an error code to make it clear that the requested command has not
been executed.
function old new delta
.rodata 105200 105224 +24
fbset_main 747 733 -14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 24/-14) Total: 10 bytes
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When /dev/loop-control exists and *device is empty,
the mount may fail if a concurrent mount is running.
function old new delta
set_loop 809 807 -2
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Running an applet with '--help' as its only argument is treated
as a special case. If additional arguments follow '--help' the
behaviour is inconsistent:
- applets which call single_argv() print help and do nothing else;
- applets which call getopt() report "unrecognized option '--help'"
and print help anyway;
- expr says "expr: syntax error" and doesn't print help;
- printenv silently ignores '--help', prints any other variables
and doesn't print help;
- realpath says "--help: No such file or directory", prints the path
of any other files and doesn't print help.
If the first argument is '--help' ignore any other arguments and print
help. This is more consistent and most likely what the user wanted.
See also commit 6bdfbc4cb (libbb: fix '--help' handling in
FEATURE_SH_NOFORK=y).
function old new delta
show_usage_if_dash_dash_help 75 69 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-6) Total: -6 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Busybox vi provides the 'ZZ' command to save and close
the similar 'ZQ' command just exits without saving.
function old new delta
do_cmd 4222 4244 +22
Signed-off-by: Grob Grobmann <grobgrobmann@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Patch by soeren@soeren-tempel.net
The idx variable points to a value in the stack string (as managed
by STPUTC). STPUTC may resize this stack string via realloc(3). If
this happens, the idx pointer needs to be updated. Otherwise,
dereferencing idx may result in a use-after free.
function old new delta
subevalvar 1562 1566 +4
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The line editing code and ash disagree when the current directory
is changed to a symbolic link:
~ $ mkdir real
~ $ ln -s real link
~ $ cd link
~/real $ pwd
/home/rmyf36/link
Note the prompt says we're in ~/real. Bash does:
[rmy@random ~]$ cd link
[rmy@random link]$ pwd
/home/rmyf36/link
Ash uses the name supplied by the user while the line editing code
calls getcwd(3). The discrepancy can be avoided by fetching the
value of PWD from ash.
Hush calls getcwd(3) when the directory is changed
so there's no disagreement with the line editing code.
There is no standard how shells should handle cd'ing into
symlinks.
function old new delta
parse_and_put_prompt 838 869 +31
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
When the 'cc' command is invoked with autoindent enabled it
should use the indent of the first line being changed.
The size of the indent has to be established before char_insert()
is called as the lines being changed are deleted. Introduce a
new global variable, newindent, to handle this. The indentcol
global is now effectively a static variable in char_insert().
function old new delta
do_cmd 4247 4308 +61
vi_main 416 422 +6
char_insert 891 875 -16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 67/-16) Total: 51 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Suppose autoindent is enabled and we have a line with an initial
tab where we want to split the words onto separate lines:
split the words
One way to do this is with the sequence 'f r<CR>;r<CR>', but in
BusyBox vi the result is:
split
he
words
This is a regression introduced by commit 9659a8db1 (vi: remove
autoindent from otherwise empty lines). The amount of indentation
is being recorded when the 'r' command inserts a newline but
isn't subsequently reset. A fix is to only record the indent
when in insert or replace mode. Proper handling of the 'o' and
'O' commands then requires them to switch to insert mode before
calling char_insert() to insert a newline.
function old new delta
char_insert 884 891 +7
do_cmd 4243 4247 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 11/0) Total: 11 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
ash and hush correctly use the value of HOME for tilde expansion.
However the line editing code in libbb obtains the user's home
directory by calling getpwuid(). Thus tildes in tab completion
and prompts may be interpreted differently than in tilde expansion.
When the line editing code is invoked from a shell make it use the
shell's interpretation of tilde. This is similar to how GNU readline
and bash collaborate.
function old new delta
get_homedir_or_NULL 29 72 +43
optschanged 119 126 +7
hush_main 1204 1211 +7
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 57/0) Total: 57 bytes
v2: Always check for HOME before trying the password database: this
is what GNU readline does.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The functions bb_perror_nomsg() and bb_perror_nomsg_and_die() are
used to print error messages where no specific information is
available. For example:
$ busybox mktemp -p /
mktemp: (null): Permission denied
mktemp(3) doesn't tell us the name of the file it tried to create.
However, printing '(null)' is a regression introduced by commit
6937487be (libbb: reduce the overhead of single parameter bb_error_msg()
calls). Restore the previous behaviour by reverting the changes to
the two functions mentioned:
$ busybox mktemp -p /
mktemp: Permission denied
function old new delta
bb_perror_nomsg_and_die 7 14 +7
bb_perror_nomsg 7 14 +7
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 14/0) Total: 14 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Or else security people will never stop nagging us.
function old new delta
seedrng_main 884 906 +22
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
It's very inconvenient for a cron user not to be able to set a
"personal" PATH for their cron jobs, as is possible with other crons
function old new delta
load_crontab 868 942 +74
.rodata 104878 104884 +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 80/0) Total: 80 bytes
Signed-off-by: Paul Fox <pgf@foxharp.boston.ma.us>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We can now remove a separate buffer
function old new delta
seedrng_main 930 884 -46
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Also, do not test for locking errors: on Linux, they do not happen.
function old new delta
.rodata 104900 104878 -22
seedrng_main 1022 994 -28
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
gcc in fact detects this and does this transformation
when generating code - no object code changes.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
We do not expect /dev/[u]random to be not openable/readable.
If they are, just bail out (something is obviously very wrong).
function old new delta
seedrng_main 1077 1076 -1
.rodata 104939 104929 -10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
-a meant both "don't up iface before each link detection" and "don't up iface
when it newly appears". But they are not the same.
I have a dock station where eth1 appears when I attach the notebook to it
(looks like it's hanging off a USB bus). IOW: appearance of this interface
is functionally equivalent to attaching ethernet cable.
ifplugd meant to be able to *automatically* handle this case.
Currently, with -a, it couldn't: newly appearing iface stayed down,
user had to manually up it.
function old new delta
packed_usage 34253 34296 +43
.rodata 104876 104877 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 44/0) Total: 44 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
-Oz Optimize aggressively for size rather than speed.
with gcc-12 so far (i think only https://gcc.gnu.org/PR32803 and 103773 )
"shorter load imm on x86_64":
(add/remove: 0/0 grow/shrink: 4/1670 up/down: 6/-13196) Total: -13190 bytes
text data bss dec hex filename
975753 4227 1816 981796 efb24 busybox_old
962442 4227 1816 968485 ec725 busybox_unstripped
with clang-15:
(add/remove: 394/34 grow/shrink: 161/1856 up/down: 18644/-98946)Total: -80302 bytes
text data bss dec hex filename
1120994 16066 1696 1138756 116044 busybox_old
1040689 16026 1696 1058411 10266b busybox_unstripped
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Remove redundant includes.
We have platform specific handling in libbb.h and platform.h so we can
handle quirks in a central place.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Since we're passing 0 as the timeout, we don't need safe_poll. Remove
cleanup at end of program, since OS does that, which lets us simplify
control flow. Factor repeated function calls into ternary loop.
function old new delta
seedrng_main 1061 1459 +398
seed_from_file_if_exists 468 - -468
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/0 up/down: 398/-468) Total: -70 bytes
text data bss dec hex filename
1052781 16515 1816 1071112 105808 busybox_old
1052711 16515 1816 1071042 1057c2 busybox_unstripped
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Pass down the correct EXTRA_CFLAGS to the compiler driver when building
assembler source.
Otherwise building busybox for a multilib other than the default failed
to link since hash_md5_sha256_x86-64_shaNI.o and
hash_md5_sha_x86-64_shaNI.o were built for the default arch which might
not what we requested in the EXTRA_CFLAGS.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Colon and search commands are entered on the status line. Since
the cursor position wasn't being tracked backspacing over a tab
resulted in a mismatch between the actual and apparent content
of the command.
function old new delta
get_input_line 178 180 +2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 2/0) Total: 2 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
- Avoid an xstrdup call with seed_dir.
- Compress format strings with %s arguments.
- Open /dev/urandom for add entropy ioctl rather than /dev/random, so that
/dev/random is only used for the already-sightly-flawed poll() check for
creditability.
function old new delta
seedrng_main 948 958 +10
seed_from_file_if_exists 410 417 +7
.rodata 108338 108206 -132
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 17/-132) Total: -115 bytes
text data bss dec hex filename
975829 4227 1816 981872 efb70 busybox_old
975714 4227 1816 981757 efafd busybox_unstripped
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
- Use predefined strings where possible.
- Open /dev/random with O_RDONLY for ioctl().
function old new delta
seed_from_file_if_exists 413 410 -3
.rodata 108407 108350 -57
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-60) Total: -60 bytes
text data bss dec hex filename
975979 4227 1816 982022 efc06 busybox_old
975919 4227 1816 981962 efbca busybox_unstripped
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
- Remove all games with errno to further reduce code size.
- Combine error messages that don't benefit from being separated.
- Lock directory fd instead of separate file.
function old new delta
static.longopts 38 26 -12
seed_from_file_if_exists 426 413 -13
packed_usage 34519 34480 -39
.rodata 108484 108407 -77
seedrng_main 1088 1000 -88
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/5 up/down: 0/-229) Total: -229 bytes
text data bss dec hex filename
976208 4227 1816 982251 efceb busybox_old
975979 4227 1816 982022 efc06 busybox_unstripped
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
- Remove global variables and pass dfd by value, opened once instead of
twice, which shaves off some more bytes.
function old new delta
seedrng_main 1086 1088 +2
seed_dir 8 - -8
non_creditable_seed 8 - -8
lock_file 8 - -8
creditable_seed 8 - -8
seed_from_file_if_exists 456 426 -30
------------------------------------------------------------------------------
(add/remove: 0/4 grow/shrink: 1/1 up/down: 2/-62) Total: -60 bytes
text data bss dec hex filename
976236 4227 1848 982311 efd27 busybox_old
976208 4227 1816 982251 efceb busybox_unstripped
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
- Hoist bb_strtoul out of min/max to prevent quadruple evaluation.
- Don't use separate variables for boottime/realtime.
- Make use of ENABLE_FEATURE_CLEAN_UP where appropriate.
- Order hash initialization after lock taking per Bernhard's taste.
- Add comment description of theory of operation.
function old new delta
seed_from_file_if_exists 533 456 -77
seedrng_main 1218 1086 -132
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-209) Total: -209 bytes
text data bss dec hex filename
976445 4227 1848 982520 efdf8 busybox_old
976236 4227 1848 982311 efd27 busybox_unstripped
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
- Make extensive use of libbb.h functions, which simplify a lot of code
and reduce binary size considerably.
- Use the already existing PID_FILE_PATH variable.
function old new delta
seed_from_file_if_exists 697 533 -164
.rodata 108665 108484 -181
seedrng_main 1463 1218 -245
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-590) Total: -590 bytes
text data bss dec hex filename
977035 4227 1848 983110 f0046 busybox_old
976445 4227 1848 982520 efdf8 busybox_unstripped
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
The RNG can't actually be seeded from a shell script, due to the
reliance on ioctls and the fact that entropy written into the
unprivileged /dev/urandom device is not immediately mixed in, making
subsequent seed reads dangerous. For this reason, the seedrng project
provides a basic "C script" meant to be copy and pasted into projects
like Busybox and tweaked as needed: <https://git.zx2c4.com/seedrng/about/>.
The SeedRNG construction has been part of systemd's seeder since
January, and recently was added to Android, OpenRC, and Void's Runit,
with more integrations on their way depending on context. Virtually
every single Busybox-based distro I have seen seeds things in wrong,
incomplete, or otherwise dangerous way. For example, fixing this issue
in Buildroot requires first for Busybox to have this fix.
This commit imports it into Busybox and wires up the basic config. The
utility itself is tiny, and unlike the example code from the SeedRNG
project, we can re-use libbb's existing hash functions, rather than
having to ship a standalone BLAKE2s, which makes this even smaller.
function old new delta
seedrng_main - 1463 +1463
.rodata 107858 108665 +807
seed_from_file_if_exists - 697 +697
packed_usage 34414 34519 +105
static.longopts - 38 +38
static.seedrng_prefix - 26 +26
seed_dir - 8 +8
non_creditable_seed - 8 +8
lock_file - 8 +8
creditable_seed - 8 +8
applet_names 2747 2755 +8
applet_main 3192 3200 +8
------------------------------------------------------------------------------
(add/remove: 9/0 grow/shrink: 4/0 up/down: 3184/0) Total: 3184 bytes
text data bss dec hex filename
973776 4219 1816 979811 ef363 busybox_old
977035 4227 1848 983110 f0046 busybox_unstripped
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
In replace mode ('R' command) the backspace character should get
special treatment:
- backspace only goes back to the start of the replacement;
- backspacing over replaced characters restores the original text.
Prior to this commit BusyBox vi deleted the characters both before
and after the cursor in replace mode.
function old new delta
undo_pop - 235 +235
char_insert 858 884 +26
indicate_error 81 84 +3
find_range 654 657 +3
static.text_yank 77 79 +2
do_cmd 4486 4243 -243
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 4/1 up/down: 269/-243) Total: 26 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Do not skip over "*p = c;" statement.
Testcase: echo ~~nouser/qwe
function old new delta
argstr 1396 1406 +10
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Without this patch, BusyBox handles bash pattern substitutions without
a terminating '/' character incorrectly.
Consider the following shell script:
_bootstrapver=5.0.211-r0
_referencesdir="/usr/${_bootstrapver/-*}/Sources"
echo $_referencesdir
This should output `/usr/5.0.211/Sources`. However, without this patch
it instead outputs `/usr/5.0.211Sources`. This is due to the fact that
BusyBox expects the bash pattern substitutions to always be terminated
with a '/' (at least in this part of subvareval) and thus reads passed
the substitution itself and consumes the '/' character which is part of
the literal string. If there is no '/' after the substitution then
BusyBox might perform an out-of-bounds read under certain circumstances.
When replacing the bash pattern substitution with `${_bootstrapver/-*/}`,
or with this patch applied, ash outputs the correct value.
Signed-off-by: Sören Tempel <soeren@soeren-tempel.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map"
function old new delta
.rodata 108586 108460 -126
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-126) Total: -126 bytes
text data bss dec hex filename
970412 4219 1848 976479 ee65f busybox_old
970286 4219 1848 976353 ee5e1 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
This can be faster on some CPUs.
On Skylake, evidently load latency from L1 (or store-to-load
forwarding in LSU) is fast enough to completely hide
memory reference latencies here.
function old new delta
sha1_process_block64 3495 3514 +19
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
The specification requires volume label to be space padded.
Latest fsck.vfat will remove the zero padded volume label
as invalid. See also:
https://github.com/dosfstools/dosfstools/issues/172
Make the default label also "NO NAME" which has the special meaning
that label is not set.
function old new delta
mkfs_vfat_main 1470 1502 +32
static.NO_NAME_11 - 12 +12
.rodata 104309 104318 +9
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/0 up/down: 53/0) Total: 53 bytes
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
In order to improve compatibility with GNU cmp add support for long
options to busybox cmp.
function old new delta
static.cmp_longopts - 36 +36
cmp_main 589 594 +5
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/0 up/down: 41/0) Total: 41 bytes
Signed-off-by: Walter Lozano <walter.lozano@collabora.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
If a line specifies a binary checksum whose path contains two adjacent
spaces, when checking digests with -c the two spaces will be used as the
separator between the digest and the pathname instead of " *", as shown:
$ echo foo > "/tmp/two spaces"
$ md5sum -b "/tmp/two spaces" # This is GNU md5sum
d3b07384d113edec49eaa6238ad5ff00 */tmp/two spaces
$ md5sum -b "/tmp/two spaces" | ./busybox md5sum -c
md5sum: can't open 'spaces': No such file or directory
spaces: FAILED
md5sum: WARNING: 1 of 1 computed checksums did NOT match
function old new delta
md5_sha1_sum_main 503 496 -7
Signed-off-by: Emanuele Giacomelli <emanuele.giacomelli@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Apart from the -p option, POSIX also mandates an -s option which
suppresses the output of byte counts for the e, E, r, and w command.
From these commands, Busybox ed presently only implements the r and w
commands. This commit ensures that these two command do not output any
bytes counts when the -s option is passed. The shell escape command,
also effected by the -s option, is not implemented by Busybox at the
moment.
function old new delta
packed_usage 34096 34115 +19
doCommands 1887 1900 +13
readLines 388 397 +9
.rodata 104196 104200 +4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 45/0) Total: 45 bytes
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
//config: tty is used to print the name of the current terminal to
Loaded 100 of 514 files, more files were not shown because too many files have changed in this diff.
Show more
Reference in new issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.