Compare commits

..
26 Commits
Author SHA1 Message Date
Eric Andersen d3986eb7ec When doing 'make release' nuke the .svn directories, not the
CVS dirs (since they are no longer present)
2005-08-17 00:01:38 +00:00
Eric Andersen 9e78a1772d We don't need no stinkin changelog 2005-08-16 23:59:17 +00:00
Mike Frysinger f7c7dde158 Bernhard Fischer writes: fix devfsd usage 2005-08-15 22:13:21 +00:00
Rob Landley 830c040f6f Patch from Stephane Billiart to improve ash error message. 2005-08-14 19:17:31 +00:00
Rob Landley 045dedad91 A complete rewrite of the README. Probably broke stuff, but it's unlikely
to affect the compile, now is it?
2005-08-14 00:19:32 +00:00
Rob Landley b309ec71c8 Delete the patches directory from 1.0. 2005-08-13 04:05:50 +00:00
Rob Landley 866bad310f And 10922.
Ick.
2005-08-13 03:10:29 +00:00
Rob Landley 5e1f2d429d 11043 and 11011 2005-08-13 02:28:34 +00:00
Rob Landley 0be69b1693 More backports:
10957 start-stop-daemon -q
10981, 10982, 10994, 10996, 10997: dumpkmap cleanup
10983: top tweak
11000 traceroute
2005-08-13 01:22:03 +00:00
Rob Landley c7cba1ae3b This is published from trunk, remove from 1.0 branch. 2005-08-13 01:12:49 +00:00
Rob Landley be3dae145f Makefile related backports:
10945, 10946 Make compile much, much faster.
10923 big makefile change.  Nervous.
10946, 10991, 10998, 11003 small makefile fixes.
2005-08-13 01:10:27 +00:00
Rob Landley 6022fc8723 Backport:
10882 tar fix
10884, 10920, 11128 tail fixes
10885 tftp -g fix
10900 dpkg fix (script support)
And I guess 10918 isn't relevant?
2005-08-13 00:46:00 +00:00
Rob Landley fc455b2101 1.0 backports of:
10861, 10875, 10881, 10888 ash fix
10865 suid thing?  (look at this)
10886 telnet bugfix
10866 ftp fix for RFC 959 compliance.
10867 Remove spurious newline from cp -i prompt.
10874 ksyslogd fix
10876 msh fix
10877 httpd fix
10880, 10889, 11005 dhcp fixes
2005-08-13 00:26:01 +00:00
Rob Landley 365a345e92 Backport 10864 and 10999. 2005-08-12 06:08:41 +00:00
Rob Landley d5138f44fe Backport 10853, 10860/10870, and 10862. 2005-08-12 06:06:54 +00:00
Rob Landley 9344d8aa10 And 10873. 2005-08-12 06:02:30 +00:00
Eric Andersen 44dbd4bc65 Do not define 'AUTOCONF_INCLUDED' 2005-08-02 01:00:20 +00:00
Mike Frysinger 25b8652b4f patch by srowe in Bug 359 to fix fgrep aliasing 2005-07-31 22:41:05 +00:00
Eric Andersen 091a3e510e The change in getty.c in Busybox 1.01 caused the /etc/issue file to not
be displayed unless CONFIG_FEATURE_UTMP is set.  This was not the intended
result.
2005-07-27 06:03:24 +00:00
Mike Frysinger ffaa3deeeb no longer used as reported by apgo in Bug 348 2005-07-26 22:53:35 +00:00
Rob Landley 5f07779aca Shaun Jackman points out that we shouldn't depend on netdb.h to include
netinet.h for us, although what strange compiler this is expected to 
cause problems with wasn't specified...
2005-07-25 08:09:51 +00:00
Rob Landley ab6399a4c6 Tweak from Sean Jackman: use socklen_t instead of size_t for a declaration. 2005-07-25 01:46:24 +00:00
Eric Andersen ca17c937c2 Bump the version to 1.01 2005-07-19 00:01:10 +00:00
Eric Andersen d62df011a0 Backport 10849 and 10851 2005-07-18 23:54:47 +00:00
Eric Andersen 164a716f96 busybox-1.0.1-rc1.patch
http://busybox.net/lists/busybox/2005-July/014974.html
2005-07-18 23:51:27 +00:00
nobody 8c59a0bf0e This commit was manufactured by cvs2svn to create tag 'busybox_1_00'. 2004-10-13 09:42:10 +00:00
2193 changed files with 143437 additions and 288326 deletions

No files matched your search

-36
View File
@@ -1,36 +0,0 @@
#
# Kbuild ignores
#
.*
*.o
*.o.*
*.a
*.s
Kbuild
Config.in
#
# Never ignore these
#
!.gitignore
#
# Normal output
#
/busybox
/busybox_unstripped*
#
# Backups / patches
#
*~
*.orig
*.rej
/*.patch
#
# debugging stuff
#
core
.gdb_history
.gdbinit
-742
View File
@@ -1,742 +0,0 @@
#
# For a description of the syntax of this configuration file,
# see scripts/kbuild/config-language.txt.
#
mainmenu "BusyBox Configuration"
config HAVE_DOT_CONFIG
bool
default y
menu "Busybox Settings"
menu "General Configuration"
config DESKTOP
bool "Enable options for full-blown desktop systems"
default y
help
Enable options and features which are not essential.
Select this only if you plan to use busybox on full-blown
desktop machine with common Linux distro, not on an embedded box.
config EXTRA_COMPAT
bool "Provide compatible behavior for rare corner cases (bigger code)"
default n
help
This option makes grep, sed etc handle rare corner cases
(embedded NUL bytes and such). This makes code bigger and uses
some GNU extensions in libc. You probably only need this option
if you plan to run busybox on desktop.
config INCLUDE_SUSv2
bool "Enable obsolete features removed before SUSv3"
default y
help
This option will enable backwards compatibility with SuSv2,
specifically, old-style numeric options ('command -1 <file>')
will be supported in head, tail, and fold. (Note: should
affect renice too.)
config USE_PORTABLE_CODE
bool "Avoid using GCC-specific code constructs"
default n
help
Use this option if you are trying to compile busybox with
compiler other than gcc.
If you do use gcc, this option may needlessly increase code size.
choice
prompt "Buffer allocation policy"
default FEATURE_BUFFERS_USE_MALLOC
help
There are 3 ways BusyBox can handle buffer allocations:
- Use malloc. This costs code size for the call to xmalloc.
- Put them on stack. For some very small machines with limited stack
space, this can be deadly. For most folks, this works just fine.
- Put them in BSS. This works beautifully for computers with a real
MMU (and OS support), but wastes runtime RAM for uCLinux. This
behavior was the only one available for BusyBox versions 0.48 and
earlier.
config FEATURE_BUFFERS_USE_MALLOC
bool "Allocate with Malloc"
config FEATURE_BUFFERS_GO_ON_STACK
bool "Allocate on the Stack"
config FEATURE_BUFFERS_GO_IN_BSS
bool "Allocate in the .bss section"
endchoice
config SHOW_USAGE
bool "Show terse applet usage messages"
default y
help
All BusyBox applets will show help messages when invoked with
wrong arguments. You can turn off printing these terse usage
messages if you say no here.
This will save you up to 7k.
config FEATURE_VERBOSE_USAGE
bool "Show verbose applet usage messages"
default y
depends on SHOW_USAGE
help
All BusyBox applets will show more verbose help messages when
busybox is invoked with --help. This will add a lot of text to the
busybox binary. In the default configuration, this will add about
13k, but it can add much more depending on your configuration.
config FEATURE_COMPRESS_USAGE
bool "Store applet usage messages in compressed form"
default y
depends on SHOW_USAGE
help
Store usage messages in compressed form, uncompress them on-the-fly
when <applet> --help is called.
If you have a really tiny busybox with few applets enabled (and
bunzip2 isn't one of them), the overhead of the decompressor might
be noticeable. Also, if you run executables directly from ROM
and have very little memory, this might not be a win. Otherwise,
you probably want this.
config FEATURE_INSTALLER
bool "Support --install [-s] to install applet links at runtime"
default y
help
Enable 'busybox --install [-s]' support. This will allow you to use
busybox at runtime to create hard links or symlinks for all the
applets that are compiled into busybox.
config LOCALE_SUPPORT
bool "Enable locale support (system needs locale for this to work)"
default n
help
Enable this if your system has locale support and you would like
busybox to support locale settings.
config UNICODE_SUPPORT
bool "Support Unicode"
default y
help
This makes various applets aware that one byte is not
one character on screen.
Busybox aims to eventually work correctly with Unicode displays.
Any older encodings are not guaranteed to work.
Probably by the time when busybox will be fully Unicode-clean,
other encodings will be mainly of historic interest.
config UNICODE_USING_LOCALE
bool "Use libc routines for Unicode (else uses internal ones)"
default n
depends on UNICODE_SUPPORT && LOCALE_SUPPORT
help
With this option on, Unicode support is implemented using libc
routines. Otherwise, internal implementation is used.
Internal implementation is smaller.
config FEATURE_CHECK_UNICODE_IN_ENV
bool "Check $LANG environment variable"
default n
depends on UNICODE_SUPPORT && !UNICODE_USING_LOCALE
help
With this option on, Unicode support is activated
only if LANG variable has the value of the form "xxxx.utf8"
Otherwise, Unicode support will be always enabled and active.
config SUBST_WCHAR
int "Character code to substitute unprintable characters with"
depends on UNICODE_SUPPORT
default 63
help
Typical values are 63 for '?' (works with any output device),
30 for ASCII substitute control code,
65533 (0xfffd) for Unicode replacement character.
config LAST_SUPPORTED_WCHAR
int "Range of supported Unicode characters"
depends on UNICODE_SUPPORT
default 767
help
Any character with Unicode value bigger than this is assumed
to be non-printable on output device. Many applets replace
such chars with substitution character.
The idea is that many valid printable Unicode chars are
nevertheless are not displayed correctly. Think about
combining charachers, double-wide hieroglyphs, obscure
characters in dozens of ancient scripts...
Many terminals, terminal emulators, xterms etc will fail
to handle them correctly. Choose the smallest value
which suits your needs.
Typical values are:
126 - ASCII only
767 (0x2ff) - there are no combining chars in [0..767] range
(the range includes Latin 1, Latin Ext. A and B),
code is ~700 bytes smaller for this case.
4351 (0x10ff) - there are no double-wide chars in [0..4351] range,
code is ~300 bytes smaller for this case.
12799 (0x31ff) - nearly all non-ideographic characters are
available in [0..12799] range, including
East Asian scripts like katakana, hiragana, hangul,
bopomofo...
0 - off, any valid printable Unicode character will be printed.
config UNICODE_COMBINING_WCHARS
bool "Allow zero-width Unicode characters on output"
default n
depends on UNICODE_SUPPORT
help
With this option off, any Unicode char with width of 0
is substituted on output.
config UNICODE_WIDE_WCHARS
bool "Allow wide Unicode characters on output"
default n
depends on UNICODE_SUPPORT
help
With this option off, any Unicode char with width > 1
is substituted on output.
config UNICODE_BIDI_SUPPORT
bool "Bidirectional character-aware line input"
default n
depends on UNICODE_SUPPORT && !UNICODE_USING_LOCALE
help
With this option on, right-to-left Unicode characters
are treated differently on input (e.g. cursor movement).
config UNICODE_NEUTRAL_TABLE
bool "In bidi input, support non-ASCII neutral chars too"
default n
depends on UNICODE_BIDI_SUPPORT
help
In most cases it's enough to treat only ASCII non-letters
(i.e. punctuation, numbers and space) as characters
with neutral directionality.
With this option on, more extensive (and bigger) table
of neutral chars will be used.
config UNICODE_PRESERVE_BROKEN
bool "Make it possible to enter sequences of chars which are not Unicode"
default n
depends on UNICODE_SUPPORT
help
With this option on, invalid UTF-8 bytes are not substituted
with the selected substitution character.
For example, this means that entering 'l', 's', ' ', 0xff, [Enter]
at shell prompt will list file named 0xff (single char name
with char value 255), not file named '?'.
config LONG_OPTS
bool "Support for --long-options"
default y
help
Enable this if you want busybox applets to use the gnu --long-option
style, in addition to single character -a -b -c style options.
config FEATURE_DEVPTS
bool "Use the devpts filesystem for Unix98 PTYs"
default y
help
Enable if you want BusyBox to use Unix98 PTY support. If enabled,
busybox will use /dev/ptmx for the master side of the pseudoterminal
and /dev/pts/<number> for the slave side. Otherwise, BSD style
/dev/ttyp<number> will be used. To use this option, you should have
devpts mounted.
config FEATURE_CLEAN_UP
bool "Clean up all memory before exiting (usually not needed)"
default n
help
As a size optimization, busybox normally exits without explicitly
freeing dynamically allocated memory or closing files. This saves
space since the OS will clean up for us, but it can confuse debuggers
like valgrind, which report tons of memory and resource leaks.
Don't enable this unless you have a really good reason to clean
things up manually.
config FEATURE_UTMP
bool "Support utmp file"
default y
help
The file /var/run/utmp is used to track who is currently logged in.
With this option on, certain applets (getty, login, telnetd etc)
will create and delete entries there.
"who" applet requires this option.
config FEATURE_WTMP
bool "Support wtmp file"
default y
select FEATURE_UTMP
help
The file /var/run/wtmp is used to track when users have logged into
and logged out of the system.
With this option on, certain applets (getty, login, telnetd etc)
will append new entries there.
"last" applet requires this option.
config FEATURE_PIDFILE
bool "Support writing pidfiles"
default y
help
This option makes some applets (e.g. crond, syslogd, inetd) write
a pidfile in /var/run. Some applications rely on them.
config FEATURE_SUID
bool "Support for SUID/SGID handling"
default y
help
With this option you can install the busybox binary belonging
to root with the suid bit set, and it will automatically drop
priviledges for applets that don't need root access.
If you are really paranoid and don't want to do this, build two
busybox binaries with different applets in them (and the appropriate
symlinks pointing to each binary), and only set the suid bit on the
one that needs it. The applets currently marked to need the suid bit
are:
crontab, dnsd, findfs, ipcrm, ipcs, login, passwd, ping, su,
traceroute, vlock.
config FEATURE_SUID_CONFIG
bool "Runtime SUID/SGID configuration via /etc/busybox.conf"
default y if FEATURE_SUID
depends on FEATURE_SUID
help
Allow the SUID / SGID state of an applet to be determined at runtime
by checking /etc/busybox.conf. (This is sort of a poor man's sudo.)
The format of this file is as follows:
<applet> = [Ssx-][Ssx-][x-] (<username>|<uid>).(<groupname>|<gid>)
An example might help:
[SUID]
su = ssx root.0 # applet su can be run by anyone and runs with
# euid=0/egid=0
su = ssx # exactly the same
mount = sx- root.disk # applet mount can be run by root and members
# of group disk and runs with euid=0
cp = --- # disable applet cp for everyone
The file has to be owned by user root, group root and has to be
writeable only by root:
(chown 0.0 /etc/busybox.conf; chmod 600 /etc/busybox.conf)
The busybox executable has to be owned by user root, group
root and has to be setuid root for this to work:
(chown 0.0 /bin/busybox; chmod 4755 /bin/busybox)
Robert 'sandman' Griebl has more information here:
<url: http://www.softforge.de/bb/suid.html >.
config FEATURE_SUID_CONFIG_QUIET
bool "Suppress warning message if /etc/busybox.conf is not readable"
default y
depends on FEATURE_SUID_CONFIG
help
/etc/busybox.conf should be readable by the user needing the SUID,
check this option to avoid users to be notified about missing
permissions.
config SELINUX
bool "Support NSA Security Enhanced Linux"
default n
help
Enable support for SELinux in applets ls, ps, and id. Also provide
the option of compiling in SELinux applets.
If you do not have a complete SELinux userland installed, this stuff
will not compile. Go visit
http://www.nsa.gov/selinux/index.html
to download the necessary stuff to allow busybox to compile with
this option enabled. Specifially, libselinux 1.28 or better is
directly required by busybox. If the installation is located in a
non-standard directory, provide it by invoking make as follows:
CFLAGS=-I<libselinux-include-path> \
LDFLAGS=-L<libselinux-lib-path> \
make
Most people will leave this set to 'N'.
config FEATURE_PREFER_APPLETS
bool "exec prefers applets"
default n
help
This is an experimental option which directs applets about to
call 'exec' to try and find an applicable busybox applet before
searching the PATH. This is typically done by exec'ing
/proc/self/exe.
This may affect shell, find -exec, xargs and similar applets.
They will use applets even if /bin/<applet> -> busybox link
is missing (or is not a link to busybox). However, this causes
problems in chroot jails without mounted /proc and with ps/top
(command name can be shown as 'exe' for applets started this way).
config BUSYBOX_EXEC_PATH
string "Path to BusyBox executable"
default "/proc/self/exe"
help
When Busybox applets need to run other busybox applets, BusyBox
sometimes needs to exec() itself. When the /proc filesystem is
mounted, /proc/self/exe always points to the currently running
executable. If you haven't got /proc, set this to wherever you
want to run BusyBox from.
# These are auto-selected by other options
config FEATURE_SYSLOG
bool #No description makes it a hidden option
default n
#help
# This option is auto-selected when you select any applet which may
# send its output to syslog. You do not need to select it manually.
config FEATURE_HAVE_RPC
bool #No description makes it a hidden option
default n
#help
# This is automatically selected if any of enabled applets need it.
# You do not need to select it manually.
endmenu
menu 'Build Options'
config STATIC
bool "Build BusyBox as a static binary (no shared libs)"
default n
help
If you want to build a static BusyBox binary, which does not
use or require any shared libraries, then enable this option.
This can cause BusyBox to be considerably larger, so you should
leave this option false unless you have a good reason (i.e.
your target platform does not support shared libraries, or
you are building an initrd which doesn't need anything but
BusyBox, etc).
Most people will leave this set to 'N'.
config PIE
bool "Build BusyBox as a position independent executable"
default n
depends on !STATIC
help
(TODO: what is it and why/when is it useful?)
Most people will leave this set to 'N'.
config NOMMU
bool "Force NOMMU build"
default n
help
Busybox tries to detect whether architecture it is being
built against supports MMU or not. If this detection fails,
or if you want to build NOMMU version of busybox for testing,
you may force NOMMU build here.
Most people will leave this set to 'N'.
# PIE can be made to work with BUILD_LIBBUSYBOX, but currently
# build system does not support that
config BUILD_LIBBUSYBOX
bool "Build shared libbusybox"
default n
depends on !FEATURE_PREFER_APPLETS && !PIE && !STATIC
help
Build a shared library libbusybox.so.N.N.N which contains all
busybox code.
This feature allows every applet to be built as a tiny
separate executable. Enabling it for "one big busybox binary"
approach serves no purpose and increases code size.
You should almost certainly say "no" to this.
### config FEATURE_FULL_LIBBUSYBOX
### bool "Feature-complete libbusybox"
### default n if !FEATURE_SHARED_BUSYBOX
### depends on BUILD_LIBBUSYBOX
### help
### Build a libbusybox with the complete feature-set, disregarding
### the actually selected config.
###
### Normally, libbusybox will only contain the features which are
### used by busybox itself. If you plan to write a separate
### standalone application which uses libbusybox say 'Y'.
###
### Note: libbusybox is GPL, not LGPL, and exports no stable API that
### might act as a copyright barrier. We can and will modify the
### exported function set between releases (even minor version number
### changes), and happily break out-of-tree features.
###
### Say 'N' if in doubt.
config FEATURE_INDIVIDUAL
bool "Produce a binary for each applet, linked against libbusybox"
default y
depends on BUILD_LIBBUSYBOX
help
If your CPU architecture doesn't allow for sharing text/rodata
sections of running binaries, but allows for runtime dynamic
libraries, this option will allow you to reduce memory footprint
when you have many different applets running at once.
If your CPU architecture allows for sharing text/rodata,
having single binary is more optimal.
Each applet will be a tiny program, dynamically linked
against libbusybox.so.N.N.N.
You need to have a working dynamic linker.
config FEATURE_SHARED_BUSYBOX
bool "Produce additional busybox binary linked against libbusybox"
default y
depends on BUILD_LIBBUSYBOX
help
Build busybox, dynamically linked against libbusybox.so.N.N.N.
You need to have a working dynamic linker.
### config BUILD_AT_ONCE
### bool "Compile all sources at once"
### default n
### help
### Normally each source-file is compiled with one invocation of
### the compiler.
### If you set this option, all sources are compiled at once.
### This gives the compiler more opportunities to optimize which can
### result in smaller and/or faster binaries.
###
### Setting this option will consume alot of memory, e.g. if you
### enable all applets with all features, gcc uses more than 300MB
### RAM during compilation of busybox.
###
### This option is most likely only beneficial for newer compilers
### such as gcc-4.1 and above.
###
### Say 'N' unless you know what you are doing.
config LFS
bool "Build with Large File Support (for accessing files > 2 GB)"
default y
select FDISK_SUPPORT_LARGE_DISKS
help
If you want to build BusyBox with large file support, then enable
this option. This will have no effect if your kernel or your C
library lacks large file support for large files. Some of the
programs that can benefit from large file support include dd, gzip,
cp, mount, tar, and many others. If you want to access files larger
than 2 Gigabytes, enable this option. Otherwise, leave it set to 'N'.
config CROSS_COMPILER_PREFIX
string "Cross Compiler prefix"
default ""
help
If you want to build BusyBox with a cross compiler, then you
will need to set this to the cross-compiler prefix, for example,
"i386-uclibc-".
Note that CROSS_COMPILE environment variable or
"make CROSS_COMPILE=xxx ..." will override this selection.
Native builds leave this empty.
config EXTRA_CFLAGS
string "Additional CFLAGS"
default ""
help
Additional CFLAGS to pass to the compiler verbatim.
endmenu
menu 'Debugging Options'
config DEBUG
bool "Build BusyBox with extra Debugging symbols"
default n
help
Say Y here if you wish to examine BusyBox internals while applets are
running. This increases the size of the binary considerably, and
should only be used when doing development. If you are doing
development and want to debug BusyBox, answer Y.
Most people should answer N.
config DEBUG_PESSIMIZE
bool "Disable compiler optimizations"
default n
depends on DEBUG
help
The compiler's optimization of source code can eliminate and reorder
code, resulting in an executable that's hard to understand when
stepping through it with a debugger. This switches it off, resulting
in a much bigger executable that more closely matches the source
code.
config WERROR
bool "Abort compilation on any warning"
default n
help
Selecting this will add -Werror to gcc command line.
Most people should answer N.
choice
prompt "Additional debugging library"
default NO_DEBUG_LIB
help
Using an additional debugging library will make BusyBox become
considerable larger and will cause it to run more slowly. You
should always leave this option disabled for production use.
dmalloc support:
----------------
This enables compiling with dmalloc ( http://dmalloc.com/ )
which is an excellent public domain mem leak and malloc problem
detector. To enable dmalloc, before running busybox you will
want to properly set your environment, for example:
export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
The 'debug=' value is generated using the following command
dmalloc -p log-stats -p log-non-free -p log-bad-space \
-p log-elapsed-time -p check-fence -p check-heap \
-p check-lists -p check-blank -p check-funcs -p realloc-copy \
-p allow-free-null
Electric-fence support:
-----------------------
This enables compiling with Electric-fence support. Electric
fence is another very useful malloc debugging library which uses
your computer's virtual memory hardware to detect illegal memory
accesses. This support will make BusyBox be considerable larger
and run slower, so you should leave this option disabled unless
you are hunting a hard to find memory problem.
config NO_DEBUG_LIB
bool "None"
config DMALLOC
bool "Dmalloc"
config EFENCE
bool "Electric-fence"
endchoice
### config PARSE
### bool "Uniform config file parser debugging applet: parse"
endmenu
menu 'Installation Options'
config INSTALL_NO_USR
bool "Don't use /usr"
default n
help
Disable use of /usr. Don't activate this option if you don't know
that you really want this behaviour.
choice
prompt "Applets links"
default INSTALL_APPLET_SYMLINKS
help
Choose how you install applets links.
config INSTALL_APPLET_SYMLINKS
bool "as soft-links"
help
Install applets as soft-links to the busybox binary. This needs some
free inodes on the filesystem, but might help with filesystem
generators that can't cope with hard-links.
config INSTALL_APPLET_HARDLINKS
bool "as hard-links"
help
Install applets as hard-links to the busybox binary. This might
count on a filesystem with few inodes.
config INSTALL_APPLET_SCRIPT_WRAPPERS
bool "as script wrappers"
help
Install applets as script wrappers that call the busybox binary.
config INSTALL_APPLET_DONT
bool "not installed"
depends on FEATURE_INSTALLER || FEATURE_SH_STANDALONE || FEATURE_PREFER_APPLETS
help
Do not install applet links. Useful when using the -install feature
or a standalone shell for rescue purposes.
endchoice
choice
prompt "/bin/sh applet link"
default INSTALL_SH_APPLET_SYMLINK
depends on INSTALL_APPLET_SCRIPT_WRAPPERS
help
Choose how you install /bin/sh applet link.
config INSTALL_SH_APPLET_SYMLINK
bool "as soft-link"
help
Install /bin/sh applet as soft-link to the busybox binary.
config INSTALL_SH_APPLET_HARDLINK
bool "as hard-link"
help
Install /bin/sh applet as hard-link to the busybox binary.
config INSTALL_SH_APPLET_SCRIPT_WRAPPER
bool "as script wrapper"
help
Install /bin/sh applet as script wrapper that call the busybox
binary.
endchoice
config PREFIX
string "BusyBox installation prefix"
default "./_install"
help
Define your directory to install BusyBox files/subdirs in.
endmenu
source libbb/Config.in
endmenu
comment "Applets"
source archival/Config.in
source coreutils/Config.in
source console-tools/Config.in
source debianutils/Config.in
source editors/Config.in
source findutils/Config.in
source init/Config.in
source loginutils/Config.in
source e2fsprogs/Config.in
source modutils/Config.in
source util-linux/Config.in
source miscutils/Config.in
source networking/Config.in
source printutils/Config.in
source mailutils/Config.in
source procps/Config.in
source runit/Config.in
source selinux/Config.in
source shell/Config.in
source sysklogd/Config.in
-137
View File
@@ -1,137 +0,0 @@
Building:
=========
The BusyBox build process is similar to the Linux kernel build:
make menuconfig # This creates a file called ".config"
make # This creates the "busybox" executable
make install # or make CONFIG_PREFIX=/path/from/root install
The full list of configuration and install options is available by typing:
make help
Quick Start:
============
The easy way to try out BusyBox for the first time, without having to install
it, is to enable all features and then use "standalone shell" mode with a
blank command $PATH.
To enable all features, use "make defconfig", which produces the largest
general-purpose configuration. It's allyesconfig minus debugging options,
optional packaging choices, and a few special-purpose features requiring
extra configuration to use. Then enable "standalone shell" feature:
make defconfig
make menuconfig
# select Busybox Settings
# then General Configuration
# then exec prefers applets
# exit back to top level menu
# select Shells
# then Standalone shell
# exit back to top level menu
# exit and save new configuration
# OR
# use these commands to modify .config directly:
sed -e 's/.*FEATURE_PREFER_APPLETS.*/CONFIG_FEATURE_PREFER_APPLETS=y/' -i .config
sed -e 's/.*FEATURE_SH_STANDALONE.*/CONFIG_FEATURE_SH_STANDALONE=y/' -i .config
make
PATH= ./busybox ash
Standalone shell mode causes busybox's built-in command shell to run
any built-in busybox applets directly, without looking for external
programs by that name. Supplying an empty command path (as above) means
the only commands busybox can find are the built-in ones.
Note that the standalone shell requires CONFIG_BUSYBOX_EXEC_PATH
to be set appropriately, depending on whether or not /proc/self/exe is
available or not. If you do not have /proc, then point that config option
to the location of your busybox binary, usually /bin/busybox.
Configuring Busybox:
====================
Busybox is optimized for size, but enabling the full set of functionality
still results in a fairly large executable -- more than 1 megabyte when
statically linked. To save space, busybox can be configured with only the
set of applets needed for each environment. The minimal configuration, with
all applets disabled, produces a 4k executable. (It's useless, but very small.)
The manual configurator "make menuconfig" modifies the existing configuration.
(For systems without ncurses, try "make config" instead.) The two most
interesting starting configurations are "make allnoconfig" (to start with
everything disabled and add just what you need), and "make defconfig" (to
start with everything enabled and remove what you don't need). If menuconfig
is run without an existing configuration, make defconfig will run first to
create a known starting point.
Other starting configurations (mostly used for testing purposes) include
"make allbareconfig" (enables all applets but disables all optional features),
"make allyesconfig" (enables absolutely everything including debug features),
and "make randconfig" (produce a random configuration).
Configuring BusyBox produces a file ".config", which can be saved for future
use. Run "make oldconfig" to bring a .config file from an older version of
busybox up to date.
Installing Busybox:
===================
Busybox is a single executable that can behave like many different commands,
and BusyBox uses the name it was invoked under to determine the desired
behavior. (Try "mv busybox ls" and then "./ls -l".)
Installing busybox consists of creating symlinks (or hardlinks) to the busybox
binary for each applet enabled in busybox, and making sure these symlinks are
in the shell's command $PATH. Running "make install" creates these symlinks,
or "make install-hardlinks" creates hardlinks instead (useful on systems with
a limited number of inodes). This install process uses the file
"busybox.links" (created by make), which contains the list of enabled applets
and the path at which to install them.
Installing links to busybox is not always necessary. The special applet name
"busybox" (or with any optional suffix, such as "busybox-static") uses the
first argument to determine which applet to behave as, for example
"./busybox cat LICENSE". (Running the busybox applet with no arguments gives
a list of all enabled applets.) The standalone shell can also call busybox
applets without links to busybox under other names in the filesystem. You can
also configure a standaone install capability into the busybox base applet,
and then install such links at runtime with one of "busybox --install" (for
hardlinks) or "busybox --install -s" (for symlinks).
If you enabled the busybox shared library feature (libbusybox.so) and want
to run tests without installing, set your LD_LIBRARY_PATH accordingly when
running the executable:
LD_LIBRARY_PATH=`pwd` ./busybox
Building out-of-tree:
=====================
By default, the BusyBox build puts its temporary files in the source tree.
Building from a read-only source tree, or building multiple configurations from
the same source directory, requires the ability to put the temporary files
somewhere else.
To build out of tree, cd to an empty directory and configure busybox from there:
make KBUILD_SRC=/path/to/source -f /path/to/source/Makefile defconfig
make
make install
Alternately, use the O=$BUILDPATH option (with an absolute path) during the
configuration step, as in:
make O=/some/empty/directory allyesconfig
cd /some/empty/directory
make
make CONFIG_PREFIX=. install
More Information:
=================
Se also the busybox FAQ, under the questions "How can I get started using
BusyBox" and "How do I build a BusyBox-based system?" The BusyBox FAQ is
available from http://www.busybox.net/FAQ.html
-1346
View File
File diff suppressed because it is too large. Load diff
-177
View File
@@ -1,177 +0,0 @@
# ==========================================================================
# Build system
# ==========================================================================
busybox.links: $(srctree)/applets/busybox.mkll $(objtree)/include/autoconf.h include/applets.h
$(Q)-$(SHELL) $^ >$@
.PHONY: install
ifeq ($(CONFIG_INSTALL_APPLET_SYMLINKS),y)
INSTALL_OPTS:= --symlinks
endif
ifeq ($(CONFIG_INSTALL_APPLET_HARDLINKS),y)
INSTALL_OPTS:= --hardlinks
endif
ifeq ($(CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS),y)
ifeq ($(CONFIG_INSTALL_SH_APPLET_SYMLINK),y)
INSTALL_OPTS:= --sw-sh-sym
endif
ifeq ($(CONFIG_INSTALL_SH_APPLET_HARDLINK),y)
INSTALL_OPTS:= --sw-sh-hard
endif
ifeq ($(CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER),y)
INSTALL_OPTS:= --scriptwrapper
endif
endif
install: $(srctree)/applets/install.sh busybox busybox.links
$(Q)DO_INSTALL_LIBS="$(strip $(LIBBUSYBOX_SONAME) $(DO_INSTALL_LIBS))" \
$(SHELL) $< $(CONFIG_PREFIX) $(INSTALL_OPTS)
ifeq ($(strip $(CONFIG_FEATURE_SUID)),y)
@echo
@echo
@echo --------------------------------------------------
@echo You will probably need to make your busybox binary
@echo setuid root to ensure all configured applets will
@echo work properly.
@echo --------------------------------------------------
@echo
endif
uninstall: busybox.links
rm -f $(CONFIG_PREFIX)/bin/busybox
for i in `cat busybox.links` ; do rm -f $(CONFIG_PREFIX)$$i; done
ifneq ($(strip $(DO_INSTALL_LIBS)),n)
for i in $(LIBBUSYBOX_SONAME) $(DO_INSTALL_LIBS); do \
rm -f $(CONFIG_PREFIX)$$i; \
done
endif
# Not very elegant: copies testsuite to objdir...
# (cp -pPR is POSIX-compliant (cp -dpR or cp -a would not be))
.PHONY: check
.PHONY: test
check test: busybox busybox.links
test -d $(objtree)/testsuite || cp -pPR $(srctree)/testsuite $(objtree)
bindir=$(objtree) srcdir=$(srctree)/testsuite \
$(SHELL) -c "cd $(objtree)/testsuite && $(srctree)/testsuite/runtest $(if $(KBUILD_VERBOSE:0=),-v)"
.PHONY: release
release: distclean
cd ..; \
rm -r -f busybox-$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION); \
cp -pPR busybox busybox-$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) && { \
find busybox-$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)/ -type d \
-name .svn \
-print \
-exec rm -r -f {} \; ; \
find busybox-$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)/ -type d \
-name .git \
-print \
-exec rm -r -f {} \; ; \
find busybox-$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)/ -type f \
-name .\#* \
-print \
-exec rm -f {} \; ; \
tar -czf busybox-$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION).tar.gz \
busybox-$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)/ ; }
.PHONY: checkhelp
checkhelp:
$(Q)$(srctree)/scripts/checkhelp.awk \
$(patsubst %,$(srctree)/%,$(wildcard $(patsubst %,%/Config.in,$(busybox-dirs) ./)))
.PHONY: sizes
sizes: busybox_unstripped
$(NM) --size-sort $(<)
.PHONY: bloatcheck
bloatcheck: busybox_old busybox_unstripped
@$(srctree)/scripts/bloat-o-meter busybox_old busybox_unstripped
@$(CROSS_COMPILE)size busybox_old busybox_unstripped
.PHONY: baseline
baseline: busybox_unstripped
@mv busybox_unstripped busybox_old
.PHONY: objsizes
objsizes: busybox_unstripped
$(srctree)/scripts/objsizes
.PHONY: stksizes
stksizes: busybox_unstripped
$(CROSS_COMPILE)objdump -d busybox_unstripped | $(srctree)/scripts/checkstack.pl $(ARCH) | uniq
.PHONY: bigdata
bigdata: busybox_unstripped
$(CROSS_COMPILE)nm --size-sort busybox_unstripped | grep -vi ' [trw] '
# Documentation Targets
.PHONY: doc
doc: docs/busybox.pod docs/BusyBox.txt docs/BusyBox.1 docs/BusyBox.html
# FIXME: Doesn't belong here
cmd_doc =
quiet_cmd_doc = $(Q)echo " DOC $(@F)"
silent_cmd_doc =
disp_doc = $($(quiet)cmd_doc)
# sed adds newlines after "Options:" etc,
# this is needed in order to get good BusyBox.{1,txt,html}
docs/busybox.pod: $(srctree)/docs/busybox_header.pod \
include/usage.h \
$(srctree)/docs/busybox_footer.pod \
applets/usage_pod
$(disp_doc)
$(Q)-mkdir -p docs
$(Q)-( \
cat $(srctree)/docs/busybox_header.pod; \
applets/usage_pod | sed 's/^[A-Za-z][A-Za-z ]*[a-z]:$$/&\n/'; \
cat $(srctree)/docs/busybox_footer.pod; \
) > docs/busybox.pod
docs/BusyBox.txt: docs/busybox.pod
$(disp_doc)
$(Q)-mkdir -p docs
$(Q)-pod2text $< > $@
docs/BusyBox.1: docs/busybox.pod
$(disp_doc)
$(Q)-mkdir -p docs
$(Q)-pod2man --center=BusyBox --release="version $(KERNELVERSION)" $< > $@
docs/BusyBox.html: docs/busybox.net/BusyBox.html
$(disp_doc)
$(Q)-mkdir -p docs
$(Q)-rm -f docs/BusyBox.html
$(Q)-cp docs/busybox.net/BusyBox.html docs/BusyBox.html
docs/busybox.net/BusyBox.html: docs/busybox.pod
$(Q)-mkdir -p docs/busybox.net
$(Q)-pod2html --noindex $< > $@
$(Q)-rm -f pod2htm*
# documentation, cross-reference
# Modern distributions already ship synopsis packages (e.g. debian)
# If you have an old distribution go to http://synopsis.fresco.org/
syn_tgt = $(wildcard $(patsubst %,%/*.c,$(busybox-alldirs)))
syn = $(patsubst %.c, %.syn, $(syn_tgt))
comma:= ,
brace_open:= (
brace_close:= )
SYN_CPPFLAGS := $(strip $(CPPFLAGS) $(EXTRA_CPPFLAGS))
SYN_CPPFLAGS := $(subst $(brace_open),\$(brace_open),$(SYN_CPPFLAGS))
SYN_CPPFLAGS := $(subst $(brace_close),\$(brace_close),$(SYN_CPPFLAGS))
#SYN_CPPFLAGS := $(subst ",\",$(SYN_CPPFLAGS))
#")
#SYN_CPPFLAGS := [$(patsubst %,'%'$(comma),$(SYN_CPPFLAGS))'']
%.syn: %.c
synopsis -p C -l Comments.SSDFilter,Comments.Previous -Wp,preprocess=True,cppflags="'$(SYN_CPPFLAGS)'" -o $@ $<
.PHONY: html
html: $(syn)
synopsis -f HTML -Wf,title="'BusyBox Documentation'" -o $@ $^
-include $(srctree)/Makefile.local
-132
View File
@@ -1,132 +0,0 @@
# ==========================================================================
# Build system
# ==========================================================================
BB_VER = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
export BB_VER
SKIP_STRIP = n
# -std=gnu99 needed for [U]LLONG_MAX on some systems
CPPFLAGS += $(call cc-option,-std=gnu99,)
CPPFLAGS += \
-Iinclude -Ilibbb \
$(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include -I$(srctree)/libbb) \
-include include/autoconf.h \
-D_GNU_SOURCE -DNDEBUG \
$(if $(CONFIG_LFS),-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64) \
-D"BB_VER=KBUILD_STR($(BB_VER))" -DBB_BT=AUTOCONF_TIMESTAMP
CFLAGS += $(call cc-option,-Wall,)
CFLAGS += $(call cc-option,-Wshadow,)
CFLAGS += $(call cc-option,-Wwrite-strings,)
CFLAGS += $(call cc-option,-Wundef,)
CFLAGS += $(call cc-option,-Wstrict-prototypes,)
CFLAGS += $(call cc-option,-Wunused -Wunused-parameter,)
CFLAGS += $(call cc-option,-Wunused-function -Wunused-value,)
CFLAGS += $(call cc-option,-Wmissing-prototypes -Wmissing-declarations,)
# warn about C99 declaration after statement
CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
# If you want to add more -Wsomething above, make sure that it is
# still possible to build bbox without warnings.
ifeq ($(CONFIG_WERROR),y)
CFLAGS += $(call cc-option,-Werror,)
## TODO:
## gcc version 4.4.0 20090506 (Red Hat 4.4.0-4) (GCC) is a PITA:
## const char *ptr; ... off_t v = *(off_t*)ptr; -> BOOM
## and no easy way to convince it to shut the hell up.
## We have a lot of such things all over the place.
## Classic *(off_t*)(void*)ptr does not work,
## and I am unwilling to do crazy gcc specific ({ void *ppp = ...; })
## stuff in macros. This would obfuscate the code too much.
## Maybe try __attribute__((__may_alias__))?
#CFLAGS += $(call cc-ifversion, -eq, 0404, -fno-strict-aliasing)
endif
# gcc 3.x emits bogus "old style proto" warning on find.c:alloc_action()
CFLAGS += $(call cc-ifversion, -ge, 0400, -Wold-style-definition)
CFLAGS += $(call cc-option,-fno-builtin-strlen -finline-limit=0 -fomit-frame-pointer -ffunction-sections -fdata-sections,)
# -fno-guess-branch-probability: prohibit pseudo-random guessing
# of branch probabilities (hopefully makes bloatcheck more stable):
CFLAGS += $(call cc-option,-fno-guess-branch-probability,)
CFLAGS += $(call cc-option,-funsigned-char -static-libgcc,)
CFLAGS += $(call cc-option,-falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1,)
# FIXME: These warnings are at least partially to be concerned about and should
# be fixed..
#CFLAGS += $(call cc-option,-Wconversion,)
ifneq ($(CONFIG_DEBUG),y)
CFLAGS += $(call cc-option,-Os,)
else
CFLAGS += $(call cc-option,-g,)
#CFLAGS += "-D_FORTIFY_SOURCE=2"
ifeq ($(CONFIG_DEBUG_PESSIMIZE),y)
CFLAGS += $(call cc-option,-O0,)
else
CFLAGS += $(call cc-option,-Os,)
endif
endif
# If arch/$(ARCH)/Makefile did not override it (with, say, -fPIC)...
ARCH_FPIC ?= -fpic
ARCH_FPIE ?= -fpie
ARCH_PIE ?= -pie
ifeq ($(CONFIG_BUILD_LIBBUSYBOX),y)
# on i386: 14% smaller libbusybox.so
# (code itself is 9% bigger, we save on relocs/PLT/GOT)
CFLAGS += $(ARCH_FPIC)
# and another 4% reduction of libbusybox.so:
# (external entry points must be marked EXTERNALLY_VISIBLE)
CFLAGS += $(call cc-option,-fvisibility=hidden)
endif
ifeq ($(CONFIG_STATIC),y)
CFLAGS_busybox += -static
endif
ifeq ($(CONFIG_PIE),y)
CFLAGS_busybox += $(ARCH_PIE)
CFLAGS += $(ARCH_FPIE)
endif
ifneq ($(CONFIG_EXTRA_CFLAGS),)
CFLAGS += $(strip $(subst ",,$(CONFIG_EXTRA_CFLAGS)))
#"))
endif
LDLIBS += m crypt
ifeq ($(CONFIG_PAM),y)
LDLIBS += pam pam_misc
endif
ifeq ($(CONFIG_SELINUX),y)
LDLIBS += selinux sepol
endif
ifeq ($(CONFIG_EFENCE),y)
LDLIBS += efence
endif
ifeq ($(CONFIG_DMALLOC),y)
LDLIBS += dmalloc
endif
# If a flat binary should be built, CFLAGS_busybox="-elf2flt"
# env var should be set for make invocation.
# Here we check whether CFLAGS_busybox indeed contains that flag.
# (For historical reasons, we also check LDFLAGS, which doesn't
# seem to be entirely correct variable to put "-elf2flt" into).
W_ELF2FLT = -elf2flt
ifneq (,$(findstring $(W_ELF2FLT),$(LDFLAGS) $(CFLAGS_busybox)))
SKIP_STRIP = y
endif
# Busybox is a stack-fatty so make sure we increase default size
# TODO: use "make stksizes" to find & fix big stack users
# (we stole scripts/checkstack.pl from the kernel... thanks guys!)
# Reduced from 20k to 16k in 1.9.0.
FLTFLAGS += -s 16000
-44
View File
@@ -1,44 +0,0 @@
# ==========================================================================
# Build system
# ==========================================================================
help:
@echo 'Cleaning:'
@echo ' clean - delete temporary files created by build'
@echo ' distclean - delete all non-source files (including .config)'
@echo ' doc-clean - delete all generated documentation'
@echo
@echo 'Build:'
@echo ' all - Executable and documentation'
@echo ' busybox - the swiss-army executable'
@echo ' doc - docs/BusyBox.{txt,html,1}'
@echo ' html - create html-based cross-reference'
@echo
@echo 'Configuration:'
@echo ' allnoconfig - disable all symbols in .config'
@echo ' allyesconfig - enable all symbols in .config (see defconfig)'
@echo ' config - text based configurator (of last resort)'
@echo ' defconfig - set .config to largest generic configuration'
@echo ' menuconfig - interactive curses-based configurator'
@echo ' oldconfig - resolve any unresolved symbols in .config'
@echo ' hosttools - build sed for the host.'
@echo ' You can use these commands if the commands on the host'
@echo ' is unusable. Afterwards use it like:'
@echo ' make SED="$(objtree)/sed"'
@echo
@echo 'Installation:'
@echo ' install - install busybox into CONFIG_PREFIX'
@echo ' uninstall'
@echo
@echo 'Development:'
@echo ' baseline - create busybox_old for bloatcheck.'
@echo ' bloatcheck - show size difference between old and new versions'
@echo ' check - run the test suite for all applets'
@echo ' checkhelp - check for missing help-entries in Config.in'
@echo ' randconfig - generate a random configuration'
@echo ' release - create a distribution tarball'
@echo ' sizes - show size of all enabled busybox symbols'
@echo ' objsizes - show size of each .o object built'
@echo ' bigdata - show data objects, biggest first'
@echo ' stksizes - show stack users, biggest first'
@echo
-928
View File
@@ -1,928 +0,0 @@
#
# Automatically generated make config: don't edit
# Busybox version: 1.16.0
# Wed Jan 27 21:01:26 2010
#
CONFIG_HAVE_DOT_CONFIG=y
#
# Busybox Settings
#
#
# General Configuration
#
CONFIG_DESKTOP=y
CONFIG_EXTRA_COMPAT=y
CONFIG_INCLUDE_SUSv2=y
# CONFIG_USE_PORTABLE_CODE is not set
CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
CONFIG_SHOW_USAGE=y
CONFIG_FEATURE_VERBOSE_USAGE=y
CONFIG_FEATURE_COMPRESS_USAGE=y
CONFIG_FEATURE_INSTALLER=y
# CONFIG_LOCALE_SUPPORT is not set
# CONFIG_UNICODE_SUPPORT is not set
# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set
CONFIG_LONG_OPTS=y
CONFIG_FEATURE_DEVPTS=y
# CONFIG_FEATURE_CLEAN_UP is not set
CONFIG_FEATURE_PIDFILE=y
CONFIG_FEATURE_SUID=y
CONFIG_FEATURE_SUID_CONFIG=y
CONFIG_FEATURE_SUID_CONFIG_QUIET=y
CONFIG_SELINUX=y
CONFIG_FEATURE_PREFER_APPLETS=y
CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
CONFIG_FEATURE_SYSLOG=y
CONFIG_FEATURE_HAVE_RPC=y
#
# Build Options
#
# CONFIG_STATIC is not set
# CONFIG_PIE is not set
CONFIG_NOMMU=y
# CONFIG_BUILD_LIBBUSYBOX is not set
# CONFIG_FEATURE_INDIVIDUAL is not set
# CONFIG_FEATURE_SHARED_BUSYBOX is not set
CONFIG_LFS=y
CONFIG_CROSS_COMPILER_PREFIX=""
CONFIG_EXTRA_CFLAGS=""
#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_DEBUG_PESSIMIZE is not set
# CONFIG_WERROR is not set
CONFIG_NO_DEBUG_LIB=y
# CONFIG_DMALLOC is not set
# CONFIG_EFENCE is not set
#
# Installation Options
#
# CONFIG_INSTALL_NO_USR is not set
CONFIG_INSTALL_APPLET_SYMLINKS=y
# CONFIG_INSTALL_APPLET_HARDLINKS is not set
# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
# CONFIG_INSTALL_APPLET_DONT is not set
# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
CONFIG_PREFIX="./_install"
#
# Busybox Library Tuning
#
CONFIG_PASSWORD_MINLEN=6
CONFIG_MD5_SIZE_VS_SPEED=2
CONFIG_FEATURE_FAST_TOP=y
CONFIG_FEATURE_ETC_NETWORKS=y
CONFIG_FEATURE_EDITING=y
CONFIG_FEATURE_EDITING_MAX_LEN=1024
CONFIG_FEATURE_EDITING_VI=y
CONFIG_FEATURE_EDITING_HISTORY=15
# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
CONFIG_FEATURE_TAB_COMPLETION=y
CONFIG_FEATURE_USERNAME_COMPLETION=y
CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
CONFIG_FEATURE_EDITING_ASK_TERMINAL=y
CONFIG_FEATURE_NON_POSIX_CP=y
CONFIG_FEATURE_VERBOSE_CP_MESSAGE=y
CONFIG_FEATURE_COPYBUF_KB=4
CONFIG_MONOTONIC_SYSCALL=y
CONFIG_IOCTL_HEX2STR_ERROR=y
CONFIG_FEATURE_HWIB=y
#
# Applets
#
#
# Archival Utilities
#
CONFIG_FEATURE_SEAMLESS_LZMA=y
CONFIG_FEATURE_SEAMLESS_BZ2=y
CONFIG_FEATURE_SEAMLESS_GZ=y
CONFIG_FEATURE_SEAMLESS_Z=y
CONFIG_AR=y
CONFIG_FEATURE_AR_LONG_FILENAMES=y
CONFIG_BUNZIP2=y
CONFIG_BZIP2=y
CONFIG_CPIO=y
CONFIG_FEATURE_CPIO_O=y
CONFIG_FEATURE_CPIO_P=y
CONFIG_DPKG=y
CONFIG_DPKG_DEB=y
CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY=y
CONFIG_GUNZIP=y
CONFIG_GZIP=y
CONFIG_FEATURE_GZIP_LONG_OPTIONS=y
CONFIG_LZOP=y
CONFIG_LZOP_COMPR_HIGH=y
CONFIG_RPM2CPIO=y
CONFIG_RPM=y
CONFIG_TAR=y
CONFIG_FEATURE_TAR_CREATE=y
CONFIG_FEATURE_TAR_AUTODETECT=y
CONFIG_FEATURE_TAR_FROM=y
CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
CONFIG_FEATURE_TAR_LONG_OPTIONS=y
CONFIG_FEATURE_TAR_UNAME_GNAME=y
CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y
CONFIG_UNCOMPRESS=y
CONFIG_UNLZMA=y
CONFIG_FEATURE_LZMA_FAST=y
CONFIG_UNZIP=y
#
# Coreutils
#
CONFIG_BASENAME=y
CONFIG_CAL=y
CONFIG_CAT=y
CONFIG_CATV=y
CONFIG_CHGRP=y
CONFIG_CHMOD=y
CONFIG_CHOWN=y
CONFIG_FEATURE_CHOWN_LONG_OPTIONS=y
CONFIG_CHROOT=y
CONFIG_CKSUM=y
CONFIG_COMM=y
CONFIG_CP=y
CONFIG_FEATURE_CP_LONG_OPTIONS=y
CONFIG_CUT=y
CONFIG_DATE=y
CONFIG_FEATURE_DATE_ISOFMT=y
CONFIG_FEATURE_DATE_COMPAT=y
CONFIG_DD=y
CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
CONFIG_FEATURE_DD_THIRD_STATUS_LINE=y
CONFIG_FEATURE_DD_IBS_OBS=y
CONFIG_DF=y
CONFIG_FEATURE_DF_FANCY=y
CONFIG_DIRNAME=y
CONFIG_DOS2UNIX=y
CONFIG_UNIX2DOS=y
CONFIG_DU=y
CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
CONFIG_ECHO=y
CONFIG_FEATURE_FANCY_ECHO=y
CONFIG_ENV=y
CONFIG_FEATURE_ENV_LONG_OPTIONS=y
CONFIG_EXPAND=y
CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
CONFIG_EXPR=y
CONFIG_EXPR_MATH_SUPPORT_64=y
CONFIG_FALSE=y
CONFIG_FOLD=y
CONFIG_FSYNC=y
CONFIG_HEAD=y
CONFIG_FEATURE_FANCY_HEAD=y
CONFIG_HOSTID=y
CONFIG_ID=y
CONFIG_INSTALL=y
CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
CONFIG_LENGTH=y
CONFIG_LN=y
CONFIG_LOGNAME=y
CONFIG_LS=y
CONFIG_FEATURE_LS_FILETYPES=y
CONFIG_FEATURE_LS_FOLLOWLINKS=y
CONFIG_FEATURE_LS_RECURSIVE=y
CONFIG_FEATURE_LS_SORTFILES=y
CONFIG_FEATURE_LS_TIMESTAMPS=y
CONFIG_FEATURE_LS_USERNAME=y
CONFIG_FEATURE_LS_COLOR=y
CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
CONFIG_MD5SUM=y
CONFIG_MKDIR=y
CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
CONFIG_MKFIFO=y
CONFIG_MKNOD=y
CONFIG_MV=y
CONFIG_FEATURE_MV_LONG_OPTIONS=y
CONFIG_NICE=y
CONFIG_NOHUP=y
CONFIG_OD=y
CONFIG_PRINTENV=y
CONFIG_PRINTF=y
CONFIG_PWD=y
CONFIG_READLINK=y
CONFIG_FEATURE_READLINK_FOLLOW=y
CONFIG_REALPATH=y
CONFIG_RM=y
CONFIG_RMDIR=y
CONFIG_FEATURE_RMDIR_LONG_OPTIONS=y
CONFIG_SEQ=y
CONFIG_SHA1SUM=y
CONFIG_SHA256SUM=y
CONFIG_SHA512SUM=y
CONFIG_SLEEP=y
CONFIG_FEATURE_FANCY_SLEEP=y
CONFIG_FEATURE_FLOAT_SLEEP=y
CONFIG_SORT=y
CONFIG_FEATURE_SORT_BIG=y
CONFIG_SPLIT=y
CONFIG_FEATURE_SPLIT_FANCY=y
CONFIG_STAT=y
CONFIG_FEATURE_STAT_FORMAT=y
CONFIG_STTY=y
CONFIG_SUM=y
CONFIG_SYNC=y
CONFIG_TAC=y
CONFIG_TAIL=y
CONFIG_FEATURE_FANCY_TAIL=y
CONFIG_TEE=y
CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
CONFIG_TEST=y
CONFIG_FEATURE_TEST_64=y
CONFIG_TOUCH=y
CONFIG_TR=y
CONFIG_FEATURE_TR_CLASSES=y
CONFIG_FEATURE_TR_EQUIV=y
CONFIG_TRUE=y
CONFIG_TTY=y
CONFIG_UNAME=y
CONFIG_UNEXPAND=y
CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
CONFIG_UNIQ=y
CONFIG_USLEEP=y
CONFIG_UUDECODE=y
CONFIG_UUENCODE=y
CONFIG_WC=y
CONFIG_FEATURE_WC_LARGE=y
CONFIG_WHO=y
CONFIG_WHOAMI=y
CONFIG_YES=y
#
# Common options for cp and mv
#
CONFIG_FEATURE_PRESERVE_HARDLINKS=y
#
# Common options for ls, more and telnet
#
CONFIG_FEATURE_AUTOWIDTH=y
#
# Common options for df, du, ls
#
CONFIG_FEATURE_HUMAN_READABLE=y
#
# Common options for md5sum, sha1sum, sha256sum, sha512sum
#
CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
#
# Console Utilities
#
CONFIG_CHVT=y
CONFIG_CLEAR=y
CONFIG_DEALLOCVT=y
CONFIG_DUMPKMAP=y
CONFIG_KBD_MODE=y
CONFIG_LOADFONT=y
CONFIG_LOADKMAP=y
CONFIG_OPENVT=y
CONFIG_RESET=y
CONFIG_RESIZE=y
CONFIG_FEATURE_RESIZE_PRINT=y
CONFIG_SETCONSOLE=y
CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
CONFIG_SETFONT=y
CONFIG_FEATURE_SETFONT_TEXTUAL_MAP=y
CONFIG_DEFAULT_SETFONT_DIR=""
CONFIG_SETKEYCODES=y
CONFIG_SETLOGCONS=y
CONFIG_SHOWKEY=y
#
# Debian Utilities
#
CONFIG_MKTEMP=y
CONFIG_PIPE_PROGRESS=y
CONFIG_RUN_PARTS=y
CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
CONFIG_FEATURE_RUN_PARTS_FANCY=y
CONFIG_START_STOP_DAEMON=y
CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
CONFIG_WHICH=y
#
# Editors
#
CONFIG_AWK=y
CONFIG_FEATURE_AWK_LIBM=y
CONFIG_CMP=y
CONFIG_DIFF=y
CONFIG_FEATURE_DIFF_LONG_OPTIONS=y
CONFIG_FEATURE_DIFF_DIR=y
CONFIG_ED=y
CONFIG_PATCH=y
CONFIG_SED=y
CONFIG_VI=y
CONFIG_FEATURE_VI_MAX_LEN=4096
CONFIG_FEATURE_VI_8BIT=y
CONFIG_FEATURE_VI_COLON=y
CONFIG_FEATURE_VI_YANKMARK=y
CONFIG_FEATURE_VI_SEARCH=y
CONFIG_FEATURE_VI_USE_SIGNALS=y
CONFIG_FEATURE_VI_DOT_CMD=y
CONFIG_FEATURE_VI_READONLY=y
CONFIG_FEATURE_VI_SETOPTS=y
CONFIG_FEATURE_VI_SET=y
CONFIG_FEATURE_VI_WIN_RESIZE=y
CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
CONFIG_FEATURE_ALLOW_EXEC=y
#
# Finding Utilities
#
CONFIG_FIND=y
CONFIG_FEATURE_FIND_PRINT0=y
CONFIG_FEATURE_FIND_MTIME=y
CONFIG_FEATURE_FIND_MMIN=y
CONFIG_FEATURE_FIND_PERM=y
CONFIG_FEATURE_FIND_TYPE=y
CONFIG_FEATURE_FIND_XDEV=y
CONFIG_FEATURE_FIND_MAXDEPTH=y
CONFIG_FEATURE_FIND_NEWER=y
CONFIG_FEATURE_FIND_INUM=y
CONFIG_FEATURE_FIND_EXEC=y
CONFIG_FEATURE_FIND_USER=y
CONFIG_FEATURE_FIND_GROUP=y
CONFIG_FEATURE_FIND_NOT=y
CONFIG_FEATURE_FIND_DEPTH=y
CONFIG_FEATURE_FIND_PAREN=y
CONFIG_FEATURE_FIND_SIZE=y
CONFIG_FEATURE_FIND_PRUNE=y
CONFIG_FEATURE_FIND_DELETE=y
CONFIG_FEATURE_FIND_PATH=y
CONFIG_FEATURE_FIND_REGEX=y
CONFIG_FEATURE_FIND_CONTEXT=y
CONFIG_FEATURE_FIND_LINKS=y
CONFIG_GREP=y
CONFIG_FEATURE_GREP_EGREP_ALIAS=y
CONFIG_FEATURE_GREP_FGREP_ALIAS=y
CONFIG_FEATURE_GREP_CONTEXT=y
CONFIG_XARGS=y
CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
#
# Init Utilities
#
CONFIG_INIT=y
CONFIG_FEATURE_USE_INITTAB=y
CONFIG_FEATURE_KILL_REMOVED=y
CONFIG_FEATURE_KILL_DELAY=1
CONFIG_FEATURE_INIT_SCTTY=y
CONFIG_FEATURE_INIT_SYSLOG=y
CONFIG_FEATURE_EXTRA_QUIET=y
CONFIG_FEATURE_INIT_COREDUMPS=y
CONFIG_FEATURE_INITRD=y
CONFIG_HALT=y
# CONFIG_FEATURE_CALL_TELINIT is not set
CONFIG_TELINIT_PATH=""
CONFIG_MESG=y
#
# Login/Password Management Utilities
#
CONFIG_FEATURE_SHADOWPASSWDS=y
CONFIG_USE_BB_PWD_GRP=y
CONFIG_USE_BB_SHADOW=y
CONFIG_USE_BB_CRYPT=y
CONFIG_USE_BB_CRYPT_SHA=y
CONFIG_ADDGROUP=y
CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS=y
CONFIG_FEATURE_ADDUSER_TO_GROUP=y
CONFIG_DELGROUP=y
CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
CONFIG_FEATURE_CHECK_NAMES=y
CONFIG_ADDUSER=y
CONFIG_FEATURE_ADDUSER_LONG_OPTIONS=y
CONFIG_FIRST_SYSTEM_ID=100
CONFIG_LAST_SYSTEM_ID=999
CONFIG_DELUSER=y
CONFIG_GETTY=y
CONFIG_FEATURE_UTMP=y
CONFIG_FEATURE_WTMP=y
CONFIG_LOGIN=y
# CONFIG_PAM is not set
CONFIG_LOGIN_SCRIPTS=y
CONFIG_FEATURE_NOLOGIN=y
CONFIG_FEATURE_SECURETTY=y
CONFIG_PASSWD=y
CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
CONFIG_CRYPTPW=y
CONFIG_CHPASSWD=y
CONFIG_SU=y
CONFIG_FEATURE_SU_SYSLOG=y
CONFIG_FEATURE_SU_CHECKS_SHELLS=y
CONFIG_SULOGIN=y
CONFIG_VLOCK=y
#
# Linux Ext2 FS Progs
#
CONFIG_CHATTR=y
CONFIG_FSCK=y
CONFIG_LSATTR=y
#
# Linux Module Utilities
#
CONFIG_MODPROBE_SMALL=y
CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE=y
CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED=y
# CONFIG_INSMOD is not set
# CONFIG_RMMOD is not set
# CONFIG_LSMOD is not set
# CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT is not set
# CONFIG_MODPROBE is not set
# CONFIG_FEATURE_MODPROBE_BLACKLIST is not set
# CONFIG_DEPMOD is not set
#
# Options common to multiple modutils
#
# CONFIG_FEATURE_2_4_MODULES is not set
CONFIG_FEATURE_INSMOD_TRY_MMAP=y
# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
# CONFIG_FEATURE_CHECK_TAINTED_MODULE is not set
# CONFIG_FEATURE_MODUTILS_ALIAS is not set
# CONFIG_FEATURE_MODUTILS_SYMBOLS is not set
CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
#
# Linux System Utilities
#
# CONFIG_ACPID is not set
# CONFIG_FEATURE_ACPID_COMPAT is not set
CONFIG_BLKID=y
CONFIG_DMESG=y
CONFIG_FEATURE_DMESG_PRETTY=y
CONFIG_FBSET=y
CONFIG_FEATURE_FBSET_FANCY=y
CONFIG_FEATURE_FBSET_READMODE=y
CONFIG_FDFLUSH=y
CONFIG_FDFORMAT=y
CONFIG_FDISK=y
CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
CONFIG_FEATURE_FDISK_WRITABLE=y
CONFIG_FEATURE_AIX_LABEL=y
CONFIG_FEATURE_SGI_LABEL=y
CONFIG_FEATURE_SUN_LABEL=y
CONFIG_FEATURE_OSF_LABEL=y
CONFIG_FEATURE_FDISK_ADVANCED=y
CONFIG_FINDFS=y
CONFIG_FREERAMDISK=y
CONFIG_FSCK_MINIX=y
CONFIG_MKFS_EXT2=y
CONFIG_MKFS_MINIX=y
#
# Minix filesystem support
#
CONFIG_FEATURE_MINIX2=y
CONFIG_MKFS_REISER=y
CONFIG_MKFS_VFAT=y
CONFIG_GETOPT=y
CONFIG_FEATURE_GETOPT_LONG=y
CONFIG_HEXDUMP=y
CONFIG_FEATURE_HEXDUMP_REVERSE=y
CONFIG_HD=y
CONFIG_HWCLOCK=y
CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
CONFIG_IPCRM=y
CONFIG_IPCS=y
CONFIG_LOSETUP=y
CONFIG_LSPCI=y
CONFIG_LSUSB=y
CONFIG_MDEV=y
CONFIG_FEATURE_MDEV_CONF=y
CONFIG_FEATURE_MDEV_RENAME=y
CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
CONFIG_FEATURE_MDEV_EXEC=y
CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
CONFIG_MKSWAP=y
CONFIG_FEATURE_MKSWAP_UUID=y
CONFIG_MORE=y
CONFIG_FEATURE_USE_TERMIOS=y
CONFIG_VOLUMEID=y
CONFIG_FEATURE_VOLUMEID_EXT=y
CONFIG_FEATURE_VOLUMEID_BTRFS=y
CONFIG_FEATURE_VOLUMEID_REISERFS=y
CONFIG_FEATURE_VOLUMEID_FAT=y
CONFIG_FEATURE_VOLUMEID_HFS=y
CONFIG_FEATURE_VOLUMEID_JFS=y
CONFIG_FEATURE_VOLUMEID_XFS=y
CONFIG_FEATURE_VOLUMEID_NTFS=y
CONFIG_FEATURE_VOLUMEID_ISO9660=y
CONFIG_FEATURE_VOLUMEID_UDF=y
CONFIG_FEATURE_VOLUMEID_LUKS=y
CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
CONFIG_FEATURE_VOLUMEID_CRAMFS=y
CONFIG_FEATURE_VOLUMEID_ROMFS=y
CONFIG_FEATURE_VOLUMEID_SYSV=y
CONFIG_FEATURE_VOLUMEID_OCFS2=y
CONFIG_FEATURE_VOLUMEID_LINUXRAID=y
CONFIG_MOUNT=y
CONFIG_FEATURE_MOUNT_FAKE=y
CONFIG_FEATURE_MOUNT_VERBOSE=y
CONFIG_FEATURE_MOUNT_HELPERS=y
CONFIG_FEATURE_MOUNT_LABEL=y
CONFIG_FEATURE_MOUNT_NFS=y
CONFIG_FEATURE_MOUNT_CIFS=y
CONFIG_FEATURE_MOUNT_FLAGS=y
CONFIG_FEATURE_MOUNT_FSTAB=y
CONFIG_PIVOT_ROOT=y
CONFIG_RDATE=y
CONFIG_RDEV=y
CONFIG_READPROFILE=y
CONFIG_RTCWAKE=y
CONFIG_SCRIPT=y
CONFIG_SCRIPTREPLAY=y
CONFIG_SETARCH=y
CONFIG_SWAPONOFF=y
CONFIG_FEATURE_SWAPON_PRI=y
CONFIG_SWITCH_ROOT=y
CONFIG_UMOUNT=y
CONFIG_FEATURE_UMOUNT_ALL=y
#
# Common options for mount/umount
#
CONFIG_FEATURE_MOUNT_LOOP=y
# CONFIG_FEATURE_MTAB_SUPPORT is not set
#
# Miscellaneous Utilities
#
CONFIG_ADJTIMEX=y
CONFIG_BBCONFIG=y
CONFIG_BEEP=y
CONFIG_FEATURE_BEEP_FREQ=4000
CONFIG_FEATURE_BEEP_LENGTH_MS=30
CONFIG_CHAT=y
CONFIG_FEATURE_CHAT_NOFAIL=y
CONFIG_FEATURE_CHAT_TTY_HIFI=y
CONFIG_FEATURE_CHAT_IMPLICIT_CR=y
CONFIG_FEATURE_CHAT_SWALLOW_OPTS=y
CONFIG_FEATURE_CHAT_SEND_ESCAPES=y
CONFIG_FEATURE_CHAT_VAR_ABORT_LEN=y
CONFIG_FEATURE_CHAT_CLR_ABORT=y
CONFIG_CHRT=y
CONFIG_CROND=y
CONFIG_FEATURE_CROND_D=y
CONFIG_FEATURE_CROND_CALL_SENDMAIL=y
CONFIG_FEATURE_CROND_DIR="/var/spool/cron"
CONFIG_CRONTAB=y
CONFIG_DC=y
CONFIG_FEATURE_DC_LIBM=y
# CONFIG_DEVFSD is not set
# CONFIG_DEVFSD_MODLOAD is not set
# CONFIG_DEVFSD_FG_NP is not set
# CONFIG_DEVFSD_VERBOSE is not set
# CONFIG_FEATURE_DEVFS is not set
CONFIG_DEVMEM=y
CONFIG_EJECT=y
CONFIG_FEATURE_EJECT_SCSI=y
CONFIG_FBSPLASH=y
CONFIG_FLASHCP=y
# CONFIG_FLASH_LOCK is not set
# CONFIG_FLASH_UNLOCK is not set
# CONFIG_FLASH_ERASEALL is not set
CONFIG_IONICE=y
CONFIG_INOTIFYD=y
CONFIG_LAST=y
CONFIG_FEATURE_LAST_SMALL=y
# CONFIG_FEATURE_LAST_FANCY is not set
CONFIG_LESS=y
CONFIG_FEATURE_LESS_MAXLINES=9999999
CONFIG_FEATURE_LESS_BRACKETS=y
CONFIG_FEATURE_LESS_FLAGS=y
CONFIG_FEATURE_LESS_MARKS=y
CONFIG_FEATURE_LESS_REGEXP=y
CONFIG_FEATURE_LESS_WINCH=y
CONFIG_FEATURE_LESS_DASHCMD=y
CONFIG_FEATURE_LESS_LINENUMS=y
CONFIG_HDPARM=y
CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
CONFIG_MAKEDEVS=y
# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
CONFIG_FEATURE_MAKEDEVS_TABLE=y
CONFIG_MAN=y
CONFIG_MICROCOM=y
CONFIG_MOUNTPOINT=y
CONFIG_MT=y
CONFIG_RAIDAUTORUN=y
CONFIG_READAHEAD=y
CONFIG_RUNLEVEL=y
CONFIG_RX=y
CONFIG_SETSID=y
CONFIG_STRINGS=y
CONFIG_TASKSET=y
CONFIG_FEATURE_TASKSET_FANCY=y
CONFIG_TIME=y
CONFIG_TIMEOUT=y
CONFIG_TTYSIZE=y
CONFIG_VOLNAME=y
CONFIG_WALL=y
CONFIG_WATCHDOG=y
#
# Networking Utilities
#
CONFIG_FEATURE_IPV6=y
CONFIG_FEATURE_UNIX_LOCAL=y
CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
CONFIG_VERBOSE_RESOLUTION_ERRORS=y
CONFIG_ARP=y
CONFIG_ARPING=y
CONFIG_BRCTL=y
CONFIG_FEATURE_BRCTL_FANCY=y
CONFIG_FEATURE_BRCTL_SHOW=y
CONFIG_DNSD=y
CONFIG_ETHER_WAKE=y
CONFIG_FAKEIDENTD=y
CONFIG_FTPD=y
CONFIG_FEATURE_FTP_WRITE=y
CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST=y
CONFIG_FTPGET=y
CONFIG_FTPPUT=y
CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
CONFIG_HOSTNAME=y
CONFIG_HTTPD=y
CONFIG_FEATURE_HTTPD_RANGES=y
CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
CONFIG_FEATURE_HTTPD_SETUID=y
CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
CONFIG_FEATURE_HTTPD_AUTH_MD5=y
CONFIG_FEATURE_HTTPD_CGI=y
CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
CONFIG_FEATURE_HTTPD_PROXY=y
CONFIG_IFCONFIG=y
CONFIG_FEATURE_IFCONFIG_STATUS=y
CONFIG_FEATURE_IFCONFIG_SLIP=y
CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
CONFIG_FEATURE_IFCONFIG_HW=y
CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
CONFIG_IFENSLAVE=y
CONFIG_IFPLUGD=y
CONFIG_IFUPDOWN=y
CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
CONFIG_FEATURE_IFUPDOWN_IP=y
CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
CONFIG_FEATURE_IFUPDOWN_IPV4=y
CONFIG_FEATURE_IFUPDOWN_IPV6=y
CONFIG_FEATURE_IFUPDOWN_MAPPING=y
CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP=y
CONFIG_INETD=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
CONFIG_FEATURE_INETD_RPC=y
CONFIG_IP=y
CONFIG_FEATURE_IP_ADDRESS=y
CONFIG_FEATURE_IP_LINK=y
CONFIG_FEATURE_IP_ROUTE=y
CONFIG_FEATURE_IP_TUNNEL=y
CONFIG_FEATURE_IP_RULE=y
CONFIG_FEATURE_IP_SHORT_FORMS=y
CONFIG_FEATURE_IP_RARE_PROTOCOLS=y
CONFIG_IPADDR=y
CONFIG_IPLINK=y
CONFIG_IPROUTE=y
CONFIG_IPTUNNEL=y
CONFIG_IPRULE=y
CONFIG_IPCALC=y
CONFIG_FEATURE_IPCALC_FANCY=y
CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y
CONFIG_NAMEIF=y
CONFIG_FEATURE_NAMEIF_EXTENDED=y
CONFIG_NC=y
CONFIG_NC_SERVER=y
CONFIG_NC_EXTRA=y
CONFIG_NETSTAT=y
CONFIG_FEATURE_NETSTAT_WIDE=y
CONFIG_FEATURE_NETSTAT_PRG=y
CONFIG_NSLOOKUP=y
CONFIG_NTPD=y
CONFIG_FEATURE_NTPD_SERVER=y
CONFIG_PING=y
CONFIG_PING6=y
CONFIG_FEATURE_FANCY_PING=y
CONFIG_PSCAN=y
CONFIG_ROUTE=y
CONFIG_SLATTACH=y
CONFIG_TELNET=y
CONFIG_FEATURE_TELNET_TTYPE=y
CONFIG_FEATURE_TELNET_AUTOLOGIN=y
CONFIG_TELNETD=y
CONFIG_FEATURE_TELNETD_STANDALONE=y
CONFIG_FEATURE_TELNETD_INETD_WAIT=y
CONFIG_TFTP=y
CONFIG_TFTPD=y
CONFIG_FEATURE_TFTP_GET=y
CONFIG_FEATURE_TFTP_PUT=y
CONFIG_FEATURE_TFTP_BLOCKSIZE=y
CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
CONFIG_TFTP_DEBUG=y
CONFIG_TRACEROUTE=y
CONFIG_TRACEROUTE6=y
CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE=y
CONFIG_FEATURE_TRACEROUTE_USE_ICMP=y
CONFIG_UDHCPD=y
CONFIG_DHCPRELAY=y
CONFIG_DUMPLEASES=y
CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY=y
CONFIG_DHCPD_LEASES_FILE="/var/lib/misc/udhcpd.leases"
CONFIG_UDHCPC=y
CONFIG_FEATURE_UDHCPC_ARPING=y
CONFIG_FEATURE_UDHCP_PORT=y
CONFIG_UDHCP_DEBUG=9
CONFIG_FEATURE_UDHCP_RFC3397=y
CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script"
CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="-R -n"
CONFIG_VCONFIG=y
CONFIG_WGET=y
CONFIG_FEATURE_WGET_STATUSBAR=y
CONFIG_FEATURE_WGET_AUTHENTICATION=y
CONFIG_FEATURE_WGET_LONG_OPTIONS=y
CONFIG_ZCIP=y
CONFIG_TCPSVD=y
CONFIG_TUNCTL=y
CONFIG_FEATURE_TUNCTL_UG=y
CONFIG_UDPSVD=y
#
# Print Utilities
#
CONFIG_LPD=y
CONFIG_LPR=y
CONFIG_LPQ=y
#
# Mail Utilities
#
CONFIG_MAKEMIME=y
CONFIG_FEATURE_MIME_CHARSET="us-ascii"
CONFIG_POPMAILDIR=y
CONFIG_FEATURE_POPMAILDIR_DELIVERY=y
CONFIG_REFORMIME=y
CONFIG_FEATURE_REFORMIME_COMPAT=y
CONFIG_SENDMAIL=y
#
# Process Utilities
#
CONFIG_FREE=y
CONFIG_FUSER=y
CONFIG_KILL=y
CONFIG_KILLALL=y
CONFIG_KILLALL5=y
CONFIG_NMETER=y
CONFIG_PGREP=y
CONFIG_PIDOF=y
CONFIG_FEATURE_PIDOF_SINGLE=y
CONFIG_FEATURE_PIDOF_OMIT=y
CONFIG_PKILL=y
CONFIG_PS=y
CONFIG_FEATURE_PS_WIDE=y
CONFIG_FEATURE_PS_TIME=y
CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS=y
CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS=y
CONFIG_RENICE=y
CONFIG_BB_SYSCTL=y
CONFIG_TOP=y
CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
CONFIG_FEATURE_TOP_SMP_CPU=y
CONFIG_FEATURE_TOP_DECIMALS=y
CONFIG_FEATURE_TOP_SMP_PROCESS=y
CONFIG_FEATURE_TOPMEM=y
CONFIG_FEATURE_SHOW_THREADS=y
CONFIG_UPTIME=y
CONFIG_WATCH=y
#
# Runit Utilities
#
CONFIG_RUNSV=y
CONFIG_RUNSVDIR=y
CONFIG_FEATURE_RUNSVDIR_LOG=y
CONFIG_SV=y
CONFIG_SV_DEFAULT_SERVICE_DIR="/var/service"
CONFIG_SVLOGD=y
CONFIG_CHPST=y
CONFIG_SETUIDGID=y
CONFIG_ENVUIDGID=y
CONFIG_ENVDIR=y
CONFIG_SOFTLIMIT=y
#
# SELinux Utilities
#
CONFIG_CHCON=y
CONFIG_FEATURE_CHCON_LONG_OPTIONS=y
CONFIG_GETENFORCE=y
CONFIG_GETSEBOOL=y
CONFIG_LOAD_POLICY=y
CONFIG_MATCHPATHCON=y
CONFIG_RESTORECON=y
CONFIG_RUNCON=y
CONFIG_FEATURE_RUNCON_LONG_OPTIONS=y
CONFIG_SELINUXENABLED=y
CONFIG_SETENFORCE=y
CONFIG_SETFILES=y
CONFIG_FEATURE_SETFILES_CHECK_OPTION=y
CONFIG_SETSEBOOL=y
CONFIG_SESTATUS=y
#
# Shells
#
# CONFIG_FEATURE_SH_IS_ASH is not set
CONFIG_FEATURE_SH_IS_HUSH=y
# CONFIG_FEATURE_SH_IS_NONE is not set
# CONFIG_ASH is not set
# CONFIG_ASH_BASH_COMPAT is not set
# CONFIG_ASH_JOB_CONTROL is not set
# CONFIG_ASH_ALIAS is not set
# CONFIG_ASH_GETOPTS is not set
# CONFIG_ASH_BUILTIN_ECHO is not set
# CONFIG_ASH_BUILTIN_PRINTF is not set
# CONFIG_ASH_BUILTIN_TEST is not set
# CONFIG_ASH_CMDCMD is not set
# CONFIG_ASH_MAIL is not set
# CONFIG_ASH_OPTIMIZE_FOR_SIZE is not set
# CONFIG_ASH_RANDOM_SUPPORT is not set
# CONFIG_ASH_EXPAND_PRMT is not set
CONFIG_HUSH=y
CONFIG_HUSH_BASH_COMPAT=y
CONFIG_HUSH_HELP=y
CONFIG_HUSH_INTERACTIVE=y
CONFIG_HUSH_JOB=y
CONFIG_HUSH_TICK=y
CONFIG_HUSH_IF=y
CONFIG_HUSH_LOOPS=y
CONFIG_HUSH_CASE=y
CONFIG_HUSH_FUNCTIONS=y
CONFIG_HUSH_LOCAL=y
CONFIG_HUSH_EXPORT_N=y
CONFIG_HUSH_RANDOM_SUPPORT=y
CONFIG_LASH=y
CONFIG_MSH=y
CONFIG_SH_MATH_SUPPORT=y
CONFIG_SH_MATH_SUPPORT_64=y
CONFIG_FEATURE_SH_EXTRA_QUIET=y
CONFIG_FEATURE_SH_STANDALONE=y
CONFIG_FEATURE_SH_NOFORK=y
CONFIG_CTTYHACK=y
#
# System Logging Utilities
#
CONFIG_SYSLOGD=y
CONFIG_FEATURE_ROTATE_LOGFILE=y
CONFIG_FEATURE_REMOTE_LOG=y
CONFIG_FEATURE_SYSLOGD_DUP=y
CONFIG_FEATURE_IPC_SYSLOG=y
CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
CONFIG_LOGREAD=y
CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
CONFIG_KLOGD=y
CONFIG_LOGGER=y
-929
View File
@@ -1,929 +0,0 @@
#
# Automatically generated make config: don't edit
# Busybox version: 1.17.0.git
# Mon Jun 7 13:37:55 2010
#
CONFIG_HAVE_DOT_CONFIG=y
#
# Busybox Settings
#
#
# General Configuration
#
CONFIG_DESKTOP=y
CONFIG_EXTRA_COMPAT=y
CONFIG_INCLUDE_SUSv2=y
# CONFIG_USE_PORTABLE_CODE is not set
CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
CONFIG_SHOW_USAGE=y
CONFIG_FEATURE_VERBOSE_USAGE=y
# CONFIG_FEATURE_COMPRESS_USAGE is not set
# CONFIG_FEATURE_INSTALLER is not set
# CONFIG_LOCALE_SUPPORT is not set
CONFIG_UNICODE_SUPPORT=y
# CONFIG_UNICODE_USING_LOCALE is not set
CONFIG_FEATURE_CHECK_UNICODE_IN_ENV=y
CONFIG_SUBST_WCHAR=63
CONFIG_LAST_SUPPORTED_WCHAR=65535
CONFIG_UNICODE_COMBINING_WCHARS=y
CONFIG_UNICODE_WIDE_WCHARS=y
CONFIG_UNICODE_BIDI_SUPPORT=y
# CONFIG_UNICODE_NEUTRAL_TABLE is not set
CONFIG_UNICODE_PRESERVE_BROKEN=y
CONFIG_LONG_OPTS=y
CONFIG_FEATURE_DEVPTS=y
# CONFIG_FEATURE_CLEAN_UP is not set
CONFIG_FEATURE_UTMP=y
CONFIG_FEATURE_WTMP=y
CONFIG_FEATURE_PIDFILE=y
# CONFIG_FEATURE_SUID is not set
# CONFIG_FEATURE_SUID_CONFIG is not set
# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
# CONFIG_SELINUX is not set
# CONFIG_FEATURE_PREFER_APPLETS is not set
CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
# CONFIG_FEATURE_SYSLOG is not set
# CONFIG_FEATURE_HAVE_RPC is not set
#
# Build Options
#
CONFIG_STATIC=y
# CONFIG_PIE is not set
# CONFIG_NOMMU is not set
# CONFIG_BUILD_LIBBUSYBOX is not set
# CONFIG_FEATURE_INDIVIDUAL is not set
# CONFIG_FEATURE_SHARED_BUSYBOX is not set
CONFIG_LFS=y
CONFIG_CROSS_COMPILER_PREFIX="i486-linux-uclibc-"
CONFIG_EXTRA_CFLAGS=""
#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_DEBUG_PESSIMIZE is not set
CONFIG_WERROR=y
CONFIG_NO_DEBUG_LIB=y
# CONFIG_DMALLOC is not set
# CONFIG_EFENCE is not set
#
# Installation Options
#
# CONFIG_INSTALL_NO_USR is not set
CONFIG_INSTALL_APPLET_SYMLINKS=y
# CONFIG_INSTALL_APPLET_HARDLINKS is not set
# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
# CONFIG_INSTALL_APPLET_DONT is not set
# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
CONFIG_PREFIX="./_install"
#
# Busybox Library Tuning
#
CONFIG_PASSWORD_MINLEN=6
CONFIG_MD5_SIZE_VS_SPEED=2
CONFIG_FEATURE_FAST_TOP=y
# CONFIG_FEATURE_ETC_NETWORKS is not set
CONFIG_FEATURE_EDITING=y
CONFIG_FEATURE_EDITING_MAX_LEN=1024
CONFIG_FEATURE_EDITING_VI=y
CONFIG_FEATURE_EDITING_HISTORY=15
# CONFIG_FEATURE_EDITING_SAVEHISTORY is not set
CONFIG_FEATURE_TAB_COMPLETION=y
CONFIG_FEATURE_USERNAME_COMPLETION=y
CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
CONFIG_FEATURE_EDITING_ASK_TERMINAL=y
CONFIG_FEATURE_NON_POSIX_CP=y
# CONFIG_FEATURE_VERBOSE_CP_MESSAGE is not set
CONFIG_FEATURE_COPYBUF_KB=64
CONFIG_MONOTONIC_SYSCALL=y
# CONFIG_IOCTL_HEX2STR_ERROR is not set
CONFIG_FEATURE_HWIB=y
#
# Applets
#
#
# Archival Utilities
#
CONFIG_FEATURE_SEAMLESS_XZ=y
CONFIG_FEATURE_SEAMLESS_LZMA=y
CONFIG_FEATURE_SEAMLESS_BZ2=y
CONFIG_FEATURE_SEAMLESS_GZ=y
CONFIG_FEATURE_SEAMLESS_Z=y
# CONFIG_AR is not set
# CONFIG_FEATURE_AR_LONG_FILENAMES is not set
# CONFIG_FEATURE_AR_CREATE is not set
# CONFIG_BUNZIP2 is not set
# CONFIG_BZIP2 is not set
# CONFIG_CPIO is not set
# CONFIG_FEATURE_CPIO_O is not set
# CONFIG_FEATURE_CPIO_P is not set
# CONFIG_DPKG is not set
# CONFIG_DPKG_DEB is not set
# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
# CONFIG_GUNZIP is not set
# CONFIG_GZIP is not set
# CONFIG_FEATURE_GZIP_LONG_OPTIONS is not set
# CONFIG_LZOP is not set
# CONFIG_LZOP_COMPR_HIGH is not set
# CONFIG_RPM2CPIO is not set
# CONFIG_RPM is not set
# CONFIG_TAR is not set
# CONFIG_FEATURE_TAR_CREATE is not set
# CONFIG_FEATURE_TAR_AUTODETECT is not set
# CONFIG_FEATURE_TAR_FROM is not set
# CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY is not set
# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
# CONFIG_FEATURE_TAR_GNU_EXTENSIONS is not set
# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
# CONFIG_FEATURE_TAR_UNAME_GNAME is not set
# CONFIG_FEATURE_TAR_NOPRESERVE_TIME is not set
# CONFIG_FEATURE_TAR_SELINUX is not set
# CONFIG_UNCOMPRESS is not set
# CONFIG_UNLZMA is not set
# CONFIG_FEATURE_LZMA_FAST is not set
# CONFIG_LZMA is not set
# CONFIG_UNXZ is not set
# CONFIG_XZ is not set
# CONFIG_UNZIP is not set
#
# Coreutils
#
CONFIG_BASENAME=y
# CONFIG_CAT is not set
# CONFIG_DATE is not set
# CONFIG_FEATURE_DATE_ISOFMT is not set
# CONFIG_FEATURE_DATE_NANO is not set
# CONFIG_FEATURE_DATE_COMPAT is not set
# CONFIG_TEST is not set
# CONFIG_FEATURE_TEST_64 is not set
# CONFIG_TR is not set
# CONFIG_FEATURE_TR_CLASSES is not set
# CONFIG_FEATURE_TR_EQUIV is not set
# CONFIG_CAL is not set
# CONFIG_CATV is not set
# CONFIG_CHGRP is not set
# CONFIG_CHMOD is not set
# CONFIG_CHOWN is not set
# CONFIG_FEATURE_CHOWN_LONG_OPTIONS is not set
# CONFIG_CHROOT is not set
# CONFIG_CKSUM is not set
# CONFIG_COMM is not set
# CONFIG_CP is not set
# CONFIG_FEATURE_CP_LONG_OPTIONS is not set
# CONFIG_CUT is not set
# CONFIG_DD is not set
# CONFIG_FEATURE_DD_SIGNAL_HANDLING is not set
# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
# CONFIG_FEATURE_DD_IBS_OBS is not set
# CONFIG_DF is not set
# CONFIG_FEATURE_DF_FANCY is not set
# CONFIG_DIRNAME is not set
# CONFIG_DOS2UNIX is not set
# CONFIG_UNIX2DOS is not set
# CONFIG_DU is not set
# CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K is not set
# CONFIG_ECHO is not set
# CONFIG_FEATURE_FANCY_ECHO is not set
# CONFIG_ENV is not set
# CONFIG_FEATURE_ENV_LONG_OPTIONS is not set
# CONFIG_EXPAND is not set
# CONFIG_FEATURE_EXPAND_LONG_OPTIONS is not set
# CONFIG_EXPR is not set
# CONFIG_EXPR_MATH_SUPPORT_64 is not set
CONFIG_FALSE=y
# CONFIG_FOLD is not set
# CONFIG_FSYNC is not set
# CONFIG_HEAD is not set
# CONFIG_FEATURE_FANCY_HEAD is not set
# CONFIG_HOSTID is not set
# CONFIG_ID is not set
# CONFIG_INSTALL is not set
# CONFIG_FEATURE_INSTALL_LONG_OPTIONS is not set
# CONFIG_LENGTH is not set
# CONFIG_LN is not set
# CONFIG_LOGNAME is not set
# CONFIG_LS is not set
# CONFIG_FEATURE_LS_FILETYPES is not set
# CONFIG_FEATURE_LS_FOLLOWLINKS is not set
# CONFIG_FEATURE_LS_RECURSIVE is not set
# CONFIG_FEATURE_LS_SORTFILES is not set
# CONFIG_FEATURE_LS_TIMESTAMPS is not set
# CONFIG_FEATURE_LS_USERNAME is not set
# CONFIG_FEATURE_LS_COLOR is not set
# CONFIG_FEATURE_LS_COLOR_IS_DEFAULT is not set
# CONFIG_MD5SUM is not set
# CONFIG_MKDIR is not set
# CONFIG_FEATURE_MKDIR_LONG_OPTIONS is not set
# CONFIG_MKFIFO is not set
# CONFIG_MKNOD is not set
# CONFIG_MV is not set
# CONFIG_FEATURE_MV_LONG_OPTIONS is not set
# CONFIG_NICE is not set
# CONFIG_NOHUP is not set
# CONFIG_OD is not set
# CONFIG_PRINTENV is not set
# CONFIG_PRINTF is not set
# CONFIG_PWD is not set
# CONFIG_READLINK is not set
# CONFIG_FEATURE_READLINK_FOLLOW is not set
# CONFIG_REALPATH is not set
# CONFIG_RM is not set
# CONFIG_RMDIR is not set
# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set
# CONFIG_SEQ is not set
# CONFIG_SHA1SUM is not set
# CONFIG_SHA256SUM is not set
# CONFIG_SHA512SUM is not set
# CONFIG_SLEEP is not set
# CONFIG_FEATURE_FANCY_SLEEP is not set
# CONFIG_FEATURE_FLOAT_SLEEP is not set
# CONFIG_SORT is not set
# CONFIG_FEATURE_SORT_BIG is not set
# CONFIG_SPLIT is not set
# CONFIG_FEATURE_SPLIT_FANCY is not set
# CONFIG_STAT is not set
# CONFIG_FEATURE_STAT_FORMAT is not set
# CONFIG_STTY is not set
# CONFIG_SUM is not set
# CONFIG_SYNC is not set
# CONFIG_TAC is not set
# CONFIG_TAIL is not set
# CONFIG_FEATURE_FANCY_TAIL is not set
# CONFIG_TEE is not set
# CONFIG_FEATURE_TEE_USE_BLOCK_IO is not set
# CONFIG_TOUCH is not set
CONFIG_TRUE=y
# CONFIG_TTY is not set
# CONFIG_UNAME is not set
# CONFIG_UNEXPAND is not set
# CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set
# CONFIG_UNIQ is not set
# CONFIG_USLEEP is not set
# CONFIG_UUDECODE is not set
# CONFIG_UUENCODE is not set
# CONFIG_WC is not set
# CONFIG_FEATURE_WC_LARGE is not set
# CONFIG_WHO is not set
# CONFIG_WHOAMI is not set
# CONFIG_YES is not set
# CONFIG_FEATURE_PRESERVE_HARDLINKS is not set
# CONFIG_FEATURE_AUTOWIDTH is not set
# CONFIG_FEATURE_HUMAN_READABLE is not set
# CONFIG_FEATURE_MD5_SHA1_SUM_CHECK is not set
#
# Console Utilities
#
# CONFIG_CHVT is not set
# CONFIG_FGCONSOLE is not set
# CONFIG_CLEAR is not set
# CONFIG_DEALLOCVT is not set
# CONFIG_DUMPKMAP is not set
# CONFIG_KBD_MODE is not set
# CONFIG_LOADFONT is not set
# CONFIG_LOADKMAP is not set
# CONFIG_OPENVT is not set
# CONFIG_RESET is not set
# CONFIG_RESIZE is not set
# CONFIG_FEATURE_RESIZE_PRINT is not set
# CONFIG_SETCONSOLE is not set
# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set
# CONFIG_SETFONT is not set
# CONFIG_FEATURE_SETFONT_TEXTUAL_MAP is not set
CONFIG_DEFAULT_SETFONT_DIR=""
# CONFIG_SETKEYCODES is not set
# CONFIG_SETLOGCONS is not set
# CONFIG_SHOWKEY is not set
# CONFIG_FEATURE_LOADFONT_PSF2 is not set
# CONFIG_FEATURE_LOADFONT_RAW is not set
#
# Debian Utilities
#
# CONFIG_MKTEMP is not set
CONFIG_PIPE_PROGRESS=y
# CONFIG_RUN_PARTS is not set
# CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS is not set
# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
# CONFIG_START_STOP_DAEMON is not set
# CONFIG_FEATURE_START_STOP_DAEMON_FANCY is not set
# CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS is not set
# CONFIG_WHICH is not set
#
# Editors
#
# CONFIG_AWK is not set
# CONFIG_FEATURE_AWK_LIBM is not set
# CONFIG_CMP is not set
# CONFIG_DIFF is not set
# CONFIG_FEATURE_DIFF_LONG_OPTIONS is not set
# CONFIG_FEATURE_DIFF_DIR is not set
# CONFIG_ED is not set
# CONFIG_PATCH is not set
# CONFIG_SED is not set
# CONFIG_VI is not set
CONFIG_FEATURE_VI_MAX_LEN=0
# CONFIG_FEATURE_VI_8BIT is not set
# CONFIG_FEATURE_VI_COLON is not set
# CONFIG_FEATURE_VI_YANKMARK is not set
# CONFIG_FEATURE_VI_SEARCH is not set
# CONFIG_FEATURE_VI_USE_SIGNALS is not set
# CONFIG_FEATURE_VI_DOT_CMD is not set
# CONFIG_FEATURE_VI_READONLY is not set
# CONFIG_FEATURE_VI_SETOPTS is not set
# CONFIG_FEATURE_VI_SET is not set
# CONFIG_FEATURE_VI_WIN_RESIZE is not set
# CONFIG_FEATURE_VI_ASK_TERMINAL is not set
# CONFIG_FEATURE_VI_OPTIMIZE_CURSOR is not set
# CONFIG_FEATURE_ALLOW_EXEC is not set
#
# Finding Utilities
#
# CONFIG_FIND is not set
# CONFIG_FEATURE_FIND_PRINT0 is not set
# CONFIG_FEATURE_FIND_MTIME is not set
# CONFIG_FEATURE_FIND_MMIN is not set
# CONFIG_FEATURE_FIND_PERM is not set
# CONFIG_FEATURE_FIND_TYPE is not set
# CONFIG_FEATURE_FIND_XDEV is not set
# CONFIG_FEATURE_FIND_MAXDEPTH is not set
# CONFIG_FEATURE_FIND_NEWER is not set
# CONFIG_FEATURE_FIND_INUM is not set
# CONFIG_FEATURE_FIND_EXEC is not set
# CONFIG_FEATURE_FIND_USER is not set
# CONFIG_FEATURE_FIND_GROUP is not set
# CONFIG_FEATURE_FIND_NOT is not set
# CONFIG_FEATURE_FIND_DEPTH is not set
# CONFIG_FEATURE_FIND_PAREN is not set
# CONFIG_FEATURE_FIND_SIZE is not set
# CONFIG_FEATURE_FIND_PRUNE is not set
# CONFIG_FEATURE_FIND_DELETE is not set
# CONFIG_FEATURE_FIND_PATH is not set
# CONFIG_FEATURE_FIND_REGEX is not set
# CONFIG_FEATURE_FIND_CONTEXT is not set
# CONFIG_FEATURE_FIND_LINKS is not set
# CONFIG_GREP is not set
# CONFIG_FEATURE_GREP_EGREP_ALIAS is not set
# CONFIG_FEATURE_GREP_FGREP_ALIAS is not set
# CONFIG_FEATURE_GREP_CONTEXT is not set
# CONFIG_XARGS is not set
# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
# CONFIG_FEATURE_XARGS_SUPPORT_QUOTES is not set
# CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT is not set
# CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM is not set
#
# Init Utilities
#
# CONFIG_INIT is not set
# CONFIG_FEATURE_USE_INITTAB is not set
# CONFIG_FEATURE_KILL_REMOVED is not set
CONFIG_FEATURE_KILL_DELAY=0
# CONFIG_FEATURE_INIT_SCTTY is not set
# CONFIG_FEATURE_INIT_SYSLOG is not set
# CONFIG_FEATURE_EXTRA_QUIET is not set
# CONFIG_FEATURE_INIT_COREDUMPS is not set
# CONFIG_FEATURE_INITRD is not set
# CONFIG_HALT is not set
# CONFIG_FEATURE_CALL_TELINIT is not set
CONFIG_TELINIT_PATH=""
# CONFIG_MESG is not set
# CONFIG_BOOTCHARTD is not set
#
# Login/Password Management Utilities
#
# CONFIG_FEATURE_SHADOWPASSWDS is not set
# CONFIG_USE_BB_PWD_GRP is not set
# CONFIG_USE_BB_SHADOW is not set
# CONFIG_USE_BB_CRYPT is not set
# CONFIG_USE_BB_CRYPT_SHA is not set
# CONFIG_ADDGROUP is not set
# CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS is not set
# CONFIG_FEATURE_ADDUSER_TO_GROUP is not set
# CONFIG_DELGROUP is not set
# CONFIG_FEATURE_DEL_USER_FROM_GROUP is not set
# CONFIG_FEATURE_CHECK_NAMES is not set
# CONFIG_ADDUSER is not set
# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
CONFIG_FIRST_SYSTEM_ID=0
CONFIG_LAST_SYSTEM_ID=0
# CONFIG_DELUSER is not set
# CONFIG_GETTY is not set
# CONFIG_LOGIN is not set
# CONFIG_PAM is not set
# CONFIG_LOGIN_SCRIPTS is not set
# CONFIG_FEATURE_NOLOGIN is not set
# CONFIG_FEATURE_SECURETTY is not set
# CONFIG_PASSWD is not set
# CONFIG_FEATURE_PASSWD_WEAK_CHECK is not set
# CONFIG_CRYPTPW is not set
# CONFIG_CHPASSWD is not set
# CONFIG_SU is not set
# CONFIG_FEATURE_SU_SYSLOG is not set
# CONFIG_FEATURE_SU_CHECKS_SHELLS is not set
# CONFIG_SULOGIN is not set
# CONFIG_VLOCK is not set
#
# Linux Ext2 FS Progs
#
# CONFIG_CHATTR is not set
# CONFIG_FSCK is not set
# CONFIG_LSATTR is not set
# CONFIG_TUNE2FS is not set
#
# Linux Module Utilities
#
# CONFIG_MODINFO is not set
# CONFIG_MODPROBE_SMALL is not set
# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set
# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set
# CONFIG_INSMOD is not set
# CONFIG_RMMOD is not set
# CONFIG_LSMOD is not set
# CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT is not set
# CONFIG_MODPROBE is not set
# CONFIG_FEATURE_MODPROBE_BLACKLIST is not set
# CONFIG_DEPMOD is not set
#
# Options common to multiple modutils
#
# CONFIG_FEATURE_2_4_MODULES is not set
# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
# CONFIG_FEATURE_CHECK_TAINTED_MODULE is not set
# CONFIG_FEATURE_MODUTILS_ALIAS is not set
# CONFIG_FEATURE_MODUTILS_SYMBOLS is not set
CONFIG_DEFAULT_MODULES_DIR=""
CONFIG_DEFAULT_DEPMOD_FILE=""
#
# Linux System Utilities
#
# CONFIG_ACPID is not set
# CONFIG_FEATURE_ACPID_COMPAT is not set
# CONFIG_BLKID is not set
# CONFIG_DMESG is not set
# CONFIG_FEATURE_DMESG_PRETTY is not set
# CONFIG_FBSET is not set
# CONFIG_FEATURE_FBSET_FANCY is not set
# CONFIG_FEATURE_FBSET_READMODE is not set
# CONFIG_FDFLUSH is not set
# CONFIG_FDFORMAT is not set
# CONFIG_FDISK is not set
CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
# CONFIG_FEATURE_FDISK_WRITABLE is not set
# CONFIG_FEATURE_AIX_LABEL is not set
# CONFIG_FEATURE_SGI_LABEL is not set
# CONFIG_FEATURE_SUN_LABEL is not set
# CONFIG_FEATURE_OSF_LABEL is not set
# CONFIG_FEATURE_FDISK_ADVANCED is not set
# CONFIG_FINDFS is not set
# CONFIG_FLOCK is not set
# CONFIG_FREERAMDISK is not set
# CONFIG_FSCK_MINIX is not set
# CONFIG_MKFS_EXT2 is not set
# CONFIG_MKFS_MINIX is not set
# CONFIG_FEATURE_MINIX2 is not set
# CONFIG_MKFS_REISER is not set
# CONFIG_MKFS_VFAT is not set
# CONFIG_GETOPT is not set
# CONFIG_FEATURE_GETOPT_LONG is not set
# CONFIG_HEXDUMP is not set
# CONFIG_FEATURE_HEXDUMP_REVERSE is not set
# CONFIG_HD is not set
# CONFIG_HWCLOCK is not set
# CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS is not set
# CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS is not set
# CONFIG_IPCRM is not set
# CONFIG_IPCS is not set
# CONFIG_LOSETUP is not set
# CONFIG_LSPCI is not set
# CONFIG_LSUSB is not set
# CONFIG_MDEV is not set
# CONFIG_FEATURE_MDEV_CONF is not set
# CONFIG_FEATURE_MDEV_RENAME is not set
# CONFIG_FEATURE_MDEV_RENAME_REGEXP is not set
# CONFIG_FEATURE_MDEV_EXEC is not set
# CONFIG_FEATURE_MDEV_LOAD_FIRMWARE is not set
# CONFIG_MKSWAP is not set
# CONFIG_FEATURE_MKSWAP_UUID is not set
# CONFIG_MORE is not set
# CONFIG_FEATURE_USE_TERMIOS is not set
CONFIG_VOLUMEID=y
# CONFIG_FEATURE_VOLUMEID_EXT is not set
# CONFIG_FEATURE_VOLUMEID_BTRFS is not set
# CONFIG_FEATURE_VOLUMEID_REISERFS is not set
# CONFIG_FEATURE_VOLUMEID_FAT is not set
# CONFIG_FEATURE_VOLUMEID_HFS is not set
# CONFIG_FEATURE_VOLUMEID_JFS is not set
# CONFIG_FEATURE_VOLUMEID_XFS is not set
# CONFIG_FEATURE_VOLUMEID_NTFS is not set
# CONFIG_FEATURE_VOLUMEID_ISO9660 is not set
# CONFIG_FEATURE_VOLUMEID_UDF is not set
# CONFIG_FEATURE_VOLUMEID_LUKS is not set
# CONFIG_FEATURE_VOLUMEID_LINUXSWAP is not set
# CONFIG_FEATURE_VOLUMEID_CRAMFS is not set
# CONFIG_FEATURE_VOLUMEID_ROMFS is not set
# CONFIG_FEATURE_VOLUMEID_SYSV is not set
# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
# CONFIG_FEATURE_VOLUMEID_LINUXRAID is not set
# CONFIG_MOUNT is not set
# CONFIG_FEATURE_MOUNT_FAKE is not set
# CONFIG_FEATURE_MOUNT_VERBOSE is not set
# CONFIG_FEATURE_MOUNT_HELPERS is not set
# CONFIG_FEATURE_MOUNT_LABEL is not set
# CONFIG_FEATURE_MOUNT_NFS is not set
# CONFIG_FEATURE_MOUNT_CIFS is not set
# CONFIG_FEATURE_MOUNT_FLAGS is not set
# CONFIG_FEATURE_MOUNT_FSTAB is not set
# CONFIG_PIVOT_ROOT is not set
# CONFIG_RDATE is not set
# CONFIG_RDEV is not set
# CONFIG_READPROFILE is not set
# CONFIG_RTCWAKE is not set
# CONFIG_SCRIPT is not set
# CONFIG_SCRIPTREPLAY is not set
# CONFIG_SETARCH is not set
# CONFIG_SWAPONOFF is not set
# CONFIG_FEATURE_SWAPON_PRI is not set
# CONFIG_SWITCH_ROOT is not set
# CONFIG_UMOUNT is not set
# CONFIG_FEATURE_UMOUNT_ALL is not set
# CONFIG_FEATURE_MOUNT_LOOP is not set
# CONFIG_FEATURE_MOUNT_LOOP_CREATE is not set
# CONFIG_FEATURE_MTAB_SUPPORT is not set
#
# Miscellaneous Utilities
#
# CONFIG_ADJTIMEX is not set
CONFIG_BBCONFIG=y
# CONFIG_BEEP is not set
CONFIG_FEATURE_BEEP_FREQ=0
CONFIG_FEATURE_BEEP_LENGTH_MS=0
# CONFIG_CHAT is not set
# CONFIG_FEATURE_CHAT_NOFAIL is not set
# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
# CONFIG_FEATURE_CHAT_IMPLICIT_CR is not set
# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
# CONFIG_CHRT is not set
# CONFIG_CROND is not set
# CONFIG_FEATURE_CROND_D is not set
# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
CONFIG_FEATURE_CROND_DIR=""
# CONFIG_CRONTAB is not set
# CONFIG_DC is not set
# CONFIG_FEATURE_DC_LIBM is not set
# CONFIG_DEVFSD is not set
# CONFIG_DEVFSD_MODLOAD is not set
# CONFIG_DEVFSD_FG_NP is not set
# CONFIG_DEVFSD_VERBOSE is not set
# CONFIG_FEATURE_DEVFS is not set
# CONFIG_DEVMEM is not set
# CONFIG_EJECT is not set
# CONFIG_FEATURE_EJECT_SCSI is not set
# CONFIG_FBSPLASH is not set
# CONFIG_FLASHCP is not set
# CONFIG_FLASH_LOCK is not set
# CONFIG_FLASH_UNLOCK is not set
# CONFIG_FLASH_ERASEALL is not set
# CONFIG_IONICE is not set
# CONFIG_INOTIFYD is not set
# CONFIG_LAST is not set
# CONFIG_FEATURE_LAST_SMALL is not set
# CONFIG_FEATURE_LAST_FANCY is not set
# CONFIG_LESS is not set
CONFIG_FEATURE_LESS_MAXLINES=0
# CONFIG_FEATURE_LESS_BRACKETS is not set
# CONFIG_FEATURE_LESS_FLAGS is not set
# CONFIG_FEATURE_LESS_MARKS is not set
# CONFIG_FEATURE_LESS_REGEXP is not set
# CONFIG_FEATURE_LESS_WINCH is not set
# CONFIG_FEATURE_LESS_DASHCMD is not set
# CONFIG_FEATURE_LESS_LINENUMS is not set
# CONFIG_HDPARM is not set
# CONFIG_FEATURE_HDPARM_GET_IDENTITY is not set
# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set
# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set
# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set
# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set
# CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set
# CONFIG_MAKEDEVS is not set
# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
# CONFIG_FEATURE_MAKEDEVS_TABLE is not set
# CONFIG_MAN is not set
# CONFIG_MICROCOM is not set
# CONFIG_MOUNTPOINT is not set
# CONFIG_MT is not set
# CONFIG_RAIDAUTORUN is not set
# CONFIG_READAHEAD is not set
# CONFIG_RFKILL is not set
# CONFIG_RUNLEVEL is not set
# CONFIG_RX is not set
# CONFIG_SETSID is not set
# CONFIG_STRINGS is not set
# CONFIG_TASKSET is not set
# CONFIG_FEATURE_TASKSET_FANCY is not set
# CONFIG_TIME is not set
# CONFIG_TIMEOUT is not set
# CONFIG_TTYSIZE is not set
# CONFIG_VOLNAME is not set
# CONFIG_WALL is not set
# CONFIG_WATCHDOG is not set
#
# Networking Utilities
#
# CONFIG_FEATURE_IPV6 is not set
# CONFIG_FEATURE_UNIX_LOCAL is not set
# CONFIG_FEATURE_PREFER_IPV4_ADDRESS is not set
# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
# CONFIG_ARP is not set
# CONFIG_ARPING is not set
# CONFIG_BRCTL is not set
# CONFIG_FEATURE_BRCTL_FANCY is not set
# CONFIG_FEATURE_BRCTL_SHOW is not set
# CONFIG_DNSD is not set
# CONFIG_ETHER_WAKE is not set
# CONFIG_FAKEIDENTD is not set
# CONFIG_FTPD is not set
# CONFIG_FEATURE_FTP_WRITE is not set
# CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST is not set
# CONFIG_FTPGET is not set
# CONFIG_FTPPUT is not set
# CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set
# CONFIG_HOSTNAME is not set
# CONFIG_HTTPD is not set
# CONFIG_FEATURE_HTTPD_RANGES is not set
# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
# CONFIG_FEATURE_HTTPD_SETUID is not set
# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
# CONFIG_FEATURE_HTTPD_CGI is not set
# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
# CONFIG_FEATURE_HTTPD_PROXY is not set
# CONFIG_IFCONFIG is not set
# CONFIG_FEATURE_IFCONFIG_STATUS is not set
# CONFIG_FEATURE_IFCONFIG_SLIP is not set
# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
# CONFIG_FEATURE_IFCONFIG_HW is not set
# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
# CONFIG_IFENSLAVE is not set
# CONFIG_IFPLUGD is not set
# CONFIG_IFUPDOWN is not set
CONFIG_IFUPDOWN_IFSTATE_PATH=""
# CONFIG_FEATURE_IFUPDOWN_IP is not set
# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
# CONFIG_FEATURE_IFUPDOWN_IPV4 is not set
# CONFIG_FEATURE_IFUPDOWN_IPV6 is not set
# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
# CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP is not set
# CONFIG_INETD is not set
# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO is not set
# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD is not set
# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME is not set
# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME is not set
# CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN is not set
# CONFIG_FEATURE_INETD_RPC is not set
# CONFIG_IP is not set
# CONFIG_FEATURE_IP_ADDRESS is not set
# CONFIG_FEATURE_IP_LINK is not set
# CONFIG_FEATURE_IP_ROUTE is not set
# CONFIG_FEATURE_IP_TUNNEL is not set
# CONFIG_FEATURE_IP_RULE is not set
# CONFIG_FEATURE_IP_SHORT_FORMS is not set
# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
# CONFIG_IPADDR is not set
# CONFIG_IPLINK is not set
# CONFIG_IPROUTE is not set
# CONFIG_IPTUNNEL is not set
# CONFIG_IPRULE is not set
# CONFIG_IPCALC is not set
# CONFIG_FEATURE_IPCALC_FANCY is not set
# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
# CONFIG_NAMEIF is not set
# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
# CONFIG_NC is not set
# CONFIG_NC_SERVER is not set
# CONFIG_NC_EXTRA is not set
# CONFIG_NETSTAT is not set
# CONFIG_FEATURE_NETSTAT_WIDE is not set
# CONFIG_FEATURE_NETSTAT_PRG is not set
# CONFIG_NSLOOKUP is not set
# CONFIG_NTPD is not set
# CONFIG_FEATURE_NTPD_SERVER is not set
# CONFIG_PING is not set
# CONFIG_PING6 is not set
# CONFIG_FEATURE_FANCY_PING is not set
# CONFIG_PSCAN is not set
# CONFIG_ROUTE is not set
# CONFIG_SLATTACH is not set
# CONFIG_TCPSVD is not set
# CONFIG_TELNET is not set
# CONFIG_FEATURE_TELNET_TTYPE is not set
# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set
# CONFIG_TELNETD is not set
# CONFIG_FEATURE_TELNETD_STANDALONE is not set
# CONFIG_FEATURE_TELNETD_INETD_WAIT is not set
# CONFIG_TFTP is not set
# CONFIG_TFTPD is not set
# CONFIG_FEATURE_TFTP_GET is not set
# CONFIG_FEATURE_TFTP_PUT is not set
# CONFIG_FEATURE_TFTP_BLOCKSIZE is not set
# CONFIG_FEATURE_TFTP_PROGRESS_BAR is not set
# CONFIG_TFTP_DEBUG is not set
# CONFIG_TRACEROUTE is not set
# CONFIG_TRACEROUTE6 is not set
# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
# CONFIG_TUNCTL is not set
# CONFIG_FEATURE_TUNCTL_UG is not set
# CONFIG_UDHCPD is not set
# CONFIG_DHCPRELAY is not set
# CONFIG_DUMPLEASES is not set
# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
CONFIG_DHCPD_LEASES_FILE=""
# CONFIG_UDHCPC is not set
# CONFIG_FEATURE_UDHCPC_ARPING is not set
# CONFIG_FEATURE_UDHCP_PORT is not set
CONFIG_UDHCP_DEBUG=0
# CONFIG_FEATURE_UDHCP_RFC3397 is not set
CONFIG_UDHCPC_DEFAULT_SCRIPT=""
CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=0
CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS=""
# CONFIG_UDPSVD is not set
# CONFIG_VCONFIG is not set
# CONFIG_WGET is not set
# CONFIG_FEATURE_WGET_STATUSBAR is not set
# CONFIG_FEATURE_WGET_AUTHENTICATION is not set
# CONFIG_FEATURE_WGET_LONG_OPTIONS is not set
# CONFIG_ZCIP is not set
#
# Print Utilities
#
# CONFIG_LPD is not set
# CONFIG_LPR is not set
# CONFIG_LPQ is not set
#
# Mail Utilities
#
# CONFIG_MAKEMIME is not set
CONFIG_FEATURE_MIME_CHARSET=""
# CONFIG_POPMAILDIR is not set
# CONFIG_FEATURE_POPMAILDIR_DELIVERY is not set
# CONFIG_REFORMIME is not set
# CONFIG_FEATURE_REFORMIME_COMPAT is not set
# CONFIG_SENDMAIL is not set
#
# Process Utilities
#
# CONFIG_FREE is not set
# CONFIG_FUSER is not set
# CONFIG_KILL is not set
# CONFIG_KILLALL is not set
# CONFIG_KILLALL5 is not set
# CONFIG_NMETER is not set
# CONFIG_PGREP is not set
# CONFIG_PIDOF is not set
# CONFIG_FEATURE_PIDOF_SINGLE is not set
# CONFIG_FEATURE_PIDOF_OMIT is not set
# CONFIG_PKILL is not set
# CONFIG_PS is not set
# CONFIG_FEATURE_PS_WIDE is not set
# CONFIG_FEATURE_PS_TIME is not set
# CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS is not set
# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
# CONFIG_RENICE is not set
# CONFIG_BB_SYSCTL is not set
# CONFIG_TOP is not set
# CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE is not set
# CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS is not set
# CONFIG_FEATURE_TOP_SMP_CPU is not set
# CONFIG_FEATURE_TOP_DECIMALS is not set
# CONFIG_FEATURE_TOP_SMP_PROCESS is not set
# CONFIG_FEATURE_TOPMEM is not set
# CONFIG_FEATURE_SHOW_THREADS is not set
# CONFIG_UPTIME is not set
# CONFIG_WATCH is not set
#
# Runit Utilities
#
# CONFIG_RUNSV is not set
# CONFIG_RUNSVDIR is not set
# CONFIG_FEATURE_RUNSVDIR_LOG is not set
# CONFIG_SV is not set
CONFIG_SV_DEFAULT_SERVICE_DIR=""
# CONFIG_SVLOGD is not set
# CONFIG_CHPST is not set
# CONFIG_SETUIDGID is not set
# CONFIG_ENVUIDGID is not set
# CONFIG_ENVDIR is not set
# CONFIG_SOFTLIMIT is not set
# CONFIG_CHCON is not set
# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
# CONFIG_GETENFORCE is not set
# CONFIG_GETSEBOOL is not set
# CONFIG_LOAD_POLICY is not set
# CONFIG_MATCHPATHCON is not set
# CONFIG_RESTORECON is not set
# CONFIG_RUNCON is not set
# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
# CONFIG_SELINUXENABLED is not set
# CONFIG_SETENFORCE is not set
# CONFIG_SETFILES is not set
# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
# CONFIG_SETSEBOOL is not set
# CONFIG_SESTATUS is not set
#
# Shells
#
# CONFIG_ASH is not set
# CONFIG_ASH_BASH_COMPAT is not set
# CONFIG_ASH_JOB_CONTROL is not set
# CONFIG_ASH_ALIAS is not set
# CONFIG_ASH_GETOPTS is not set
# CONFIG_ASH_BUILTIN_ECHO is not set
# CONFIG_ASH_BUILTIN_PRINTF is not set
# CONFIG_ASH_BUILTIN_TEST is not set
# CONFIG_ASH_CMDCMD is not set
# CONFIG_ASH_MAIL is not set
# CONFIG_ASH_OPTIMIZE_FOR_SIZE is not set
# CONFIG_ASH_RANDOM_SUPPORT is not set
# CONFIG_ASH_EXPAND_PRMT is not set
# CONFIG_HUSH is not set
# CONFIG_HUSH_BASH_COMPAT is not set
# CONFIG_HUSH_HELP is not set
# CONFIG_HUSH_INTERACTIVE is not set
# CONFIG_HUSH_JOB is not set
# CONFIG_HUSH_TICK is not set
# CONFIG_HUSH_IF is not set
# CONFIG_HUSH_LOOPS is not set
# CONFIG_HUSH_CASE is not set
# CONFIG_HUSH_FUNCTIONS is not set
# CONFIG_HUSH_LOCAL is not set
# CONFIG_HUSH_EXPORT_N is not set
# CONFIG_HUSH_RANDOM_SUPPORT is not set
# CONFIG_FEATURE_SH_IS_ASH is not set
# CONFIG_FEATURE_SH_IS_HUSH is not set
CONFIG_FEATURE_SH_IS_NONE=y
# CONFIG_FEATURE_BASH_IS_ASH is not set
# CONFIG_FEATURE_BASH_IS_HUSH is not set
CONFIG_FEATURE_BASH_IS_NONE=y
# CONFIG_LASH is not set
# CONFIG_MSH is not set
# CONFIG_SH_MATH_SUPPORT is not set
# CONFIG_SH_MATH_SUPPORT_64 is not set
# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
# CONFIG_FEATURE_SH_STANDALONE is not set
# CONFIG_FEATURE_SH_NOFORK is not set
# CONFIG_CTTYHACK is not set
#
# System Logging Utilities
#
# CONFIG_SYSLOGD is not set
# CONFIG_FEATURE_ROTATE_LOGFILE is not set
# CONFIG_FEATURE_REMOTE_LOG is not set
# CONFIG_FEATURE_SYSLOGD_DUP is not set
CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=0
# CONFIG_FEATURE_IPC_SYSLOG is not set
CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=0
# CONFIG_LOGREAD is not set
# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
# CONFIG_KLOGD is not set
# CONFIG_LOGGER is not set
-942
View File
@@ -1,942 +0,0 @@
#
# Automatically generated make config: don't edit
# Busybox version: 1.17.0.git
# Fri Apr 16 22:25:22 2010
#
CONFIG_HAVE_DOT_CONFIG=y
#
# Busybox Settings
#
#
# General Configuration
#
# CONFIG_DESKTOP is not set
# CONFIG_EXTRA_COMPAT is not set
CONFIG_INCLUDE_SUSv2=y
# CONFIG_USE_PORTABLE_CODE is not set
CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
CONFIG_SHOW_USAGE=y
CONFIG_FEATURE_VERBOSE_USAGE=y
CONFIG_FEATURE_COMPRESS_USAGE=y
CONFIG_FEATURE_INSTALLER=y
CONFIG_LOCALE_SUPPORT=y
CONFIG_UNICODE_SUPPORT=y
# CONFIG_UNICODE_USING_LOCALE is not set
# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set
CONFIG_SUBST_WCHAR=63
CONFIG_LAST_SUPPORTED_WCHAR=767
# CONFIG_UNICODE_COMBINING_WCHARS is not set
# CONFIG_UNICODE_WIDE_WCHARS is not set
# CONFIG_UNICODE_BIDI_SUPPORT is not set
# CONFIG_UNICODE_NEUTRAL_TABLE is not set
CONFIG_LONG_OPTS=y
CONFIG_FEATURE_DEVPTS=y
# CONFIG_FEATURE_CLEAN_UP is not set
CONFIG_FEATURE_UTMP=y
CONFIG_FEATURE_WTMP=y
CONFIG_FEATURE_PIDFILE=y
CONFIG_FEATURE_SUID=y
CONFIG_FEATURE_SUID_CONFIG=y
CONFIG_FEATURE_SUID_CONFIG_QUIET=y
# CONFIG_SELINUX is not set
# CONFIG_FEATURE_PREFER_APPLETS is not set
CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
CONFIG_FEATURE_SYSLOG=y
CONFIG_FEATURE_HAVE_RPC=y
#
# Build Options
#
# CONFIG_STATIC is not set
# CONFIG_PIE is not set
# CONFIG_NOMMU is not set
# CONFIG_BUILD_LIBBUSYBOX is not set
# CONFIG_FEATURE_INDIVIDUAL is not set
# CONFIG_FEATURE_SHARED_BUSYBOX is not set
CONFIG_LFS=y
CONFIG_CROSS_COMPILER_PREFIX=""
CONFIG_EXTRA_CFLAGS=""
#
# Debugging Options
#
# CONFIG_DEBUG is not set
# CONFIG_DEBUG_PESSIMIZE is not set
# CONFIG_WERROR is not set
CONFIG_NO_DEBUG_LIB=y
# CONFIG_DMALLOC is not set
# CONFIG_EFENCE is not set
#
# Installation Options
#
# CONFIG_INSTALL_NO_USR is not set
CONFIG_INSTALL_APPLET_SYMLINKS=y
# CONFIG_INSTALL_APPLET_HARDLINKS is not set
# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
# CONFIG_INSTALL_APPLET_DONT is not set
# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
CONFIG_PREFIX="./_install"
#
# Busybox Library Tuning
#
CONFIG_PASSWORD_MINLEN=6
CONFIG_MD5_SIZE_VS_SPEED=2
CONFIG_FEATURE_FAST_TOP=y
# CONFIG_FEATURE_ETC_NETWORKS is not set
CONFIG_FEATURE_EDITING=y
CONFIG_FEATURE_EDITING_MAX_LEN=1024
# CONFIG_FEATURE_EDITING_VI is not set
CONFIG_FEATURE_EDITING_HISTORY=15
CONFIG_FEATURE_EDITING_SAVEHISTORY=y
CONFIG_FEATURE_TAB_COMPLETION=y
# CONFIG_FEATURE_USERNAME_COMPLETION is not set
# CONFIG_FEATURE_EDITING_FANCY_PROMPT is not set
# CONFIG_FEATURE_EDITING_ASK_TERMINAL is not set
CONFIG_FEATURE_NON_POSIX_CP=y
# CONFIG_FEATURE_VERBOSE_CP_MESSAGE is not set
CONFIG_FEATURE_COPYBUF_KB=4
# CONFIG_MONOTONIC_SYSCALL is not set
CONFIG_IOCTL_HEX2STR_ERROR=y
# CONFIG_FEATURE_HWIB is not set
#
# Applets
#
#
# Archival Utilities
#
CONFIG_FEATURE_SEAMLESS_LZMA=y
CONFIG_FEATURE_SEAMLESS_BZ2=y
CONFIG_FEATURE_SEAMLESS_GZ=y
CONFIG_FEATURE_SEAMLESS_Z=y
CONFIG_AR=y
CONFIG_FEATURE_AR_LONG_FILENAMES=y
CONFIG_FEATURE_AR_CREATE=y
CONFIG_BUNZIP2=y
CONFIG_BZIP2=y
CONFIG_CPIO=y
CONFIG_FEATURE_CPIO_O=y
CONFIG_FEATURE_CPIO_P=y
# CONFIG_DPKG is not set
# CONFIG_DPKG_DEB is not set
# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
CONFIG_GUNZIP=y
CONFIG_GZIP=y
CONFIG_FEATURE_GZIP_LONG_OPTIONS=y
CONFIG_LZOP=y
# CONFIG_LZOP_COMPR_HIGH is not set
CONFIG_RPM2CPIO=y
CONFIG_RPM=y
CONFIG_TAR=y
CONFIG_FEATURE_TAR_CREATE=y
CONFIG_FEATURE_TAR_AUTODETECT=y
CONFIG_FEATURE_TAR_FROM=y
CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY=y
CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY=y
CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
CONFIG_FEATURE_TAR_LONG_OPTIONS=y
CONFIG_FEATURE_TAR_UNAME_GNAME=y
CONFIG_FEATURE_TAR_NOPRESERVE_TIME=y
# CONFIG_FEATURE_TAR_SELINUX is not set
CONFIG_UNCOMPRESS=y
CONFIG_UNLZMA=y
CONFIG_FEATURE_LZMA_FAST=y
CONFIG_UNZIP=y
#
# Coreutils
#
CONFIG_BASENAME=y
CONFIG_CAL=y
CONFIG_CAT=y
CONFIG_CATV=y
CONFIG_CHGRP=y
CONFIG_CHMOD=y
CONFIG_CHOWN=y
CONFIG_FEATURE_CHOWN_LONG_OPTIONS=y
CONFIG_CHROOT=y
CONFIG_CKSUM=y
CONFIG_COMM=y
CONFIG_CP=y
CONFIG_FEATURE_CP_LONG_OPTIONS=y
CONFIG_CUT=y
CONFIG_DATE=y
CONFIG_FEATURE_DATE_ISOFMT=y
CONFIG_FEATURE_DATE_COMPAT=y
CONFIG_DD=y
CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
CONFIG_FEATURE_DD_THIRD_STATUS_LINE=y
CONFIG_FEATURE_DD_IBS_OBS=y
CONFIG_DF=y
CONFIG_FEATURE_DF_FANCY=y
CONFIG_DIRNAME=y
CONFIG_DOS2UNIX=y
CONFIG_UNIX2DOS=y
CONFIG_DU=y
CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
CONFIG_ECHO=y
CONFIG_FEATURE_FANCY_ECHO=y
CONFIG_ENV=y
CONFIG_FEATURE_ENV_LONG_OPTIONS=y
CONFIG_EXPAND=y
CONFIG_FEATURE_EXPAND_LONG_OPTIONS=y
CONFIG_EXPR=y
CONFIG_EXPR_MATH_SUPPORT_64=y
CONFIG_FALSE=y
CONFIG_FOLD=y
CONFIG_FSYNC=y
CONFIG_HEAD=y
CONFIG_FEATURE_FANCY_HEAD=y
CONFIG_HOSTID=y
CONFIG_ID=y
CONFIG_INSTALL=y
CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
CONFIG_LENGTH=y
CONFIG_LN=y
CONFIG_LOGNAME=y
CONFIG_LS=y
CONFIG_FEATURE_LS_FILETYPES=y
CONFIG_FEATURE_LS_FOLLOWLINKS=y
CONFIG_FEATURE_LS_RECURSIVE=y
CONFIG_FEATURE_LS_SORTFILES=y
CONFIG_FEATURE_LS_TIMESTAMPS=y
CONFIG_FEATURE_LS_USERNAME=y
CONFIG_FEATURE_LS_COLOR=y
CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
CONFIG_MD5SUM=y
CONFIG_MKDIR=y
CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
CONFIG_MKFIFO=y
CONFIG_MKNOD=y
CONFIG_MV=y
CONFIG_FEATURE_MV_LONG_OPTIONS=y
CONFIG_NICE=y
CONFIG_NOHUP=y
CONFIG_OD=y
CONFIG_PRINTENV=y
CONFIG_PRINTF=y
CONFIG_PWD=y
CONFIG_READLINK=y
CONFIG_FEATURE_READLINK_FOLLOW=y
CONFIG_REALPATH=y
CONFIG_RM=y
CONFIG_RMDIR=y
CONFIG_FEATURE_RMDIR_LONG_OPTIONS=y
CONFIG_SEQ=y
CONFIG_SHA1SUM=y
CONFIG_SHA256SUM=y
CONFIG_SHA512SUM=y
CONFIG_SLEEP=y
CONFIG_FEATURE_FANCY_SLEEP=y
CONFIG_FEATURE_FLOAT_SLEEP=y
CONFIG_SORT=y
CONFIG_FEATURE_SORT_BIG=y
CONFIG_SPLIT=y
CONFIG_FEATURE_SPLIT_FANCY=y
CONFIG_STAT=y
CONFIG_FEATURE_STAT_FORMAT=y
CONFIG_STTY=y
CONFIG_SUM=y
CONFIG_SYNC=y
CONFIG_TAC=y
CONFIG_TAIL=y
CONFIG_FEATURE_FANCY_TAIL=y
CONFIG_TEE=y
CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
CONFIG_TEST=y
CONFIG_FEATURE_TEST_64=y
CONFIG_TOUCH=y
CONFIG_TR=y
CONFIG_FEATURE_TR_CLASSES=y
CONFIG_FEATURE_TR_EQUIV=y
CONFIG_TRUE=y
CONFIG_TTY=y
CONFIG_UNAME=y
CONFIG_UNEXPAND=y
CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS=y
CONFIG_UNIQ=y
CONFIG_USLEEP=y
CONFIG_UUDECODE=y
CONFIG_UUENCODE=y
CONFIG_WC=y
CONFIG_FEATURE_WC_LARGE=y
CONFIG_WHO=y
CONFIG_WHOAMI=y
CONFIG_YES=y
#
# Common options for cp and mv
#
CONFIG_FEATURE_PRESERVE_HARDLINKS=y
#
# Common options for ls, more and telnet
#
CONFIG_FEATURE_AUTOWIDTH=y
#
# Common options for df, du, ls
#
CONFIG_FEATURE_HUMAN_READABLE=y
#
# Common options for md5sum, sha1sum, sha256sum, sha512sum
#
CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
#
# Console Utilities
#
CONFIG_CHVT=y
CONFIG_CLEAR=y
CONFIG_DEALLOCVT=y
CONFIG_DUMPKMAP=y
CONFIG_KBD_MODE=y
CONFIG_LOADFONT=y
CONFIG_LOADKMAP=y
CONFIG_OPENVT=y
CONFIG_RESET=y
CONFIG_RESIZE=y
CONFIG_FEATURE_RESIZE_PRINT=y
CONFIG_SETCONSOLE=y
CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS=y
CONFIG_SETFONT=y
CONFIG_FEATURE_SETFONT_TEXTUAL_MAP=y
CONFIG_DEFAULT_SETFONT_DIR=""
CONFIG_SETKEYCODES=y
CONFIG_SETLOGCONS=y
CONFIG_SHOWKEY=y
#
# Common options for loadfont and setfont
#
# CONFIG_FEATURE_LOADFONT_PSF2 is not set
# CONFIG_FEATURE_LOADFONT_RAW is not set
#
# Debian Utilities
#
CONFIG_MKTEMP=y
CONFIG_PIPE_PROGRESS=y
CONFIG_RUN_PARTS=y
CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
CONFIG_FEATURE_RUN_PARTS_FANCY=y
CONFIG_START_STOP_DAEMON=y
CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
CONFIG_WHICH=y
#
# Editors
#
CONFIG_AWK=y
CONFIG_FEATURE_AWK_LIBM=y
CONFIG_CMP=y
CONFIG_DIFF=y
CONFIG_FEATURE_DIFF_LONG_OPTIONS=y
CONFIG_FEATURE_DIFF_DIR=y
CONFIG_ED=y
CONFIG_PATCH=y
CONFIG_SED=y
CONFIG_VI=y
CONFIG_FEATURE_VI_MAX_LEN=4096
# CONFIG_FEATURE_VI_8BIT is not set
CONFIG_FEATURE_VI_COLON=y
CONFIG_FEATURE_VI_YANKMARK=y
CONFIG_FEATURE_VI_SEARCH=y
CONFIG_FEATURE_VI_USE_SIGNALS=y
CONFIG_FEATURE_VI_DOT_CMD=y
CONFIG_FEATURE_VI_READONLY=y
CONFIG_FEATURE_VI_SETOPTS=y
CONFIG_FEATURE_VI_SET=y
CONFIG_FEATURE_VI_WIN_RESIZE=y
CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
CONFIG_FEATURE_ALLOW_EXEC=y
#
# Finding Utilities
#
CONFIG_FIND=y
CONFIG_FEATURE_FIND_PRINT0=y
CONFIG_FEATURE_FIND_MTIME=y
CONFIG_FEATURE_FIND_MMIN=y
CONFIG_FEATURE_FIND_PERM=y
CONFIG_FEATURE_FIND_TYPE=y
CONFIG_FEATURE_FIND_XDEV=y
CONFIG_FEATURE_FIND_MAXDEPTH=y
CONFIG_FEATURE_FIND_NEWER=y
CONFIG_FEATURE_FIND_INUM=y
CONFIG_FEATURE_FIND_EXEC=y
CONFIG_FEATURE_FIND_USER=y
CONFIG_FEATURE_FIND_GROUP=y
CONFIG_FEATURE_FIND_NOT=y
CONFIG_FEATURE_FIND_DEPTH=y
CONFIG_FEATURE_FIND_PAREN=y
CONFIG_FEATURE_FIND_SIZE=y
CONFIG_FEATURE_FIND_PRUNE=y
CONFIG_FEATURE_FIND_DELETE=y
CONFIG_FEATURE_FIND_PATH=y
CONFIG_FEATURE_FIND_REGEX=y
# CONFIG_FEATURE_FIND_CONTEXT is not set
CONFIG_FEATURE_FIND_LINKS=y
CONFIG_GREP=y
CONFIG_FEATURE_GREP_EGREP_ALIAS=y
CONFIG_FEATURE_GREP_FGREP_ALIAS=y
CONFIG_FEATURE_GREP_CONTEXT=y
CONFIG_XARGS=y
CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION=y
CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
#
# Init Utilities
#
CONFIG_INIT=y
CONFIG_FEATURE_USE_INITTAB=y
# CONFIG_FEATURE_KILL_REMOVED is not set
CONFIG_FEATURE_KILL_DELAY=0
CONFIG_FEATURE_INIT_SCTTY=y
CONFIG_FEATURE_INIT_SYSLOG=y
CONFIG_FEATURE_EXTRA_QUIET=y
CONFIG_FEATURE_INIT_COREDUMPS=y
CONFIG_FEATURE_INITRD=y
CONFIG_HALT=y
# CONFIG_FEATURE_CALL_TELINIT is not set
CONFIG_TELINIT_PATH=""
CONFIG_MESG=y
#
# Login/Password Management Utilities
#
CONFIG_FEATURE_SHADOWPASSWDS=y
CONFIG_USE_BB_PWD_GRP=y
CONFIG_USE_BB_SHADOW=y
CONFIG_USE_BB_CRYPT=y
CONFIG_USE_BB_CRYPT_SHA=y
CONFIG_ADDGROUP=y
CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS=y
CONFIG_FEATURE_ADDUSER_TO_GROUP=y
CONFIG_DELGROUP=y
CONFIG_FEATURE_DEL_USER_FROM_GROUP=y
# CONFIG_FEATURE_CHECK_NAMES is not set
CONFIG_ADDUSER=y
CONFIG_FEATURE_ADDUSER_LONG_OPTIONS=y
CONFIG_FIRST_SYSTEM_ID=100
CONFIG_LAST_SYSTEM_ID=999
CONFIG_DELUSER=y
CONFIG_GETTY=y
CONFIG_LOGIN=y
# CONFIG_PAM is not set
CONFIG_LOGIN_SCRIPTS=y
CONFIG_FEATURE_NOLOGIN=y
CONFIG_FEATURE_SECURETTY=y
CONFIG_PASSWD=y
CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
CONFIG_CRYPTPW=y
CONFIG_CHPASSWD=y
CONFIG_SU=y
CONFIG_FEATURE_SU_SYSLOG=y
CONFIG_FEATURE_SU_CHECKS_SHELLS=y
CONFIG_SULOGIN=y
CONFIG_VLOCK=y
#
# Linux Ext2 FS Progs
#
CONFIG_CHATTR=y
CONFIG_FSCK=y
CONFIG_LSATTR=y
#
# Linux Module Utilities
#
CONFIG_MODPROBE_SMALL=y
CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE=y
CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED=y
# CONFIG_INSMOD is not set
# CONFIG_RMMOD is not set
# CONFIG_LSMOD is not set
# CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT is not set
# CONFIG_MODPROBE is not set
# CONFIG_FEATURE_MODPROBE_BLACKLIST is not set
# CONFIG_DEPMOD is not set
#
# Options common to multiple modutils
#
# CONFIG_FEATURE_2_4_MODULES is not set
# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
# CONFIG_FEATURE_CHECK_TAINTED_MODULE is not set
# CONFIG_FEATURE_MODUTILS_ALIAS is not set
# CONFIG_FEATURE_MODUTILS_SYMBOLS is not set
CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
#
# Linux System Utilities
#
# CONFIG_ACPID is not set
# CONFIG_FEATURE_ACPID_COMPAT is not set
CONFIG_BLKID=y
CONFIG_DMESG=y
CONFIG_FEATURE_DMESG_PRETTY=y
CONFIG_FBSET=y
CONFIG_FEATURE_FBSET_FANCY=y
CONFIG_FEATURE_FBSET_READMODE=y
CONFIG_FDFLUSH=y
CONFIG_FDFORMAT=y
CONFIG_FDISK=y
CONFIG_FDISK_SUPPORT_LARGE_DISKS=y
CONFIG_FEATURE_FDISK_WRITABLE=y
# CONFIG_FEATURE_AIX_LABEL is not set
# CONFIG_FEATURE_SGI_LABEL is not set
# CONFIG_FEATURE_SUN_LABEL is not set
# CONFIG_FEATURE_OSF_LABEL is not set
CONFIG_FEATURE_FDISK_ADVANCED=y
CONFIG_FINDFS=y
# CONFIG_FLOCK is not set
CONFIG_FREERAMDISK=y
CONFIG_FSCK_MINIX=y
# CONFIG_MKFS_EXT2 is not set
CONFIG_MKFS_MINIX=y
#
# Minix filesystem support
#
CONFIG_FEATURE_MINIX2=y
# CONFIG_MKFS_REISER is not set
CONFIG_MKFS_VFAT=y
CONFIG_GETOPT=y
CONFIG_FEATURE_GETOPT_LONG=y
CONFIG_HEXDUMP=y
CONFIG_FEATURE_HEXDUMP_REVERSE=y
CONFIG_HD=y
CONFIG_HWCLOCK=y
CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
CONFIG_IPCRM=y
CONFIG_IPCS=y
CONFIG_LOSETUP=y
CONFIG_LSPCI=y
CONFIG_LSUSB=y
CONFIG_MDEV=y
CONFIG_FEATURE_MDEV_CONF=y
CONFIG_FEATURE_MDEV_RENAME=y
CONFIG_FEATURE_MDEV_RENAME_REGEXP=y
CONFIG_FEATURE_MDEV_EXEC=y
CONFIG_FEATURE_MDEV_LOAD_FIRMWARE=y
CONFIG_MKSWAP=y
CONFIG_FEATURE_MKSWAP_UUID=y
CONFIG_MORE=y
CONFIG_FEATURE_USE_TERMIOS=y
CONFIG_VOLUMEID=y
CONFIG_FEATURE_VOLUMEID_EXT=y
CONFIG_FEATURE_VOLUMEID_BTRFS=y
CONFIG_FEATURE_VOLUMEID_REISERFS=y
CONFIG_FEATURE_VOLUMEID_FAT=y
CONFIG_FEATURE_VOLUMEID_HFS=y
CONFIG_FEATURE_VOLUMEID_JFS=y
CONFIG_FEATURE_VOLUMEID_XFS=y
CONFIG_FEATURE_VOLUMEID_NTFS=y
CONFIG_FEATURE_VOLUMEID_ISO9660=y
CONFIG_FEATURE_VOLUMEID_UDF=y
CONFIG_FEATURE_VOLUMEID_LUKS=y
CONFIG_FEATURE_VOLUMEID_LINUXSWAP=y
CONFIG_FEATURE_VOLUMEID_CRAMFS=y
CONFIG_FEATURE_VOLUMEID_ROMFS=y
CONFIG_FEATURE_VOLUMEID_SYSV=y
CONFIG_FEATURE_VOLUMEID_OCFS2=y
CONFIG_FEATURE_VOLUMEID_LINUXRAID=y
CONFIG_MOUNT=y
CONFIG_FEATURE_MOUNT_FAKE=y
CONFIG_FEATURE_MOUNT_VERBOSE=y
# CONFIG_FEATURE_MOUNT_HELPERS is not set
CONFIG_FEATURE_MOUNT_LABEL=y
CONFIG_FEATURE_MOUNT_NFS=y
CONFIG_FEATURE_MOUNT_CIFS=y
CONFIG_FEATURE_MOUNT_FLAGS=y
CONFIG_FEATURE_MOUNT_FSTAB=y
CONFIG_PIVOT_ROOT=y
CONFIG_RDATE=y
CONFIG_RDEV=y
CONFIG_READPROFILE=y
CONFIG_RTCWAKE=y
CONFIG_SCRIPT=y
CONFIG_SCRIPTREPLAY=y
CONFIG_SETARCH=y
CONFIG_SWAPONOFF=y
CONFIG_FEATURE_SWAPON_PRI=y
CONFIG_SWITCH_ROOT=y
CONFIG_UMOUNT=y
CONFIG_FEATURE_UMOUNT_ALL=y
#
# Common options for mount/umount
#
CONFIG_FEATURE_MOUNT_LOOP=y
# CONFIG_FEATURE_MOUNT_LOOP_CREATE is not set
# CONFIG_FEATURE_MTAB_SUPPORT is not set
#
# Miscellaneous Utilities
#
CONFIG_ADJTIMEX=y
# CONFIG_BBCONFIG is not set
CONFIG_BEEP=y
CONFIG_FEATURE_BEEP_FREQ=4000
CONFIG_FEATURE_BEEP_LENGTH_MS=30
CONFIG_CHAT=y
CONFIG_FEATURE_CHAT_NOFAIL=y
# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
CONFIG_FEATURE_CHAT_IMPLICIT_CR=y
CONFIG_FEATURE_CHAT_SWALLOW_OPTS=y
CONFIG_FEATURE_CHAT_SEND_ESCAPES=y
CONFIG_FEATURE_CHAT_VAR_ABORT_LEN=y
CONFIG_FEATURE_CHAT_CLR_ABORT=y
CONFIG_CHRT=y
CONFIG_CROND=y
CONFIG_FEATURE_CROND_D=y
CONFIG_FEATURE_CROND_CALL_SENDMAIL=y
CONFIG_FEATURE_CROND_DIR="/var/spool/cron"
CONFIG_CRONTAB=y
CONFIG_DC=y
CONFIG_FEATURE_DC_LIBM=y
# CONFIG_DEVFSD is not set
# CONFIG_DEVFSD_MODLOAD is not set
# CONFIG_DEVFSD_FG_NP is not set
# CONFIG_DEVFSD_VERBOSE is not set
# CONFIG_FEATURE_DEVFS is not set
CONFIG_DEVMEM=y
CONFIG_EJECT=y
CONFIG_FEATURE_EJECT_SCSI=y
CONFIG_FBSPLASH=y
# CONFIG_FLASHCP is not set
# CONFIG_FLASH_LOCK is not set
# CONFIG_FLASH_UNLOCK is not set
# CONFIG_FLASH_ERASEALL is not set
# CONFIG_IONICE is not set
# CONFIG_INOTIFYD is not set
CONFIG_LAST=y
# CONFIG_FEATURE_LAST_SMALL is not set
CONFIG_FEATURE_LAST_FANCY=y
CONFIG_LESS=y
CONFIG_FEATURE_LESS_MAXLINES=9999999
CONFIG_FEATURE_LESS_BRACKETS=y
CONFIG_FEATURE_LESS_FLAGS=y
CONFIG_FEATURE_LESS_MARKS=y
CONFIG_FEATURE_LESS_REGEXP=y
CONFIG_FEATURE_LESS_WINCH=y
CONFIG_FEATURE_LESS_DASHCMD=y
CONFIG_FEATURE_LESS_LINENUMS=y
CONFIG_HDPARM=y
CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF=y
CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF=y
CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET=y
CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF=y
CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA=y
CONFIG_MAKEDEVS=y
# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
CONFIG_FEATURE_MAKEDEVS_TABLE=y
CONFIG_MAN=y
CONFIG_MICROCOM=y
CONFIG_MOUNTPOINT=y
CONFIG_MT=y
CONFIG_RAIDAUTORUN=y
# CONFIG_READAHEAD is not set
CONFIG_RUNLEVEL=y
CONFIG_RX=y
CONFIG_SETSID=y
CONFIG_STRINGS=y
# CONFIG_TASKSET is not set
# CONFIG_FEATURE_TASKSET_FANCY is not set
CONFIG_TIME=y
CONFIG_TIMEOUT=y
CONFIG_TTYSIZE=y
CONFIG_VOLNAME=y
CONFIG_WALL=y
# CONFIG_WATCHDOG is not set
#
# Networking Utilities
#
CONFIG_FEATURE_IPV6=y
# CONFIG_FEATURE_UNIX_LOCAL is not set
CONFIG_FEATURE_PREFER_IPV4_ADDRESS=y
# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
CONFIG_ARP=y
CONFIG_ARPING=y
CONFIG_BRCTL=y
CONFIG_FEATURE_BRCTL_FANCY=y
CONFIG_FEATURE_BRCTL_SHOW=y
CONFIG_DNSD=y
CONFIG_ETHER_WAKE=y
CONFIG_FAKEIDENTD=y
CONFIG_FTPD=y
CONFIG_FEATURE_FTP_WRITE=y
CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST=y
CONFIG_FTPGET=y
CONFIG_FTPPUT=y
CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS=y
CONFIG_HOSTNAME=y
CONFIG_HTTPD=y
CONFIG_FEATURE_HTTPD_RANGES=y
CONFIG_FEATURE_HTTPD_USE_SENDFILE=y
CONFIG_FEATURE_HTTPD_SETUID=y
CONFIG_FEATURE_HTTPD_BASIC_AUTH=y
CONFIG_FEATURE_HTTPD_AUTH_MD5=y
CONFIG_FEATURE_HTTPD_CGI=y
CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR=y
CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV=y
CONFIG_FEATURE_HTTPD_ENCODE_URL_STR=y
CONFIG_FEATURE_HTTPD_ERROR_PAGES=y
CONFIG_FEATURE_HTTPD_PROXY=y
CONFIG_IFCONFIG=y
CONFIG_FEATURE_IFCONFIG_STATUS=y
CONFIG_FEATURE_IFCONFIG_SLIP=y
CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
CONFIG_FEATURE_IFCONFIG_HW=y
CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS=y
# CONFIG_IFENSLAVE is not set
CONFIG_IFPLUGD=y
CONFIG_IFUPDOWN=y
CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
CONFIG_FEATURE_IFUPDOWN_IP=y
CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
CONFIG_FEATURE_IFUPDOWN_IPV4=y
CONFIG_FEATURE_IFUPDOWN_IPV6=y
CONFIG_FEATURE_IFUPDOWN_MAPPING=y
# CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP is not set
CONFIG_INETD=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
CONFIG_FEATURE_INETD_RPC=y
CONFIG_IP=y
CONFIG_FEATURE_IP_ADDRESS=y
CONFIG_FEATURE_IP_LINK=y
CONFIG_FEATURE_IP_ROUTE=y
CONFIG_FEATURE_IP_TUNNEL=y
CONFIG_FEATURE_IP_RULE=y
CONFIG_FEATURE_IP_SHORT_FORMS=y
# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
CONFIG_IPADDR=y
CONFIG_IPLINK=y
CONFIG_IPROUTE=y
CONFIG_IPTUNNEL=y
CONFIG_IPRULE=y
CONFIG_IPCALC=y
CONFIG_FEATURE_IPCALC_FANCY=y
CONFIG_FEATURE_IPCALC_LONG_OPTIONS=y
CONFIG_NAMEIF=y
CONFIG_FEATURE_NAMEIF_EXTENDED=y
CONFIG_NC=y
CONFIG_NC_SERVER=y
CONFIG_NC_EXTRA=y
CONFIG_NETSTAT=y
CONFIG_FEATURE_NETSTAT_WIDE=y
CONFIG_FEATURE_NETSTAT_PRG=y
CONFIG_NSLOOKUP=y
CONFIG_NTPD=y
CONFIG_FEATURE_NTPD_SERVER=y
CONFIG_PING=y
CONFIG_PING6=y
CONFIG_FEATURE_FANCY_PING=y
CONFIG_PSCAN=y
CONFIG_ROUTE=y
CONFIG_SLATTACH=y
CONFIG_TCPSVD=y
CONFIG_TELNET=y
CONFIG_FEATURE_TELNET_TTYPE=y
CONFIG_FEATURE_TELNET_AUTOLOGIN=y
CONFIG_TELNETD=y
CONFIG_FEATURE_TELNETD_STANDALONE=y
CONFIG_FEATURE_TELNETD_INETD_WAIT=y
CONFIG_TFTP=y
CONFIG_TFTPD=y
CONFIG_FEATURE_TFTP_GET=y
CONFIG_FEATURE_TFTP_PUT=y
CONFIG_FEATURE_TFTP_BLOCKSIZE=y
CONFIG_FEATURE_TFTP_PROGRESS_BAR=y
# CONFIG_TFTP_DEBUG is not set
CONFIG_TRACEROUTE=y
CONFIG_TRACEROUTE6=y
CONFIG_FEATURE_TRACEROUTE_VERBOSE=y
# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
CONFIG_TUNCTL=y
CONFIG_FEATURE_TUNCTL_UG=y
CONFIG_UDHCPD=y
CONFIG_DHCPRELAY=y
CONFIG_DUMPLEASES=y
CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY=y
CONFIG_DHCPD_LEASES_FILE="/var/lib/misc/udhcpd.leases"
CONFIG_UDHCPC=y
CONFIG_FEATURE_UDHCPC_ARPING=y
CONFIG_FEATURE_UDHCP_PORT=y
CONFIG_UDHCP_DEBUG=9
CONFIG_FEATURE_UDHCP_RFC3397=y
CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script"
CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="-R -n"
CONFIG_UDPSVD=y
CONFIG_VCONFIG=y
CONFIG_WGET=y
CONFIG_FEATURE_WGET_STATUSBAR=y
CONFIG_FEATURE_WGET_AUTHENTICATION=y
CONFIG_FEATURE_WGET_LONG_OPTIONS=y
CONFIG_ZCIP=y
#
# Print Utilities
#
CONFIG_LPD=y
CONFIG_LPR=y
CONFIG_LPQ=y
#
# Mail Utilities
#
CONFIG_MAKEMIME=y
CONFIG_FEATURE_MIME_CHARSET="us-ascii"
CONFIG_POPMAILDIR=y
CONFIG_FEATURE_POPMAILDIR_DELIVERY=y
CONFIG_REFORMIME=y
CONFIG_FEATURE_REFORMIME_COMPAT=y
CONFIG_SENDMAIL=y
#
# Process Utilities
#
CONFIG_FREE=y
CONFIG_FUSER=y
CONFIG_KILL=y
CONFIG_KILLALL=y
CONFIG_KILLALL5=y
CONFIG_NMETER=y
CONFIG_PGREP=y
CONFIG_PIDOF=y
CONFIG_FEATURE_PIDOF_SINGLE=y
CONFIG_FEATURE_PIDOF_OMIT=y
CONFIG_PKILL=y
CONFIG_PS=y
CONFIG_FEATURE_PS_WIDE=y
# CONFIG_FEATURE_PS_TIME is not set
# CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS is not set
# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
CONFIG_RENICE=y
CONFIG_BB_SYSCTL=y
CONFIG_TOP=y
CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
CONFIG_FEATURE_TOP_SMP_CPU=y
CONFIG_FEATURE_TOP_DECIMALS=y
CONFIG_FEATURE_TOP_SMP_PROCESS=y
CONFIG_FEATURE_TOPMEM=y
CONFIG_FEATURE_SHOW_THREADS=y
CONFIG_UPTIME=y
CONFIG_WATCH=y
#
# Runit Utilities
#
CONFIG_RUNSV=y
CONFIG_RUNSVDIR=y
# CONFIG_FEATURE_RUNSVDIR_LOG is not set
CONFIG_SV=y
CONFIG_SV_DEFAULT_SERVICE_DIR="/var/service"
CONFIG_SVLOGD=y
CONFIG_CHPST=y
CONFIG_SETUIDGID=y
CONFIG_ENVUIDGID=y
CONFIG_ENVDIR=y
CONFIG_SOFTLIMIT=y
# CONFIG_CHCON is not set
# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
# CONFIG_GETENFORCE is not set
# CONFIG_GETSEBOOL is not set
# CONFIG_LOAD_POLICY is not set
# CONFIG_MATCHPATHCON is not set
# CONFIG_RESTORECON is not set
# CONFIG_RUNCON is not set
# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
# CONFIG_SELINUXENABLED is not set
# CONFIG_SETENFORCE is not set
# CONFIG_SETFILES is not set
# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
# CONFIG_SETSEBOOL is not set
# CONFIG_SESTATUS is not set
#
# Shells
#
CONFIG_FEATURE_SH_IS_ASH=y
# CONFIG_FEATURE_SH_IS_HUSH is not set
# CONFIG_FEATURE_SH_IS_NONE is not set
CONFIG_ASH=y
CONFIG_ASH_BASH_COMPAT=y
CONFIG_ASH_JOB_CONTROL=y
CONFIG_ASH_ALIAS=y
CONFIG_ASH_GETOPTS=y
CONFIG_ASH_BUILTIN_ECHO=y
CONFIG_ASH_BUILTIN_PRINTF=y
CONFIG_ASH_BUILTIN_TEST=y
CONFIG_ASH_CMDCMD=y
# CONFIG_ASH_MAIL is not set
CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
CONFIG_ASH_RANDOM_SUPPORT=y
CONFIG_ASH_EXPAND_PRMT=y
CONFIG_HUSH=y
CONFIG_HUSH_BASH_COMPAT=y
CONFIG_HUSH_HELP=y
CONFIG_HUSH_INTERACTIVE=y
CONFIG_HUSH_JOB=y
CONFIG_HUSH_TICK=y
CONFIG_HUSH_IF=y
CONFIG_HUSH_LOOPS=y
CONFIG_HUSH_CASE=y
CONFIG_HUSH_FUNCTIONS=y
CONFIG_HUSH_LOCAL=y
CONFIG_HUSH_EXPORT_N=y
CONFIG_HUSH_RANDOM_SUPPORT=y
# CONFIG_LASH is not set
CONFIG_MSH=y
CONFIG_SH_MATH_SUPPORT=y
CONFIG_SH_MATH_SUPPORT_64=y
CONFIG_FEATURE_SH_EXTRA_QUIET=y
# CONFIG_FEATURE_SH_STANDALONE is not set
# CONFIG_FEATURE_SH_NOFORK is not set
CONFIG_CTTYHACK=y
#
# System Logging Utilities
#
CONFIG_SYSLOGD=y
CONFIG_FEATURE_ROTATE_LOGFILE=y
CONFIG_FEATURE_REMOTE_LOG=y
CONFIG_FEATURE_SYSLOGD_DUP=y
CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=256
CONFIG_FEATURE_IPC_SYSLOG=y
CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=16
CONFIG_LOGREAD=y
CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING=y
CONFIG_KLOGD=y
CONFIG_LOGGER=y
-276
View File
@@ -1,276 +0,0 @@
Busybox TODO
Harvest patches from
http://git.openembedded.org/cgit.cgi/openembedded/tree/recipes/busybox/
Stuff that needs to be done. This is organized by who plans to get around to
doing it eventually, but that doesn't mean they "own" the item. If you want to
do one of these bounce an email off the person it's listed under to see if they
have any suggestions how they plan to go about it, and to minimize conflicts
between your work and theirs. But otherwise, all of these are fair game.
Rob Landley suggested this:
Implement bb_realpath() that can handle NULL on non-glibc.
sh
The command shell situation is a mess. We have two different
shells that don't really share any code, and the "standalone shell" doesn't
work all that well (especially not in a chroot environment), due to apps not
being reentrant.
Do a SUSv3 audit
Look at the full Single Unix Specification version 3 (available online at
"http://www.opengroup.org/onlinepubs/009695399/nfindex.html") and
figure out which of our apps are compliant, and what we're missing that
we might actually care about.
Even better would be some kind of automated compliance test harness that
exercises each command line option and the various corner cases.
Internationalization
How much internationalization should we do?
The low hanging fruit is UTF-8 character set support. We should do this.
See TODO_unicode file.
We also have lots of hardwired english text messages. Consolidating this
into some kind of message table not only makes translation easier, but
also allows us to consolidate redundant (or close) strings.
We probably don't want to be bloated with locale support. (Not unless we
can cleanly export it from our underlying C library without having to
concern ourselves with it directly. Perhaps a few specific things like a
config option for "date" are low hanging fruit here?)
What level should things happen at? How much do we care about
internationalizing the text console when X11 and xterms are so much better
at it? (There's some infrastructure here we don't implement: The
"unicode_start" and "unicode_stop" shell scripts need "vt-is-UTF8" and a
--unicode option to loadkeys. That implies a real loadkeys/dumpkeys
implementation to replace loadkmap/dumpkmap. Plus messing with console font
loading. Is it worth it, or do we just say "use X"?)
Individual compilation of applets.
It would be nice if busybox had the option to compile to individual applets,
for people who want an alternate implementation less bloated than the gnu
utils (or simply with less political baggage), but without it being one big
executable.
Turning libbb into a real dll is another possibility, especially if libbb
could export some of the other library interfaces we've already more or less
got the code for (like zlib).
buildroot - Make a "dogfood" option
Busybox 1.1 will be capable of replacing most gnu packages for real world
use, such as developing software or in a live CD. It needs wider testing.
Busybox should now be able to replace bzip2, coreutils, e2fsprogs, file,
findutils, gawk, grep, inetutils, less, modutils, net-tools, patch, procps,
sed, shadow, sysklogd, sysvinit, tar, util-linux, and vim. The resulting
system should be self-hosting (I.E. able to rebuild itself from source
code). This means it would need (at least) binutils, gcc, and make, or
equivalents.
It would be a good "eating our own dogfood" test if buildroot had the option
of using a "make allyesconfig" busybox instead of the all of the above
packages. Anything that's wrong with the resulting system, we can fix. (It
would be nice to be able to upgrade busybox to be able to replace bash and
diffutils as well, but we're not there yet.)
One example of an existing system that does this already is Firmware Linux:
http://www.landley.net/code/firmware
initramfs
Busybox should have a sample initramfs build script. This depends on
bbsh, mdev, and switch_root.
mkdep
Write a mkdep that doesn't segfault if there's a directory it doesn't
have permission to read, isn't based on manually editing the output of
lexx and yacc, doesn't make such a mess under include/config, etc.
Group globals into unions of structures.
Go through and turn all the global and static variables into structures,
and have all those structures be in a big union shared between processes,
so busybox uses less bss. (This is a big win on nommu machines.) See
sed.c and mdev.c for examples.
Go through bugs.busybox.net and close out all of that somehow.
This one's open to everybody, but I'll wind up doing it...
Bernhard Reutner-Fischer <busybox@busybox.net> suggests to look at these:
New debug options:
-Wlarger-than-127
Cleanup any big users
Collate BUFSIZ IOBUF_SIZE MY_BUF_SIZE PIPE_PROGRESS_SIZE BUFSIZE PIPESIZE
make bb_common_bufsiz1 configurable, size wise.
make pipesize configurable, size wise.
Use bb_common_bufsiz1 throughout applets!
As yet unclaimed:
----
diff
Make sure we handle empty files properly:
From the patch man page:
you can remove a file by sending out a context diff that compares
the file to be deleted with an empty file dated the Epoch. The
file will be removed unless patch is conforming to POSIX and the
-E or --remove-empty-files option is not given.
---
patch
Should have simple fuzz factor support to apply patches at an offset which
shouldn't take up too much space.
And while we're at it, a new patch filename quoting format is apparently
coming soon: http://marc.theaimsgroup.com/?l=git&m=112927316408690&w=2
---
stty / catv
stty's visible() function and catv's guts are identical. Merge them into
an appropriate libbb function.
---
struct suffix_mult
Several duplicate users of: grep -r "1024\*1024" * -B2 -A1
Merge to a single size_suffixes[] in libbb.
Users: head tail od_bloaty hexdump and (partially as it wouldn't hurt) svlogd
---
tail
./busybox tail -f foo.c~ TODO
should not print fmt=header_fmt for subsequent date >> TODO; i.e. only
fmt+ if another (not the current) file did change
Architectural issues:
bb_close() with fsync()
We should have a bb_close() in place of normal close, with a CONFIG_ option
to not just check the return value of close() for an error, but fsync().
Close can't reliably report anything useful because if write() accepted the
data then it either went out to the network or it's in cache or a pipe
buffer. Either way, there's no guarantee it'll make it to its final
destination before close() gets called, so there's no guarantee that any
error will be reported.
You need to call fsync() if you care about errors that occur after write(),
but that can have a big performance impact. So make it a config option.
---
Unify archivers
Lots of archivers have the same general infrastructure. The directory
traversal code should be factored out, and the guts of each archiver could
be some setup code and a series of callbacks for "add this file",
"add this directory", "add this symlink" and so on.
This could clean up tar and zip, and make it cheaper to add cpio and ar
write support, and possibly even cheaply add things like mkisofs or
mksquashfs someday, if they become relevant.
---
Text buffer support.
Several existing applets (sort, vi, less...) read
a whole file into memory and act on it. Use open_read_close().
---
Memory Allocation
We have a CONFIG_BUFFER mechanism that lets us select whether to do memory
allocation on the stack or the heap. Unfortunately, we're not using it much.
We need to audit our memory allocations and turn a lot of malloc/free calls
into RESERVE_CONFIG_BUFFER/RELEASE_CONFIG_BUFFER.
For a start, see e.g. make EXTRA_CFLAGS=-Wlarger-than-64
And while we're at it, many of the CONFIG_FEATURE_CLEAN_UP #ifdefs will be
optimized out by the compiler in the stack allocation case (since there's no
free for an alloca()), and this means that various cleanup loops that just
call free might also be optimized out by the compiler if written right, so
we can yank those #ifdefs too, and generally clean up the code.
---
FEATURE_CLEAN_UP
This is more an unresolved issue than a to-do item. More thought is needed.
Normally we rely on exit() to free memory, close files and unmap segments
for us. This makes most calls to free(), close(), and unmap() optional in
busybox applets that don't intend to run for very long, and optional stuff
can be omitted to save size.
The idea was raised that we could simulate fork/exit with setjmp/longjmp
for _really_ brainless embedded systems, or speed up the standalone shell
by not forking. Doing so would require a reliable FEATURE_CLEAN_UP.
Unfortunately, this isn't as easy as it sounds.
The problem is, lots of things exit(), sometimes unexpectedly (xmalloc())
and sometimes reliably (bb_perror_msg_and_die() or show_usage()). This
jumps out of the normal flow control and bypasses any cleanup code we
put at the end of our applets.
It's possible to add hooks to libbb functions like xmalloc() and xopen()
to add their entries to a linked list, which could be traversed and
freed/closed automatically. (This would need to be able to free just the
entries after a checkpoint to be usable for a forkless standalone shell.
You don't want to free the shell's own resources.)
Right now, FEATURE_CLEAN_UP is more or less a debugging aid, to make things
like valgrind happy. It's also documentation of _what_ we're trusting
exit() to clean up for us. But new infrastructure to auto-free stuff would
render the existing FEATURE_CLEAN_UP code redundant.
For right now, exit() handles it just fine.
Minor stuff:
watchdog.c could autodetect the timer duration via:
if(!ioctl (fd, WDIOC_GETTIMEOUT, &tmo)) timer_duration = 1 + (tmo / 2);
Unfortunately, that needs linux/watchdog.h and that contains unfiltered
kernel types on some distros, which breaks the build.
---
use bb_error_msg where appropriate: See
egrep "(printf.*\([[:space:]]*(stderr|2)|[^_]write.*\([[:space:]]*(stderr|2))"
---
use bb_perror_msg where appropriate: See
egrep "[^_]perror"
---
possible code duplication ingroup() and is_a_group_member()
---
Move __get_hz() to a better place and (re)use it in route.c, ash.c
---
See grep -r strtod
Alot of duplication that wants cleanup.
---
in_ether duplicated in network/{interface,ifconfig}.c
---
unify progress_meter. wget, flash_eraseall, pipe_progress, fbsplash, setfiles.
---
support start-stop-daemon -d <chdir-path>
---
vdprintf() -> similar sized functionality
---
(TODO list after discussion 11.05.2009)
* shrink tc/brctl/ip
tc/brctl seem like fairly large things to try and tackle in your timeframe,
and i think people have posted attempts in the past. Adding additional
options to ip though seems reasonable.
* add tests for some applets
* implement POSIX utilities and audit them for POSIX conformance. then
audit them for GNU conformance. then document all your findings in a new
doc/conformance.txt file while perhaps implementing some of the missing
features.
you can find the latest POSIX documentation (1003.1-2008) here:
http://www.opengroup.org/onlinepubs/9699919799/
and the complete list of all utilities that POSIX covers:
http://www.opengroup.org/onlinepubs/9699919799/idx/utilities.html
The first step would to generate a file/matrix what is already archived
(also IPV6)
* implement 'at'
* rpcbind (former portmap) or equivalent
so that we don't have to use -o nolock on nfs mounts
* check IPV6 compliance
* generate a mini example using kernel+busybox only (+libc) for example
* more support for advanced linux 2.6.x features, see: iotop
most likely there is more
* even more support for statistics: mpstat, iostat, powertop....
-45
View File
@@ -1,45 +0,0 @@
Already fixed applets:
cal
lsmod
df
dumpleases
Applets which may need unicode handling (more extensive than sanitizing
of filenames in error messages):
ls - work in progress
expand, unexpand - uses unicode_strlen, not scrlen
ash, hush through lineedit - uses unicode_strlen, not scrlen
top - need to sanitize process args
ps - need to sanitize process args
less
more
vi
ed
cut
awk
sed
tr
grep egrep fgrep
fold
sort
head, tail
catv - "display nonprinting chars" - what this could mean for unicode?
wc
chat
dumpkmap
last - just line up columns
man
microcom
strings
watch
Unsure, may need fixing:
hostname - do we really want to protect against bad chars in it?
patch
addgroup, adduser, delgroup, deluser
telnet
telnetd
od
printf
-2
View File
@@ -1,2 +0,0 @@
/applet_tables
/usage
-44
View File
@@ -1,44 +0,0 @@
# Makefile for busybox
#
# Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
#
# Licensed under the GPL v2, see the file LICENSE in this tarball.
obj-y :=
obj-y += applets.o
hostprogs-y:=
hostprogs-y += usage usage_pod applet_tables
always:= $(hostprogs-y)
# Generated files need additional love
# This trick decreases amount of rebuilds
# if tree is merely renamed/copied
ifeq ($(srctree),$(objtree))
srctree_slash =
else
srctree_slash = $(srctree)/
endif
HOSTCFLAGS_usage.o = -I$(srctree_slash)include -Iinclude
HOSTCFLAGS_usage_pod.o = -I$(srctree_slash)include -Iinclude
applets/applets.o: include/usage_compressed.h include/applet_tables.h
applets/applet_tables: .config include/applets.h
applets/usage: .config include/applets.h
applets/usage_pod: .config include/applet_tables.h include/applets.h
quiet_cmd_gen_usage_compressed = GEN include/usage_compressed.h
cmd_gen_usage_compressed = $(srctree_slash)applets/usage_compressed include/usage_compressed.h applets
include/usage_compressed.h: applets/usage $(srctree_slash)applets/usage_compressed
$(call cmd,gen_usage_compressed)
quiet_cmd_gen_applet_tables = GEN include/applet_tables.h
cmd_gen_applet_tables = applets/applet_tables include/applet_tables.h include/NUM_APPLETS.h
include/applet_tables.h: applets/applet_tables
$(call cmd,gen_applet_tables)
-151
View File
@@ -1,151 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Applet table generator.
* Runs on host and produces include/applet_tables.h
*
* Copyright (C) 2007 Denys Vlasenko <vda.linux@googlemail.com>
*
* Licensed under GPLv2, see file License in this tarball for details.
*/
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include "../include/autoconf.h"
#include "../include/busybox.h"
struct bb_applet {
const char *name;
const char *main;
enum bb_install_loc_t install_loc;
enum bb_suid_t need_suid;
/* true if instead of fork(); exec("applet"); waitpid();
* one can do fork(); exit(applet_main(argc,argv)); waitpid(); */
unsigned char noexec;
/* Even nicer */
/* true if instead of fork(); exec("applet"); waitpid();
* one can simply call applet_main(argc,argv); */
unsigned char nofork;
};
/* Define struct bb_applet applets[] */
#include "../include/applets.h"
enum { NUM_APPLETS = ARRAY_SIZE(applets) };
static int offset[NUM_APPLETS];
static int cmp_name(const void *a, const void *b)
{
const struct bb_applet *aa = a;
const struct bb_applet *bb = b;
return strcmp(aa->name, bb->name);
}
int main(int argc, char **argv)
{
int i;
int ofs;
unsigned MAX_APPLET_NAME_LEN = 1;
qsort(applets, NUM_APPLETS, sizeof(applets[0]), cmp_name);
ofs = 0;
for (i = 0; i < NUM_APPLETS; i++) {
offset[i] = ofs;
ofs += strlen(applets[i].name) + 1;
}
/* We reuse 4 high-order bits of offset array for other purposes,
* so if they are indeed needed, refuse to proceed */
if (ofs > 0xfff)
return 1;
if (!argv[1])
return 1;
i = open(argv[1], O_WRONLY | O_TRUNC | O_CREAT, 0666);
if (i < 0)
return 1;
dup2(i, 1);
/* Keep in sync with include/busybox.h! */
printf("/* This is a generated file, don't edit */\n\n");
printf("#define NUM_APPLETS %u\n", NUM_APPLETS);
if (NUM_APPLETS == 1) {
printf("#define SINGLE_APPLET_STR \"%s\"\n", applets[0].name);
printf("#define SINGLE_APPLET_MAIN %s_main\n", applets[0].name);
}
printf("\n");
//printf("#ifndef SKIP_definitions\n");
printf("const char applet_names[] ALIGN1 = \"\"\n");
for (i = 0; i < NUM_APPLETS; i++) {
printf("\"%s\" \"\\0\"\n", applets[i].name);
if (MAX_APPLET_NAME_LEN < strlen(applets[i].name))
MAX_APPLET_NAME_LEN = strlen(applets[i].name);
}
printf(";\n\n");
printf("#ifndef SKIP_applet_main\n");
printf("int (*const applet_main[])(int argc, char **argv) = {\n");
for (i = 0; i < NUM_APPLETS; i++) {
printf("%s_main,\n", applets[i].main);
}
printf("};\n");
printf("#endif\n\n");
printf("const uint16_t applet_nameofs[] ALIGN2 = {\n");
for (i = 0; i < NUM_APPLETS; i++) {
printf("0x%04x,\n",
offset[i]
#if ENABLE_FEATURE_PREFER_APPLETS
+ (applets[i].nofork << 12)
+ (applets[i].noexec << 13)
#endif
#if ENABLE_FEATURE_SUID
+ (applets[i].need_suid << 14) /* 2 bits */
#endif
);
}
printf("};\n\n");
#if ENABLE_FEATURE_INSTALLER
printf("const uint8_t applet_install_loc[] ALIGN1 = {\n");
i = 0;
while (i < NUM_APPLETS) {
int v = applets[i].install_loc; /* 3 bits */
if (++i < NUM_APPLETS)
v |= applets[i].install_loc << 4; /* 3 bits */
printf("0x%02x,\n", v);
i++;
}
printf("};\n");
#endif
//printf("#endif /* SKIP_definitions */\n");
printf("\n");
printf("#define MAX_APPLET_NAME_LEN %u\n", MAX_APPLET_NAME_LEN);
if (argv[2]) {
char line_old[80];
char line_new[80];
FILE *fp;
line_old[0] = 0;
fp = fopen(argv[2], "r");
if (fp) {
fgets(line_old, sizeof(line_old), fp);
fclose(fp);
}
sprintf(line_new, "#define NUM_APPLETS %u\n", NUM_APPLETS);
if (strcmp(line_old, line_new) != 0) {
fp = fopen(argv[2], "w");
if (!fp)
return 1;
fputs(line_new, fp);
}
}
return 0;
}
-16
View File
@@ -1,16 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Stub for linking busybox binary against libbusybox.
*
* Copyright (C) 2007 Denys Vlasenko <vda.linux@googlemail.com>
*
* Licensed under GPLv2, see file License in this tarball for details.
*/
#include "busybox.h"
#if ENABLE_BUILD_LIBBUSYBOX
int main(int argc UNUSED_PARAM, char **argv)
{
return lbb_main(argv);
}
#endif
-24
View File
@@ -1,24 +0,0 @@
/* Minimal wrapper to build an individual busybox applet.
*
* Copyright 2005 Rob Landley <rob@landley.net
*
* Licensed under GPL version 2, see file LICENSE in this tarball for details
*/
const char *applet_name;
#include <stdio.h>
#include <stdlib.h>
#include "usage.h"
int main(int argc, char **argv)
{
applet_name = argv[0];
return APPLET_main(argc,argv);
}
void bb_show_usage(void)
{
fputs(APPLET_full_usage "\n", stdout);
exit(EXIT_FAILURE);
}
-110
View File
@@ -1,110 +0,0 @@
#!/bin/sh
export LC_ALL=POSIX
export LC_CTYPE=POSIX
prefix=${1}
if [ -z "$prefix" ]; then
echo "usage: applets/install.sh DESTINATION [--symlinks/--hardlinks/--scriptwrapper]"
exit 1;
fi
h=`sort busybox.links | uniq`
scriptwrapper="n"
cleanup="0"
noclobber="0"
case "$2" in
--hardlinks) linkopts="-f";;
--symlinks) linkopts="-fs";;
--scriptwrapper) scriptwrapper="y";swrapall="y";;
--sw-sh-hard) scriptwrapper="y";linkopts="-f";;
--sw-sh-sym) scriptwrapper="y";linkopts="-fs";;
--cleanup) cleanup="1";;
--noclobber) noclobber="1";;
"") h="";;
*) echo "Unknown install option: $2"; exit 1;;
esac
if [ -n "$DO_INSTALL_LIBS" ] && [ "$DO_INSTALL_LIBS" != "n" ]; then
# get the target dir for the libs
# assume it starts with lib
libdir=$($CC -print-file-name=libc.so | \
sed -n 's%^.*\(/lib[^\/]*\)/libc.so%\1%p')
if test -z "$libdir"; then
libdir=/lib
fi
mkdir -p $prefix/$libdir || exit 1
for i in $DO_INSTALL_LIBS; do
rm -f $prefix/$libdir/$i || exit 1
if [ -f $i ]; then
cp -pPR $i $prefix/$libdir/ || exit 1
chmod 0644 $prefix/$libdir/$i || exit 1
fi
done
fi
if [ "$cleanup" = "1" ] && [ -e "$prefix/bin/busybox" ]; then
inode=`ls -i "$prefix/bin/busybox" | awk '{print $1}'`
sub_shell_it=`
cd "$prefix"
for d in usr/sbin usr/bin sbin bin; do
pd=$PWD
if [ -d "$d" ]; then
cd $d
ls -iL . | grep "^ *$inode" | awk '{print $2}' | env -i xargs rm -f
fi
cd "$pd"
done
`
exit 0
fi
rm -f $prefix/bin/busybox || exit 1
mkdir -p $prefix/bin || exit 1
install -m 755 busybox $prefix/bin/busybox || exit 1
for i in $h; do
appdir=`dirname $i`
mkdir -p $prefix/$appdir || exit 1
if [ "$scriptwrapper" = "y" ]; then
if [ "$swrapall" != "y" ] && [ "$i" = "/bin/sh" ]; then
ln $linkopts busybox $prefix$i || exit 1
else
rm -f $prefix$i
echo "#!/bin/busybox" > $prefix$i
chmod +x $prefix/$i
fi
echo " $prefix$i"
else
if [ "$2" = "--hardlinks" ]; then
bb_path="$prefix/bin/busybox"
else
case "$appdir" in
/)
bb_path="bin/busybox"
;;
/bin)
bb_path="busybox"
;;
/sbin)
bb_path="../bin/busybox"
;;
/usr/bin|/usr/sbin)
bb_path="../../bin/busybox"
;;
*)
echo "Unknown installation directory: $appdir"
exit 1
;;
esac
fi
if [ "$noclobber" = "0" ] || [ ! -e "$prefix$i" ]; then
echo " $prefix$i -> $bb_path"
ln $linkopts $bb_path $prefix$i || exit 1
else
echo " $prefix$i already exists"
fi
fi
done
exit 0
-55
View File
@@ -1,55 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Copyright (C) 2008 Denys Vlasenko.
*
* Licensed under GPLv2, see file LICENSE in this tarball for details.
*/
#include <unistd.h>
#include <stdlib.h>
#include <string.h>
#include "autoconf.h"
/* Since we can't use platform.h, have to do this again by hand: */
#if ENABLE_NOMMU
# define BB_MMU 0
# define USE_FOR_NOMMU(...) __VA_ARGS__
# define USE_FOR_MMU(...)
#else
# define BB_MMU 1
# define USE_FOR_NOMMU(...)
# define USE_FOR_MMU(...) __VA_ARGS__
#endif
#include "usage.h"
#define MAKE_USAGE(aname, usage) { aname, usage },
static struct usage_data {
const char *aname;
const char *usage;
} usage_array[] = {
#include "applets.h"
};
static int compare_func(const void *a, const void *b)
{
const struct usage_data *ua = a;
const struct usage_data *ub = b;
return strcmp(ua->aname, ub->aname);
}
int main(void)
{
int i;
int num_messages = sizeof(usage_array) / sizeof(usage_array[0]);
if (num_messages == 0)
return 0;
qsort(usage_array,
num_messages, sizeof(usage_array[0]),
compare_func);
for (i = 0; i < num_messages; i++)
write(STDOUT_FILENO, usage_array[i].usage, strlen(usage_array[i].usage) + 1);
return 0;
}
-43
View File
@@ -1,43 +0,0 @@
#!/bin/sh
target="$1"
loc="$2"
test "$target" || exit 1
test "$loc" || loc=.
test -x "$loc/usage" || exit 1
test "$SED" || SED=sed
test "$DD" || DD=dd
exec >"$target.$$"
echo '#define UNPACKED_USAGE "" \'
"$loc/usage" | od -v -t x1 \
| $SED -e 's/^[^ ]*//' \
-e 's/ //g' \
-e '/^$/d' \
-e 's/\(..\)/\\x\1/g' \
-e 's/^/"/' \
-e 's/$/" \\/'
echo ''
echo '#define PACKED_USAGE \'
## Breaks on big-endian systems!
## # Extra effort to avoid using "od -t x1": -t is not available
## # in non-CONFIG_DESKTOPed busybox od
##
## "$loc/usage" | bzip2 -1 | od -v -x \
## | $SED -e 's/^[^ ]*//' \
## -e 's/ //g' \
## -e '/^$/d' \
## -e 's/\(..\)\(..\)/0x\2,0x\1,/g'
## -e 's/$/ \\/'
"$loc/usage" | bzip2 -1 | $DD bs=2 skip=1 2>/dev/null | od -v -t x1 \
| $SED -e 's/^[^ ]*//' \
-e 's/ //g' \
-e '/^$/d' \
-e 's/\(..\)/0x\1,/g' \
-e 's/$/ \\/'
echo ''
mv -- "$target.$$" "$target"
-111
View File
@@ -1,111 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Copyright (C) 2009 Denys Vlasenko.
*
* Licensed under GPLv2, see file LICENSE in this tarball for details.
*/
#include <unistd.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <stdio.h>
#include "autoconf.h"
#define SKIP_applet_main
#define ALIGN1 /* nothing, just to placate applet_tables.h */
#define ALIGN2 /* nothing, just to placate applet_tables.h */
#include "applet_tables.h"
/* Since we can't use platform.h, have to do this again by hand: */
#if ENABLE_NOMMU
# define BB_MMU 0
# define USE_FOR_NOMMU(...) __VA_ARGS__
# define USE_FOR_MMU(...)
#else
# define BB_MMU 1
# define USE_FOR_NOMMU(...)
# define USE_FOR_MMU(...) __VA_ARGS__
#endif
#include "usage.h"
#define MAKE_USAGE(aname, usage) { aname, usage },
static struct usage_data {
const char *aname;
const char *usage;
} usage_array[] = {
#include "applets.h"
};
static int compare_func(const void *a, const void *b)
{
const struct usage_data *ua = a;
const struct usage_data *ub = b;
return strcmp(ua->aname, ub->aname);
}
int main(void)
{
int col, len2;
int i;
int num_messages = sizeof(usage_array) / sizeof(usage_array[0]);
if (num_messages == 0)
return 0;
qsort(usage_array,
num_messages, sizeof(usage_array[0]),
compare_func);
col = 0;
for (i = 0; i < num_messages; i++) {
len2 = strlen(usage_array[i].aname) + 2;
if (col >= 76 - len2) {
printf(",\n");
col = 0;
}
if (col == 0) {
col = 6;
printf("\t");
} else {
printf(", ");
}
printf(usage_array[i].aname);
col += len2;
}
printf("\n\n");
printf("=head1 COMMAND DESCRIPTIONS\n\n");
printf("=over 4\n\n");
for (i = 0; i < num_messages; i++) {
if (usage_array[i].aname[0] >= 'a' && usage_array[i].aname[0] <= 'z'
&& usage_array[i].usage[0] != NOUSAGE_STR[0]
) {
printf("=item B<%s>\n\n", usage_array[i].aname);
if (usage_array[i].usage[0])
printf("%s %s\n\n", usage_array[i].aname, usage_array[i].usage);
else
printf("%s\n\n", usage_array[i].aname);
}
}
return 0;
}
/* TODO: we used to make options bold with B<> and output an example too:
=item B<cat>
cat [B<-u>] [FILE]...
Concatenate FILE(s) and print them to stdout
Options:
-u Use unbuffered i/o (ignored)
Example:
$ cat /proc/uptime
110716.72 17.67
*/
-7
View File
@@ -1,7 +0,0 @@
# ==========================================================================
# Build system
# ==========================================================================
# -mpreferred-stack-boundary=2 is essential in preventing gcc 4.2.x
# from aligning stack to 16 bytes. (Which is gcc's way of supporting SSE).
CFLAGS += $(call cc-option,-march=i386 -mpreferred-stack-boundary=2,)
-379
View File
@@ -1,379 +0,0 @@
#
# For a description of the syntax of this configuration file,
# see scripts/kbuild/config-language.txt.
#
menu "Archival Utilities"
INSERT
config FEATURE_SEAMLESS_XZ
bool "Make tar, rpm, modprobe etc understand .xz data"
default y
help
Make tar, rpm, modprobe etc understand .xz data.
config FEATURE_SEAMLESS_LZMA
bool "Make tar, rpm, modprobe etc understand .lzma data"
default y
help
Make tar, rpm, modprobe etc understand .lzma data.
config FEATURE_SEAMLESS_BZ2
bool "Make tar, rpm, modprobe etc understand .bz2 data"
default y
help
Make tar, rpm, modprobe etc understand .bz2 data.
config FEATURE_SEAMLESS_GZ
bool "Make tar, rpm, modprobe etc understand .gz data"
default y
help
Make tar, rpm, modprobe etc understand .gz data.
config FEATURE_SEAMLESS_Z
bool "Make tar and gunzip understand .Z data"
default n
help
Make tar and gunzip understand .Z data.
config AR
bool "ar"
default n # needs to be improved to be able to replace binutils ar
help
ar is an archival utility program used to create, modify, and
extract contents from archives. An archive is a single file holding
a collection of other files in a structure that makes it possible to
retrieve the original individual files (called archive members).
The original files' contents, mode (permissions), timestamp, owner,
and group are preserved in the archive, and can be restored on
extraction.
The stored filename is limited to 15 characters. (for more information
see long filename support).
ar has 60 bytes of overheads for every stored file.
This implementation of ar can extract archives, it cannot create or
modify them.
On an x86 system, the ar applet adds about 1K.
Unless you have a specific application which requires ar, you should
probably say N here.
config FEATURE_AR_LONG_FILENAMES
bool "Support for long filenames (not needed for debs)"
default y
depends on AR
help
By default the ar format can only store the first 15 characters
of the filename, this option removes that limitation.
It supports the GNU ar long filename method which moves multiple long
filenames into a the data section of a new ar entry.
config FEATURE_AR_CREATE
bool "Support archive creation"
default y
depends on AR
help
This enables archive creation (-c and -r) with busybox ar.
config BUNZIP2
bool "bunzip2"
default y
help
bunzip2 is a compression utility using the Burrows-Wheeler block
sorting text compression algorithm, and Huffman coding. Compression
is generally considerably better than that achieved by more
conventional LZ77/LZ78-based compressors, and approaches the
performance of the PPM family of statistical compressors.
Unless you have a specific application which requires bunzip2, you
should probably say N here.
config BZIP2
bool "bzip2"
default y
help
bzip2 is a compression utility using the Burrows-Wheeler block
sorting text compression algorithm, and Huffman coding. Compression
is generally considerably better than that achieved by more
conventional LZ77/LZ78-based compressors, and approaches the
performance of the PPM family of statistical compressors.
Unless you have a specific application which requires bzip2, you
should probably say N here.
config CPIO
bool "cpio"
default y
help
cpio is an archival utility program used to create, modify, and
extract contents from archives.
cpio has 110 bytes of overheads for every stored file.
This implementation of cpio can extract cpio archives created in the
"newc" or "crc" format, it cannot create or modify them.
Unless you have a specific application which requires cpio, you
should probably say N here.
config FEATURE_CPIO_O
bool "Support for archive creation"
default y
depends on CPIO
help
This implementation of cpio can create cpio archives in the "newc"
format only.
config FEATURE_CPIO_P
bool "Support for passthrough mode"
default y
depends on FEATURE_CPIO_O
help
Passthrough mode. Rarely used.
config DPKG
bool "dpkg"
default n
select FEATURE_SEAMLESS_GZ
help
dpkg is a medium-level tool to install, build, remove and manage
Debian packages.
This implementation of dpkg has a number of limitations,
you should use the official dpkg if possible.
config DPKG_DEB
bool "dpkg_deb"
default n
select FEATURE_SEAMLESS_GZ
help
dpkg-deb unpacks and provides information about Debian archives.
This implementation of dpkg-deb cannot pack archives.
Unless you have a specific application which requires dpkg-deb,
say N here.
config FEATURE_DPKG_DEB_EXTRACT_ONLY
bool "Extract only (-x)"
default n
depends on DPKG_DEB
help
This reduces dpkg-deb to the equivalent of
"ar -p <deb> data.tar.gz | tar -zx". However it saves space as none
of the extra dpkg-deb, ar or tar options are needed, they are linked
to internally.
config GUNZIP
bool "gunzip"
default y
help
gunzip is used to decompress archives created by gzip.
You can use the `-t' option to test the integrity of
an archive, without decompressing it.
config GZIP
bool "gzip"
default y
help
gzip is used to compress files.
It's probably the most widely used UNIX compression program.
config FEATURE_GZIP_LONG_OPTIONS
bool "Enable long options"
default y
depends on GZIP && LONG_OPTS
help
Enable use of long options, increases size by about 106 Bytes
config LZOP
bool "lzop"
default y
help
Lzop compression/decompresion.
config LZOP_COMPR_HIGH
bool "lzop complession levels 7,8,9 (not very useful)"
default n
depends on LZOP
help
High levels (7,8,9) of lzop compression. These levels
are actually slower than gzip at equivalent compression ratios
and take up 3.2K of code.
config RPM2CPIO
bool "rpm2cpio"
default y
help
Converts an RPM file into a CPIO archive.
config RPM
bool "rpm"
default y
help
Mini RPM applet - queries and extracts RPM packages.
config TAR
bool "tar"
default y
help
tar is an archiving program. It's commonly used with gzip to
create compressed archives. It's probably the most widely used
UNIX archive program.
config FEATURE_TAR_CREATE
bool "Enable archive creation"
default y
depends on TAR
help
If you enable this option you'll be able to create
tar archives using the `-c' option.
config FEATURE_TAR_AUTODETECT
bool "Autodetect compressed tarballs"
default y
depends on TAR && (FEATURE_SEAMLESS_Z || FEATURE_SEAMLESS_GZ || FEATURE_SEAMLESS_BZ2 || FEATURE_SEAMLESS_LZMA || FEATURE_SEAMLESS_XZ)
help
With this option tar can automatically detect compressed
tarballs. Currently it works only on files (not pipes etc).
config FEATURE_TAR_FROM
bool "Enable -X (exclude from) and -T (include from) options)"
default y
depends on TAR
help
If you enable this option you'll be able to specify
a list of files to include or exclude from an archive.
config FEATURE_TAR_OLDGNU_COMPATIBILITY
bool "Support for old tar header format"
default y
depends on TAR || DPKG
help
This option is required to unpack archives created in
the old GNU format; help to kill this old format by
repacking your ancient archives with the new format.
config FEATURE_TAR_OLDSUN_COMPATIBILITY
bool "Enable untarring of tarballs with checksums produced by buggy Sun tar"
default y
depends on TAR || DPKG
help
This option is required to unpack archives created by some old
version of Sun's tar (it was calculating checksum using signed
arithmetic). It is said to be fixed in newer Sun tar, but "old"
tarballs still exist.
config FEATURE_TAR_GNU_EXTENSIONS
bool "Support for GNU tar extensions (long filenames)"
default y
depends on TAR || DPKG
help
With this option busybox supports GNU long filenames and
linknames.
config FEATURE_TAR_LONG_OPTIONS
bool "Enable long options"
default y
depends on TAR && LONG_OPTS
help
Enable use of long options, increases size by about 400 Bytes
config FEATURE_TAR_TO_COMMAND
bool "Support for writing to an external program"
default y
depends on TAR && FEATURE_TAR_LONG_OPTIONS
help
If you enable this option you'll be able to instruct tar to send
the contents of each extracted file to the standard input of an
external program.
config FEATURE_TAR_UNAME_GNAME
bool "Enable use of user and group names"
default y
depends on TAR
help
Enables use of user and group names in tar. This affects contents
listings (-t) and preserving permissions when unpacking (-p).
+200 bytes.
config FEATURE_TAR_NOPRESERVE_TIME
bool "Enable -m (do not preserve time) option"
default y
depends on TAR
help
With this option busybox supports GNU tar -m
(do not preserve time) option.
config FEATURE_TAR_SELINUX
bool "Support for extracting SELinux labels"
default n
depends on TAR && SELINUX
help
With this option busybox supports restoring SELinux labels
when extracting files from tar archives.
config UNCOMPRESS
bool "uncompress"
default n
help
uncompress is used to decompress archives created by compress.
Not much used anymore, replaced by gzip/gunzip.
config UNLZMA
bool "unlzma"
default y
help
unlzma is a compression utility using the Lempel-Ziv-Markov chain
compression algorithm, and range coding. Compression
is generally considerably better than that achieved by the bzip2
compressors.
The BusyBox unlzma applet is limited to de-compression only.
On an x86 system, this applet adds about 4K.
Unless you have a specific application which requires unlzma, you
should probably say N here.
config FEATURE_LZMA_FAST
bool "Optimize unlzma for speed"
default y
depends on UNLZMA
help
This option reduces decompression time by about 25% at the cost of
a 1K bigger binary.
config LZMA
bool "Provide lzma alias which supports only unpacking"
default y
depends on UNLZMA
help
Enable this option if you want commands like "lzma -d" to work.
IOW: you'll get lzma applet, but it will always require -d option.
config UNXZ
bool "unxz"
default y
help
unxz is a unlzma successor.
config XZ
bool "Provide xz alias which supports only unpacking"
default y
depends on UNXZ
help
Enable this option if you want commands like "xz -d" to work.
IOW: you'll get xz applet, but it will always require -d option.
config UNZIP
bool "unzip"
default y
help
unzip will list or extract files from a ZIP archive,
commonly found on DOS/WIN systems. The default behavior
(with no options) is to extract the archive into the
current directory. Use the `-d' option to extract to a
directory of your choice.
endmenu
-31
View File
@@ -1,31 +0,0 @@
# Makefile for busybox
#
# Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
#
# Licensed under the GPL v2, see the file LICENSE in this tarball.
libs-y += libunarchive/
lib-y:=
INSERT
lib-$(CONFIG_AR) += ar.o
lib-$(CONFIG_CPIO) += cpio.o
lib-$(CONFIG_DPKG) += dpkg.o
lib-$(CONFIG_DPKG_DEB) += dpkg_deb.o
lib-$(CONFIG_RPM2CPIO) += rpm2cpio.o
lib-$(CONFIG_RPM) += rpm.o
lib-$(CONFIG_TAR) += tar.o
lib-$(CONFIG_UNZIP) += unzip.o
lib-$(CONFIG_LZOP) += lzop.o lzo1x_1.o lzo1x_1o.o lzo1x_d.o bbunzip.o
lib-$(CONFIG_LZOP_COMPR_HIGH) += lzo1x_9x.o
lib-$(CONFIG_GZIP) += gzip.o bbunzip.o
lib-$(CONFIG_BZIP2) += bzip2.o bbunzip.o
lib-$(CONFIG_UNXZ) += bbunzip.o
lib-$(CONFIG_UNLZMA) += bbunzip.o
lib-$(CONFIG_BUNZIP2) += bbunzip.o
lib-$(CONFIG_GUNZIP) += bbunzip.o
lib-$(CONFIG_UNCOMPRESS) += bbunzip.o
-252
View File
@@ -1,252 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Mini ar implementation for busybox
*
* Copyright (C) 2000 by Glenn McGrath
*
* Based in part on BusyBox tar, Debian dpkg-deb and GNU ar.
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*
* Archive creation support:
* Copyright (C) 2010 Nokia Corporation. All rights reserved.
* Written by Alexander Shishkin.
*
* There is no single standard to adhere to so ar may not portable
* between different systems
* http://www.unix-systems.org/single_unix_specification_v2/xcu/ar.html
*/
#include "libbb.h"
#include "unarchive.h"
#include "ar.h"
#if ENABLE_FEATURE_AR_CREATE
/* filter out entries with same names as specified on the command line */
static char FAST_FUNC filter_replaceable(archive_handle_t *handle)
{
if (find_list_entry(handle->accept, handle->file_header->name))
return EXIT_FAILURE;
return EXIT_SUCCESS;
}
static void output_ar_header(archive_handle_t *handle)
{
/* GNU ar 2.19.51.0.14 creates malformed archives
* if input files are >10G. It also truncates files >4GB
* (uses "size mod 4G"). We abort in this case:
* We could add support for up to 10G files, but this is unlikely to be useful.
* Note that unpacking side limits all fields to "unsigned int" data type,
* and treats "all ones" as an error indicator. Thus max we allow here is UINT_MAX-1.
*/
enum {
/* for 2nd field: mtime */
MAX11CHARS = UINT_MAX > 0xffffffff ? (unsigned)99999999999 : UINT_MAX-1,
/* for last field: filesize */
MAX10CHARS = UINT_MAX > 0xffffffff ? (unsigned)9999999999 : UINT_MAX-1,
};
struct file_header_t *fh = handle->file_header;
if (handle->offset & 1) {
xwrite(handle->src_fd, "\n", 1);
handle->offset++;
}
/* Careful! The widths should be exact. Fields must be separated */
if (sizeof(off_t) > 4 && fh->size > (off_t)MAX10CHARS) {
bb_error_msg_and_die("'%s' is bigger than ar can handle", fh->name);
}
fdprintf(handle->src_fd, "%-16.16s%-12lu%-6u%-6u%-8o%-10"OFF_FMT"u`\n",
fh->name,
(sizeof(time_t) > 4 && fh->mtime > MAX11CHARS) ? (long)0 : (long)fh->mtime,
fh->uid > 99999 ? 0 : (int)fh->uid,
fh->gid > 99999 ? 0 : (int)fh->gid,
(int)fh->mode & 07777777,
fh->size
);
handle->offset += AR_HEADER_LEN;
}
/*
* when replacing files in an existing archive, copy from the the
* original archive those files that are to be left intact
*/
static void FAST_FUNC copy_data(archive_handle_t *handle)
{
archive_handle_t *out_handle = handle->ar__out;
struct file_header_t *fh = handle->file_header;
out_handle->file_header = fh;
output_ar_header(out_handle);
bb_copyfd_exact_size(handle->src_fd, out_handle->src_fd, fh->size);
out_handle->offset += fh->size;
}
static int write_ar_header(archive_handle_t *handle)
{
char *fn;
char fn_h[17]; /* 15 + "/" + NUL */
struct stat st;
int fd;
fn = llist_pop(&handle->accept);
if (!fn)
return -1;
xstat(fn, &st);
handle->file_header->mtime = st.st_mtime;
handle->file_header->uid = st.st_uid;
handle->file_header->gid = st.st_gid;
handle->file_header->mode = st.st_mode;
handle->file_header->size = st.st_size;
handle->file_header->name = fn_h;
//TODO: if ENABLE_FEATURE_AR_LONG_FILENAMES...
sprintf(fn_h, "%.15s/", bb_basename(fn));
output_ar_header(handle);
fd = xopen(fn, O_RDONLY);
bb_copyfd_exact_size(fd, handle->src_fd, st.st_size);
close(fd);
handle->offset += st.st_size;
return 0;
}
static int write_ar_archive(archive_handle_t *handle)
{
struct stat st;
archive_handle_t *out_handle;
if (fstat(handle->src_fd, &st) == -1)
bb_simple_perror_msg_and_die(handle->ar__name);
/* if archive exists, create a new handle for output.
* we create it in place of the old one.
*/
if (st.st_size != 0) {
out_handle = init_handle();
xunlink(handle->ar__name);
out_handle->src_fd = xopen(handle->ar__name, O_WRONLY | O_CREAT | O_TRUNC);
out_handle->accept = handle->accept;
} else {
out_handle = handle;
}
handle->ar__out = out_handle;
xwrite(out_handle->src_fd, AR_MAGIC "\n", AR_MAGIC_LEN + 1);
out_handle->offset += AR_MAGIC_LEN + 1;
/* skip to the end of the archive if we have to append stuff */
if (st.st_size != 0) {
handle->filter = filter_replaceable;
handle->action_data = copy_data;
unpack_ar_archive(handle);
}
while (write_ar_header(out_handle) == 0)
continue;
/* optional, since we exit right after we return */
if (ENABLE_FEATURE_CLEAN_UP) {
close(handle->src_fd);
if (out_handle->src_fd != handle->src_fd)
close(out_handle->src_fd);
}
return EXIT_SUCCESS;
}
#endif /* FEATURE_AR_CREATE */
static void FAST_FUNC header_verbose_list_ar(const file_header_t *file_header)
{
const char *mode = bb_mode_string(file_header->mode);
char *mtime;
mtime = ctime(&file_header->mtime);
mtime[16] = ' ';
memmove(&mtime[17], &mtime[20], 4);
mtime[21] = '\0';
printf("%s %u/%u%7"OFF_FMT"u %s %s\n", &mode[1],
(int)file_header->uid, (int)file_header->gid,
file_header->size,
&mtime[4], file_header->name
);
}
#define AR_OPT_VERBOSE (1 << 0)
#define AR_OPT_PRESERVE_DATE (1 << 1)
/* "ar r" implies create, but warns about it. c suppresses warning.
* bbox accepts but ignores it: */
#define AR_OPT_CREATE (1 << 2)
#define AR_CMD_PRINT (1 << 3)
#define FIRST_CMD AR_CMD_PRINT
#define AR_CMD_LIST (1 << 4)
#define AR_CMD_EXTRACT (1 << 5)
#define AR_CMD_INSERT (1 << 6)
int ar_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int ar_main(int argc UNUSED_PARAM, char **argv)
{
archive_handle_t *archive_handle;
unsigned opt, t;
archive_handle = init_handle();
/* --: prepend '-' to the first argument if required */
/* -1: at least one param is reqd */
/* one of p,t,x[,r] is required */
opt_complementary = "--:-1:p:t:x"IF_FEATURE_AR_CREATE(":r");
opt = getopt32(argv, "voc""ptx"IF_FEATURE_AR_CREATE("r"));
argv += optind;
t = opt / FIRST_CMD;
if (t & (t-1)) /* more than one of p,t,x[,r] are specified */
bb_show_usage();
if (opt & AR_CMD_PRINT) {
archive_handle->action_data = data_extract_to_stdout;
}
if (opt & AR_CMD_LIST) {
archive_handle->action_header = header_list;
}
if (opt & AR_CMD_EXTRACT) {
archive_handle->action_data = data_extract_all;
}
if (opt & AR_OPT_PRESERVE_DATE) {
archive_handle->ah_flags |= ARCHIVE_RESTORE_DATE;
}
if (opt & AR_OPT_VERBOSE) {
archive_handle->action_header = header_verbose_list_ar;
}
#if ENABLE_FEATURE_AR_CREATE
archive_handle->ar__name = *argv;
#endif
archive_handle->src_fd = xopen(*argv++,
(opt & AR_CMD_INSERT)
? O_RDWR | O_CREAT
: O_RDONLY
);
if (*argv)
archive_handle->filter = filter_accept_list;
while (*argv) {
llist_add_to_end(&archive_handle->accept, *argv++);
}
#if ENABLE_FEATURE_AR_CREATE
if (opt & AR_CMD_INSERT)
return write_ar_archive(archive_handle);
#endif
unpack_ar_archive(archive_handle);
return EXIT_SUCCESS;
}
-403
View File
@@ -1,403 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Common code for gunzip-like applets
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
enum {
OPT_STDOUT = 1 << 0,
OPT_FORCE = 1 << 1,
/* only some decompressors: */
OPT_VERBOSE = 1 << 2,
OPT_DECOMPRESS = 1 << 3,
OPT_TEST = 1 << 4,
};
static
int open_to_or_warn(int to_fd, const char *filename, int flags, int mode)
{
int fd = open3_or_warn(filename, flags, mode);
if (fd < 0) {
return 1;
}
xmove_fd(fd, to_fd);
return 0;
}
char* FAST_FUNC append_ext(char *filename, const char *expected_ext)
{
return xasprintf("%s.%s", filename, expected_ext);
}
int FAST_FUNC bbunpack(char **argv,
IF_DESKTOP(long long) int FAST_FUNC (*unpacker)(unpack_info_t *info),
char* FAST_FUNC (*make_new_name)(char *filename, const char *expected_ext),
const char *expected_ext
)
{
struct stat stat_buf;
IF_DESKTOP(long long) int status;
char *filename, *new_name;
smallint exitcode = 0;
unpack_info_t info;
do {
/* NB: new_name is *maybe* malloc'ed! */
new_name = NULL;
filename = *argv; /* can be NULL - 'streaming' bunzip2 */
if (filename && LONE_DASH(filename))
filename = NULL;
/* Open src */
if (filename) {
if (stat(filename, &stat_buf) != 0) {
bb_simple_perror_msg(filename);
err:
exitcode = 1;
goto free_name;
}
if (open_to_or_warn(STDIN_FILENO, filename, O_RDONLY, 0))
goto err;
}
/* Special cases: test, stdout */
if (option_mask32 & (OPT_STDOUT|OPT_TEST)) {
if (option_mask32 & OPT_TEST)
if (open_to_or_warn(STDOUT_FILENO, bb_dev_null, O_WRONLY, 0))
goto err;
filename = NULL;
}
/* Open dst if we are going to unpack to file */
if (filename) {
new_name = make_new_name(filename, expected_ext);
if (!new_name) {
bb_error_msg("%s: unknown suffix - ignored", filename);
goto err;
}
/* -f: overwrite existing output files */
if (option_mask32 & OPT_FORCE) {
unlink(new_name);
}
/* O_EXCL: "real" bunzip2 doesn't overwrite files */
/* GNU gunzip does not bail out, but goes to next file */
if (open_to_or_warn(STDOUT_FILENO, new_name, O_WRONLY | O_CREAT | O_EXCL,
stat_buf.st_mode))
goto err;
}
/* Check that the input is sane */
if (isatty(STDIN_FILENO) && (option_mask32 & OPT_FORCE) == 0) {
bb_error_msg_and_die("compressed data not read from terminal, "
"use -f to force it");
}
/* memset(&info, 0, sizeof(info)); */
info.mtime = 0; /* so far it has one member only */
status = unpacker(&info);
if (status < 0)
exitcode = 1;
xclose(STDOUT_FILENO); /* with error check! */
if (filename) {
char *del = new_name;
if (status >= 0) {
/* TODO: restore other things? */
if (info.mtime) {
struct timeval times[2];
times[1].tv_sec = times[0].tv_sec = info.mtime;
times[1].tv_usec = times[0].tv_usec = 0;
/* Note: we closed it first.
* On some systems calling utimes
* then closing resets the mtime
* back to current time. */
utimes(new_name, times); /* ignoring errors */
}
/* Delete _compressed_ file */
del = filename;
/* restore extension (unless tgz -> tar case) */
if (new_name == filename)
filename[strlen(filename)] = '.';
}
xunlink(del);
#if 0 /* Currently buggy - wrong name: "a.gz: 261% - replaced with a.gz" */
/* Extreme bloat for gunzip compat */
if (ENABLE_DESKTOP && (option_mask32 & OPT_VERBOSE) && status >= 0) {
fprintf(stderr, "%s: %u%% - replaced with %s\n",
filename, (unsigned)(stat_buf.st_size*100 / (status+1)), new_name);
}
#endif
free_name:
if (new_name != filename)
free(new_name);
}
} while (*argv && *++argv);
return exitcode;
}
#if ENABLE_UNCOMPRESS || ENABLE_BUNZIP2 || ENABLE_UNLZMA || ENABLE_UNXZ
static
char* FAST_FUNC make_new_name_generic(char *filename, const char *expected_ext)
{
char *extension = strrchr(filename, '.');
if (!extension || strcmp(extension + 1, expected_ext) != 0) {
/* Mimic GNU gunzip - "real" bunzip2 tries to */
/* unpack file anyway, to file.out */
return NULL;
}
*extension = '\0';
return filename;
}
#endif
/*
* Uncompress applet for busybox (c) 2002 Glenn McGrath
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#if ENABLE_UNCOMPRESS
static
IF_DESKTOP(long long) int FAST_FUNC unpack_uncompress(unpack_info_t *info UNUSED_PARAM)
{
IF_DESKTOP(long long) int status = -1;
if ((xread_char(STDIN_FILENO) != 0x1f) || (xread_char(STDIN_FILENO) != 0x9d)) {
bb_error_msg("invalid magic");
} else {
status = unpack_Z_stream(STDIN_FILENO, STDOUT_FILENO);
}
return status;
}
int uncompress_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int uncompress_main(int argc UNUSED_PARAM, char **argv)
{
getopt32(argv, "cf");
argv += optind;
return bbunpack(argv, unpack_uncompress, make_new_name_generic, "Z");
}
#endif
/*
* Gzip implementation for busybox
*
* Based on GNU gzip v1.2.4 Copyright (C) 1992-1993 Jean-loup Gailly.
*
* Originally adjusted for busybox by Sven Rudolph <sr1@inf.tu-dresden.de>
* based on gzip sources
*
* Adjusted further by Erik Andersen <andersen@codepoet.org> to support files as
* well as stdin/stdout, and to generally behave itself wrt command line
* handling.
*
* General cleanup to better adhere to the style guide and make use of standard
* busybox functions by Glenn McGrath
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*
* gzip (GNU zip) -- compress files with zip algorithm and 'compress' interface
* Copyright (C) 1992-1993 Jean-loup Gailly
* The unzip code was written and put in the public domain by Mark Adler.
* Portions of the lzw code are derived from the public domain 'compress'
* written by Spencer Thomas, Joe Orost, James Woods, Jim McKie, Steve Davies,
* Ken Turkowski, Dave Mack and Peter Jannesen.
*
* See the license_msg below and the file COPYING for the software license.
* See the file algorithm.doc for the compression algorithms and file formats.
*/
#if ENABLE_GUNZIP
static
char* FAST_FUNC make_new_name_gunzip(char *filename, const char *expected_ext UNUSED_PARAM)
{
char *extension = strrchr(filename, '.');
if (!extension)
return NULL;
extension++;
if (strcmp(extension, "tgz" + 1) == 0
#if ENABLE_FEATURE_SEAMLESS_Z
|| (extension[0] == 'Z' && extension[1] == '\0')
#endif
) {
extension[-1] = '\0';
} else if (strcmp(extension, "tgz") == 0) {
filename = xstrdup(filename);
extension = strrchr(filename, '.');
extension[2] = 'a';
extension[3] = 'r';
} else {
return NULL;
}
return filename;
}
static
IF_DESKTOP(long long) int FAST_FUNC unpack_gunzip(unpack_info_t *info)
{
IF_DESKTOP(long long) int status = -1;
/* do the decompression, and cleanup */
if (xread_char(STDIN_FILENO) == 0x1f) {
unsigned char magic2;
magic2 = xread_char(STDIN_FILENO);
if (ENABLE_FEATURE_SEAMLESS_Z && magic2 == 0x9d) {
status = unpack_Z_stream(STDIN_FILENO, STDOUT_FILENO);
} else if (magic2 == 0x8b) {
status = unpack_gz_stream_with_info(STDIN_FILENO, STDOUT_FILENO, info);
} else {
goto bad_magic;
}
if (status < 0) {
bb_error_msg("error inflating");
}
} else {
bad_magic:
bb_error_msg("invalid magic");
/* status is still == -1 */
}
return status;
}
/*
* Linux kernel build uses gzip -d -n. We accept and ignore it.
* Man page says:
* -n --no-name
* gzip: do not save the original file name and time stamp.
* (The original name is always saved if the name had to be truncated.)
* gunzip: do not restore the original file name/time even if present
* (remove only the gzip suffix from the compressed file name).
* This option is the default when decompressing.
* -N --name
* gzip: always save the original file name and time stamp (this is the default)
* gunzip: restore the original file name and time stamp if present.
*/
int gunzip_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int gunzip_main(int argc UNUSED_PARAM, char **argv)
{
getopt32(argv, "cfvdtn");
argv += optind;
/* if called as zcat */
if (applet_name[1] == 'c')
option_mask32 |= OPT_STDOUT;
return bbunpack(argv, unpack_gunzip, make_new_name_gunzip, /*unused:*/ NULL);
}
#endif
/*
* Modified for busybox by Glenn McGrath
* Added support output to stdout by Thomas Lundquist <thomasez@zelow.no>
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
//usage:#define bunzip2_trivial_usage
//usage: "[OPTIONS] [FILE]..."
//usage:#define bunzip2_full_usage "\n\n"
//usage: "Decompress FILEs (or stdin)\n"
//usage: "\nOptions:"
//usage: "\n -c Write to stdout"
//usage: "\n -f Force"
//usage:#define bzcat_trivial_usage
//usage: "FILE"
//usage:#define bzcat_full_usage "\n\n"
//usage: "Decompress to stdout"
//applet:IF_BUNZIP2(APPLET(bunzip2, _BB_DIR_USR_BIN, _BB_SUID_DROP))
//applet:IF_BUNZIP2(APPLET_ODDNAME(bzcat, bunzip2, _BB_DIR_USR_BIN, _BB_SUID_DROP, bzcat))
#if ENABLE_BUNZIP2
static
IF_DESKTOP(long long) int FAST_FUNC unpack_bunzip2(unpack_info_t *info UNUSED_PARAM)
{
return unpack_bz2_stream_prime(STDIN_FILENO, STDOUT_FILENO);
}
int bunzip2_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int bunzip2_main(int argc UNUSED_PARAM, char **argv)
{
getopt32(argv, "cfvdt");
argv += optind;
if (applet_name[2] == 'c') /* bzcat */
option_mask32 |= OPT_STDOUT;
return bbunpack(argv, unpack_bunzip2, make_new_name_generic, "bz2");
}
#endif
/*
* Small lzma deflate implementation.
* Copyright (C) 2006 Aurelien Jacobs <aurel@gnuage.org>
*
* Based on bunzip.c from busybox
*
* Licensed under GPL v2, see file LICENSE in this tarball for details.
*/
#if ENABLE_UNLZMA
static
IF_DESKTOP(long long) int FAST_FUNC unpack_unlzma(unpack_info_t *info UNUSED_PARAM)
{
return unpack_lzma_stream(STDIN_FILENO, STDOUT_FILENO);
}
int unlzma_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int unlzma_main(int argc UNUSED_PARAM, char **argv)
{
IF_LZMA(int opts =) getopt32(argv, "cfvdt");
# if ENABLE_LZMA
/* lzma without -d or -t? */
if (applet_name[2] == 'm' && !(opts & (OPT_DECOMPRESS|OPT_TEST)))
bb_show_usage();
# endif
/* lzcat? */
if (applet_name[2] == 'c')
option_mask32 |= OPT_STDOUT;
argv += optind;
return bbunpack(argv, unpack_unlzma, make_new_name_generic, "lzma");
}
#endif
#if ENABLE_UNXZ
static
IF_DESKTOP(long long) int FAST_FUNC unpack_unxz(unpack_info_t *info UNUSED_PARAM)
{
struct {
uint32_t v1;
uint16_t v2;
} magic;
xread(STDIN_FILENO, &magic, 6);
if (magic.v1 != XZ_MAGIC1a || magic.v2 != XZ_MAGIC2a) {
bb_error_msg("invalid magic");
return -1;
}
return unpack_xz_stream(STDIN_FILENO, STDOUT_FILENO);
}
int unxz_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int unxz_main(int argc UNUSED_PARAM, char **argv)
{
IF_XZ(int opts =) getopt32(argv, "cfvdt");
# if ENABLE_XZ
/* xz without -d or -t? */
if (applet_name[2] == '\0' && !(opts & (OPT_DECOMPRESS|OPT_TEST)))
bb_show_usage();
# endif
/* xzcat? */
if (applet_name[2] == 'c')
option_mask32 |= OPT_STDOUT;
argv += optind;
return bbunpack(argv, unpack_unxz, make_new_name_generic, "xz");
}
#endif
-61
View File
@@ -1,61 +0,0 @@
#!/bin/sh
# Test that concatenated gz files are unpacking correctly.
# It also tests that unpacking in general is working right.
# Since zip code has many corner cases, run it for a few hours
# to get a decent coverage (200000 tests or more).
gzip="gzip"
gunzip="../busybox gunzip"
# Or the other way around:
#gzip="../busybox gzip"
#gunzip="gunzip"
c=0
i=$PID
while true; do
c=$((c+1))
# RANDOM is not very random on some shells. Spice it up.
# 100003 is prime
len1=$(( (((RANDOM*RANDOM)^i) & 0x7ffffff) % 100003 ))
i=$((i * 1664525 + 1013904223))
len2=$(( (((RANDOM*RANDOM)^i) & 0x7ffffff) % 100003 ))
# Just using urandom will make gzip use method 0 (store) -
# not good for test coverage!
cat /dev/urandom | while true; do read junk; echo "junk $c $i $junk"; done \
| dd bs=$len1 count=1 >z1 2>/dev/null
cat /dev/urandom | while true; do read junk; echo "junk $c $i $junk"; done \
| dd bs=$len2 count=1 >z2 2>/dev/null
$gzip <z1 >zz.gz
$gzip <z2 >>zz.gz
$gunzip -c zz.gz >z9 || {
echo "Exitcode $?"
exit
}
sum=`cat z1 z2 | md5sum`
sum9=`md5sum <z9`
test "$sum" == "$sum9" || {
echo "md5sums don't match"
exit
}
echo "Test $c ok: len1=$len1 len2=$len2 sum=$sum"
sum=`cat z1 z2 z1 z2 | md5sum`
rm z1.gz z2.gz 2>/dev/null
$gzip z1
$gzip z2
cat z1.gz z2.gz z1.gz z2.gz >zz.gz
$gunzip -c zz.gz >z9 || {
echo "Exitcode $? (2)"
exit
}
sum9=`md5sum <z9`
test "$sum" == "$sum9" || {
echo "md5sums don't match (1)"
exit
}
echo "Test $c ok: len1=$len1 len2=$len2 sum=$sum (2)"
done
-10
View File
@@ -1,10 +0,0 @@
#!/bin/sh
# Leak test for gunzip. Watch top for growing process size.
# Just using urandom will make gzip use method 0 (store) -
# not good for test coverage!
cat /dev/urandom \
| while true; do read junk; echo "junk $RANDOM $junk"; done \
| ../busybox gzip \
| ../busybox gunzip -c >/dev/null
-23
View File
@@ -1,23 +0,0 @@
#!/bin/sh
# Leak test for gunzip. Watch top for growing process size.
# In this case we look for leaks in "concatenated .gz" code -
# we feed gunzip with a stream of .gz files.
i=$PID
c=0
while true; do
c=$((c + 1))
echo "Block# $c" >&2
# RANDOM is not very random on some shells. Spice it up.
i=$((i * 1664525 + 1013904223))
# 100003 is prime
len=$(( (((RANDOM*RANDOM)^i) & 0x7ffffff) % 100003 ))
# Just using urandom will make gzip use method 0 (store) -
# not good for test coverage!
cat /dev/urandom \
| while true; do read junk; echo "junk $c $i $junk"; done \
| dd bs=$len count=1 2>/dev/null \
| gzip >xxx.gz
cat xxx.gz xxx.gz xxx.gz xxx.gz xxx.gz xxx.gz xxx.gz xxx.gz
done | ../busybox gunzip -c >/dev/null
-44
View File
@@ -1,44 +0,0 @@
bzip2 applet in busybox is based on lightly-modified source
of bzip2 version 1.0.4. bzip2 source is distributed
under the following conditions (copied verbatim from LICENSE file)
===========================================================
This program, "bzip2", the associated library "libbzip2", and all
documentation, are copyright (C) 1996-2006 Julian R Seward. All
rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product
documentation would be appreciated but is not required.
3. Altered source versions must be plainly marked as such, and must
not be misrepresented as being the original software.
4. The name of the author may not be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Julian Seward, Cambridge, UK.
jseward@bzip.org
bzip2/libbzip2 version 1.0.4 of 20 December 2006
-90
View File
@@ -1,90 +0,0 @@
This file is an abridged version of README from bzip2 1.0.4
Build instructions (which are not relevant to busyboxed bzip2)
are removed.
===========================================================
This is the README for bzip2/libzip2.
This version is fully compatible with the previous public releases.
------------------------------------------------------------------
This file is part of bzip2/libbzip2, a program and library for
lossless, block-sorting data compression.
bzip2/libbzip2 version 1.0.4 of 20 December 2006
Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
Please read the WARNING, DISCLAIMER and PATENTS sections in this file.
This program is released under the terms of the license contained
in the file LICENSE.
------------------------------------------------------------------
Please read and be aware of the following:
WARNING:
This program and library (attempts to) compress data by
performing several non-trivial transformations on it.
Unless you are 100% familiar with *all* the algorithms
contained herein, and with the consequences of modifying them,
you should NOT meddle with the compression or decompression
machinery. Incorrect changes can and very likely *will*
lead to disastrous loss of data.
DISCLAIMER:
I TAKE NO RESPONSIBILITY FOR ANY LOSS OF DATA ARISING FROM THE
USE OF THIS PROGRAM/LIBRARY, HOWSOEVER CAUSED.
Every compression of a file implies an assumption that the
compressed file can be decompressed to reproduce the original.
Great efforts in design, coding and testing have been made to
ensure that this program works correctly. However, the complexity
of the algorithms, and, in particular, the presence of various
special cases in the code which occur with very low but non-zero
probability make it impossible to rule out the possibility of bugs
remaining in the program. DO NOT COMPRESS ANY DATA WITH THIS
PROGRAM UNLESS YOU ARE PREPARED TO ACCEPT THE POSSIBILITY, HOWEVER
SMALL, THAT THE DATA WILL NOT BE RECOVERABLE.
That is not to say this program is inherently unreliable.
Indeed, I very much hope the opposite is true. bzip2/libbzip2
has been carefully constructed and extensively tested.
PATENTS:
To the best of my knowledge, bzip2/libbzip2 does not use any
patented algorithms. However, I do not have the resources
to carry out a patent search. Therefore I cannot give any
guarantee of the above statement.
I hope you find bzip2 useful. Feel free to contact me at
jseward@bzip.org
if you have any suggestions or queries. Many people mailed me with
comments, suggestions and patches after the releases of bzip-0.15,
bzip-0.21, and bzip2 versions 0.1pl2, 0.9.0, 0.9.5, 1.0.0, 1.0.1,
1.0.2 and 1.0.3, and the changes in bzip2 are largely a result of this
feedback. I thank you for your comments.
bzip2's "home" is http://www.bzip.org/
Julian Seward
jseward@bzip.org
Cambridge, UK.
18 July 1996 (version 0.15)
25 August 1996 (version 0.21)
7 August 1997 (bzip2, version 0.1)
29 August 1997 (bzip2, version 0.1pl2)
23 August 1998 (bzip2, version 0.9.0)
8 June 1999 (bzip2, version 0.9.5)
4 Sept 1999 (bzip2, version 0.9.5d)
5 May 2000 (bzip2, version 1.0pre8)
30 December 2001 (bzip2, version 1.0.2pre1)
15 February 2005 (bzip2, version 1.0.3)
20 December 2006 (bzip2, version 1.0.4)
File diff suppressed because it is too large. Load diff
-431
View File
@@ -1,431 +0,0 @@
/*
* bzip2 is written by Julian Seward <jseward@bzip.org>.
* Adapted for busybox by Denys Vlasenko <vda.linux@googlemail.com>.
* See README and LICENSE files in this directory for more information.
*/
/*-------------------------------------------------------------*/
/*--- Library top-level functions. ---*/
/*--- bzlib.c ---*/
/*-------------------------------------------------------------*/
/* ------------------------------------------------------------------
This file is part of bzip2/libbzip2, a program and library for
lossless, block-sorting data compression.
bzip2/libbzip2 version 1.0.4 of 20 December 2006
Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
Please read the WARNING, DISCLAIMER and PATENTS sections in the
README file.
This program is released under the terms of the license contained
in the file LICENSE.
------------------------------------------------------------------ */
/* CHANGES
* 0.9.0 -- original version.
* 0.9.0a/b -- no changes in this file.
* 0.9.0c -- made zero-length BZ_FLUSH work correctly in bzCompress().
* fixed bzWrite/bzRead to ignore zero-length requests.
* fixed bzread to correctly handle read requests after EOF.
* wrong parameter order in call to bzDecompressInit in
* bzBuffToBuffDecompress. Fixed.
*/
/* #include "bzlib_private.h" */
/*---------------------------------------------------*/
/*--- Compression stuff ---*/
/*---------------------------------------------------*/
/*---------------------------------------------------*/
#if BZ_LIGHT_DEBUG
static
void bz_assert_fail(int errcode)
{
/* if (errcode == 1007) bb_error_msg_and_die("probably bad RAM"); */
bb_error_msg_and_die("internal error %d", errcode);
}
#endif
/*---------------------------------------------------*/
static
void prepare_new_block(EState* s)
{
int i;
s->nblock = 0;
s->numZ = 0;
s->state_out_pos = 0;
BZ_INITIALISE_CRC(s->blockCRC);
/* inlined memset would be nice to have here */
for (i = 0; i < 256; i++)
s->inUse[i] = 0;
s->blockNo++;
}
/*---------------------------------------------------*/
static
ALWAYS_INLINE
void init_RL(EState* s)
{
s->state_in_ch = 256;
s->state_in_len = 0;
}
static
int isempty_RL(EState* s)
{
return (s->state_in_ch >= 256 || s->state_in_len <= 0);
}
/*---------------------------------------------------*/
static
void BZ2_bzCompressInit(bz_stream *strm, int blockSize100k)
{
int32_t n;
EState* s;
s = xzalloc(sizeof(EState));
s->strm = strm;
n = 100000 * blockSize100k;
s->arr1 = xmalloc(n * sizeof(uint32_t));
s->mtfv = (uint16_t*)s->arr1;
s->ptr = (uint32_t*)s->arr1;
s->arr2 = xmalloc((n + BZ_N_OVERSHOOT) * sizeof(uint32_t));
s->block = (uint8_t*)s->arr2;
s->ftab = xmalloc(65537 * sizeof(uint32_t));
s->crc32table = crc32_filltable(NULL, 1);
s->state = BZ_S_INPUT;
s->mode = BZ_M_RUNNING;
s->blockSize100k = blockSize100k;
s->nblockMAX = n - 19;
strm->state = s;
/*strm->total_in = 0;*/
strm->total_out = 0;
init_RL(s);
prepare_new_block(s);
}
/*---------------------------------------------------*/
static
void add_pair_to_block(EState* s)
{
int32_t i;
uint8_t ch = (uint8_t)(s->state_in_ch);
for (i = 0; i < s->state_in_len; i++) {
BZ_UPDATE_CRC(s, s->blockCRC, ch);
}
s->inUse[s->state_in_ch] = 1;
switch (s->state_in_len) {
case 3:
s->block[s->nblock] = (uint8_t)ch; s->nblock++;
/* fall through */
case 2:
s->block[s->nblock] = (uint8_t)ch; s->nblock++;
/* fall through */
case 1:
s->block[s->nblock] = (uint8_t)ch; s->nblock++;
break;
default:
s->inUse[s->state_in_len - 4] = 1;
s->block[s->nblock] = (uint8_t)ch; s->nblock++;
s->block[s->nblock] = (uint8_t)ch; s->nblock++;
s->block[s->nblock] = (uint8_t)ch; s->nblock++;
s->block[s->nblock] = (uint8_t)ch; s->nblock++;
s->block[s->nblock] = (uint8_t)(s->state_in_len - 4);
s->nblock++;
break;
}
}
/*---------------------------------------------------*/
static
void flush_RL(EState* s)
{
if (s->state_in_ch < 256) add_pair_to_block(s);
init_RL(s);
}
/*---------------------------------------------------*/
#define ADD_CHAR_TO_BLOCK(zs, zchh0) \
{ \
uint32_t zchh = (uint32_t)(zchh0); \
/*-- fast track the common case --*/ \
if (zchh != zs->state_in_ch && zs->state_in_len == 1) { \
uint8_t ch = (uint8_t)(zs->state_in_ch); \
BZ_UPDATE_CRC(zs, zs->blockCRC, ch); \
zs->inUse[zs->state_in_ch] = 1; \
zs->block[zs->nblock] = (uint8_t)ch; \
zs->nblock++; \
zs->state_in_ch = zchh; \
} \
else \
/*-- general, uncommon cases --*/ \
if (zchh != zs->state_in_ch || zs->state_in_len == 255) { \
if (zs->state_in_ch < 256) \
add_pair_to_block(zs); \
zs->state_in_ch = zchh; \
zs->state_in_len = 1; \
} else { \
zs->state_in_len++; \
} \
}
/*---------------------------------------------------*/
static
void /*Bool*/ copy_input_until_stop(EState* s)
{
/*Bool progress_in = False;*/
#ifdef SAME_CODE_AS_BELOW
if (s->mode == BZ_M_RUNNING) {
/*-- fast track the common case --*/
while (1) {
/*-- no input? --*/
if (s->strm->avail_in == 0) break;
/*-- block full? --*/
if (s->nblock >= s->nblockMAX) break;
/*progress_in = True;*/
ADD_CHAR_TO_BLOCK(s, (uint32_t)(*(uint8_t*)(s->strm->next_in)));
s->strm->next_in++;
s->strm->avail_in--;
/*s->strm->total_in++;*/
}
} else
#endif
{
/*-- general, uncommon case --*/
while (1) {
/*-- no input? --*/
if (s->strm->avail_in == 0) break;
/*-- block full? --*/
if (s->nblock >= s->nblockMAX) break;
//# /*-- flush/finish end? --*/
//# if (s->avail_in_expect == 0) break;
/*progress_in = True;*/
ADD_CHAR_TO_BLOCK(s, *(uint8_t*)(s->strm->next_in));
s->strm->next_in++;
s->strm->avail_in--;
/*s->strm->total_in++;*/
//# s->avail_in_expect--;
}
}
/*return progress_in;*/
}
/*---------------------------------------------------*/
static
void /*Bool*/ copy_output_until_stop(EState* s)
{
/*Bool progress_out = False;*/
while (1) {
/*-- no output space? --*/
if (s->strm->avail_out == 0) break;
/*-- block done? --*/
if (s->state_out_pos >= s->numZ) break;
/*progress_out = True;*/
*(s->strm->next_out) = s->zbits[s->state_out_pos];
s->state_out_pos++;
s->strm->avail_out--;
s->strm->next_out++;
s->strm->total_out++;
}
/*return progress_out;*/
}
/*---------------------------------------------------*/
static
void /*Bool*/ handle_compress(bz_stream *strm)
{
/*Bool progress_in = False;*/
/*Bool progress_out = False;*/
EState* s = strm->state;
while (1) {
if (s->state == BZ_S_OUTPUT) {
/*progress_out |=*/ copy_output_until_stop(s);
if (s->state_out_pos < s->numZ) break;
if (s->mode == BZ_M_FINISHING
//# && s->avail_in_expect == 0
&& s->strm->avail_in == 0
&& isempty_RL(s))
break;
prepare_new_block(s);
s->state = BZ_S_INPUT;
#ifdef FLUSH_IS_UNUSED
if (s->mode == BZ_M_FLUSHING
&& s->avail_in_expect == 0
&& isempty_RL(s))
break;
#endif
}
if (s->state == BZ_S_INPUT) {
/*progress_in |=*/ copy_input_until_stop(s);
//#if (s->mode != BZ_M_RUNNING && s->avail_in_expect == 0) {
if (s->mode != BZ_M_RUNNING && s->strm->avail_in == 0) {
flush_RL(s);
BZ2_compressBlock(s, (s->mode == BZ_M_FINISHING));
s->state = BZ_S_OUTPUT;
} else
if (s->nblock >= s->nblockMAX) {
BZ2_compressBlock(s, 0);
s->state = BZ_S_OUTPUT;
} else
if (s->strm->avail_in == 0) {
break;
}
}
}
/*return progress_in || progress_out;*/
}
/*---------------------------------------------------*/
static
int BZ2_bzCompress(bz_stream *strm, int action)
{
/*Bool progress;*/
EState* s;
s = strm->state;
switch (s->mode) {
case BZ_M_RUNNING:
if (action == BZ_RUN) {
/*progress =*/ handle_compress(strm);
/*return progress ? BZ_RUN_OK : BZ_PARAM_ERROR;*/
return BZ_RUN_OK;
}
#ifdef FLUSH_IS_UNUSED
else
if (action == BZ_FLUSH) {
//#s->avail_in_expect = strm->avail_in;
s->mode = BZ_M_FLUSHING;
goto case_BZ_M_FLUSHING;
}
#endif
else
/*if (action == BZ_FINISH)*/ {
//#s->avail_in_expect = strm->avail_in;
s->mode = BZ_M_FINISHING;
goto case_BZ_M_FINISHING;
}
#ifdef FLUSH_IS_UNUSED
case_BZ_M_FLUSHING:
case BZ_M_FLUSHING:
/*if (s->avail_in_expect != s->strm->avail_in)
return BZ_SEQUENCE_ERROR;*/
/*progress =*/ handle_compress(strm);
if (s->avail_in_expect > 0 || !isempty_RL(s) || s->state_out_pos < s->numZ)
return BZ_FLUSH_OK;
s->mode = BZ_M_RUNNING;
return BZ_RUN_OK;
#endif
case_BZ_M_FINISHING:
/*case BZ_M_FINISHING:*/
default:
/*if (s->avail_in_expect != s->strm->avail_in)
return BZ_SEQUENCE_ERROR;*/
/*progress =*/ handle_compress(strm);
/*if (!progress) return BZ_SEQUENCE_ERROR;*/
//#if (s->avail_in_expect > 0 || !isempty_RL(s) || s->state_out_pos < s->numZ)
//# return BZ_FINISH_OK;
if (s->strm->avail_in > 0 || !isempty_RL(s) || s->state_out_pos < s->numZ)
return BZ_FINISH_OK;
/*s->mode = BZ_M_IDLE;*/
return BZ_STREAM_END;
}
/* return BZ_OK; --not reached--*/
}
/*---------------------------------------------------*/
#if ENABLE_FEATURE_CLEAN_UP
static
void BZ2_bzCompressEnd(bz_stream *strm)
{
EState* s;
s = strm->state;
free(s->arr1);
free(s->arr2);
free(s->ftab);
free(s->crc32table);
free(strm->state);
}
#endif
/*---------------------------------------------------*/
/*--- Misc convenience stuff ---*/
/*---------------------------------------------------*/
/*---------------------------------------------------*/
#ifdef EXAMPLE_CODE_FOR_MEM_TO_MEM_COMPRESSION
static
int BZ2_bzBuffToBuffCompress(char* dest,
unsigned int* destLen,
char* source,
unsigned int sourceLen,
int blockSize100k)
{
bz_stream strm;
int ret;
if (dest == NULL || destLen == NULL
|| source == NULL
|| blockSize100k < 1 || blockSize100k > 9
) {
return BZ_PARAM_ERROR;
}
BZ2_bzCompressInit(&strm, blockSize100k);
strm.next_in = source;
strm.next_out = dest;
strm.avail_in = sourceLen;
strm.avail_out = *destLen;
ret = BZ2_bzCompress(&strm, BZ_FINISH);
if (ret == BZ_FINISH_OK) goto output_overflow;
if (ret != BZ_STREAM_END) goto errhandler;
/* normal termination */
*destLen -= strm.avail_out;
BZ2_bzCompressEnd(&strm);
return BZ_OK;
output_overflow:
BZ2_bzCompressEnd(&strm);
return BZ_OUTBUFF_FULL;
errhandler:
BZ2_bzCompressEnd(&strm);
return ret;
}
#endif
/*-------------------------------------------------------------*/
/*--- end bzlib.c ---*/
/*-------------------------------------------------------------*/
-65
View File
@@ -1,65 +0,0 @@
/*
* bzip2 is written by Julian Seward <jseward@bzip.org>.
* Adapted for busybox by Denys Vlasenko <vda.linux@googlemail.com>.
* See README and LICENSE files in this directory for more information.
*/
/*-------------------------------------------------------------*/
/*--- Public header file for the library. ---*/
/*--- bzlib.h ---*/
/*-------------------------------------------------------------*/
/* ------------------------------------------------------------------
This file is part of bzip2/libbzip2, a program and library for
lossless, block-sorting data compression.
bzip2/libbzip2 version 1.0.4 of 20 December 2006
Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
Please read the WARNING, DISCLAIMER and PATENTS sections in the
README file.
This program is released under the terms of the license contained
in the file LICENSE.
------------------------------------------------------------------ */
#define BZ_RUN 0
#define BZ_FLUSH 1
#define BZ_FINISH 2
#define BZ_OK 0
#define BZ_RUN_OK 1
#define BZ_FLUSH_OK 2
#define BZ_FINISH_OK 3
#define BZ_STREAM_END 4
#define BZ_SEQUENCE_ERROR (-1)
#define BZ_PARAM_ERROR (-2)
#define BZ_MEM_ERROR (-3)
#define BZ_DATA_ERROR (-4)
#define BZ_DATA_ERROR_MAGIC (-5)
#define BZ_IO_ERROR (-6)
#define BZ_UNEXPECTED_EOF (-7)
#define BZ_OUTBUFF_FULL (-8)
#define BZ_CONFIG_ERROR (-9)
typedef struct bz_stream {
void *state;
char *next_in;
char *next_out;
unsigned avail_in;
unsigned avail_out;
/*unsigned long long total_in;*/
unsigned long long total_out;
} bz_stream;
/*-- Core (low-level) library functions --*/
static void BZ2_bzCompressInit(bz_stream *strm, int blockSize100k);
static int BZ2_bzCompress(bz_stream *strm, int action);
#if ENABLE_FEATURE_CLEAN_UP
static void BZ2_bzCompressEnd(bz_stream *strm);
#endif
/*-------------------------------------------------------------*/
/*--- end bzlib.h ---*/
/*-------------------------------------------------------------*/
-219
View File
@@ -1,219 +0,0 @@
/*
* bzip2 is written by Julian Seward <jseward@bzip.org>.
* Adapted for busybox by Denys Vlasenko <vda.linux@googlemail.com>.
* See README and LICENSE files in this directory for more information.
*/
/*-------------------------------------------------------------*/
/*--- Private header file for the library. ---*/
/*--- bzlib_private.h ---*/
/*-------------------------------------------------------------*/
/* ------------------------------------------------------------------
This file is part of bzip2/libbzip2, a program and library for
lossless, block-sorting data compression.
bzip2/libbzip2 version 1.0.4 of 20 December 2006
Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
Please read the WARNING, DISCLAIMER and PATENTS sections in the
README file.
This program is released under the terms of the license contained
in the file LICENSE.
------------------------------------------------------------------ */
/* #include "bzlib.h" */
/*-- General stuff. --*/
typedef unsigned char Bool;
#define True ((Bool)1)
#define False ((Bool)0)
#if BZ_LIGHT_DEBUG
static void bz_assert_fail(int errcode) NORETURN;
#define AssertH(cond, errcode) \
do { \
if (!(cond)) \
bz_assert_fail(errcode); \
} while (0)
#else
#define AssertH(cond, msg) do { } while (0)
#endif
#if BZ_DEBUG
#define AssertD(cond, msg) \
do { \
if (!(cond)) \
bb_error_msg_and_die("(debug build): internal error %s", msg); \
} while (0)
#else
#define AssertD(cond, msg) do { } while (0)
#endif
/*-- Header bytes. --*/
#define BZ_HDR_B 0x42 /* 'B' */
#define BZ_HDR_Z 0x5a /* 'Z' */
#define BZ_HDR_h 0x68 /* 'h' */
#define BZ_HDR_0 0x30 /* '0' */
#define BZ_HDR_BZh0 0x425a6830
/*-- Constants for the back end. --*/
#define BZ_MAX_ALPHA_SIZE 258
#define BZ_MAX_CODE_LEN 23
#define BZ_RUNA 0
#define BZ_RUNB 1
#define BZ_N_GROUPS 6
#define BZ_G_SIZE 50
#define BZ_N_ITERS 4
#define BZ_MAX_SELECTORS (2 + (900000 / BZ_G_SIZE))
/*-- Stuff for doing CRCs. --*/
#define BZ_INITIALISE_CRC(crcVar) \
{ \
crcVar = 0xffffffffL; \
}
#define BZ_FINALISE_CRC(crcVar) \
{ \
crcVar = ~(crcVar); \
}
#define BZ_UPDATE_CRC(s, crcVar, cha) \
{ \
crcVar = (crcVar << 8) ^ s->crc32table[(crcVar >> 24) ^ ((uint8_t)cha)]; \
}
/*-- States and modes for compression. --*/
#define BZ_M_IDLE 1
#define BZ_M_RUNNING 2
#define BZ_M_FLUSHING 3
#define BZ_M_FINISHING 4
#define BZ_S_OUTPUT 1
#define BZ_S_INPUT 2
#define BZ_N_RADIX 2
#define BZ_N_QSORT 12
#define BZ_N_SHELL 18
#define BZ_N_OVERSHOOT (BZ_N_RADIX + BZ_N_QSORT + BZ_N_SHELL + 2)
/*-- Structure holding all the compression-side stuff. --*/
typedef struct EState {
/* pointer back to the struct bz_stream */
bz_stream *strm;
/* mode this stream is in, and whether inputting */
/* or outputting data */
int32_t mode;
int32_t state;
/* remembers avail_in when flush/finish requested */
/* bbox: not needed, strm->avail_in always has the same value */
/* commented out with '//#' throughout the code */
/* uint32_t avail_in_expect; */
/* for doing the block sorting */
int32_t origPtr;
uint32_t *arr1;
uint32_t *arr2;
uint32_t *ftab;
/* aliases for arr1 and arr2 */
uint32_t *ptr;
uint8_t *block;
uint16_t *mtfv;
uint8_t *zbits;
/* guess what */
uint32_t *crc32table;
/* run-length-encoding of the input */
uint32_t state_in_ch;
int32_t state_in_len;
/* input and output limits and current posns */
int32_t nblock;
int32_t nblockMAX;
int32_t numZ;
int32_t state_out_pos;
/* the buffer for bit stream creation */
uint32_t bsBuff;
int32_t bsLive;
/* block and combined CRCs */
uint32_t blockCRC;
uint32_t combinedCRC;
/* misc administratium */
int32_t blockNo;
int32_t blockSize100k;
/* stuff for coding the MTF values */
int32_t nMTF;
/* map of bytes used in block */
int32_t nInUse;
Bool inUse[256] ALIGNED(sizeof(long));
uint8_t unseqToSeq[256];
/* stuff for coding the MTF values */
int32_t mtfFreq [BZ_MAX_ALPHA_SIZE];
uint8_t selector [BZ_MAX_SELECTORS];
uint8_t selectorMtf[BZ_MAX_SELECTORS];
uint8_t len[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
/* stack-saving measures: these can be local, but they are too big */
int32_t sendMTFValues__code [BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
int32_t sendMTFValues__rfreq[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
#if CONFIG_BZIP2_FEATURE_SPEED >= 5
/* second dimension: only 3 needed; 4 makes index calculations faster */
uint32_t sendMTFValues__len_pack[BZ_MAX_ALPHA_SIZE][4];
#endif
int32_t BZ2_hbMakeCodeLengths__heap [BZ_MAX_ALPHA_SIZE + 2];
int32_t BZ2_hbMakeCodeLengths__weight[BZ_MAX_ALPHA_SIZE * 2];
int32_t BZ2_hbMakeCodeLengths__parent[BZ_MAX_ALPHA_SIZE * 2];
int32_t mainSort__runningOrder[256];
int32_t mainSort__copyStart[256];
int32_t mainSort__copyEnd[256];
} EState;
/*-- compression. --*/
static void
BZ2_blockSort(EState*);
static void
BZ2_compressBlock(EState*, int);
static void
BZ2_bsInitWrite(EState*);
static void
BZ2_hbAssignCodes(int32_t*, uint8_t*, int32_t, int32_t, int32_t);
static void
BZ2_hbMakeCodeLengths(EState*, uint8_t*, int32_t*, int32_t, int32_t);
/*-------------------------------------------------------------*/
/*--- end bzlib_private.h ---*/
/*-------------------------------------------------------------*/
-687
View File
@@ -1,687 +0,0 @@
/*
* bzip2 is written by Julian Seward <jseward@bzip.org>.
* Adapted for busybox by Denys Vlasenko <vda.linux@googlemail.com>.
* See README and LICENSE files in this directory for more information.
*/
/*-------------------------------------------------------------*/
/*--- Compression machinery (not incl block sorting) ---*/
/*--- compress.c ---*/
/*-------------------------------------------------------------*/
/* ------------------------------------------------------------------
This file is part of bzip2/libbzip2, a program and library for
lossless, block-sorting data compression.
bzip2/libbzip2 version 1.0.4 of 20 December 2006
Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
Please read the WARNING, DISCLAIMER and PATENTS sections in the
README file.
This program is released under the terms of the license contained
in the file LICENSE.
------------------------------------------------------------------ */
/* CHANGES
* 0.9.0 -- original version.
* 0.9.0a/b -- no changes in this file.
* 0.9.0c -- changed setting of nGroups in sendMTFValues()
* so as to do a bit better on small files
*/
/* #include "bzlib_private.h" */
/*---------------------------------------------------*/
/*--- Bit stream I/O ---*/
/*---------------------------------------------------*/
/*---------------------------------------------------*/
static
void BZ2_bsInitWrite(EState* s)
{
s->bsLive = 0;
s->bsBuff = 0;
}
/*---------------------------------------------------*/
static NOINLINE
void bsFinishWrite(EState* s)
{
while (s->bsLive > 0) {
s->zbits[s->numZ] = (uint8_t)(s->bsBuff >> 24);
s->numZ++;
s->bsBuff <<= 8;
s->bsLive -= 8;
}
}
/*---------------------------------------------------*/
static
/* Helps only on level 5, on other levels hurts. ? */
#if CONFIG_BZIP2_FEATURE_SPEED >= 5
ALWAYS_INLINE
#endif
void bsW(EState* s, int32_t n, uint32_t v)
{
while (s->bsLive >= 8) {
s->zbits[s->numZ] = (uint8_t)(s->bsBuff >> 24);
s->numZ++;
s->bsBuff <<= 8;
s->bsLive -= 8;
}
s->bsBuff |= (v << (32 - s->bsLive - n));
s->bsLive += n;
}
/*---------------------------------------------------*/
static
void bsPutU32(EState* s, unsigned u)
{
bsW(s, 8, (u >> 24) & 0xff);
bsW(s, 8, (u >> 16) & 0xff);
bsW(s, 8, (u >> 8) & 0xff);
bsW(s, 8, u & 0xff);
}
/*---------------------------------------------------*/
static
void bsPutU16(EState* s, unsigned u)
{
bsW(s, 8, (u >> 8) & 0xff);
bsW(s, 8, u & 0xff);
}
/*---------------------------------------------------*/
/*--- The back end proper ---*/
/*---------------------------------------------------*/
/*---------------------------------------------------*/
static
void makeMaps_e(EState* s)
{
int i;
s->nInUse = 0;
for (i = 0; i < 256; i++) {
if (s->inUse[i]) {
s->unseqToSeq[i] = s->nInUse;
s->nInUse++;
}
}
}
/*---------------------------------------------------*/
static NOINLINE
void generateMTFValues(EState* s)
{
uint8_t yy[256];
int32_t i, j;
int32_t zPend;
int32_t wr;
int32_t EOB;
/*
* After sorting (eg, here),
* s->arr1[0 .. s->nblock-1] holds sorted order,
* and
* ((uint8_t*)s->arr2)[0 .. s->nblock-1]
* holds the original block data.
*
* The first thing to do is generate the MTF values,
* and put them in
* ((uint16_t*)s->arr1)[0 .. s->nblock-1].
* Because there are strictly fewer or equal MTF values
* than block values, ptr values in this area are overwritten
* with MTF values only when they are no longer needed.
*
* The final compressed bitstream is generated into the
* area starting at
* &((uint8_t*)s->arr2)[s->nblock]
*
* These storage aliases are set up in bzCompressInit(),
* except for the last one, which is arranged in
* compressBlock().
*/
uint32_t* ptr = s->ptr;
uint8_t* block = s->block;
uint16_t* mtfv = s->mtfv;
makeMaps_e(s);
EOB = s->nInUse+1;
for (i = 0; i <= EOB; i++)
s->mtfFreq[i] = 0;
wr = 0;
zPend = 0;
for (i = 0; i < s->nInUse; i++)
yy[i] = (uint8_t) i;
for (i = 0; i < s->nblock; i++) {
uint8_t ll_i;
AssertD(wr <= i, "generateMTFValues(1)");
j = ptr[i] - 1;
if (j < 0)
j += s->nblock;
ll_i = s->unseqToSeq[block[j]];
AssertD(ll_i < s->nInUse, "generateMTFValues(2a)");
if (yy[0] == ll_i) {
zPend++;
} else {
if (zPend > 0) {
zPend--;
while (1) {
if (zPend & 1) {
mtfv[wr] = BZ_RUNB; wr++;
s->mtfFreq[BZ_RUNB]++;
} else {
mtfv[wr] = BZ_RUNA; wr++;
s->mtfFreq[BZ_RUNA]++;
}
if (zPend < 2) break;
zPend = (uint32_t)(zPend - 2) / 2;
/* bbox: unsigned div is easier */
};
zPend = 0;
}
{
register uint8_t rtmp;
register uint8_t* ryy_j;
register uint8_t rll_i;
rtmp = yy[1];
yy[1] = yy[0];
ryy_j = &(yy[1]);
rll_i = ll_i;
while (rll_i != rtmp) {
register uint8_t rtmp2;
ryy_j++;
rtmp2 = rtmp;
rtmp = *ryy_j;
*ryy_j = rtmp2;
};
yy[0] = rtmp;
j = ryy_j - &(yy[0]);
mtfv[wr] = j+1;
wr++;
s->mtfFreq[j+1]++;
}
}
}
if (zPend > 0) {
zPend--;
while (1) {
if (zPend & 1) {
mtfv[wr] = BZ_RUNB;
wr++;
s->mtfFreq[BZ_RUNB]++;
} else {
mtfv[wr] = BZ_RUNA;
wr++;
s->mtfFreq[BZ_RUNA]++;
}
if (zPend < 2)
break;
zPend = (uint32_t)(zPend - 2) / 2;
/* bbox: unsigned div is easier */
};
zPend = 0;
}
mtfv[wr] = EOB;
wr++;
s->mtfFreq[EOB]++;
s->nMTF = wr;
}
/*---------------------------------------------------*/
#define BZ_LESSER_ICOST 0
#define BZ_GREATER_ICOST 15
static NOINLINE
void sendMTFValues(EState* s)
{
int32_t v, t, i, j, gs, ge, totc, bt, bc, iter;
int32_t nSelectors, alphaSize, minLen, maxLen, selCtr;
int32_t nGroups, nBytes;
/*
* uint8_t len[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
* is a global since the decoder also needs it.
*
* int32_t code[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
* int32_t rfreq[BZ_N_GROUPS][BZ_MAX_ALPHA_SIZE];
* are also globals only used in this proc.
* Made global to keep stack frame size small.
*/
#define code sendMTFValues__code
#define rfreq sendMTFValues__rfreq
#define len_pack sendMTFValues__len_pack
uint16_t cost[BZ_N_GROUPS];
int32_t fave[BZ_N_GROUPS];
uint16_t* mtfv = s->mtfv;
alphaSize = s->nInUse + 2;
for (t = 0; t < BZ_N_GROUPS; t++)
for (v = 0; v < alphaSize; v++)
s->len[t][v] = BZ_GREATER_ICOST;
/*--- Decide how many coding tables to use ---*/
AssertH(s->nMTF > 0, 3001);
if (s->nMTF < 200) nGroups = 2; else
if (s->nMTF < 600) nGroups = 3; else
if (s->nMTF < 1200) nGroups = 4; else
if (s->nMTF < 2400) nGroups = 5; else
nGroups = 6;
/*--- Generate an initial set of coding tables ---*/
{
int32_t nPart, remF, tFreq, aFreq;
nPart = nGroups;
remF = s->nMTF;
gs = 0;
while (nPart > 0) {
tFreq = remF / nPart;
ge = gs - 1;
aFreq = 0;
while (aFreq < tFreq && ge < alphaSize-1) {
ge++;
aFreq += s->mtfFreq[ge];
}
if (ge > gs
&& nPart != nGroups && nPart != 1
&& ((nGroups - nPart) % 2 == 1) /* bbox: can this be replaced by x & 1? */
) {
aFreq -= s->mtfFreq[ge];
ge--;
}
for (v = 0; v < alphaSize; v++)
if (v >= gs && v <= ge)
s->len[nPart-1][v] = BZ_LESSER_ICOST;
else
s->len[nPart-1][v] = BZ_GREATER_ICOST;
nPart--;
gs = ge + 1;
remF -= aFreq;
}
}
/*
* Iterate up to BZ_N_ITERS times to improve the tables.
*/
for (iter = 0; iter < BZ_N_ITERS; iter++) {
for (t = 0; t < nGroups; t++)
fave[t] = 0;
for (t = 0; t < nGroups; t++)
for (v = 0; v < alphaSize; v++)
s->rfreq[t][v] = 0;
#if CONFIG_BZIP2_FEATURE_SPEED >= 5
/*
* Set up an auxiliary length table which is used to fast-track
* the common case (nGroups == 6).
*/
if (nGroups == 6) {
for (v = 0; v < alphaSize; v++) {
s->len_pack[v][0] = (s->len[1][v] << 16) | s->len[0][v];
s->len_pack[v][1] = (s->len[3][v] << 16) | s->len[2][v];
s->len_pack[v][2] = (s->len[5][v] << 16) | s->len[4][v];
}
}
#endif
nSelectors = 0;
totc = 0;
gs = 0;
while (1) {
/*--- Set group start & end marks. --*/
if (gs >= s->nMTF)
break;
ge = gs + BZ_G_SIZE - 1;
if (ge >= s->nMTF)
ge = s->nMTF-1;
/*
* Calculate the cost of this group as coded
* by each of the coding tables.
*/
for (t = 0; t < nGroups; t++)
cost[t] = 0;
#if CONFIG_BZIP2_FEATURE_SPEED >= 5
if (nGroups == 6 && 50 == ge-gs+1) {
/*--- fast track the common case ---*/
register uint32_t cost01, cost23, cost45;
register uint16_t icv;
cost01 = cost23 = cost45 = 0;
#define BZ_ITER(nn) \
icv = mtfv[gs+(nn)]; \
cost01 += s->len_pack[icv][0]; \
cost23 += s->len_pack[icv][1]; \
cost45 += s->len_pack[icv][2];
BZ_ITER(0); BZ_ITER(1); BZ_ITER(2); BZ_ITER(3); BZ_ITER(4);
BZ_ITER(5); BZ_ITER(6); BZ_ITER(7); BZ_ITER(8); BZ_ITER(9);
BZ_ITER(10); BZ_ITER(11); BZ_ITER(12); BZ_ITER(13); BZ_ITER(14);
BZ_ITER(15); BZ_ITER(16); BZ_ITER(17); BZ_ITER(18); BZ_ITER(19);
BZ_ITER(20); BZ_ITER(21); BZ_ITER(22); BZ_ITER(23); BZ_ITER(24);
BZ_ITER(25); BZ_ITER(26); BZ_ITER(27); BZ_ITER(28); BZ_ITER(29);
BZ_ITER(30); BZ_ITER(31); BZ_ITER(32); BZ_ITER(33); BZ_ITER(34);
BZ_ITER(35); BZ_ITER(36); BZ_ITER(37); BZ_ITER(38); BZ_ITER(39);
BZ_ITER(40); BZ_ITER(41); BZ_ITER(42); BZ_ITER(43); BZ_ITER(44);
BZ_ITER(45); BZ_ITER(46); BZ_ITER(47); BZ_ITER(48); BZ_ITER(49);
#undef BZ_ITER
cost[0] = cost01 & 0xffff; cost[1] = cost01 >> 16;
cost[2] = cost23 & 0xffff; cost[3] = cost23 >> 16;
cost[4] = cost45 & 0xffff; cost[5] = cost45 >> 16;
} else
#endif
{
/*--- slow version which correctly handles all situations ---*/
for (i = gs; i <= ge; i++) {
uint16_t icv = mtfv[i];
for (t = 0; t < nGroups; t++)
cost[t] += s->len[t][icv];
}
}
/*
* Find the coding table which is best for this group,
* and record its identity in the selector table.
*/
/*bc = 999999999;*/
/*bt = -1;*/
bc = cost[0];
bt = 0;
for (t = 1 /*0*/; t < nGroups; t++) {
if (cost[t] < bc) {
bc = cost[t];
bt = t;
}
}
totc += bc;
fave[bt]++;
s->selector[nSelectors] = bt;
nSelectors++;
/*
* Increment the symbol frequencies for the selected table.
*/
/* 1% faster compress. +800 bytes */
#if CONFIG_BZIP2_FEATURE_SPEED >= 4
if (nGroups == 6 && 50 == ge-gs+1) {
/*--- fast track the common case ---*/
#define BZ_ITUR(nn) s->rfreq[bt][mtfv[gs + (nn)]]++
BZ_ITUR(0); BZ_ITUR(1); BZ_ITUR(2); BZ_ITUR(3); BZ_ITUR(4);
BZ_ITUR(5); BZ_ITUR(6); BZ_ITUR(7); BZ_ITUR(8); BZ_ITUR(9);
BZ_ITUR(10); BZ_ITUR(11); BZ_ITUR(12); BZ_ITUR(13); BZ_ITUR(14);
BZ_ITUR(15); BZ_ITUR(16); BZ_ITUR(17); BZ_ITUR(18); BZ_ITUR(19);
BZ_ITUR(20); BZ_ITUR(21); BZ_ITUR(22); BZ_ITUR(23); BZ_ITUR(24);
BZ_ITUR(25); BZ_ITUR(26); BZ_ITUR(27); BZ_ITUR(28); BZ_ITUR(29);
BZ_ITUR(30); BZ_ITUR(31); BZ_ITUR(32); BZ_ITUR(33); BZ_ITUR(34);
BZ_ITUR(35); BZ_ITUR(36); BZ_ITUR(37); BZ_ITUR(38); BZ_ITUR(39);
BZ_ITUR(40); BZ_ITUR(41); BZ_ITUR(42); BZ_ITUR(43); BZ_ITUR(44);
BZ_ITUR(45); BZ_ITUR(46); BZ_ITUR(47); BZ_ITUR(48); BZ_ITUR(49);
#undef BZ_ITUR
gs = ge + 1;
} else
#endif
{
/*--- slow version which correctly handles all situations ---*/
while (gs <= ge) {
s->rfreq[bt][mtfv[gs]]++;
gs++;
}
/* already is: gs = ge + 1; */
}
}
/*
* Recompute the tables based on the accumulated frequencies.
*/
/* maxLen was changed from 20 to 17 in bzip2-1.0.3. See
* comment in huffman.c for details. */
for (t = 0; t < nGroups; t++)
BZ2_hbMakeCodeLengths(s, &(s->len[t][0]), &(s->rfreq[t][0]), alphaSize, 17 /*20*/);
}
AssertH(nGroups < 8, 3002);
AssertH(nSelectors < 32768 && nSelectors <= (2 + (900000 / BZ_G_SIZE)), 3003);
/*--- Compute MTF values for the selectors. ---*/
{
uint8_t pos[BZ_N_GROUPS], ll_i, tmp2, tmp;
for (i = 0; i < nGroups; i++)
pos[i] = i;
for (i = 0; i < nSelectors; i++) {
ll_i = s->selector[i];
j = 0;
tmp = pos[j];
while (ll_i != tmp) {
j++;
tmp2 = tmp;
tmp = pos[j];
pos[j] = tmp2;
};
pos[0] = tmp;
s->selectorMtf[i] = j;
}
};
/*--- Assign actual codes for the tables. --*/
for (t = 0; t < nGroups; t++) {
minLen = 32;
maxLen = 0;
for (i = 0; i < alphaSize; i++) {
if (s->len[t][i] > maxLen) maxLen = s->len[t][i];
if (s->len[t][i] < minLen) minLen = s->len[t][i];
}
AssertH(!(maxLen > 17 /*20*/), 3004);
AssertH(!(minLen < 1), 3005);
BZ2_hbAssignCodes(&(s->code[t][0]), &(s->len[t][0]), minLen, maxLen, alphaSize);
}
/*--- Transmit the mapping table. ---*/
{
/* bbox: optimized a bit more than in bzip2 */
int inUse16 = 0;
for (i = 0; i < 16; i++) {
if (sizeof(long) <= 4) {
inUse16 = inUse16*2 +
((*(uint32_t*)&(s->inUse[i * 16 + 0])
| *(uint32_t*)&(s->inUse[i * 16 + 4])
| *(uint32_t*)&(s->inUse[i * 16 + 8])
| *(uint32_t*)&(s->inUse[i * 16 + 12])) != 0);
} else { /* Our CPU can do better */
inUse16 = inUse16*2 +
((*(uint64_t*)&(s->inUse[i * 16 + 0])
| *(uint64_t*)&(s->inUse[i * 16 + 8])) != 0);
}
}
nBytes = s->numZ;
bsW(s, 16, inUse16);
inUse16 <<= (sizeof(int)*8 - 16); /* move 15th bit into sign bit */
for (i = 0; i < 16; i++) {
if (inUse16 < 0) {
unsigned v16 = 0;
for (j = 0; j < 16; j++)
v16 = v16*2 + s->inUse[i * 16 + j];
bsW(s, 16, v16);
}
inUse16 <<= 1;
}
}
/*--- Now the selectors. ---*/
nBytes = s->numZ;
bsW(s, 3, nGroups);
bsW(s, 15, nSelectors);
for (i = 0; i < nSelectors; i++) {
for (j = 0; j < s->selectorMtf[i]; j++)
bsW(s, 1, 1);
bsW(s, 1, 0);
}
/*--- Now the coding tables. ---*/
nBytes = s->numZ;
for (t = 0; t < nGroups; t++) {
int32_t curr = s->len[t][0];
bsW(s, 5, curr);
for (i = 0; i < alphaSize; i++) {
while (curr < s->len[t][i]) { bsW(s, 2, 2); curr++; /* 10 */ };
while (curr > s->len[t][i]) { bsW(s, 2, 3); curr--; /* 11 */ };
bsW(s, 1, 0);
}
}
/*--- And finally, the block data proper ---*/
nBytes = s->numZ;
selCtr = 0;
gs = 0;
while (1) {
if (gs >= s->nMTF)
break;
ge = gs + BZ_G_SIZE - 1;
if (ge >= s->nMTF)
ge = s->nMTF-1;
AssertH(s->selector[selCtr] < nGroups, 3006);
/* Costs 1300 bytes and is _slower_ (on Intel Core 2) */
#if 0
if (nGroups == 6 && 50 == ge-gs+1) {
/*--- fast track the common case ---*/
uint16_t mtfv_i;
uint8_t* s_len_sel_selCtr = &(s->len[s->selector[selCtr]][0]);
int32_t* s_code_sel_selCtr = &(s->code[s->selector[selCtr]][0]);
#define BZ_ITAH(nn) \
mtfv_i = mtfv[gs+(nn)]; \
bsW(s, s_len_sel_selCtr[mtfv_i], s_code_sel_selCtr[mtfv_i])
BZ_ITAH(0); BZ_ITAH(1); BZ_ITAH(2); BZ_ITAH(3); BZ_ITAH(4);
BZ_ITAH(5); BZ_ITAH(6); BZ_ITAH(7); BZ_ITAH(8); BZ_ITAH(9);
BZ_ITAH(10); BZ_ITAH(11); BZ_ITAH(12); BZ_ITAH(13); BZ_ITAH(14);
BZ_ITAH(15); BZ_ITAH(16); BZ_ITAH(17); BZ_ITAH(18); BZ_ITAH(19);
BZ_ITAH(20); BZ_ITAH(21); BZ_ITAH(22); BZ_ITAH(23); BZ_ITAH(24);
BZ_ITAH(25); BZ_ITAH(26); BZ_ITAH(27); BZ_ITAH(28); BZ_ITAH(29);
BZ_ITAH(30); BZ_ITAH(31); BZ_ITAH(32); BZ_ITAH(33); BZ_ITAH(34);
BZ_ITAH(35); BZ_ITAH(36); BZ_ITAH(37); BZ_ITAH(38); BZ_ITAH(39);
BZ_ITAH(40); BZ_ITAH(41); BZ_ITAH(42); BZ_ITAH(43); BZ_ITAH(44);
BZ_ITAH(45); BZ_ITAH(46); BZ_ITAH(47); BZ_ITAH(48); BZ_ITAH(49);
#undef BZ_ITAH
gs = ge+1;
} else
#endif
{
/*--- slow version which correctly handles all situations ---*/
/* code is bit bigger, but moves multiply out of the loop */
uint8_t* s_len_sel_selCtr = &(s->len [s->selector[selCtr]][0]);
int32_t* s_code_sel_selCtr = &(s->code[s->selector[selCtr]][0]);
while (gs <= ge) {
bsW(s,
s_len_sel_selCtr[mtfv[gs]],
s_code_sel_selCtr[mtfv[gs]]
);
gs++;
}
/* already is: gs = ge+1; */
}
selCtr++;
}
AssertH(selCtr == nSelectors, 3007);
#undef code
#undef rfreq
#undef len_pack
}
/*---------------------------------------------------*/
static
void BZ2_compressBlock(EState* s, int is_last_block)
{
if (s->nblock > 0) {
BZ_FINALISE_CRC(s->blockCRC);
s->combinedCRC = (s->combinedCRC << 1) | (s->combinedCRC >> 31);
s->combinedCRC ^= s->blockCRC;
if (s->blockNo > 1)
s->numZ = 0;
BZ2_blockSort(s);
}
s->zbits = &((uint8_t*)s->arr2)[s->nblock];
/*-- If this is the first block, create the stream header. --*/
if (s->blockNo == 1) {
BZ2_bsInitWrite(s);
/*bsPutU8(s, BZ_HDR_B);*/
/*bsPutU8(s, BZ_HDR_Z);*/
/*bsPutU8(s, BZ_HDR_h);*/
/*bsPutU8(s, BZ_HDR_0 + s->blockSize100k);*/
bsPutU32(s, BZ_HDR_BZh0 + s->blockSize100k);
}
if (s->nblock > 0) {
/*bsPutU8(s, 0x31);*/
/*bsPutU8(s, 0x41);*/
/*bsPutU8(s, 0x59);*/
/*bsPutU8(s, 0x26);*/
bsPutU32(s, 0x31415926);
/*bsPutU8(s, 0x53);*/
/*bsPutU8(s, 0x59);*/
bsPutU16(s, 0x5359);
/*-- Now the block's CRC, so it is in a known place. --*/
bsPutU32(s, s->blockCRC);
/*
* Now a single bit indicating (non-)randomisation.
* As of version 0.9.5, we use a better sorting algorithm
* which makes randomisation unnecessary. So always set
* the randomised bit to 'no'. Of course, the decoder
* still needs to be able to handle randomised blocks
* so as to maintain backwards compatibility with
* older versions of bzip2.
*/
bsW(s, 1, 0);
bsW(s, 24, s->origPtr);
generateMTFValues(s);
sendMTFValues(s);
}
/*-- If this is the last block, add the stream trailer. --*/
if (is_last_block) {
/*bsPutU8(s, 0x17);*/
/*bsPutU8(s, 0x72);*/
/*bsPutU8(s, 0x45);*/
/*bsPutU8(s, 0x38);*/
bsPutU32(s, 0x17724538);
/*bsPutU8(s, 0x50);*/
/*bsPutU8(s, 0x90);*/
bsPutU16(s, 0x5090);
bsPutU32(s, s->combinedCRC);
bsFinishWrite(s);
}
}
/*-------------------------------------------------------------*/
/*--- end compress.c ---*/
/*-------------------------------------------------------------*/
-229
View File
@@ -1,229 +0,0 @@
/*
* bzip2 is written by Julian Seward <jseward@bzip.org>.
* Adapted for busybox by Denys Vlasenko <vda.linux@googlemail.com>.
* See README and LICENSE files in this directory for more information.
*/
/*-------------------------------------------------------------*/
/*--- Huffman coding low-level stuff ---*/
/*--- huffman.c ---*/
/*-------------------------------------------------------------*/
/* ------------------------------------------------------------------
This file is part of bzip2/libbzip2, a program and library for
lossless, block-sorting data compression.
bzip2/libbzip2 version 1.0.4 of 20 December 2006
Copyright (C) 1996-2006 Julian Seward <jseward@bzip.org>
Please read the WARNING, DISCLAIMER and PATENTS sections in the
README file.
This program is released under the terms of the license contained
in the file LICENSE.
------------------------------------------------------------------ */
/* #include "bzlib_private.h" */
/*---------------------------------------------------*/
#define WEIGHTOF(zz0) ((zz0) & 0xffffff00)
#define DEPTHOF(zz1) ((zz1) & 0x000000ff)
#define MYMAX(zz2,zz3) ((zz2) > (zz3) ? (zz2) : (zz3))
#define ADDWEIGHTS(zw1,zw2) \
(WEIGHTOF(zw1)+WEIGHTOF(zw2)) | \
(1 + MYMAX(DEPTHOF(zw1),DEPTHOF(zw2)))
#define UPHEAP(z) \
{ \
int32_t zz, tmp; \
zz = z; \
tmp = heap[zz]; \
while (weight[tmp] < weight[heap[zz >> 1]]) { \
heap[zz] = heap[zz >> 1]; \
zz >>= 1; \
} \
heap[zz] = tmp; \
}
/* 90 bytes, 0.3% of overall compress speed */
#if CONFIG_BZIP2_FEATURE_SPEED >= 1
/* macro works better than inline (gcc 4.2.1) */
#define DOWNHEAP1(heap, weight, Heap) \
{ \
int32_t zz, yy, tmp; \
zz = 1; \
tmp = heap[zz]; \
while (1) { \
yy = zz << 1; \
if (yy > nHeap) \
break; \
if (yy < nHeap \
&& weight[heap[yy+1]] < weight[heap[yy]]) \
yy++; \
if (weight[tmp] < weight[heap[yy]]) \
break; \
heap[zz] = heap[yy]; \
zz = yy; \
} \
heap[zz] = tmp; \
}
#else
static
void DOWNHEAP1(int32_t *heap, int32_t *weight, int32_t nHeap)
{
int32_t zz, yy, tmp;
zz = 1;
tmp = heap[zz];
while (1) {
yy = zz << 1;
if (yy > nHeap)
break;
if (yy < nHeap
&& weight[heap[yy + 1]] < weight[heap[yy]])
yy++;
if (weight[tmp] < weight[heap[yy]])
break;
heap[zz] = heap[yy];
zz = yy;
}
heap[zz] = tmp;
}
#endif
/*---------------------------------------------------*/
static
void BZ2_hbMakeCodeLengths(EState *s,
uint8_t *len,
int32_t *freq,
int32_t alphaSize,
int32_t maxLen)
{
/*
* Nodes and heap entries run from 1. Entry 0
* for both the heap and nodes is a sentinel.
*/
int32_t nNodes, nHeap, n1, n2, i, j, k;
Bool tooLong;
/* bbox: moved to EState to save stack
int32_t heap [BZ_MAX_ALPHA_SIZE + 2];
int32_t weight[BZ_MAX_ALPHA_SIZE * 2];
int32_t parent[BZ_MAX_ALPHA_SIZE * 2];
*/
#define heap (s->BZ2_hbMakeCodeLengths__heap)
#define weight (s->BZ2_hbMakeCodeLengths__weight)
#define parent (s->BZ2_hbMakeCodeLengths__parent)
for (i = 0; i < alphaSize; i++)
weight[i+1] = (freq[i] == 0 ? 1 : freq[i]) << 8;
while (1) {
nNodes = alphaSize;
nHeap = 0;
heap[0] = 0;
weight[0] = 0;
parent[0] = -2;
for (i = 1; i <= alphaSize; i++) {
parent[i] = -1;
nHeap++;
heap[nHeap] = i;
UPHEAP(nHeap);
}
AssertH(nHeap < (BZ_MAX_ALPHA_SIZE+2), 2001);
while (nHeap > 1) {
n1 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP1(heap, weight, nHeap);
n2 = heap[1]; heap[1] = heap[nHeap]; nHeap--; DOWNHEAP1(heap, weight, nHeap);
nNodes++;
parent[n1] = parent[n2] = nNodes;
weight[nNodes] = ADDWEIGHTS(weight[n1], weight[n2]);
parent[nNodes] = -1;
nHeap++;
heap[nHeap] = nNodes;
UPHEAP(nHeap);
}
AssertH(nNodes < (BZ_MAX_ALPHA_SIZE * 2), 2002);
tooLong = False;
for (i = 1; i <= alphaSize; i++) {
j = 0;
k = i;
while (parent[k] >= 0) {
k = parent[k];
j++;
}
len[i-1] = j;
if (j > maxLen)
tooLong = True;
}
if (!tooLong)
break;
/* 17 Oct 04: keep-going condition for the following loop used
to be 'i < alphaSize', which missed the last element,
theoretically leading to the possibility of the compressor
looping. However, this count-scaling step is only needed if
one of the generated Huffman code words is longer than
maxLen, which up to and including version 1.0.2 was 20 bits,
which is extremely unlikely. In version 1.0.3 maxLen was
changed to 17 bits, which has minimal effect on compression
ratio, but does mean this scaling step is used from time to
time, enough to verify that it works.
This means that bzip2-1.0.3 and later will only produce
Huffman codes with a maximum length of 17 bits. However, in
order to preserve backwards compatibility with bitstreams
produced by versions pre-1.0.3, the decompressor must still
handle lengths of up to 20. */
for (i = 1; i <= alphaSize; i++) {
j = weight[i] >> 8;
/* bbox: yes, it is a signed division.
* don't replace with shift! */
j = 1 + (j / 2);
weight[i] = j << 8;
}
}
#undef heap
#undef weight
#undef parent
}
/*---------------------------------------------------*/
static
void BZ2_hbAssignCodes(int32_t *code,
uint8_t *length,
int32_t minLen,
int32_t maxLen,
int32_t alphaSize)
{
int32_t n, vec, i;
vec = 0;
for (n = minLen; n <= maxLen; n++) {
for (i = 0; i < alphaSize; i++) {
if (length[i] == n) {
code[i] = vec;
vec++;
};
}
vec <<= 1;
}
}
/*-------------------------------------------------------------*/
/*--- end huffman.c ---*/
/*-------------------------------------------------------------*/
-179
View File
@@ -1,179 +0,0 @@
/*
* Copyright (C) 2007 Denys Vlasenko <vda.linux@googlemail.com>
*
* This file uses bzip2 library code which is written
* by Julian Seward <jseward@bzip.org>.
* See README and LICENSE files in bz/ directory for more information
* about bzip2 library code.
*/
#include "libbb.h"
#include "unarchive.h"
#define CONFIG_BZIP2_FEATURE_SPEED 1
/* Speed test:
* Compiled with gcc 4.2.1, run on Athlon 64 1800 MHz (512K L2 cache).
* Stock bzip2 is 26.4% slower than bbox bzip2 at SPEED 1
* (time to compress gcc-4.2.1.tar is 126.4% compared to bbox).
* At SPEED 5 difference is 32.7%.
*
* Test run of all CONFIG_BZIP2_FEATURE_SPEED values on a 11Mb text file:
* Size Time (3 runs)
* 0: 10828 4.145 4.146 4.148
* 1: 11097 3.845 3.860 3.861
* 2: 11392 3.763 3.767 3.768
* 3: 11892 3.722 3.724 3.727
* 4: 12740 3.637 3.640 3.644
* 5: 17273 3.497 3.509 3.509
*/
#define BZ_DEBUG 0
/* Takes ~300 bytes, detects corruption caused by bad RAM etc */
#define BZ_LIGHT_DEBUG 0
#include "bz/bzlib.h"
#include "bz/bzlib_private.h"
#include "bz/blocksort.c"
#include "bz/bzlib.c"
#include "bz/compress.c"
#include "bz/huffman.c"
/* No point in being shy and having very small buffer here.
* bzip2 internal buffers are much bigger anyway, hundreds of kbytes.
* If iobuf is several pages long, malloc() may use mmap,
* making iobuf is page aligned and thus (maybe) have one memcpy less
* if kernel is clever enough.
*/
enum {
IOBUF_SIZE = 8 * 1024
};
static uint8_t level;
/* NB: compressStream() has to return -1 on errors, not die.
* bbunpack() will correctly clean up in this case
* (delete incomplete .bz2 file)
*/
/* Returns:
* -1 on errors
* total written bytes so far otherwise
*/
static
IF_DESKTOP(long long) int bz_write(bz_stream *strm, void* rbuf, ssize_t rlen, void *wbuf)
{
int n, n2, ret;
strm->avail_in = rlen;
strm->next_in = rbuf;
while (1) {
strm->avail_out = IOBUF_SIZE;
strm->next_out = wbuf;
ret = BZ2_bzCompress(strm, rlen ? BZ_RUN : BZ_FINISH);
if (ret != BZ_RUN_OK /* BZ_RUNning */
&& ret != BZ_FINISH_OK /* BZ_FINISHing, but not done yet */
&& ret != BZ_STREAM_END /* BZ_FINISHed */
) {
bb_error_msg_and_die("internal error %d", ret);
}
n = IOBUF_SIZE - strm->avail_out;
if (n) {
n2 = full_write(STDOUT_FILENO, wbuf, n);
if (n2 != n) {
if (n2 >= 0)
errno = 0; /* prevent bogus error message */
bb_perror_msg(n2 >= 0 ? "short write" : bb_msg_write_error);
return -1;
}
}
if (ret == BZ_STREAM_END)
break;
if (rlen && strm->avail_in == 0)
break;
}
return 0 IF_DESKTOP( + strm->total_out );
}
static
IF_DESKTOP(long long) int FAST_FUNC compressStream(unpack_info_t *info UNUSED_PARAM)
{
IF_DESKTOP(long long) int total;
ssize_t count;
bz_stream bzs; /* it's small */
#define strm (&bzs)
char *iobuf;
#define rbuf iobuf
#define wbuf (iobuf + IOBUF_SIZE)
iobuf = xmalloc(2 * IOBUF_SIZE);
BZ2_bzCompressInit(strm, level);
while (1) {
count = full_read(STDIN_FILENO, rbuf, IOBUF_SIZE);
if (count < 0) {
bb_perror_msg(bb_msg_read_error);
total = -1;
break;
}
/* if count == 0, bz_write finalizes compression */
total = bz_write(strm, rbuf, count, wbuf);
if (count == 0 || total < 0)
break;
}
#if ENABLE_FEATURE_CLEAN_UP
BZ2_bzCompressEnd(strm);
free(iobuf);
#endif
return total;
}
int bzip2_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int bzip2_main(int argc UNUSED_PARAM, char **argv)
{
unsigned opt;
/* standard bzip2 flags
* -d --decompress force decompression
* -z --compress force compression
* -k --keep keep (don't delete) input files
* -f --force overwrite existing output files
* -t --test test compressed file integrity
* -c --stdout output to standard out
* -q --quiet suppress noncritical error messages
* -v --verbose be verbose (a 2nd -v gives more)
* -s --small use less memory (at most 2500k)
* -1 .. -9 set block size to 100k .. 900k
* --fast alias for -1
* --best alias for -9
*/
opt_complementary = "s2"; /* -s means -2 (compatibility) */
/* Must match bbunzip's constants OPT_STDOUT, OPT_FORCE! */
opt = getopt32(argv, "cfv" IF_BUNZIP2("dt") "123456789qzs");
#if ENABLE_BUNZIP2 /* bunzip2_main may not be visible... */
if (opt & 0x18) // -d and/or -t
return bunzip2_main(argc, argv);
opt >>= 5;
#else
opt >>= 3;
#endif
opt = (uint8_t)opt; /* isolate bits for -1..-8 */
opt |= 0x100; /* if nothing else, assume -9 */
level = 1;
while (!(opt & 1)) {
level++;
opt >>= 1;
}
argv += optind;
option_mask32 &= 0x7; /* ignore all except -cfv */
return bbunpack(argv, compressStream, append_ext, "bz2");
}
-432
View File
@@ -1,432 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Mini cpio implementation for busybox
*
* Copyright (C) 2001 by Glenn McGrath
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*
* Limitations:
* Doesn't check CRC's
* Only supports new ASCII and CRC formats
*
*/
#include "libbb.h"
#include "unarchive.h"
/* GNU cpio 2.9 --help (abridged):
Modes:
-t, --list List the archive
-i, --extract Extract files from an archive
-o, --create Create the archive
-p, --pass-through Copy-pass mode [was ist das?!]
Options valid in any mode:
--block-size=SIZE I/O block size = SIZE * 512 bytes
-B I/O block size = 5120 bytes
-c Use the old portable (ASCII) archive format
-C, --io-size=NUMBER I/O block size in bytes
-f, --nonmatching Only copy files that do not match given pattern
-F, --file=FILE Use FILE instead of standard input or output
-H, --format=FORMAT Use given archive FORMAT
-M, --message=STRING Print STRING when the end of a volume of the
backup media is reached
-n, --numeric-uid-gid If -v, show numeric UID and GID
--quiet Do not print the number of blocks copied
--rsh-command=COMMAND Use remote COMMAND instead of rsh
-v, --verbose Verbosely list the files processed
-V, --dot Print a "." for each file processed
-W, --warning=FLAG Control warning display: 'none','truncate','all';
multiple options accumulate
Options valid only in --extract mode:
-b, --swap Swap both halfwords of words and bytes of
halfwords in the data (equivalent to -sS)
-r, --rename Interactively rename files
-s, --swap-bytes Swap the bytes of each halfword in the files
-S, --swap-halfwords Swap the halfwords of each word (4 bytes)
--to-stdout Extract files to standard output
-E, --pattern-file=FILE Read additional patterns specifying filenames to
extract or list from FILE
--only-verify-crc Verify CRC's, don't actually extract the files
Options valid only in --create mode:
-A, --append Append to an existing archive
-O FILE File to use instead of standard output
Options valid only in --pass-through mode:
-l, --link Link files instead of copying them, when possible
Options valid in --extract and --create modes:
--absolute-filenames Do not strip file system prefix components from
the file names
--no-absolute-filenames Create all files relative to the current dir
Options valid in --create and --pass-through modes:
-0, --null A list of filenames is terminated by a NUL
-a, --reset-access-time Reset the access times of files after reading them
-I FILE File to use instead of standard input
-L, --dereference Dereference symbolic links (copy the files
that they point to instead of copying the links)
-R, --owner=[USER][:.][GROUP] Set owner of created files
Options valid in --extract and --pass-through modes:
-d, --make-directories Create leading directories where needed
-m, --preserve-modification-time Retain mtime when creating files
--no-preserve-owner Do not change the ownership of the files
--sparse Write files with blocks of zeros as sparse files
-u, --unconditional Replace all files unconditionally
*/
enum {
CPIO_OPT_EXTRACT = (1 << 0),
CPIO_OPT_TEST = (1 << 1),
CPIO_OPT_NUL_TERMINATED = (1 << 2),
CPIO_OPT_UNCONDITIONAL = (1 << 3),
CPIO_OPT_VERBOSE = (1 << 4),
CPIO_OPT_CREATE_LEADING_DIR = (1 << 5),
CPIO_OPT_PRESERVE_MTIME = (1 << 6),
CPIO_OPT_DEREF = (1 << 7),
CPIO_OPT_FILE = (1 << 8),
OPTBIT_FILE = 8,
IF_FEATURE_CPIO_O(OPTBIT_CREATE ,)
IF_FEATURE_CPIO_O(OPTBIT_FORMAT ,)
IF_FEATURE_CPIO_P(OPTBIT_PASSTHROUGH,)
IF_LONG_OPTS( OPTBIT_QUIET ,)
IF_LONG_OPTS( OPTBIT_2STDOUT ,)
CPIO_OPT_CREATE = IF_FEATURE_CPIO_O((1 << OPTBIT_CREATE )) + 0,
CPIO_OPT_FORMAT = IF_FEATURE_CPIO_O((1 << OPTBIT_FORMAT )) + 0,
CPIO_OPT_PASSTHROUGH = IF_FEATURE_CPIO_P((1 << OPTBIT_PASSTHROUGH)) + 0,
CPIO_OPT_QUIET = IF_LONG_OPTS( (1 << OPTBIT_QUIET )) + 0,
CPIO_OPT_2STDOUT = IF_LONG_OPTS( (1 << OPTBIT_2STDOUT )) + 0,
};
#define OPTION_STR "it0uvdmLF:"
#if ENABLE_FEATURE_CPIO_O
static off_t cpio_pad4(off_t size)
{
int i;
i = (- size) & 3;
size += i;
while (--i >= 0)
bb_putchar('\0');
return size;
}
/* Return value will become exit code.
* It's ok to exit instead of return. */
static NOINLINE int cpio_o(void)
{
static const char trailer[] ALIGN1 = "TRAILER!!!";
struct name_s {
struct name_s *next;
char name[1];
};
struct inodes_s {
struct inodes_s *next;
struct name_s *names;
struct stat st;
};
struct inodes_s *links = NULL;
off_t bytes = 0; /* output bytes count */
while (1) {
const char *name;
char *line;
struct stat st;
line = (option_mask32 & CPIO_OPT_NUL_TERMINATED)
? bb_get_chunk_from_file(stdin, NULL)
: xmalloc_fgetline(stdin);
if (line) {
/* Strip leading "./[./]..." from the filename */
name = line;
while (name[0] == '.' && name[1] == '/') {
while (*++name == '/')
continue;
}
if (!*name) { /* line is empty */
free(line);
continue;
}
if ((option_mask32 & CPIO_OPT_DEREF)
? stat(name, &st)
: lstat(name, &st)
) {
abort_cpio_o:
bb_simple_perror_msg_and_die(name);
}
if (!(S_ISLNK(st.st_mode) || S_ISREG(st.st_mode)))
st.st_size = 0; /* paranoia */
/* Store hardlinks for later processing, dont output them */
if (!S_ISDIR(st.st_mode) && st.st_nlink > 1) {
struct name_s *n;
struct inodes_s *l;
/* Do we have this hardlink remembered? */
l = links;
while (1) {
if (l == NULL) {
/* Not found: add new item to "links" list */
l = xzalloc(sizeof(*l));
l->st = st;
l->next = links;
links = l;
break;
}
if (l->st.st_ino == st.st_ino) {
/* found */
break;
}
l = l->next;
}
/* Add new name to "l->names" list */
n = xmalloc(sizeof(*n) + strlen(name));
strcpy(n->name, name);
n->next = l->names;
l->names = n;
free(line);
continue;
}
} else { /* line == NULL: EOF */
next_link:
if (links) {
/* Output hardlink's data */
st = links->st;
name = links->names->name;
links->names = links->names->next;
/* GNU cpio is reported to emit file data
* only for the last instance. Mimic that. */
if (links->names == NULL)
links = links->next;
else
st.st_size = 0;
/* NB: we leak links->names and/or links,
* this is intended (we exit soon anyway) */
} else {
/* If no (more) hardlinks to output,
* output "trailer" entry */
name = trailer;
/* st.st_size == 0 is a must, but for uniformity
* in the output, we zero out everything */
memset(&st, 0, sizeof(st));
/* st.st_nlink = 1; - GNU cpio does this */
}
}
bytes += printf("070701"
"%08X%08X%08X%08X%08X%08X%08X"
"%08X%08X%08X%08X" /* GNU cpio uses uppercase hex */
/* strlen+1: */ "%08X"
/* chksum: */ "00000000" /* (only for "070702" files) */
/* name,NUL: */ "%s%c",
(unsigned)(uint32_t) st.st_ino,
(unsigned)(uint32_t) st.st_mode,
(unsigned)(uint32_t) st.st_uid,
(unsigned)(uint32_t) st.st_gid,
(unsigned)(uint32_t) st.st_nlink,
(unsigned)(uint32_t) st.st_mtime,
(unsigned)(uint32_t) st.st_size,
(unsigned)(uint32_t) major(st.st_dev),
(unsigned)(uint32_t) minor(st.st_dev),
(unsigned)(uint32_t) major(st.st_rdev),
(unsigned)(uint32_t) minor(st.st_rdev),
(unsigned)(strlen(name) + 1),
name, '\0');
bytes = cpio_pad4(bytes);
if (st.st_size) {
if (S_ISLNK(st.st_mode)) {
char *lpath = xmalloc_readlink_or_warn(name);
if (!lpath)
goto abort_cpio_o;
bytes += printf("%s", lpath);
free(lpath);
} else { /* S_ISREG */
int fd = xopen(name, O_RDONLY);
fflush_all();
/* We must abort if file got shorter too! */
bb_copyfd_exact_size(fd, STDOUT_FILENO, st.st_size);
bytes += st.st_size;
close(fd);
}
bytes = cpio_pad4(bytes);
}
if (!line) {
if (name != trailer)
goto next_link;
/* TODO: GNU cpio pads trailer to 512 bytes, do we want that? */
return EXIT_SUCCESS;
}
free(line);
} /* end of "while (1)" */
}
#endif
int cpio_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int cpio_main(int argc UNUSED_PARAM, char **argv)
{
archive_handle_t *archive_handle;
char *cpio_filename;
IF_FEATURE_CPIO_O(const char *cpio_fmt = "";)
unsigned opt;
#if ENABLE_LONG_OPTS
applet_long_options =
"extract\0" No_argument "i"
"list\0" No_argument "t"
#if ENABLE_FEATURE_CPIO_O
"create\0" No_argument "o"
"format\0" Required_argument "H"
#if ENABLE_FEATURE_CPIO_P
"pass-through\0" No_argument "p"
#endif
#endif
"verbose\0" No_argument "v"
"quiet\0" No_argument "\xff"
"to-stdout\0" No_argument "\xfe"
;
#endif
archive_handle = init_handle();
/* archive_handle->src_fd = STDIN_FILENO; - done by init_handle */
archive_handle->ah_flags = ARCHIVE_EXTRACT_NEWER;
/* As of now we do not enforce this: */
/* -i,-t,-o,-p are mutually exclusive */
/* -u,-d,-m make sense only with -i or -p */
/* -L makes sense only with -o or -p */
#if !ENABLE_FEATURE_CPIO_O
/* no parameters */
opt_complementary = "=0";
opt = getopt32(argv, OPTION_STR, &cpio_filename);
argv += optind;
if (opt & CPIO_OPT_FILE) { /* -F */
xmove_fd(xopen(cpio_filename, O_RDONLY), STDIN_FILENO);
}
#else
/* _exactly_ one parameter for -p, thus <= 1 param if -p is allowed */
opt_complementary = ENABLE_FEATURE_CPIO_P ? "?1" : "=0";
opt = getopt32(argv, OPTION_STR "oH:" IF_FEATURE_CPIO_P("p"), &cpio_filename, &cpio_fmt);
argv += optind;
if ((opt & (CPIO_OPT_FILE|CPIO_OPT_CREATE)) == CPIO_OPT_FILE) { /* -F without -o */
xmove_fd(xopen(cpio_filename, O_RDONLY), STDIN_FILENO);
}
if (opt & CPIO_OPT_PASSTHROUGH) {
pid_t pid;
struct fd_pair pp;
if (argv[0] == NULL)
bb_show_usage();
if (opt & CPIO_OPT_CREATE_LEADING_DIR)
mkdir(argv[0], 0777);
/* Crude existence check:
* close(xopen(argv[0], O_RDONLY | O_DIRECTORY));
* We can also xopen, fstat, IS_DIR, later fchdir.
* This would check for existence earlier and cleaner.
* As it stands now, if we fail xchdir later,
* child dies on EPIPE, unless it caught
* a diffrerent problem earlier.
* This is good enough for now.
*/
#if !BB_MMU
pp.rd = 3;
pp.wr = 4;
if (!re_execed) {
close(3);
close(4);
xpiped_pair(pp);
}
#else
xpiped_pair(pp);
#endif
pid = fork_or_rexec(argv - optind);
if (pid == 0) { /* child */
close(pp.rd);
xmove_fd(pp.wr, STDOUT_FILENO);
goto dump;
}
/* parent */
xchdir(*argv++);
close(pp.wr);
xmove_fd(pp.rd, STDIN_FILENO);
//opt &= ~CPIO_OPT_PASSTHROUGH;
opt |= CPIO_OPT_EXTRACT;
goto skip;
}
/* -o */
if (opt & CPIO_OPT_CREATE) {
if (cpio_fmt[0] != 'n') /* we _require_ "-H newc" */
bb_show_usage();
if (opt & CPIO_OPT_FILE) {
xmove_fd(xopen3(cpio_filename, O_WRONLY | O_CREAT | O_TRUNC, 0666), STDOUT_FILENO);
}
dump:
return cpio_o();
}
skip:
#endif
/* One of either extract or test options must be given */
if ((opt & (CPIO_OPT_TEST | CPIO_OPT_EXTRACT)) == 0) {
bb_show_usage();
}
if (opt & CPIO_OPT_TEST) {
/* if both extract and test options are given, ignore extract option */
opt &= ~CPIO_OPT_EXTRACT;
archive_handle->action_header = header_list;
}
if (opt & CPIO_OPT_EXTRACT) {
archive_handle->action_data = data_extract_all;
if (opt & CPIO_OPT_2STDOUT)
archive_handle->action_data = data_extract_to_stdout;
}
if (opt & CPIO_OPT_UNCONDITIONAL) {
archive_handle->ah_flags |= ARCHIVE_UNLINK_OLD;
archive_handle->ah_flags &= ~ARCHIVE_EXTRACT_NEWER;
}
if (opt & CPIO_OPT_VERBOSE) {
if (archive_handle->action_header == header_list) {
archive_handle->action_header = header_verbose_list;
} else {
archive_handle->action_header = header_list;
}
}
if (opt & CPIO_OPT_CREATE_LEADING_DIR) {
archive_handle->ah_flags |= ARCHIVE_CREATE_LEADING_DIRS;
}
if (opt & CPIO_OPT_PRESERVE_MTIME) {
archive_handle->ah_flags |= ARCHIVE_RESTORE_DATE;
}
while (*argv) {
archive_handle->filter = filter_accept_list;
llist_add_to(&archive_handle->accept, *argv);
argv++;
}
/* see get_header_cpio */
archive_handle->cpio__blocks = (off_t)-1;
while (get_header_cpio(archive_handle) == EXIT_SUCCESS)
continue;
if (archive_handle->cpio__blocks != (off_t)-1
&& !(opt & CPIO_OPT_QUIET)
) {
fprintf(stderr, "%"OFF_FMT"u blocks\n", archive_handle->cpio__blocks);
}
return EXIT_SUCCESS;
}
-1899
View File
File diff suppressed because it is too large. Load diff
-107
View File
@@ -1,107 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* dpkg-deb packs, unpacks and provides information about Debian archives.
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
#define DPKG_DEB_OPT_CONTENTS 1
#define DPKG_DEB_OPT_CONTROL 2
#define DPKG_DEB_OPT_FIELD 4
#define DPKG_DEB_OPT_EXTRACT 8
#define DPKG_DEB_OPT_EXTRACT_VERBOSE 16
int dpkg_deb_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int dpkg_deb_main(int argc, char **argv)
{
archive_handle_t *ar_archive;
archive_handle_t *tar_archive;
llist_t *control_tar_llist = NULL;
unsigned opt;
const char *extract_dir;
int need_args;
/* Setup the tar archive handle */
tar_archive = init_handle();
/* Setup an ar archive handle that refers to the gzip sub archive */
ar_archive = init_handle();
ar_archive->dpkg__sub_archive = tar_archive;
ar_archive->filter = filter_accept_list_reassign;
#if ENABLE_FEATURE_SEAMLESS_GZ
llist_add_to(&ar_archive->accept, (char*)"data.tar.gz");
llist_add_to(&control_tar_llist, (char*)"control.tar.gz");
#endif
#if ENABLE_FEATURE_SEAMLESS_BZ2
llist_add_to(&ar_archive->accept, (char*)"data.tar.bz2");
llist_add_to(&control_tar_llist, (char*)"control.tar.bz2");
#endif
#if ENABLE_FEATURE_SEAMLESS_LZMA
llist_add_to(&ar_archive->accept, (char*)"data.tar.lzma");
llist_add_to(&control_tar_llist, (char*)"control.tar.lzma");
#endif
opt_complementary = "c--efXx:e--cfXx:f--ceXx:X--cefx:x--cefX";
opt = getopt32(argv, "cefXx");
argv += optind;
argc -= optind;
if (opt & DPKG_DEB_OPT_CONTENTS) {
tar_archive->action_header = header_verbose_list;
}
extract_dir = NULL;
need_args = 1;
if (opt & DPKG_DEB_OPT_CONTROL) {
ar_archive->accept = control_tar_llist;
tar_archive->action_data = data_extract_all;
if (1 == argc) {
extract_dir = "./DEBIAN";
} else {
need_args++;
}
}
if (opt & DPKG_DEB_OPT_FIELD) {
/* Print the entire control file
* it should accept a second argument which specifies a
* specific field to print */
ar_archive->accept = control_tar_llist;
llist_add_to(&(tar_archive->accept), (char*)"./control");
tar_archive->filter = filter_accept_list;
tar_archive->action_data = data_extract_to_stdout;
}
if (opt & DPKG_DEB_OPT_EXTRACT) {
tar_archive->action_header = header_list;
}
if (opt & (DPKG_DEB_OPT_EXTRACT_VERBOSE | DPKG_DEB_OPT_EXTRACT)) {
tar_archive->action_data = data_extract_all;
need_args = 2;
}
if (need_args != argc) {
bb_show_usage();
}
tar_archive->src_fd = ar_archive->src_fd = xopen(argv[0], O_RDONLY);
/* Work out where to extract the files */
/* 2nd argument is a dir name */
if (argv[1]) {
extract_dir = argv[1];
}
if (extract_dir) {
mkdir(extract_dir, 0777); /* bb_make_directory(extract_dir, 0777, 0) */
xchdir(extract_dir);
}
/* Do it */
unpack_ar_archive(ar_archive);
/* Cleanup */
if (ENABLE_FEATURE_CLEAN_UP)
close(ar_archive->src_fd);
return EXIT_SUCCESS;
}
-93
View File
@@ -1,93 +0,0 @@
/*
This file is part of the LZO real-time data compression library.
Copyright (C) 1996..2008 Markus Franz Xaver Johannes Oberhumer
All Rights Reserved.
Markus F.X.J. Oberhumer <markus@oberhumer.com>
http://www.oberhumer.com/opensource/lzo/
The LZO library is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
The LZO library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with the LZO library; see the file COPYING.
If not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include "liblzo_interface.h"
/* lzo-2.03/src/config1x.h */
#define M2_MIN_LEN 3
#define M2_MAX_LEN 8
#define M3_MAX_LEN 33
#define M4_MAX_LEN 9
#define M1_MAX_OFFSET 0x0400
#define M2_MAX_OFFSET 0x0800
#define M3_MAX_OFFSET 0x4000
#define M4_MAX_OFFSET 0xbfff
#define M1_MARKER 0
#define M3_MARKER 32
#define M4_MARKER 16
#define MX_MAX_OFFSET (M1_MAX_OFFSET + M2_MAX_OFFSET)
#define MIN_LOOKAHEAD (M2_MAX_LEN + 1)
#define LZO_EOF_CODE
/* lzo-2.03/src/lzo_dict.h */
#define GINDEX(m_pos,m_off,dict,dindex,in) m_pos = dict[dindex]
#define DX2(p,s1,s2) \
(((((unsigned)((p)[2]) << (s2)) ^ (p)[1]) << (s1)) ^ (p)[0])
//#define DA3(p,s1,s2,s3) ((DA2((p)+1,s2,s3) << (s1)) + (p)[0])
//#define DS3(p,s1,s2,s3) ((DS2((p)+1,s2,s3) << (s1)) - (p)[0])
#define DX3(p,s1,s2,s3) ((DX2((p)+1,s2,s3) << (s1)) ^ (p)[0])
#define D_SIZE (1U << D_BITS)
#define D_MASK ((1U << D_BITS) - 1)
#define D_HIGH ((D_MASK >> 1) + 1)
#define LZO_CHECK_MPOS_NON_DET(m_pos,m_off,in,ip,max_offset) \
( \
m_pos = ip - (unsigned)(ip - m_pos), \
((uintptr_t)m_pos < (uintptr_t)in \
|| (m_off = (unsigned)(ip - m_pos)) <= 0 \
|| m_off > max_offset) \
)
#define DENTRY(p,in) (p)
#define UPDATE_I(dict,drun,index,p,in) dict[index] = DENTRY(p,in)
#define DMS(v,s) ((unsigned) (((v) & (D_MASK >> (s))) << (s)))
#define DM(v) ((unsigned) ((v) & D_MASK))
#define DMUL(a,b) ((unsigned) ((a) * (b)))
/* lzo-2.03/src/lzo_ptr.h */
#define pd(a,b) ((unsigned)((a)-(b)))
# define TEST_IP (ip < ip_end)
# define NEED_IP(x) \
if ((unsigned)(ip_end - ip) < (unsigned)(x)) goto input_overrun
# undef TEST_OP /* don't need both of the tests here */
# define TEST_OP 1
# define NEED_OP(x) \
if ((unsigned)(op_end - op) < (unsigned)(x)) goto output_overrun
#define HAVE_ANY_OP 1
//#if defined(LZO_TEST_OVERRUN_LOOKBEHIND)
# define TEST_LB(m_pos) if (m_pos < out || m_pos >= op) goto lookbehind_overrun
//# define TEST_LBO(m_pos,o) if (m_pos < out || m_pos >= op - (o)) goto lookbehind_overrun
//#else
//# define TEST_LB(m_pos) ((void) 0)
//# define TEST_LBO(m_pos,o) ((void) 0)
//#endif
-71
View File
@@ -1,71 +0,0 @@
/*
This file is part of the LZO real-time data compression library.
Copyright (C) 1996..2008 Markus Franz Xaver Johannes Oberhumer
All Rights Reserved.
Markus F.X.J. Oberhumer <markus@oberhumer.com>
http://www.oberhumer.com/opensource/lzo/
The LZO library is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
The LZO library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with the LZO library; see the file COPYING.
If not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#define LZO1X
#undef LZO1Y
#undef assert
/*
static void die_at(int line)
{
bb_error_msg_and_die("internal error at %d", line);
}
#define assert(v) if (!(v)) die_at(__LINE__)
*/
#define assert(v) ((void)0)
int lzo1x_1_compress(const uint8_t* src, unsigned src_len,
uint8_t* dst, unsigned* dst_len,
void* wrkmem);
int lzo1x_1_15_compress(const uint8_t* src, unsigned src_len,
uint8_t* dst, unsigned* dst_len,
void* wrkmem);
int lzo1x_999_compress_level(const uint8_t* in, unsigned in_len,
uint8_t* out, unsigned* out_len,
void* wrkmem,
int compression_level);
/* decompression */
//int lzo1x_decompress(const uint8_t* src, unsigned src_len,
// uint8_t* dst, unsigned* dst_len,
// void* wrkmem /* NOT USED */);
/* safe decompression with overrun testing */
int lzo1x_decompress_safe(const uint8_t* src, unsigned src_len,
uint8_t* dst, unsigned* dst_len,
void* wrkmem /* NOT USED */);
#define LZO_E_OK 0
#define LZO_E_ERROR (-1)
#define LZO_E_OUT_OF_MEMORY (-2) /* [not used right now] */
#define LZO_E_NOT_COMPRESSIBLE (-3) /* [not used right now] */
#define LZO_E_INPUT_OVERRUN (-4)
#define LZO_E_OUTPUT_OVERRUN (-5)
#define LZO_E_LOOKBEHIND_OVERRUN (-6)
#define LZO_E_EOF_NOT_FOUND (-7)
#define LZO_E_INPUT_NOT_CONSUMED (-8)
#define LZO_E_NOT_YET_IMPLEMENTED (-9) /* [not used right now] */
/* lzo-2.03/include/lzo/lzoconf.h */
#define LZO_VERSION 0x2030
-61
View File
@@ -1,61 +0,0 @@
# Makefile for busybox
#
# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
#
# Licensed under the GPL v2 or later, see the file LICENSE in this tarball.
lib-y:=
COMMON_FILES:= \
\
data_skip.o \
data_extract_all.o \
data_extract_to_stdout.o \
\
filter_accept_all.o \
filter_accept_list.o \
filter_accept_reject_list.o \
\
header_skip.o \
header_list.o \
header_verbose_list.o \
\
seek_by_read.o \
seek_by_jump.o \
\
data_align.o \
find_list_entry.o \
init_handle.o
DPKG_FILES:= \
get_header_ar.o \
unpack_ar_archive.o \
get_header_tar.o \
filter_accept_list_reassign.o
INSERT
lib-$(CONFIG_AR) += get_header_ar.o unpack_ar_archive.o
lib-$(CONFIG_BUNZIP2) += decompress_bunzip2.o
lib-$(CONFIG_UNLZMA) += decompress_unlzma.o
lib-$(CONFIG_UNXZ) += decompress_unxz.o
lib-$(CONFIG_CPIO) += get_header_cpio.o
lib-$(CONFIG_DPKG) += $(DPKG_FILES)
lib-$(CONFIG_DPKG_DEB) += $(DPKG_FILES)
lib-$(CONFIG_GUNZIP) += decompress_unzip.o
lib-$(CONFIG_RPM2CPIO) += decompress_unzip.o get_header_cpio.o
lib-$(CONFIG_RPM) += open_transformer.o decompress_unzip.o get_header_cpio.o
lib-$(CONFIG_TAR) += get_header_tar.o
lib-$(CONFIG_UNCOMPRESS) += decompress_uncompress.o
lib-$(CONFIG_UNZIP) += decompress_unzip.o
lib-$(CONFIG_FEATURE_SEAMLESS_Z) += open_transformer.o decompress_uncompress.o
lib-$(CONFIG_FEATURE_SEAMLESS_GZ) += open_transformer.o decompress_unzip.o get_header_tar_gz.o
lib-$(CONFIG_FEATURE_SEAMLESS_BZ2) += open_transformer.o decompress_bunzip2.o get_header_tar_bz2.o
lib-$(CONFIG_FEATURE_SEAMLESS_LZMA) += open_transformer.o decompress_unlzma.o get_header_tar_lzma.o
lib-$(CONFIG_FEATURE_SEAMLESS_XZ) += open_transformer.o decompress_unxz.o
lib-$(CONFIG_FEATURE_COMPRESS_USAGE) += decompress_bunzip2.o
lib-$(CONFIG_FEATURE_TAR_TO_COMMAND) += data_extract_to_command.o
ifneq ($(lib-y),)
lib-y += $(COMMON_FILES)
endif
-15
View File
@@ -1,15 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
void FAST_FUNC data_align(archive_handle_t *archive_handle, unsigned boundary)
{
unsigned skip_amount = (boundary - (archive_handle->offset % boundary)) % boundary;
archive_handle->seek(archive_handle->src_fd, skip_amount);
archive_handle->offset += skip_amount;
}
-198
View File
@@ -1,198 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
void FAST_FUNC data_extract_all(archive_handle_t *archive_handle)
{
file_header_t *file_header = archive_handle->file_header;
int dst_fd;
int res;
#if ENABLE_FEATURE_TAR_SELINUX
char *sctx = archive_handle->tar__next_file_sctx;
if (!sctx)
sctx = archive_handle->tar__global_sctx;
if (sctx) { /* setfscreatecon is 4 syscalls, avoid if possible */
setfscreatecon(sctx);
free(archive_handle->tar__next_file_sctx);
archive_handle->tar__next_file_sctx = NULL;
}
#endif
if (archive_handle->ah_flags & ARCHIVE_CREATE_LEADING_DIRS) {
char *slash = strrchr(file_header->name, '/');
if (slash) {
*slash = '\0';
bb_make_directory(file_header->name, -1, FILEUTILS_RECUR);
*slash = '/';
}
}
if (archive_handle->ah_flags & ARCHIVE_UNLINK_OLD) {
/* Remove the entry if it exists */
if (!S_ISDIR(file_header->mode)) {
/* Is it hardlink?
* We encode hard links as regular files of size 0 with a symlink */
if (S_ISREG(file_header->mode)
&& file_header->link_target
&& file_header->size == 0
) {
/* Ugly special case:
* tar cf t.tar hardlink1 hardlink2 hardlink1
* results in this tarball structure:
* hardlink1
* hardlink2 -> hardlink1
* hardlink1 -> hardlink1 <== !!!
*/
if (strcmp(file_header->link_target, file_header->name) == 0)
goto ret;
}
/* Proceed with deleting */
if (unlink(file_header->name) == -1
&& errno != ENOENT
) {
bb_perror_msg_and_die("can't remove old file %s",
file_header->name);
}
}
}
else if (archive_handle->ah_flags & ARCHIVE_EXTRACT_NEWER) {
/* Remove the existing entry if its older than the extracted entry */
struct stat existing_sb;
if (lstat(file_header->name, &existing_sb) == -1) {
if (errno != ENOENT) {
bb_perror_msg_and_die("can't stat old file");
}
}
else if (existing_sb.st_mtime >= file_header->mtime) {
if (!(archive_handle->ah_flags & ARCHIVE_EXTRACT_QUIET)) {
bb_error_msg("%s not created: newer or "
"same age file exists", file_header->name);
}
data_skip(archive_handle);
goto ret;
}
else if ((unlink(file_header->name) == -1) && (errno != EISDIR)) {
bb_perror_msg_and_die("can't remove old file %s",
file_header->name);
}
}
/* Handle hard links separately
* We encode hard links as regular files of size 0 with a symlink */
if (S_ISREG(file_header->mode)
&& file_header->link_target
&& file_header->size == 0
) {
/* hard link */
res = link(file_header->link_target, file_header->name);
if ((res == -1) && !(archive_handle->ah_flags & ARCHIVE_EXTRACT_QUIET)) {
bb_perror_msg("can't create %slink "
"from %s to %s", "hard",
file_header->name,
file_header->link_target);
}
/* Hardlinks have no separate mode/ownership, skip chown/chmod */
goto ret;
}
/* Create the filesystem entry */
switch (file_header->mode & S_IFMT) {
case S_IFREG: {
/* Regular file */
int flags = O_WRONLY | O_CREAT | O_EXCL;
if (archive_handle->ah_flags & ARCHIVE_O_TRUNC)
flags = O_WRONLY | O_CREAT | O_TRUNC;
dst_fd = xopen3(file_header->name,
flags,
file_header->mode
);
bb_copyfd_exact_size(archive_handle->src_fd, dst_fd, file_header->size);
close(dst_fd);
break;
}
case S_IFDIR:
res = mkdir(file_header->name, file_header->mode);
if ((res == -1)
&& (errno != EISDIR) /* btw, Linux doesn't return this */
&& (errno != EEXIST)
&& !(archive_handle->ah_flags & ARCHIVE_EXTRACT_QUIET)
) {
bb_perror_msg("can't make dir %s", file_header->name);
}
break;
case S_IFLNK:
/* Symlink */
//TODO: what if file_header->link_target == NULL (say, corrupted tarball?)
res = symlink(file_header->link_target, file_header->name);
if ((res == -1)
&& !(archive_handle->ah_flags & ARCHIVE_EXTRACT_QUIET)
) {
bb_perror_msg("can't create %slink "
"from %s to %s", "sym",
file_header->name,
file_header->link_target);
}
break;
case S_IFSOCK:
case S_IFBLK:
case S_IFCHR:
case S_IFIFO:
res = mknod(file_header->name, file_header->mode, file_header->device);
if ((res == -1)
&& !(archive_handle->ah_flags & ARCHIVE_EXTRACT_QUIET)
) {
bb_perror_msg("can't create node %s", file_header->name);
}
break;
default:
bb_error_msg_and_die("unrecognized file type");
}
if (!S_ISLNK(file_header->mode)) {
if (!(archive_handle->ah_flags & ARCHIVE_DONT_RESTORE_OWNER)) {
uid_t uid = file_header->uid;
gid_t gid = file_header->gid;
#if ENABLE_FEATURE_TAR_UNAME_GNAME
if (!(archive_handle->ah_flags & ARCHIVE_NUMERIC_OWNER)) {
if (file_header->tar__uname) {
//TODO: cache last name/id pair?
struct passwd *pwd = getpwnam(file_header->tar__uname);
if (pwd) uid = pwd->pw_uid;
}
if (file_header->tar__gname) {
struct group *grp = getgrnam(file_header->tar__gname);
if (grp) gid = grp->gr_gid;
}
}
#endif
/* GNU tar 1.15.1 uses chown, not lchown */
chown(file_header->name, uid, gid);
}
/* uclibc has no lchmod, glibc is even stranger -
* it has lchmod which seems to do nothing!
* so we use chmod... */
if (!(archive_handle->ah_flags & ARCHIVE_DONT_RESTORE_PERM)) {
chmod(file_header->name, file_header->mode);
}
if (archive_handle->ah_flags & ARCHIVE_RESTORE_DATE) {
struct timeval t[2];
t[1].tv_sec = t[0].tv_sec = file_header->mtime;
t[1].tv_usec = t[0].tv_usec = 0;
utimes(file_header->name, t);
}
}
ret: ;
#if ENABLE_FEATURE_TAR_SELINUX
if (sctx) {
/* reset the context after creating an entry */
setfscreatecon(NULL);
}
#endif
}
@@ -1,134 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
enum {
//TAR_FILETYPE,
TAR_MODE,
TAR_FILENAME,
TAR_REALNAME,
#if ENABLE_FEATURE_TAR_UNAME_GNAME
TAR_UNAME,
TAR_GNAME,
#endif
TAR_SIZE,
TAR_UID,
TAR_GID,
TAR_MAX,
};
static const char *const tar_var[] = {
// "FILETYPE",
"MODE",
"FILENAME",
"REALNAME",
#if ENABLE_FEATURE_TAR_UNAME_GNAME
"UNAME",
"GNAME",
#endif
"SIZE",
"UID",
"GID",
};
static void xputenv(char *str)
{
if (putenv(str))
bb_error_msg_and_die(bb_msg_memory_exhausted);
}
static void str2env(char *env[], int idx, const char *str)
{
env[idx] = xasprintf("TAR_%s=%s", tar_var[idx], str);
xputenv(env[idx]);
}
static void dec2env(char *env[], int idx, unsigned long long val)
{
env[idx] = xasprintf("TAR_%s=%llu", tar_var[idx], val);
xputenv(env[idx]);
}
static void oct2env(char *env[], int idx, unsigned long val)
{
env[idx] = xasprintf("TAR_%s=%lo", tar_var[idx], val);
xputenv(env[idx]);
}
void FAST_FUNC data_extract_to_command(archive_handle_t *archive_handle)
{
file_header_t *file_header = archive_handle->file_header;
#if 0 /* do we need this? ENABLE_FEATURE_TAR_SELINUX */
char *sctx = archive_handle->tar__next_file_sctx;
if (!sctx)
sctx = archive_handle->tar__global_sctx;
if (sctx) { /* setfscreatecon is 4 syscalls, avoid if possible */
setfscreatecon(sctx);
free(archive_handle->tar__next_file_sctx);
archive_handle->tar__next_file_sctx = NULL;
}
#endif
if ((file_header->mode & S_IFMT) == S_IFREG) {
pid_t pid;
int p[2], status;
char *tar_env[TAR_MAX];
memset(tar_env, 0, sizeof(tar_env));
xpipe(p);
pid = BB_MMU ? xfork() : xvfork();
if (pid == 0) {
/* Child */
/* str2env(tar_env, TAR_FILETYPE, "f"); - parent should do it once */
oct2env(tar_env, TAR_MODE, file_header->mode);
str2env(tar_env, TAR_FILENAME, file_header->name);
str2env(tar_env, TAR_REALNAME, file_header->name);
#if ENABLE_FEATURE_TAR_UNAME_GNAME
str2env(tar_env, TAR_UNAME, file_header->tar__uname);
str2env(tar_env, TAR_GNAME, file_header->tar__gname);
#endif
dec2env(tar_env, TAR_SIZE, file_header->size);
dec2env(tar_env, TAR_UID, file_header->uid);
dec2env(tar_env, TAR_GID, file_header->gid);
close(p[1]);
xdup2(p[0], STDIN_FILENO);
signal(SIGPIPE, SIG_DFL);
execl(DEFAULT_SHELL, DEFAULT_SHELL_SHORT_NAME, "-c", archive_handle->tar__to_command, NULL);
bb_perror_msg_and_die("can't execute '%s'", DEFAULT_SHELL);
}
close(p[0]);
/* Our caller is expected to do signal(SIGPIPE, SIG_IGN)
* so that we don't die if child don't read all the input: */
bb_copyfd_exact_size(archive_handle->src_fd, p[1], -file_header->size);
close(p[1]);
if (safe_waitpid(pid, &status, 0) == -1)
bb_perror_msg_and_die("waitpid");
if (WIFEXITED(status) && WEXITSTATUS(status))
bb_error_msg_and_die("'%s' returned status %d",
archive_handle->tar__to_command, WEXITSTATUS(status));
if (WIFSIGNALED(status))
bb_error_msg_and_die("'%s' terminated on signal %d",
archive_handle->tar__to_command, WTERMSIG(status));
if (!BB_MMU) {
int i;
for (i = 0; i < TAR_MAX; i++) {
if (tar_env[i])
bb_unsetenv_and_free(tar_env[i]);
}
}
}
#if 0 /* ENABLE_FEATURE_TAR_SELINUX */
if (sctx)
/* reset the context after creating an entry */
setfscreatecon(NULL);
#endif
}
@@ -1,14 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
void FAST_FUNC data_extract_to_stdout(archive_handle_t *archive_handle)
{
bb_copyfd_exact_size(archive_handle->src_fd,
STDOUT_FILENO,
archive_handle->file_header->size);
}
-12
View File
@@ -1,12 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
void FAST_FUNC data_skip(archive_handle_t *archive_handle)
{
archive_handle->seek(archive_handle->src_fd, archive_handle->file_header->size);
}
-465
View File
@@ -1,465 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Small lzma deflate implementation.
* Copyright (C) 2006 Aurelien Jacobs <aurel@gnuage.org>
*
* Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
* Copyright (C) 1999-2005 Igor Pavlov
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
#if ENABLE_FEATURE_LZMA_FAST
# define speed_inline ALWAYS_INLINE
# define size_inline
#else
# define speed_inline
# define size_inline ALWAYS_INLINE
#endif
typedef struct {
int fd;
uint8_t *ptr;
/* Was keeping rc on stack in unlzma and separately allocating buffer,
* but with "buffer 'attached to' allocated rc" code is smaller: */
/* uint8_t *buffer; */
#define RC_BUFFER ((uint8_t*)(rc+1))
uint8_t *buffer_end;
/* Had provisions for variable buffer, but we don't need it here */
/* int buffer_size; */
#define RC_BUFFER_SIZE 0x10000
uint32_t code;
uint32_t range;
uint32_t bound;
} rc_t;
#define RC_TOP_BITS 24
#define RC_MOVE_BITS 5
#define RC_MODEL_TOTAL_BITS 11
/* Called twice: once at startup (LZMA_FAST only) and once in rc_normalize() */
static size_inline void rc_read(rc_t *rc)
{
int buffer_size = safe_read(rc->fd, RC_BUFFER, RC_BUFFER_SIZE);
//TODO: return -1 instead
//This will make unlzma delete broken unpacked file on unpack errors
if (buffer_size <= 0)
bb_error_msg_and_die("unexpected EOF");
rc->ptr = RC_BUFFER;
rc->buffer_end = RC_BUFFER + buffer_size;
}
/* Called twice, but one callsite is in speed_inline'd rc_is_bit_1() */
static void rc_do_normalize(rc_t *rc)
{
if (rc->ptr >= rc->buffer_end)
rc_read(rc);
rc->range <<= 8;
rc->code = (rc->code << 8) | *rc->ptr++;
}
/* Called once */
static ALWAYS_INLINE rc_t* rc_init(int fd) /*, int buffer_size) */
{
int i;
rc_t *rc;
rc = xzalloc(sizeof(*rc) + RC_BUFFER_SIZE);
rc->fd = fd;
/* rc->ptr = rc->buffer_end; */
for (i = 0; i < 5; i++) {
#if ENABLE_FEATURE_LZMA_FAST
if (rc->ptr >= rc->buffer_end)
rc_read(rc);
rc->code = (rc->code << 8) | *rc->ptr++;
#else
rc_do_normalize(rc);
#endif
}
rc->range = 0xFFFFFFFF;
return rc;
}
/* Called once */
static ALWAYS_INLINE void rc_free(rc_t *rc)
{
free(rc);
}
static ALWAYS_INLINE void rc_normalize(rc_t *rc)
{
if (rc->range < (1 << RC_TOP_BITS)) {
rc_do_normalize(rc);
}
}
/* rc_is_bit_1 is called 9 times */
static speed_inline int rc_is_bit_1(rc_t *rc, uint16_t *p)
{
rc_normalize(rc);
rc->bound = *p * (rc->range >> RC_MODEL_TOTAL_BITS);
if (rc->code < rc->bound) {
rc->range = rc->bound;
*p += ((1 << RC_MODEL_TOTAL_BITS) - *p) >> RC_MOVE_BITS;
return 0;
}
rc->range -= rc->bound;
rc->code -= rc->bound;
*p -= *p >> RC_MOVE_BITS;
return 1;
}
/* Called 4 times in unlzma loop */
static speed_inline int rc_get_bit(rc_t *rc, uint16_t *p, int *symbol)
{
int ret = rc_is_bit_1(rc, p);
*symbol = *symbol * 2 + ret;
return ret;
}
/* Called once */
static ALWAYS_INLINE int rc_direct_bit(rc_t *rc)
{
rc_normalize(rc);
rc->range >>= 1;
if (rc->code >= rc->range) {
rc->code -= rc->range;
return 1;
}
return 0;
}
/* Called twice */
static speed_inline void
rc_bit_tree_decode(rc_t *rc, uint16_t *p, int num_levels, int *symbol)
{
int i = num_levels;
*symbol = 1;
while (i--)
rc_get_bit(rc, p + *symbol, symbol);
*symbol -= 1 << num_levels;
}
typedef struct {
uint8_t pos;
uint32_t dict_size;
uint64_t dst_size;
} PACKED lzma_header_t;
/* #defines will force compiler to compute/optimize each one with each usage.
* Have heart and use enum instead. */
enum {
LZMA_BASE_SIZE = 1846,
LZMA_LIT_SIZE = 768,
LZMA_NUM_POS_BITS_MAX = 4,
LZMA_LEN_NUM_LOW_BITS = 3,
LZMA_LEN_NUM_MID_BITS = 3,
LZMA_LEN_NUM_HIGH_BITS = 8,
LZMA_LEN_CHOICE = 0,
LZMA_LEN_CHOICE_2 = (LZMA_LEN_CHOICE + 1),
LZMA_LEN_LOW = (LZMA_LEN_CHOICE_2 + 1),
LZMA_LEN_MID = (LZMA_LEN_LOW \
+ (1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_LOW_BITS))),
LZMA_LEN_HIGH = (LZMA_LEN_MID \
+ (1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_MID_BITS))),
LZMA_NUM_LEN_PROBS = (LZMA_LEN_HIGH + (1 << LZMA_LEN_NUM_HIGH_BITS)),
LZMA_NUM_STATES = 12,
LZMA_NUM_LIT_STATES = 7,
LZMA_START_POS_MODEL_INDEX = 4,
LZMA_END_POS_MODEL_INDEX = 14,
LZMA_NUM_FULL_DISTANCES = (1 << (LZMA_END_POS_MODEL_INDEX >> 1)),
LZMA_NUM_POS_SLOT_BITS = 6,
LZMA_NUM_LEN_TO_POS_STATES = 4,
LZMA_NUM_ALIGN_BITS = 4,
LZMA_MATCH_MIN_LEN = 2,
LZMA_IS_MATCH = 0,
LZMA_IS_REP = (LZMA_IS_MATCH + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX)),
LZMA_IS_REP_G0 = (LZMA_IS_REP + LZMA_NUM_STATES),
LZMA_IS_REP_G1 = (LZMA_IS_REP_G0 + LZMA_NUM_STATES),
LZMA_IS_REP_G2 = (LZMA_IS_REP_G1 + LZMA_NUM_STATES),
LZMA_IS_REP_0_LONG = (LZMA_IS_REP_G2 + LZMA_NUM_STATES),
LZMA_POS_SLOT = (LZMA_IS_REP_0_LONG \
+ (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX)),
LZMA_SPEC_POS = (LZMA_POS_SLOT \
+ (LZMA_NUM_LEN_TO_POS_STATES << LZMA_NUM_POS_SLOT_BITS)),
LZMA_ALIGN = (LZMA_SPEC_POS \
+ LZMA_NUM_FULL_DISTANCES - LZMA_END_POS_MODEL_INDEX),
LZMA_LEN_CODER = (LZMA_ALIGN + (1 << LZMA_NUM_ALIGN_BITS)),
LZMA_REP_LEN_CODER = (LZMA_LEN_CODER + LZMA_NUM_LEN_PROBS),
LZMA_LITERAL = (LZMA_REP_LEN_CODER + LZMA_NUM_LEN_PROBS),
};
IF_DESKTOP(long long) int FAST_FUNC
unpack_lzma_stream(int src_fd, int dst_fd)
{
IF_DESKTOP(long long total_written = 0;)
lzma_header_t header;
int lc, pb, lp;
uint32_t pos_state_mask;
uint32_t literal_pos_mask;
uint16_t *p;
int num_bits;
int num_probs;
rc_t *rc;
int i;
uint8_t *buffer;
uint8_t previous_byte = 0;
size_t buffer_pos = 0, global_pos = 0;
int len = 0;
int state = 0;
uint32_t rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
if (full_read(src_fd, &header, sizeof(header)) != sizeof(header)
|| header.pos >= (9 * 5 * 5)
) {
bb_error_msg("bad lzma header");
return -1;
}
i = header.pos / 9;
lc = header.pos % 9;
pb = i / 5;
lp = i % 5;
pos_state_mask = (1 << pb) - 1;
literal_pos_mask = (1 << lp) - 1;
header.dict_size = SWAP_LE32(header.dict_size);
header.dst_size = SWAP_LE64(header.dst_size);
if (header.dict_size == 0)
header.dict_size++;
buffer = xmalloc(MIN(header.dst_size, header.dict_size));
num_probs = LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp));
p = xmalloc(num_probs * sizeof(*p));
num_probs += LZMA_LITERAL - LZMA_BASE_SIZE;
for (i = 0; i < num_probs; i++)
p[i] = (1 << RC_MODEL_TOTAL_BITS) >> 1;
rc = rc_init(src_fd); /*, RC_BUFFER_SIZE); */
while (global_pos + buffer_pos < header.dst_size) {
int pos_state = (buffer_pos + global_pos) & pos_state_mask;
uint16_t *prob = p + LZMA_IS_MATCH + (state << LZMA_NUM_POS_BITS_MAX) + pos_state;
if (!rc_is_bit_1(rc, prob)) {
static const char next_state[LZMA_NUM_STATES] =
{ 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5 };
int mi = 1;
prob = (p + LZMA_LITERAL
+ (LZMA_LIT_SIZE * ((((buffer_pos + global_pos) & literal_pos_mask) << lc)
+ (previous_byte >> (8 - lc))
)
)
);
if (state >= LZMA_NUM_LIT_STATES) {
int match_byte;
uint32_t pos = buffer_pos - rep0;
while (pos >= header.dict_size)
pos += header.dict_size;
match_byte = buffer[pos];
do {
int bit;
match_byte <<= 1;
bit = match_byte & 0x100;
bit ^= (rc_get_bit(rc, prob + 0x100 + bit + mi, &mi) << 8); /* 0x100 or 0 */
if (bit)
break;
} while (mi < 0x100);
}
while (mi < 0x100) {
rc_get_bit(rc, prob + mi, &mi);
}
state = next_state[state];
previous_byte = (uint8_t) mi;
#if ENABLE_FEATURE_LZMA_FAST
one_byte1:
buffer[buffer_pos++] = previous_byte;
if (buffer_pos == header.dict_size) {
buffer_pos = 0;
global_pos += header.dict_size;
if (full_write(dst_fd, buffer, header.dict_size) != (ssize_t)header.dict_size)
goto bad;
IF_DESKTOP(total_written += header.dict_size;)
}
#else
len = 1;
goto one_byte2;
#endif
} else {
int offset;
uint16_t *prob2;
#define prob_len prob2
prob2 = p + LZMA_IS_REP + state;
if (!rc_is_bit_1(rc, prob2)) {
rep3 = rep2;
rep2 = rep1;
rep1 = rep0;
state = state < LZMA_NUM_LIT_STATES ? 0 : 3;
prob2 = p + LZMA_LEN_CODER;
} else {
prob2 += LZMA_IS_REP_G0 - LZMA_IS_REP;
if (!rc_is_bit_1(rc, prob2)) {
prob2 = (p + LZMA_IS_REP_0_LONG
+ (state << LZMA_NUM_POS_BITS_MAX)
+ pos_state
);
if (!rc_is_bit_1(rc, prob2)) {
#if ENABLE_FEATURE_LZMA_FAST
uint32_t pos = buffer_pos - rep0;
state = state < LZMA_NUM_LIT_STATES ? 9 : 11;
while (pos >= header.dict_size)
pos += header.dict_size;
previous_byte = buffer[pos];
goto one_byte1;
#else
state = state < LZMA_NUM_LIT_STATES ? 9 : 11;
len = 1;
goto string;
#endif
}
} else {
uint32_t distance;
prob2 += LZMA_IS_REP_G1 - LZMA_IS_REP_G0;
distance = rep1;
if (rc_is_bit_1(rc, prob2)) {
prob2 += LZMA_IS_REP_G2 - LZMA_IS_REP_G1;
distance = rep2;
if (rc_is_bit_1(rc, prob2)) {
distance = rep3;
rep3 = rep2;
}
rep2 = rep1;
}
rep1 = rep0;
rep0 = distance;
}
state = state < LZMA_NUM_LIT_STATES ? 8 : 11;
prob2 = p + LZMA_REP_LEN_CODER;
}
prob_len = prob2 + LZMA_LEN_CHOICE;
num_bits = LZMA_LEN_NUM_LOW_BITS;
if (!rc_is_bit_1(rc, prob_len)) {
prob_len += LZMA_LEN_LOW - LZMA_LEN_CHOICE
+ (pos_state << LZMA_LEN_NUM_LOW_BITS);
offset = 0;
} else {
prob_len += LZMA_LEN_CHOICE_2 - LZMA_LEN_CHOICE;
if (!rc_is_bit_1(rc, prob_len)) {
prob_len += LZMA_LEN_MID - LZMA_LEN_CHOICE_2
+ (pos_state << LZMA_LEN_NUM_MID_BITS);
offset = 1 << LZMA_LEN_NUM_LOW_BITS;
num_bits += LZMA_LEN_NUM_MID_BITS - LZMA_LEN_NUM_LOW_BITS;
} else {
prob_len += LZMA_LEN_HIGH - LZMA_LEN_CHOICE_2;
offset = ((1 << LZMA_LEN_NUM_LOW_BITS)
+ (1 << LZMA_LEN_NUM_MID_BITS));
num_bits += LZMA_LEN_NUM_HIGH_BITS - LZMA_LEN_NUM_LOW_BITS;
}
}
rc_bit_tree_decode(rc, prob_len, num_bits, &len);
len += offset;
if (state < 4) {
int pos_slot;
uint16_t *prob3;
state += LZMA_NUM_LIT_STATES;
prob3 = p + LZMA_POS_SLOT +
((len < LZMA_NUM_LEN_TO_POS_STATES ? len :
LZMA_NUM_LEN_TO_POS_STATES - 1)
<< LZMA_NUM_POS_SLOT_BITS);
rc_bit_tree_decode(rc, prob3,
LZMA_NUM_POS_SLOT_BITS, &pos_slot);
rep0 = pos_slot;
if (pos_slot >= LZMA_START_POS_MODEL_INDEX) {
int i2, mi2, num_bits2 = (pos_slot >> 1) - 1;
rep0 = 2 | (pos_slot & 1);
if (pos_slot < LZMA_END_POS_MODEL_INDEX) {
rep0 <<= num_bits2;
prob3 = p + LZMA_SPEC_POS + rep0 - pos_slot - 1;
} else {
for (; num_bits2 != LZMA_NUM_ALIGN_BITS; num_bits2--)
rep0 = (rep0 << 1) | rc_direct_bit(rc);
rep0 <<= LZMA_NUM_ALIGN_BITS;
prob3 = p + LZMA_ALIGN;
}
i2 = 1;
mi2 = 1;
while (num_bits2--) {
if (rc_get_bit(rc, prob3 + mi2, &mi2))
rep0 |= i2;
i2 <<= 1;
}
}
if (++rep0 == 0)
break;
}
len += LZMA_MATCH_MIN_LEN;
IF_NOT_FEATURE_LZMA_FAST(string:)
do {
uint32_t pos = buffer_pos - rep0;
while (pos >= header.dict_size)
pos += header.dict_size;
previous_byte = buffer[pos];
IF_NOT_FEATURE_LZMA_FAST(one_byte2:)
buffer[buffer_pos++] = previous_byte;
if (buffer_pos == header.dict_size) {
buffer_pos = 0;
global_pos += header.dict_size;
if (full_write(dst_fd, buffer, header.dict_size) != (ssize_t)header.dict_size)
goto bad;
IF_DESKTOP(total_written += header.dict_size;)
}
len--;
} while (len != 0 && buffer_pos < header.dst_size);
}
}
{
IF_NOT_DESKTOP(int total_written = 0; /* success */)
IF_DESKTOP(total_written += buffer_pos;)
if (full_write(dst_fd, buffer, buffer_pos) != (ssize_t)buffer_pos) {
bad:
total_written = -1; /* failure */
}
rc_free(rc);
free(p);
free(buffer);
return total_written;
}
}
-106
View File
@@ -1,106 +0,0 @@
/*
* This file uses XZ Embedded library code which is written
* by Lasse Collin <lasse.collin@tukaani.org>
* and Igor Pavlov <http://7-zip.org/>
*
* See README file in unxz/ directory for more information.
*
* This file is:
* Copyright (C) 2010 Denys Vlasenko <vda.linux@googlemail.com>
* Licensed under GPLv2, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
#define XZ_FUNC FAST_FUNC
#define XZ_EXTERN static
#define XZ_DEC_DYNALLOC
/* Skip check (rather than fail) of unsupported hash functions */
#define XZ_DEC_ANY_CHECK 1
/* We use our own crc32 function */
#define XZ_INTERNAL_CRC32 0
static uint32_t *crc32_table;
static uint32_t xz_crc32(const uint8_t *buf, size_t size, uint32_t crc)
{
crc = ~crc;
while (size != 0) {
crc = crc32_table[*buf++ ^ (crc & 0xFF)] ^ (crc >> 8);
--size;
}
return ~crc;
}
/* We use arch-optimized unaligned accessors */
#define get_unaligned_le32(buf) ({ uint32_t v; move_from_unaligned32(v, buf); SWAP_LE32(v); })
#define get_unaligned_be32(buf) ({ uint32_t v; move_from_unaligned32(v, buf); SWAP_BE32(v); })
#define put_unaligned_le32(val, buf) move_to_unaligned16(buf, SWAP_LE32(val))
#define put_unaligned_be32(val, buf) move_to_unaligned16(buf, SWAP_BE32(val))
#include "unxz/xz_dec_bcj.c"
#include "unxz/xz_dec_lzma2.c"
#include "unxz/xz_dec_stream.c"
IF_DESKTOP(long long) int FAST_FUNC
unpack_xz_stream(int src_fd, int dst_fd)
{
struct xz_buf iobuf;
struct xz_dec *state;
unsigned char *membuf;
IF_DESKTOP(long long) int total = 0;
if (!crc32_table)
crc32_table = crc32_filltable(NULL, /*endian:*/ 0);
memset(&iobuf, 0, sizeof(iobuf));
/* Preload XZ file signature */
membuf = (void*) strcpy(xmalloc(2 * BUFSIZ), HEADER_MAGIC);
iobuf.in = membuf;
iobuf.in_size = HEADER_MAGIC_SIZE;
iobuf.out = membuf + BUFSIZ;
iobuf.out_size = BUFSIZ;
/* Limit memory usage to about 64 MiB. */
state = xz_dec_init(XZ_DYNALLOC, 64*1024*1024);
while (1) {
enum xz_ret r;
if (iobuf.in_pos == iobuf.in_size) {
int rd = safe_read(src_fd, membuf, BUFSIZ);
if (rd < 0) {
bb_error_msg(bb_msg_read_error);
total = -1;
break;
}
iobuf.in_size = rd;
iobuf.in_pos = 0;
}
// bb_error_msg(">in pos:%d size:%d out pos:%d size:%d",
// iobuf.in_pos, iobuf.in_size, iobuf.out_pos, iobuf.out_size);
r = xz_dec_run(state, &iobuf);
// bb_error_msg("<in pos:%d size:%d out pos:%d size:%d r:%d",
// iobuf.in_pos, iobuf.in_size, iobuf.out_pos, iobuf.out_size, r);
if (iobuf.out_pos) {
xwrite(dst_fd, iobuf.out, iobuf.out_pos);
IF_DESKTOP(total += iobuf.out_pos;)
iobuf.out_pos = 0;
}
if (r == XZ_STREAM_END) {
break;
}
if (r != XZ_OK && r != XZ_UNSUPPORTED_CHECK) {
bb_error_msg("corrupted data");
total = -1;
break;
}
}
xz_dec_end(state);
free(membuf);
return total;
}
File diff suppressed because it is too large. Load diff
-17
View File
@@ -1,17 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Copyright (C) 2002 by Glenn McGrath
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
/* Accept any non-null name, its not really a filter at all */
char FAST_FUNC filter_accept_all(archive_handle_t *archive_handle)
{
if (archive_handle->file_header->name)
return EXIT_SUCCESS;
return EXIT_FAILURE;
}
@@ -1,19 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Copyright (C) 2002 by Glenn McGrath
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
/*
* Accept names that are in the accept list, ignoring reject list.
*/
char FAST_FUNC filter_accept_list(archive_handle_t *archive_handle)
{
if (find_list_entry(archive_handle->accept, archive_handle->file_header->name))
return EXIT_SUCCESS;
return EXIT_FAILURE;
}
@@ -1,51 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Copyright (C) 2002 by Glenn McGrath
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
/* Built and used only if ENABLE_DPKG || ENABLE_DPKG_DEB */
/*
* Reassign the subarchive metadata parser based on the filename extension
* e.g. if its a .tar.gz modify archive_handle->sub_archive to process a .tar.gz
* or if its a .tar.bz2 make archive_handle->sub_archive handle that
*/
char FAST_FUNC filter_accept_list_reassign(archive_handle_t *archive_handle)
{
/* Check the file entry is in the accept list */
if (find_list_entry(archive_handle->accept, archive_handle->file_header->name)) {
const char *name_ptr;
/* Find extension */
name_ptr = strrchr(archive_handle->file_header->name, '.');
if (!name_ptr)
return EXIT_FAILURE;
name_ptr++;
/* Modify the subarchive handler based on the extension */
if (ENABLE_FEATURE_SEAMLESS_GZ
&& strcmp(name_ptr, "gz") == 0
) {
archive_handle->dpkg__action_data_subarchive = get_header_tar_gz;
return EXIT_SUCCESS;
}
if (ENABLE_FEATURE_SEAMLESS_BZ2
&& strcmp(name_ptr, "bz2") == 0
) {
archive_handle->dpkg__action_data_subarchive = get_header_tar_bz2;
return EXIT_SUCCESS;
}
if (ENABLE_FEATURE_SEAMLESS_LZMA
&& strcmp(name_ptr, "lzma") == 0
) {
archive_handle->dpkg__action_data_subarchive = get_header_tar_lzma;
return EXIT_SUCCESS;
}
}
return EXIT_FAILURE;
}
@@ -1,36 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Copyright (C) 2002 by Glenn McGrath
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
/*
* Accept names that are in the accept list and not in the reject list
*/
char FAST_FUNC filter_accept_reject_list(archive_handle_t *archive_handle)
{
const char *key;
const llist_t *reject_entry;
const llist_t *accept_entry;
key = archive_handle->file_header->name;
/* If the key is in a reject list fail */
reject_entry = find_list_entry2(archive_handle->reject, key);
if (reject_entry) {
return EXIT_FAILURE;
}
accept_entry = find_list_entry2(archive_handle->accept, key);
/* Fail if an accept list was specified and the key wasnt in there */
if ((accept_entry == NULL) && archive_handle->accept) {
return EXIT_FAILURE;
}
/* Accepted */
return EXIT_SUCCESS;
}
-54
View File
@@ -1,54 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Copyright (C) 2002 by Glenn McGrath
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include <fnmatch.h>
#include "libbb.h"
#include "unarchive.h"
/* Find a string in a shell pattern list */
const llist_t* FAST_FUNC find_list_entry(const llist_t *list, const char *filename)
{
while (list) {
if (fnmatch(list->data, filename, 0) == 0) {
return list;
}
list = list->link;
}
return NULL;
}
/* Same, but compares only path components present in pattern
* (extra trailing path components in filename are assumed to match)
*/
const llist_t* FAST_FUNC find_list_entry2(const llist_t *list, const char *filename)
{
char buf[PATH_MAX];
int pattern_slash_cnt;
const char *c;
char *d;
while (list) {
c = list->data;
pattern_slash_cnt = 0;
while (*c)
if (*c++ == '/') pattern_slash_cnt++;
c = filename;
d = buf;
/* paranoia is better than buffer overflows */
while (*c && d != buf + sizeof(buf)-1) {
if (*c == '/' && --pattern_slash_cnt < 0)
break;
*d++ = *c++;
}
*d = '\0';
if (fnmatch(list->data, buf, 0) == 0) {
return list;
}
list = list->link;
}
return NULL;
}
-133
View File
@@ -1,133 +0,0 @@
/* vi: set sw=4 ts=4: */
/* Copyright 2001 Glenn McGrath.
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
#include "ar.h"
static unsigned read_num(const char *str, int base)
{
/* This code works because
* on misformatted numbers bb_strtou returns all-ones */
int err = bb_strtou(str, NULL, base);
if (err == -1)
bb_error_msg_and_die("invalid ar header");
return err;
}
char FAST_FUNC get_header_ar(archive_handle_t *archive_handle)
{
file_header_t *typed = archive_handle->file_header;
unsigned size;
union {
char raw[60];
struct ar_header formatted;
} ar;
#if ENABLE_FEATURE_AR_LONG_FILENAMES
static char *ar_long_names;
static unsigned ar_long_name_size;
#endif
/* dont use xread as we want to handle the error ourself */
if (read(archive_handle->src_fd, ar.raw, 60) != 60) {
/* End Of File */
return EXIT_FAILURE;
}
/* ar header starts on an even byte (2 byte aligned)
* '\n' is used for padding
*/
if (ar.raw[0] == '\n') {
/* fix up the header, we started reading 1 byte too early */
memmove(ar.raw, &ar.raw[1], 59);
ar.raw[59] = xread_char(archive_handle->src_fd);
archive_handle->offset++;
}
archive_handle->offset += 60;
if (ar.formatted.magic[0] != '`' || ar.formatted.magic[1] != '\n')
bb_error_msg_and_die("invalid ar header");
/* FIXME: more thorough routine would be in order here
* (we have something like that in tar)
* but for now we are lax. */
ar.formatted.magic[0] = '\0'; /* else 4G-2 file will have size="4294967294`\n..." */
typed->size = size = read_num(ar.formatted.size, 10);
/* special filenames have '/' as the first character */
if (ar.formatted.name[0] == '/') {
if (ar.formatted.name[1] == ' ') {
/* This is the index of symbols in the file for compilers */
data_skip(archive_handle);
archive_handle->offset += size;
return get_header_ar(archive_handle); /* Return next header */
}
#if ENABLE_FEATURE_AR_LONG_FILENAMES
if (ar.formatted.name[1] == '/') {
/* If the second char is a '/' then this entries data section
* stores long filename for multiple entries, they are stored
* in static variable long_names for use in future entries
*/
ar_long_name_size = size;
free(ar_long_names);
ar_long_names = xmalloc(size);
xread(archive_handle->src_fd, ar_long_names, size);
archive_handle->offset += size;
/* Return next header */
return get_header_ar(archive_handle);
}
#else
bb_error_msg_and_die("long filenames not supported");
#endif
}
/* Only size is always present, the rest may be missing in
* long filename pseudo file. Thus we decode the rest
* after dealing with long filename pseudo file.
*/
typed->mode = read_num(ar.formatted.mode, 8);
typed->mtime = read_num(ar.formatted.date, 10);
typed->uid = read_num(ar.formatted.uid, 10);
typed->gid = read_num(ar.formatted.gid, 10);
#if ENABLE_FEATURE_AR_LONG_FILENAMES
if (ar.formatted.name[0] == '/') {
unsigned long_offset;
/* The number after the '/' indicates the offset in the ar data section
* (saved in ar_long_names) that conatains the real filename */
long_offset = read_num(&ar.formatted.name[1], 10);
if (long_offset >= ar_long_name_size) {
bb_error_msg_and_die("can't resolve long filename");
}
typed->name = xstrdup(ar_long_names + long_offset);
} else
#endif
{
/* short filenames */
typed->name = xstrndup(ar.formatted.name, 16);
}
typed->name[strcspn(typed->name, " /")] = '\0';
if (archive_handle->filter(archive_handle) == EXIT_SUCCESS) {
archive_handle->action_header(typed);
#if ENABLE_DPKG || ENABLE_DPKG_DEB
if (archive_handle->dpkg__sub_archive) {
while (archive_handle->dpkg__action_data_subarchive(archive_handle->dpkg__sub_archive) == EXIT_SUCCESS)
continue;
} else
#endif
archive_handle->action_data(archive_handle);
} else {
data_skip(archive_handle);
}
archive_handle->offset += typed->size;
/* Set the file pointer to the correct spot, we may have been reading a compressed file */
lseek(archive_handle->src_fd, archive_handle->offset, SEEK_SET);
return EXIT_SUCCESS;
}
-186
View File
@@ -1,186 +0,0 @@
/* vi: set sw=4 ts=4: */
/* Copyright 2002 Laurence Anderson
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
typedef struct hardlinks_t {
struct hardlinks_t *next;
int inode; /* TODO: must match maj/min too! */
int mode ;
int mtime; /* These three are useful only in corner case */
int uid ; /* of hardlinks with zero size body */
int gid ;
char name[1];
} hardlinks_t;
char FAST_FUNC get_header_cpio(archive_handle_t *archive_handle)
{
file_header_t *file_header = archive_handle->file_header;
char cpio_header[110];
int namesize;
int major, minor, nlink, mode, inode;
unsigned size, uid, gid, mtime;
/* There can be padding before archive header */
data_align(archive_handle, 4);
size = full_read(archive_handle->src_fd, cpio_header, 110);
if (size == 0) {
goto create_hardlinks;
}
if (size != 110) {
bb_error_msg_and_die("short read");
}
archive_handle->offset += 110;
if (strncmp(&cpio_header[0], "07070", 5) != 0
|| (cpio_header[5] != '1' && cpio_header[5] != '2')
) {
bb_error_msg_and_die("unsupported cpio format, use newc or crc");
}
if (sscanf(cpio_header + 6,
"%8x" "%8x" "%8x" "%8x"
"%8x" "%8x" "%8x" /*maj,min:*/ "%*16c"
/*rmaj,rmin:*/"%8x" "%8x" "%8x" /*chksum: "%*8c"*/,
&inode, &mode, &uid, &gid,
&nlink, &mtime, &size,
&major, &minor, &namesize) != 10)
bb_error_msg_and_die("damaged cpio file");
file_header->mode = mode;
file_header->uid = uid;
file_header->gid = gid;
file_header->mtime = mtime;
file_header->size = size;
namesize &= 0x1fff; /* paranoia: limit names to 8k chars */
file_header->name = xzalloc(namesize + 1);
/* Read in filename */
xread(archive_handle->src_fd, file_header->name, namesize);
if (file_header->name[0] == '/') {
/* Testcase: echo /etc/hosts | cpio -pvd /tmp
* Without this code, it tries to unpack /etc/hosts
* into "/etc/hosts", not "etc/hosts".
*/
char *p = file_header->name;
do p++; while (*p == '/');
overlapping_strcpy(file_header->name, p);
}
archive_handle->offset += namesize;
/* Update offset amount and skip padding before file contents */
data_align(archive_handle, 4);
if (strcmp(file_header->name, "TRAILER!!!") == 0) {
/* Always round up. ">> 9" divides by 512 */
archive_handle->cpio__blocks = (uoff_t)(archive_handle->offset + 511) >> 9;
goto create_hardlinks;
}
file_header->link_target = NULL;
if (S_ISLNK(file_header->mode)) {
file_header->size &= 0x1fff; /* paranoia: limit names to 8k chars */
file_header->link_target = xzalloc(file_header->size + 1);
xread(archive_handle->src_fd, file_header->link_target, file_header->size);
archive_handle->offset += file_header->size;
file_header->size = 0; /* Stop possible seeks in future */
}
// TODO: data_extract_all can't deal with hardlinks to non-files...
// when fixed, change S_ISREG to !S_ISDIR here
if (nlink > 1 && S_ISREG(file_header->mode)) {
hardlinks_t *new = xmalloc(sizeof(*new) + namesize);
new->inode = inode;
new->mode = mode ;
new->mtime = mtime;
new->uid = uid ;
new->gid = gid ;
strcpy(new->name, file_header->name);
/* Put file on a linked list for later */
if (size == 0) {
new->next = archive_handle->cpio__hardlinks_to_create;
archive_handle->cpio__hardlinks_to_create = new;
return EXIT_SUCCESS; /* Skip this one */
/* TODO: this breaks cpio -t (it does not show hardlinks) */
}
new->next = archive_handle->cpio__created_hardlinks;
archive_handle->cpio__created_hardlinks = new;
}
file_header->device = makedev(major, minor);
if (archive_handle->filter(archive_handle) == EXIT_SUCCESS) {
archive_handle->action_data(archive_handle);
//TODO: run "echo /etc/hosts | cpio -pv /tmp" twice. On 2nd run:
//cpio: etc/hosts not created: newer or same age file exists
//etc/hosts <-- should NOT show it
//2 blocks <-- should say "0 blocks"
archive_handle->action_header(file_header);
} else {
data_skip(archive_handle);
}
archive_handle->offset += file_header->size;
free(file_header->link_target);
free(file_header->name);
file_header->link_target = NULL;
file_header->name = NULL;
return EXIT_SUCCESS;
create_hardlinks:
free(file_header->link_target);
free(file_header->name);
while (archive_handle->cpio__hardlinks_to_create) {
hardlinks_t *cur;
hardlinks_t *make_me = archive_handle->cpio__hardlinks_to_create;
archive_handle->cpio__hardlinks_to_create = make_me->next;
memset(file_header, 0, sizeof(*file_header));
file_header->mtime = make_me->mtime;
file_header->name = make_me->name;
file_header->mode = make_me->mode;
file_header->uid = make_me->uid;
file_header->gid = make_me->gid;
/*file_header->size = 0;*/
/*file_header->link_target = NULL;*/
/* Try to find a file we are hardlinked to */
cur = archive_handle->cpio__created_hardlinks;
while (cur) {
/* TODO: must match maj/min too! */
if (cur->inode == make_me->inode) {
file_header->link_target = cur->name;
/* link_target != NULL, size = 0: "I am a hardlink" */
if (archive_handle->filter(archive_handle) == EXIT_SUCCESS)
archive_handle->action_data(archive_handle);
free(make_me);
goto next_link;
}
cur = cur->next;
}
/* Oops... no file with such inode was created... do it now
* (happens when hardlinked files are empty (zero length)) */
if (archive_handle->filter(archive_handle) == EXIT_SUCCESS)
archive_handle->action_data(archive_handle);
/* Move to the list of created hardlinked files */
make_me->next = archive_handle->cpio__created_hardlinks;
archive_handle->cpio__created_hardlinks = make_me;
next_link: ;
}
while (archive_handle->cpio__created_hardlinks) {
hardlinks_t *p = archive_handle->cpio__created_hardlinks;
archive_handle->cpio__created_hardlinks = p->next;
free(p);
}
return EXIT_FAILURE; /* "No more files to process" */
}
-461
View File
@@ -1,461 +0,0 @@
/* vi: set sw=4 ts=4: */
/* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*
* FIXME:
* In privileged mode if uname and gname map to a uid and gid then use the
* mapped value instead of the uid/gid values in tar header
*
* References:
* GNU tar and star man pages,
* Opengroup's ustar interchange format,
* http://www.opengroup.org/onlinepubs/007904975/utilities/pax.html
*/
#include "libbb.h"
#include "unarchive.h"
typedef uint32_t aliased_uint32_t FIX_ALIASING;
typedef off_t aliased_off_t FIX_ALIASING;
/* NB: _DESTROYS_ str[len] character! */
static unsigned long long getOctal(char *str, int len)
{
unsigned long long v;
char *end;
/* NB: leading spaces are allowed. Using strtoull to handle that.
* The downside is that we accept e.g. "-123" too :(
*/
str[len] = '\0';
v = strtoull(str, &end, 8);
/* std: "Each numeric field is terminated by one or more
* <space> or NUL characters". We must support ' '! */
if (*end != '\0' && *end != ' ') {
int8_t first = str[0];
if (!(first & 0x80))
bb_error_msg_and_die("corrupted octal value in tar header");
/*
* GNU tar uses "base-256 encoding" for very large numbers.
* Encoding is binary, with highest bit always set as a marker
* and sign in next-highest bit:
* 80 00 .. 00 - zero
* bf ff .. ff - largest positive number
* ff ff .. ff - minus 1
* c0 00 .. 00 - smallest negative number
*
* Example of tar file with 8914993153 (0x213600001) byte file.
* Field starts at offset 7c:
* 00070 30 30 30 00 30 30 30 30 30 30 30 00 80 00 00 00 |000.0000000.....|
* 00080 00 00 00 02 13 60 00 01 31 31 31 32 30 33 33 36 |.....`..11120336|
*
* NB: tarballs with NEGATIVE unix times encoded that way were seen!
*/
v = first;
/* Sign-extend using 6th bit: */
v <<= sizeof(unsigned long long)*8 - 7;
v = (long long)v >> (sizeof(unsigned long long)*8 - 7);
while (--len != 0)
v = (v << 8) + (unsigned char) *str++;
}
return v;
}
#define GET_OCTAL(a) getOctal((a), sizeof(a))
#if ENABLE_FEATURE_TAR_SELINUX
/* Scan a PAX header for SELinux contexts, via "RHT.security.selinux" keyword.
* This is what Red Hat's patched version of tar uses.
*/
# define SELINUX_CONTEXT_KEYWORD "RHT.security.selinux"
static char *get_selinux_sctx_from_pax_hdr(archive_handle_t *archive_handle, unsigned sz)
{
char *buf, *p;
char *result;
p = buf = xmalloc(sz + 1);
/* prevent bb_strtou from running off the buffer */
buf[sz] = '\0';
xread(archive_handle->src_fd, buf, sz);
archive_handle->offset += sz;
result = NULL;
while (sz != 0) {
char *end, *value;
unsigned len;
/* Every record has this format: "LEN NAME=VALUE\n" */
len = bb_strtou(p, &end, 10);
/* expect errno to be EINVAL, because the character
* following the digits should be a space
*/
p += len;
sz -= len;
if ((int)sz < 0
|| len == 0
|| errno != EINVAL
|| *end != ' '
) {
bb_error_msg("malformed extended header, skipped");
// More verbose version:
//bb_error_msg("malformed extended header at %"OFF_FMT"d, skipped",
// archive_handle->offset - (sz + len));
break;
}
/* overwrite the terminating newline with NUL
* (we do not bother to check that it *was* a newline)
*/
p[-1] = '\0';
/* Is it selinux security context? */
value = end + 1;
if (strncmp(value, SELINUX_CONTEXT_KEYWORD"=", sizeof(SELINUX_CONTEXT_KEYWORD"=") - 1) == 0) {
value += sizeof(SELINUX_CONTEXT_KEYWORD"=") - 1;
result = xstrdup(value);
break;
}
}
free(buf);
return result;
}
#endif
char FAST_FUNC get_header_tar(archive_handle_t *archive_handle)
{
file_header_t *file_header = archive_handle->file_header;
struct tar_header_t tar;
char *cp;
int i, sum_u, sum;
#if ENABLE_FEATURE_TAR_OLDSUN_COMPATIBILITY
int sum_s;
#endif
int parse_names;
/* Our "private data" */
#if ENABLE_FEATURE_TAR_GNU_EXTENSIONS
# define p_longname (archive_handle->tar__longname)
# define p_linkname (archive_handle->tar__linkname)
#else
# define p_longname 0
# define p_linkname 0
#endif
#if ENABLE_FEATURE_TAR_GNU_EXTENSIONS || ENABLE_FEATURE_TAR_SELINUX
again:
#endif
/* Align header */
data_align(archive_handle, 512);
again_after_align:
#if ENABLE_DESKTOP || ENABLE_FEATURE_TAR_AUTODETECT
/* to prevent misdetection of bz2 sig */
*(aliased_uint32_t*)&tar = 0;
i = full_read(archive_handle->src_fd, &tar, 512);
/* If GNU tar sees EOF in above read, it says:
* "tar: A lone zero block at N", where N = kilobyte
* where EOF was met (not EOF block, actual EOF!),
* and exits with EXIT_SUCCESS.
* We will mimic exit(EXIT_SUCCESS), although we will not mimic
* the message and we don't check whether we indeed
* saw zero block directly before this. */
if (i == 0) {
xfunc_error_retval = 0;
short_read:
bb_error_msg_and_die("short read");
}
if (i != 512) {
IF_FEATURE_TAR_AUTODETECT(goto autodetect;)
goto short_read;
}
#else
i = 512;
xread(archive_handle->src_fd, &tar, i);
#endif
archive_handle->offset += i;
/* If there is no filename its an empty header */
if (tar.name[0] == 0 && tar.prefix[0] == 0) {
if (archive_handle->tar__end) {
/* Second consecutive empty header - end of archive.
* Read until the end to empty the pipe from gz or bz2
*/
while (full_read(archive_handle->src_fd, &tar, 512) == 512)
continue;
return EXIT_FAILURE;
}
archive_handle->tar__end = 1;
return EXIT_SUCCESS;
}
archive_handle->tar__end = 0;
/* Check header has valid magic, "ustar" is for the proper tar,
* five NULs are for the old tar format */
if (strncmp(tar.magic, "ustar", 5) != 0
&& (!ENABLE_FEATURE_TAR_OLDGNU_COMPATIBILITY
|| memcmp(tar.magic, "\0\0\0\0", 5) != 0)
) {
#if ENABLE_FEATURE_TAR_AUTODETECT
char FAST_FUNC (*get_header_ptr)(archive_handle_t *);
uint16_t magic2;
autodetect:
magic2 = *(uint16_t*)tar.name;
/* tar gz/bz autodetect: check for gz/bz2 magic.
* If we see the magic, and it is the very first block,
* we can switch to get_header_tar_gz/bz2/lzma().
* Needs seekable fd. I wish recv(MSG_PEEK) works
* on any fd... */
# if ENABLE_FEATURE_SEAMLESS_GZ
if (magic2 == GZIP_MAGIC) {
get_header_ptr = get_header_tar_gz;
} else
# endif
# if ENABLE_FEATURE_SEAMLESS_BZ2
if (magic2 == BZIP2_MAGIC
&& tar.name[2] == 'h' && isdigit(tar.name[3])
) { /* bzip2 */
get_header_ptr = get_header_tar_bz2;
} else
# endif
# if ENABLE_FEATURE_SEAMLESS_XZ
//TODO: if (magic2 == XZ_MAGIC1)...
//else
# endif
goto err;
/* Two different causes for lseek() != 0:
* unseekable fd (would like to support that too, but...),
* or not first block (false positive, it's not .gz/.bz2!) */
if (lseek(archive_handle->src_fd, -i, SEEK_CUR) != 0)
goto err;
while (get_header_ptr(archive_handle) == EXIT_SUCCESS)
continue;
return EXIT_FAILURE;
err:
#endif /* FEATURE_TAR_AUTODETECT */
bb_error_msg_and_die("invalid tar magic");
}
/* Do checksum on headers.
* POSIX says that checksum is done on unsigned bytes, but
* Sun and HP-UX gets it wrong... more details in
* GNU tar source. */
#if ENABLE_FEATURE_TAR_OLDSUN_COMPATIBILITY
sum_s = ' ' * sizeof(tar.chksum);
#endif
sum_u = ' ' * sizeof(tar.chksum);
for (i = 0; i < 148; i++) {
sum_u += ((unsigned char*)&tar)[i];
#if ENABLE_FEATURE_TAR_OLDSUN_COMPATIBILITY
sum_s += ((signed char*)&tar)[i];
#endif
}
for (i = 156; i < 512; i++) {
sum_u += ((unsigned char*)&tar)[i];
#if ENABLE_FEATURE_TAR_OLDSUN_COMPATIBILITY
sum_s += ((signed char*)&tar)[i];
#endif
}
/* This field does not need special treatment (getOctal) */
{
char *endp; /* gcc likes temp var for &endp */
sum = strtoul(tar.chksum, &endp, 8);
if ((*endp != '\0' && *endp != ' ')
|| (sum_u != sum IF_FEATURE_TAR_OLDSUN_COMPATIBILITY(&& sum_s != sum))
) {
bb_error_msg_and_die("invalid tar header checksum");
}
}
/* don't use xstrtoul, tar.chksum may have leading spaces */
sum = strtoul(tar.chksum, NULL, 8);
if (sum_u != sum IF_FEATURE_TAR_OLDSUN_COMPATIBILITY(&& sum_s != sum)) {
bb_error_msg_and_die("invalid tar header checksum");
}
/* 0 is reserved for high perf file, treat as normal file */
if (!tar.typeflag) tar.typeflag = '0';
parse_names = (tar.typeflag >= '0' && tar.typeflag <= '7');
/* getOctal trashes subsequent field, therefore we call it
* on fields in reverse order */
if (tar.devmajor[0]) {
char t = tar.prefix[0];
/* we trash prefix[0] here, but we DO need it later! */
unsigned minor = GET_OCTAL(tar.devminor);
unsigned major = GET_OCTAL(tar.devmajor);
file_header->device = makedev(major, minor);
tar.prefix[0] = t;
}
file_header->link_target = NULL;
if (!p_linkname && parse_names && tar.linkname[0]) {
file_header->link_target = xstrndup(tar.linkname, sizeof(tar.linkname));
/* FIXME: what if we have non-link object with link_target? */
/* Will link_target be free()ed? */
}
#if ENABLE_FEATURE_TAR_UNAME_GNAME
file_header->tar__uname = tar.uname[0] ? xstrndup(tar.uname, sizeof(tar.uname)) : NULL;
file_header->tar__gname = tar.gname[0] ? xstrndup(tar.gname, sizeof(tar.gname)) : NULL;
#endif
file_header->mtime = GET_OCTAL(tar.mtime);
file_header->size = GET_OCTAL(tar.size);
file_header->gid = GET_OCTAL(tar.gid);
file_header->uid = GET_OCTAL(tar.uid);
/* Set bits 0-11 of the files mode */
file_header->mode = 07777 & GET_OCTAL(tar.mode);
file_header->name = NULL;
if (!p_longname && parse_names) {
/* we trash mode[0] here, it's ok */
//tar.name[sizeof(tar.name)] = '\0'; - gcc 4.3.0 would complain
tar.mode[0] = '\0';
if (tar.prefix[0]) {
/* and padding[0] */
//tar.prefix[sizeof(tar.prefix)] = '\0'; - gcc 4.3.0 would complain
tar.padding[0] = '\0';
file_header->name = concat_path_file(tar.prefix, tar.name);
} else
file_header->name = xstrdup(tar.name);
}
/* Set bits 12-15 of the files mode */
/* (typeflag was not trashed because chksum does not use getOctal) */
switch (tar.typeflag) {
/* busybox identifies hard links as being regular files with 0 size and a link name */
case '1':
file_header->mode |= S_IFREG;
break;
case '7':
/* case 0: */
case '0':
#if ENABLE_FEATURE_TAR_OLDGNU_COMPATIBILITY
if (last_char_is(file_header->name, '/')) {
goto set_dir;
}
#endif
file_header->mode |= S_IFREG;
break;
case '2':
file_header->mode |= S_IFLNK;
/* have seen tarballs with size field containing
* the size of the link target's name */
size0:
file_header->size = 0;
break;
case '3':
file_header->mode |= S_IFCHR;
goto size0; /* paranoia */
case '4':
file_header->mode |= S_IFBLK;
goto size0;
case '5':
IF_FEATURE_TAR_OLDGNU_COMPATIBILITY(set_dir:)
file_header->mode |= S_IFDIR;
goto size0;
case '6':
file_header->mode |= S_IFIFO;
goto size0;
#if ENABLE_FEATURE_TAR_GNU_EXTENSIONS
case 'L':
/* free: paranoia: tar with several consecutive longnames */
free(p_longname);
/* For paranoia reasons we allocate extra NUL char */
p_longname = xzalloc(file_header->size + 1);
/* We read ASCIZ string, including NUL */
xread(archive_handle->src_fd, p_longname, file_header->size);
archive_handle->offset += file_header->size;
/* return get_header_tar(archive_handle); */
/* gcc 4.1.1 didn't optimize it into jump */
/* so we will do it ourself, this also saves stack */
goto again;
case 'K':
free(p_linkname);
p_linkname = xzalloc(file_header->size + 1);
xread(archive_handle->src_fd, p_linkname, file_header->size);
archive_handle->offset += file_header->size;
/* return get_header_tar(archive_handle); */
goto again;
case 'D': /* GNU dump dir */
case 'M': /* Continuation of multi volume archive */
case 'N': /* Old GNU for names > 100 characters */
case 'S': /* Sparse file */
case 'V': /* Volume header */
#endif
#if !ENABLE_FEATURE_TAR_SELINUX
case 'g': /* pax global header */
case 'x': /* pax extended header */
#else
skip_ext_hdr:
#endif
{
off_t sz;
bb_error_msg("warning: skipping header '%c'", tar.typeflag);
sz = (file_header->size + 511) & ~(off_t)511;
archive_handle->offset += sz;
sz >>= 9; /* sz /= 512 but w/o contortions for signed div */
while (sz--)
xread(archive_handle->src_fd, &tar, 512);
/* return get_header_tar(archive_handle); */
goto again_after_align;
}
#if ENABLE_FEATURE_TAR_SELINUX
case 'g': /* pax global header */
case 'x': { /* pax extended header */
char **pp;
if ((uoff_t)file_header->size > 0xfffff) /* paranoia */
goto skip_ext_hdr;
pp = (tar.typeflag == 'g') ? &archive_handle->tar__global_sctx : &archive_handle->tar__next_file_sctx;
free(*pp);
*pp = get_selinux_sctx_from_pax_hdr(archive_handle, file_header->size);
goto again;
}
#endif
default:
bb_error_msg_and_die("unknown typeflag: 0x%x", tar.typeflag);
}
#if ENABLE_FEATURE_TAR_GNU_EXTENSIONS
if (p_longname) {
file_header->name = p_longname;
p_longname = NULL;
}
if (p_linkname) {
file_header->link_target = p_linkname;
p_linkname = NULL;
}
#endif
if (strncmp(file_header->name, "/../"+1, 3) == 0
|| strstr(file_header->name, "/../")
) {
bb_error_msg_and_die("name with '..' encountered: '%s'",
file_header->name);
}
/* Strip trailing '/' in directories */
/* Must be done after mode is set as '/' is used to check if it's a directory */
cp = last_char_is(file_header->name, '/');
if (archive_handle->filter(archive_handle) == EXIT_SUCCESS) {
archive_handle->action_header(/*archive_handle->*/ file_header);
/* Note that we kill the '/' only after action_header() */
/* (like GNU tar 1.15.1: verbose mode outputs "dir/dir/") */
if (cp)
*cp = '\0';
archive_handle->action_data(archive_handle);
if (archive_handle->accept || archive_handle->reject)
llist_add_to(&archive_handle->passed, file_header->name);
else /* Caller isn't interested in list of unpacked files */
free(file_header->name);
} else {
data_skip(archive_handle);
free(file_header->name);
}
archive_handle->offset += file_header->size;
free(file_header->link_target);
/* Do not free(file_header->name)!
* It might be inserted in archive_handle->passed - see above */
#if ENABLE_FEATURE_TAR_UNAME_GNAME
free(file_header->tar__uname);
free(file_header->tar__gname);
#endif
return EXIT_SUCCESS;
}
@@ -1,21 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
char FAST_FUNC get_header_tar_bz2(archive_handle_t *archive_handle)
{
/* Can't lseek over pipes */
archive_handle->seek = seek_by_read;
open_transformer(archive_handle->src_fd, unpack_bz2_stream_prime, "bunzip2");
archive_handle->offset = 0;
while (get_header_tar(archive_handle) == EXIT_SUCCESS)
continue;
/* Can only do one file at a time */
return EXIT_FAILURE;
}
-36
View File
@@ -1,36 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
char FAST_FUNC get_header_tar_gz(archive_handle_t *archive_handle)
{
#if BB_MMU
unsigned char magic[2];
#endif
/* Can't lseek over pipes */
archive_handle->seek = seek_by_read;
/* Check gzip magic only if open_transformer will invoke unpack_gz_stream (MMU case).
* Otherwise, it will invoke an external helper "gunzip -cf" (NOMMU case) which will
* need the header. */
#if BB_MMU
xread(archive_handle->src_fd, &magic, 2);
/* Can skip this check, but error message will be less clear */
if ((magic[0] != 0x1f) || (magic[1] != 0x8b)) {
bb_error_msg_and_die("invalid gzip magic");
}
#endif
open_transformer(archive_handle->src_fd, unpack_gz_stream, "gunzip");
archive_handle->offset = 0;
while (get_header_tar(archive_handle) == EXIT_SUCCESS)
continue;
/* Can only do one file at a time */
return EXIT_FAILURE;
}
@@ -1,24 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Small lzma deflate implementation.
* Copyright (C) 2006 Aurelien Jacobs <aurel@gnuage.org>
*
* Licensed under GPL v2, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
char FAST_FUNC get_header_tar_lzma(archive_handle_t *archive_handle)
{
/* Can't lseek over pipes */
archive_handle->seek = seek_by_read;
open_transformer(archive_handle->src_fd, unpack_lzma_stream, "unlzma");
archive_handle->offset = 0;
while (get_header_tar(archive_handle) == EXIT_SUCCESS)
continue;
/* Can only do one file at a time */
return EXIT_FAILURE;
}
-12
View File
@@ -1,12 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
void FAST_FUNC header_list(const file_header_t *file_header)
{
//TODO: cpio -vp DIR should output "DIR/NAME", not just "NAME" */
puts(file_header->name);
}
-10
View File
@@ -1,10 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
void FAST_FUNC header_skip(const file_header_t *file_header UNUSED_PARAM)
{
}
@@ -1,69 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
void FAST_FUNC header_verbose_list(const file_header_t *file_header)
{
struct tm tm_time;
struct tm *ptm = &tm_time; //localtime(&file_header->mtime);
#if ENABLE_FEATURE_TAR_UNAME_GNAME
char uid[sizeof(int)*3 + 2];
/*char gid[sizeof(int)*3 + 2];*/
char *user;
char *group;
localtime_r(&file_header->mtime, ptm);
user = file_header->tar__uname;
if (user == NULL) {
sprintf(uid, "%u", (unsigned)file_header->uid);
user = uid;
}
group = file_header->tar__gname;
if (group == NULL) {
/*sprintf(gid, "%u", (unsigned)file_header->gid);*/
group = utoa(file_header->gid);
}
printf("%s %s/%s %9"OFF_FMT"u %4u-%02u-%02u %02u:%02u:%02u %s",
bb_mode_string(file_header->mode),
user,
group,
file_header->size,
1900 + ptm->tm_year,
1 + ptm->tm_mon,
ptm->tm_mday,
ptm->tm_hour,
ptm->tm_min,
ptm->tm_sec,
file_header->name);
#else /* !FEATURE_TAR_UNAME_GNAME */
localtime_r(&file_header->mtime, ptm);
printf("%s %u/%u %9"OFF_FMT"u %4u-%02u-%02u %02u:%02u:%02u %s",
bb_mode_string(file_header->mode),
(unsigned)file_header->uid,
(unsigned)file_header->gid,
file_header->size,
1900 + ptm->tm_year,
1 + ptm->tm_mon,
ptm->tm_mday,
ptm->tm_hour,
ptm->tm_min,
ptm->tm_sec,
file_header->name);
#endif /* FEATURE_TAR_UNAME_GNAME */
/* NB: GNU tar shows "->" for symlinks and "link to" for hardlinks */
if (file_header->link_target) {
printf(" -> %s", file_header->link_target);
}
bb_putchar('\n');
}
-22
View File
@@ -1,22 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
archive_handle_t* FAST_FUNC init_handle(void)
{
archive_handle_t *archive_handle;
/* Initialize default values */
archive_handle = xzalloc(sizeof(archive_handle_t));
archive_handle->file_header = xzalloc(sizeof(file_header_t));
archive_handle->action_header = header_skip;
archive_handle->action_data = data_skip;
archive_handle->filter = filter_accept_all;
archive_handle->seek = seek_by_jump;
return archive_handle;
}
-54
View File
@@ -1,54 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
/* transformer(), more than meets the eye */
/*
* On MMU machine, the transform_prog is removed by macro magic
* in include/unarchive.h. On NOMMU, transformer is removed.
*/
void FAST_FUNC open_transformer(int fd,
IF_DESKTOP(long long) int FAST_FUNC (*transformer)(int src_fd, int dst_fd),
const char *transform_prog)
{
struct fd_pair fd_pipe;
int pid;
xpiped_pair(fd_pipe);
pid = BB_MMU ? xfork() : xvfork();
if (pid == 0) {
/* Child */
close(fd_pipe.rd); /* we don't want to read from the parent */
// FIXME: error check?
#if BB_MMU
transformer(fd, fd_pipe.wr);
if (ENABLE_FEATURE_CLEAN_UP) {
close(fd_pipe.wr); /* send EOF */
close(fd);
}
/* must be _exit! bug was actually seen here */
_exit(EXIT_SUCCESS);
#else
{
char *argv[4];
xmove_fd(fd, 0);
xmove_fd(fd_pipe.wr, 1);
argv[0] = (char*)transform_prog;
argv[1] = (char*)"-cf";
argv[2] = (char*)"-";
argv[3] = NULL;
BB_EXECVP(transform_prog, argv);
bb_perror_msg_and_die("can't execute '%s'", transform_prog);
}
#endif
/* notreached */
}
/* parent process */
close(fd_pipe.wr); /* don't want to write to the child */
xmove_fd(fd_pipe.rd, fd);
}
-19
View File
@@ -1,19 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
void FAST_FUNC seek_by_jump(int fd, off_t amount)
{
if (amount
&& lseek(fd, amount, SEEK_CUR) == (off_t) -1
) {
if (errno == ESPIPE)
seek_by_read(fd, amount);
else
bb_perror_msg_and_die("seek failure");
}
}
-16
View File
@@ -1,16 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
/* If we are reading through a pipe, or from stdin then we can't lseek,
* we must read and discard the data to skip over it.
*/
void FAST_FUNC seek_by_read(int fd, off_t amount)
{
if (amount)
bb_copyfd_exact_size(fd, -1, amount);
}
-22
View File
@@ -1,22 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
#include "ar.h"
void FAST_FUNC unpack_ar_archive(archive_handle_t *ar_archive)
{
char magic[7];
xread(ar_archive->src_fd, magic, AR_MAGIC_LEN);
if (strncmp(magic, AR_MAGIC, AR_MAGIC_LEN) != 0) {
bb_error_msg_and_die("invalid ar magic");
}
ar_archive->offset += AR_MAGIC_LEN;
while (get_header_ar(ar_archive) == EXIT_SUCCESS)
continue;
}
-136
View File
@@ -1,136 +0,0 @@
XZ Embedded
===========
XZ Embedded is a relatively small, limited implementation of the .xz
file format. Currently only decoding is implemented.
XZ Embedded was written for use in the Linux kernel, but the code can
be easily used in other environments too, including regular userspace
applications.
This README contains information that is useful only when the copy
of XZ Embedded isn't part of the Linux kernel tree. You should also
read linux/Documentation/xz.txt even if you aren't using XZ Embedded
as part of Linux; information in that file is not repeated in this
README.
Compiling the Linux kernel module
The xz_dec module depends on crc32 module, so make sure that you have
it enabled (CONFIG_CRC32).
Building the xz_dec and xz_dec_test modules without support for BCJ
filters:
cd linux/lib/xz
make -C /path/to/kernel/source \
KCPPFLAGS=-I"$(pwd)/../../include" M="$(pwd)" \
CONFIG_XZ_DEC=m CONFIG_XZ_DEC_TEST=m
Building the xz_dec and xz_dec_test modules with support for BCJ
filters:
cd linux/lib/xz
make -C /path/to/kernel/source \
KCPPFLAGS=-I"$(pwd)/../../include" M="$(pwd)" \
CONFIG_XZ_DEC=m CONFIG_XZ_DEC_TEST=m CONFIG_XZ_DEC_BCJ=y \
CONFIG_XZ_DEC_X86=y CONFIG_XZ_DEC_POWERPC=y \
CONFIG_XZ_DEC_IA64=y CONFIG_XZ_DEC_ARM=y \
CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_SPARC=y
If you want only one or a few of the BCJ filters, omit the appropriate
variables. CONFIG_XZ_DEC_BCJ=y is always required to build the support
code shared between all BCJ filters.
Most people don't need the xz_dec_test module. You can skip building
it by omitting CONFIG_XZ_DEC_TEST=m from the make command line.
Compiler requirements
XZ Embedded should compile as either GNU-C89 (used in the Linux
kernel) or with any C99 compiler. Getting the code to compile with
non-GNU C89 compiler or a C++ compiler should be quite easy as
long as there is a data type for unsigned 64-bit integer (or the
code is modified not to support large files, which needs some more
care than just using 32-bit integer instead of 64-bit).
If you use GCC, try to use a recent version. For example, on x86,
xz_dec_lzma2.c compiled with GCC 3.3.6 is 15-25 % slower than when
compiled with GCC 4.3.3.
Embedding into userspace applications
To embed the XZ decoder, copy the following files into a single
directory in your source code tree:
linux/include/linux/xz.h
linux/lib/xz/xz_crc32.c
linux/lib/xz/xz_dec_lzma2.c
linux/lib/xz/xz_dec_stream.c
linux/lib/xz/xz_lzma2.h
linux/lib/xz/xz_private.h
linux/lib/xz/xz_stream.h
userspace/xz_config.h
Alternatively, xz.h may be placed into a different directory but then
that directory must be in the compiler include path when compiling
the .c files.
Your code should use only the functions declared in xz.h. The rest of
the .h files are meant only for internal use in XZ Embedded.
You may want to modify xz_config.h to be more suitable for your build
environment. Probably you should at least skim through it even if the
default file works as is.
BCJ filter support
If you want support for one or more BCJ filters, you need to copy also
linux/lib/xz/xz_dec_bcj.c into your application, and use appropriate
#defines in xz_config.h or in compiler flags. You don't need these
#defines in the code that just uses XZ Embedded via xz.h, but having
them always #defined doesn't hurt either.
#define Instruction set BCJ filter endianness
XZ_DEC_X86 x86 or x86-64 Little endian only
XZ_DEC_POWERPC PowerPC Big endian only
XZ_DEC_IA64 Itanium (IA-64) Big or little endian
XZ_DEC_ARM ARM Little endian only
XZ_DEC_ARMTHUMB ARM-Thumb Little endian only
XZ_DEC_SPARC SPARC Big or little endian
While some architectures are (partially) bi-endian, the endianness
setting doesn't change the endianness of the instructions on all
architectures. That's why Itanium and SPARC filters work for both big
and little endian executables (Itanium has little endian instructions
and SPARC has big endian instructions).
There currently is no filter for little endian PowerPC or big endian
ARM or ARM-Thumb. Implementing filters for them can be considered if
there is a need for such filters in real-world applications.
Notes about shared libraries
If you are including XZ Embedded into a shared library, you very
probably should rename the xz_* functions to prevent symbol
conflicts in case your library is linked against some other library
or application that also has XZ Embedded in it (which may even be
a different version of XZ Embedded). TODO: Provide an easy way
to do this.
Please don't create a shared library of XZ Embedded itself unless
it is fine to rebuild everything depending on that shared library
everytime you upgrade to a newer version of XZ Embedded. There are
no API or ABI stability guarantees between different versions of
XZ Embedded.
Specifying the calling convention
XZ_FUNC macro was included to support declaring functions with __init
in Linux. Outside Linux, it can be used to specify the calling
convention on systems that support multiple calling conventions.
For example, on Windows, you may make all functions use the stdcall
calling convention by defining XZ_FUNC=__stdcall when building and
using the functions from XZ Embedded.
-271
View File
@@ -1,271 +0,0 @@
/*
* XZ decompressor
*
* Authors: Lasse Collin <lasse.collin@tukaani.org>
* Igor Pavlov <http://7-zip.org/>
*
* This file has been put into the public domain.
* You can do whatever you want with this file.
*/
#ifndef XZ_H
#define XZ_H
#ifdef __KERNEL__
# include <linux/stddef.h>
# include <linux/types.h>
#else
# include <stddef.h>
# include <stdint.h>
#endif
/* In Linux, this is used to make extern functions static when needed. */
#ifndef XZ_EXTERN
# define XZ_EXTERN extern
#endif
/* In Linux, this is used to mark the functions with __init when needed. */
#ifndef XZ_FUNC
# define XZ_FUNC
#endif
/**
* enum xz_mode - Operation mode
*
* @XZ_SINGLE: Single-call mode. This uses less RAM than
* than multi-call modes, because the LZMA2
* dictionary doesn't need to be allocated as
* part of the decoder state. All required data
* structures are allocated at initialization,
* so xz_dec_run() cannot return XZ_MEM_ERROR.
* @XZ_PREALLOC: Multi-call mode with preallocated LZMA2
* dictionary buffer. All data structures are
* allocated at initialization, so xz_dec_run()
* cannot return XZ_MEM_ERROR.
* @XZ_DYNALLOC: Multi-call mode. The LZMA2 dictionary is
* allocated once the required size has been
* parsed from the stream headers. If the
* allocation fails, xz_dec_run() will return
* XZ_MEM_ERROR.
*
* It is possible to enable support only for a subset of the above
* modes at compile time by defining XZ_DEC_SINGLE, XZ_DEC_PREALLOC,
* or XZ_DEC_DYNALLOC. The xz_dec kernel module is always compiled
* with support for all operation modes, but the preboot code may
* be built with fewer features to minimize code size.
*/
enum xz_mode {
XZ_SINGLE,
XZ_PREALLOC,
XZ_DYNALLOC
};
/**
* enum xz_ret - Return codes
* @XZ_OK: Everything is OK so far. More input or more
* output space is required to continue. This
* return code is possible only in multi-call mode
* (XZ_PREALLOC or XZ_DYNALLOC).
* @XZ_STREAM_END: Operation finished successfully.
* @XZ_UNSUPPORTED_CHECK: Integrity check type is not supported. Decoding
* is still possible in multi-call mode by simply
* calling xz_dec_run() again.
* NOTE: This return value is used only if
* XZ_DEC_ANY_CHECK was defined at build time,
* which is not used in the kernel. Unsupported
* check types return XZ_OPTIONS_ERROR if
* XZ_DEC_ANY_CHECK was not defined at build time.
* @XZ_MEM_ERROR: Allocating memory failed. This return code is
* possible only if the decoder was initialized
* with XZ_DYNALLOC. The amount of memory that was
* tried to be allocated was no more than the
* dict_max argument given to xz_dec_init().
* @XZ_MEMLIMIT_ERROR: A bigger LZMA2 dictionary would be needed than
* allowed by the dict_max argument given to
* xz_dec_init(). This return value is possible
* only in multi-call mode (XZ_PREALLOC or
* XZ_DYNALLOC); the single-call mode (XZ_SINGLE)
* ignores the dict_max argument.
* @XZ_FORMAT_ERROR: File format was not recognized (wrong magic
* bytes).
* @XZ_OPTIONS_ERROR: This implementation doesn't support the requested
* compression options. In the decoder this means
* that the header CRC32 matches, but the header
* itself specifies something that we don't support.
* @XZ_DATA_ERROR: Compressed data is corrupt.
* @XZ_BUF_ERROR: Cannot make any progress. Details are slightly
* different between multi-call and single-call
* mode; more information below.
*
* In multi-call mode, XZ_BUF_ERROR is returned when two consecutive calls
* to XZ code cannot consume any input and cannot produce any new output.
* This happens when there is no new input available, or the output buffer
* is full while at least one output byte is still pending. Assuming your
* code is not buggy, you can get this error only when decoding a compressed
* stream that is truncated or otherwise corrupt.
*
* In single-call mode, XZ_BUF_ERROR is returned only when the output buffer
* is too small, or the compressed input is corrupt in a way that makes the
* decoder produce more output than the caller expected. When it is
* (relatively) clear that the compressed input is truncated, XZ_DATA_ERROR
* is used instead of XZ_BUF_ERROR.
*/
enum xz_ret {
XZ_OK,
XZ_STREAM_END,
XZ_UNSUPPORTED_CHECK,
XZ_MEM_ERROR,
XZ_MEMLIMIT_ERROR,
XZ_FORMAT_ERROR,
XZ_OPTIONS_ERROR,
XZ_DATA_ERROR,
XZ_BUF_ERROR
};
/**
* struct xz_buf - Passing input and output buffers to XZ code
* @in: Beginning of the input buffer. This may be NULL if and only
* if in_pos is equal to in_size.
* @in_pos: Current position in the input buffer. This must not exceed
* in_size.
* @in_size: Size of the input buffer
* @out: Beginning of the output buffer. This may be NULL if and only
* if out_pos is equal to out_size.
* @out_pos: Current position in the output buffer. This must not exceed
* out_size.
* @out_size: Size of the output buffer
*
* Only the contents of the output buffer from out[out_pos] onward, and
* the variables in_pos and out_pos are modified by the XZ code.
*/
struct xz_buf {
const uint8_t *in;
size_t in_pos;
size_t in_size;
uint8_t *out;
size_t out_pos;
size_t out_size;
};
/**
* struct xz_dec - Opaque type to hold the XZ decoder state
*/
struct xz_dec;
/**
* xz_dec_init() - Allocate and initialize a XZ decoder state
* @mode: Operation mode
* @dict_max: Maximum size of the LZMA2 dictionary (history buffer) for
* multi-call decoding. This is ignored in single-call mode
* (mode == XZ_SINGLE). LZMA2 dictionary is always 2^n bytes
* or 2^n + 2^(n-1) bytes (the latter sizes are less common
* in practice), so other values for dict_max don't make sense.
* In the kernel, dictionary sizes of 64 KiB, 128 KiB, 256 KiB,
* 512 KiB, and 1 MiB are probably the only reasonable values,
* except for kernel and initramfs images where a bigger
* dictionary can be fine and useful.
*
* Single-call mode (XZ_SINGLE): xz_dec_run() decodes the whole stream at
* once. The caller must provide enough output space or the decoding will
* fail. The output space is used as the dictionary buffer, which is why
* there is no need to allocate the dictionary as part of the decoder's
* internal state.
*
* Because the output buffer is used as the workspace, streams encoded using
* a big dictionary are not a problem in single-call mode. It is enough that
* the output buffer is big enough to hold the actual uncompressed data; it
* can be smaller than the dictionary size stored in the stream headers.
*
* Multi-call mode with preallocated dictionary (XZ_PREALLOC): dict_max bytes
* of memory is preallocated for the LZMA2 dictionary. This way there is no
* risk that xz_dec_run() could run out of memory, since xz_dec_run() will
* never allocate any memory. Instead, if the preallocated dictionary is too
* small for decoding the given input stream, xz_dec_run() will return
* XZ_MEMLIMIT_ERROR. Thus, it is important to know what kind of data will be
* decoded to avoid allocating excessive amount of memory for the dictionary.
*
* Multi-call mode with dynamically allocated dictionary (XZ_DYNALLOC):
* dict_max specifies the maximum allowed dictionary size that xz_dec_run()
* may allocate once it has parsed the dictionary size from the stream
* headers. This way excessive allocations can be avoided while still
* limiting the maximum memory usage to a sane value to prevent running the
* system out of memory when decompressing streams from untrusted sources.
*
* On success, xz_dec_init() returns a pointer to struct xz_dec, which is
* ready to be used with xz_dec_run(). If memory allocation fails,
* xz_dec_init() returns NULL.
*/
XZ_EXTERN struct xz_dec * XZ_FUNC xz_dec_init(
enum xz_mode mode, uint32_t dict_max);
/**
* xz_dec_run() - Run the XZ decoder
* @s: Decoder state allocated using xz_dec_init()
* @b: Input and output buffers
*
* The possible return values depend on build options and operation mode.
* See enum xz_ret for details.
*
* NOTE: If an error occurs in single-call mode (return value is not
* XZ_STREAM_END), b->in_pos and b->out_pos are not modified, and the
* contents of the output buffer from b->out[b->out_pos] onward are
* undefined. This is true even after XZ_BUF_ERROR, because with some filter
* chains, there may be a second pass over the output buffer, and this pass
* cannot be properly done if the output buffer is truncated. Thus, you
* cannot give the single-call decoder a too small buffer and then expect to
* get that amount valid data from the beginning of the stream. You must use
* the multi-call decoder if you don't want to uncompress the whole stream.
*/
XZ_EXTERN enum xz_ret XZ_FUNC xz_dec_run(struct xz_dec *s, struct xz_buf *b);
/**
* xz_dec_reset() - Reset an already allocated decoder state
* @s: Decoder state allocated using xz_dec_init()
*
* This function can be used to reset the multi-call decoder state without
* freeing and reallocating memory with xz_dec_end() and xz_dec_init().
*
* In single-call mode, xz_dec_reset() is always called in the beginning of
* xz_dec_run(). Thus, explicit call to xz_dec_reset() is useful only in
* multi-call mode.
*/
XZ_EXTERN void XZ_FUNC xz_dec_reset(struct xz_dec *s);
/**
* xz_dec_end() - Free the memory allocated for the decoder state
* @s: Decoder state allocated using xz_dec_init(). If s is NULL,
* this function does nothing.
*/
XZ_EXTERN void XZ_FUNC xz_dec_end(struct xz_dec *s);
/*
* Standalone build (userspace build or in-kernel build for boot time use)
* needs a CRC32 implementation. For normal in-kernel use, kernel's own
* CRC32 module is used instead, and users of this module don't need to
* care about the functions below.
*/
#ifndef XZ_INTERNAL_CRC32
# ifdef __KERNEL__
# define XZ_INTERNAL_CRC32 0
# else
# define XZ_INTERNAL_CRC32 1
# endif
#endif
#if XZ_INTERNAL_CRC32
/*
* This must be called before any other xz_* function to initialize
* the CRC32 lookup table.
*/
XZ_EXTERN void XZ_FUNC xz_crc32_init(void);
/*
* Update CRC32 value using the polynomial from IEEE-802.3. To start a new
* calculation, the third argument must be zero. To continue the calculation,
* the previously returned value is passed as the third argument.
*/
XZ_EXTERN uint32_t XZ_FUNC xz_crc32(
const uint8_t *buf, size_t size, uint32_t crc);
#endif
#endif
-123
View File
@@ -1,123 +0,0 @@
/*
* Private includes and definitions for userspace use of XZ Embedded
*
* Author: Lasse Collin <lasse.collin@tukaani.org>
*
* This file has been put into the public domain.
* You can do whatever you want with this file.
*/
#ifndef XZ_CONFIG_H
#define XZ_CONFIG_H
/* Uncomment as needed to enable BCJ filter decoders. */
/* #define XZ_DEC_X86 */
/* #define XZ_DEC_POWERPC */
/* #define XZ_DEC_IA64 */
/* #define XZ_DEC_ARM */
/* #define XZ_DEC_ARMTHUMB */
/* #define XZ_DEC_SPARC */
#include <stdbool.h>
#include <stdlib.h>
#include <string.h>
#include "xz.h"
#define kmalloc(size, flags) malloc(size)
#define kfree(ptr) free(ptr)
#define vmalloc(size) malloc(size)
#define vfree(ptr) free(ptr)
#define memeq(a, b, size) (memcmp(a, b, size) == 0)
#define memzero(buf, size) memset(buf, 0, size)
#undef min
#undef min_t
#define min(x, y) ((x) < (y) ? (x) : (y))
#define min_t(type, x, y) min(x, y)
/*
* Some functions have been marked with __always_inline to keep the
* performance reasonable even when the compiler is optimizing for
* small code size. You may be able to save a few bytes by #defining
* __always_inline to plain inline, but don't complain if the code
* becomes slow.
*
* NOTE: System headers on GNU/Linux may #define this macro already,
* so if you want to change it, you need to #undef it first.
*/
#ifndef __always_inline
# ifdef __GNUC__
# define __always_inline \
inline __attribute__((__always_inline__))
# else
# define __always_inline inline
# endif
#endif
/*
* Some functions are marked to never be inlined to reduce stack usage.
* If you don't care about stack usage, you may want to modify this so
* that noinline_for_stack is #defined to be empty even when using GCC.
* Doing so may save a few bytes in binary size.
*/
#ifndef noinline_for_stack
# ifdef __GNUC__
# define noinline_for_stack __attribute__((__noinline__))
# else
# define noinline_for_stack
# endif
#endif
/* Inline functions to access unaligned unsigned 32-bit integers */
#ifndef get_unaligned_le32
static inline uint32_t XZ_FUNC get_unaligned_le32(const uint8_t *buf)
{
return (uint32_t)buf[0]
| ((uint32_t)buf[1] << 8)
| ((uint32_t)buf[2] << 16)
| ((uint32_t)buf[3] << 24);
}
#endif
#ifndef get_unaligned_be32
static inline uint32_t XZ_FUNC get_unaligned_be32(const uint8_t *buf)
{
return (uint32_t)(buf[0] << 24)
| ((uint32_t)buf[1] << 16)
| ((uint32_t)buf[2] << 8)
| (uint32_t)buf[3];
}
#endif
#ifndef put_unaligned_le32
static inline void XZ_FUNC put_unaligned_le32(uint32_t val, uint8_t *buf)
{
buf[0] = (uint8_t)val;
buf[1] = (uint8_t)(val >> 8);
buf[2] = (uint8_t)(val >> 16);
buf[3] = (uint8_t)(val >> 24);
}
#endif
#ifndef put_unaligned_be32
static inline void XZ_FUNC put_unaligned_be32(uint32_t val, uint8_t *buf)
{
buf[0] = (uint8_t)(val >> 24);
buf[1] = (uint8_t)(val >> 16);
buf[2] = (uint8_t)(val >> 8);
buf[3] = (uint8_t)val;
}
#endif
/*
* Use get_unaligned_le32() also for aligned access for simplicity. On
* little endian systems, #define get_le32(ptr) (*(const uint32_t *)(ptr))
* could save a few bytes in code size.
*/
#ifndef get_le32
# define get_le32 get_unaligned_le32
#endif
#endif
-564
View File
@@ -1,564 +0,0 @@
/*
* Branch/Call/Jump (BCJ) filter decoders
*
* Authors: Lasse Collin <lasse.collin@tukaani.org>
* Igor Pavlov <http://7-zip.org/>
*
* This file has been put into the public domain.
* You can do whatever you want with this file.
*/
#include "xz_private.h"
/*
* The rest of the file is inside this ifdef. It makes things a little more
* convenient when building without support for any BCJ filters.
*/
#ifdef XZ_DEC_BCJ
struct xz_dec_bcj {
/* Type of the BCJ filter being used */
enum {
BCJ_X86 = 4, /* x86 or x86-64 */
BCJ_POWERPC = 5, /* Big endian only */
BCJ_IA64 = 6, /* Big or little endian */
BCJ_ARM = 7, /* Little endian only */
BCJ_ARMTHUMB = 8, /* Little endian only */
BCJ_SPARC = 9 /* Big or little endian */
} type;
/*
* Return value of the next filter in the chain. We need to preserve
* this information across calls, because we must not call the next
* filter anymore once it has returned XZ_STREAM_END.
*/
enum xz_ret ret;
/* True if we are operating in single-call mode. */
bool single_call;
/*
* Absolute position relative to the beginning of the uncompressed
* data (in a single .xz Block). We care only about the lowest 32
* bits so this doesn't need to be uint64_t even with big files.
*/
uint32_t pos;
/* x86 filter state */
uint32_t x86_prev_mask;
/* Temporary space to hold the variables from struct xz_buf */
uint8_t *out;
size_t out_pos;
size_t out_size;
struct {
/* Amount of already filtered data in the beginning of buf */
size_t filtered;
/* Total amount of data currently stored in buf */
size_t size;
/*
* Buffer to hold a mix of filtered and unfiltered data. This
* needs to be big enough to hold Alignment + 2 * Look-ahead:
*
* Type Alignment Look-ahead
* x86 1 4
* PowerPC 4 0
* IA-64 16 0
* ARM 4 0
* ARM-Thumb 2 2
* SPARC 4 0
*/
uint8_t buf[16];
} temp;
};
#ifdef XZ_DEC_X86
/*
* This is macro used to test the most significant byte of a memory address
* in an x86 instruction.
*/
#define bcj_x86_test_msbyte(b) ((b) == 0x00 || (b) == 0xFF)
static noinline_for_stack size_t XZ_FUNC bcj_x86(
struct xz_dec_bcj *s, uint8_t *buf, size_t size)
{
static const bool mask_to_allowed_status[8]
= { true, true, true, false, true, false, false, false };
static const uint8_t mask_to_bit_num[8] = { 0, 1, 2, 2, 3, 3, 3, 3 };
size_t i;
size_t prev_pos = (size_t)-1;
uint32_t prev_mask = s->x86_prev_mask;
uint32_t src;
uint32_t dest;
uint32_t j;
uint8_t b;
if (size <= 4)
return 0;
size -= 4;
for (i = 0; i < size; ++i) {
if ((buf[i] & 0xFE) != 0xE8)
continue;
prev_pos = i - prev_pos;
if (prev_pos > 3) {
prev_mask = 0;
} else {
prev_mask = (prev_mask << (prev_pos - 1)) & 7;
if (prev_mask != 0) {
b = buf[i + 4 - mask_to_bit_num[prev_mask]];
if (!mask_to_allowed_status[prev_mask]
|| bcj_x86_test_msbyte(b)) {
prev_pos = i;
prev_mask = (prev_mask << 1) | 1;
continue;
}
}
}
prev_pos = i;
if (bcj_x86_test_msbyte(buf[i + 4])) {
src = get_unaligned_le32(buf + i + 1);
while (true) {
dest = src - (s->pos + (uint32_t)i + 5);
if (prev_mask == 0)
break;
j = mask_to_bit_num[prev_mask] * 8;
b = (uint8_t)(dest >> (24 - j));
if (!bcj_x86_test_msbyte(b))
break;
src = dest ^ (((uint32_t)1 << (32 - j)) - 1);
}
dest &= 0x01FFFFFF;
dest |= (uint32_t)0 - (dest & 0x01000000);
put_unaligned_le32(dest, buf + i + 1);
i += 4;
} else {
prev_mask = (prev_mask << 1) | 1;
}
}
prev_pos = i - prev_pos;
s->x86_prev_mask = prev_pos > 3 ? 0 : prev_mask << (prev_pos - 1);
return i;
}
#endif
#ifdef XZ_DEC_POWERPC
static noinline_for_stack size_t XZ_FUNC bcj_powerpc(
struct xz_dec_bcj *s, uint8_t *buf, size_t size)
{
size_t i;
uint32_t instr;
for (i = 0; i + 4 <= size; i += 4) {
instr = get_unaligned_be32(buf + i);
if ((instr & 0xFC000003) == 0x48000001) {
instr &= 0x03FFFFFC;
instr -= s->pos + (uint32_t)i;
instr &= 0x03FFFFFC;
instr |= 0x48000001;
put_unaligned_be32(instr, buf + i);
}
}
return i;
}
#endif
#ifdef XZ_DEC_IA64
static noinline_for_stack size_t XZ_FUNC bcj_ia64(
struct xz_dec_bcj *s, uint8_t *buf, size_t size)
{
static const uint8_t branch_table[32] = {
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
4, 4, 6, 6, 0, 0, 7, 7,
4, 4, 0, 0, 4, 4, 0, 0
};
/*
* The local variables take a little bit stack space, but it's less
* than what LZMA2 decoder takes, so it doesn't make sense to reduce
* stack usage here without doing that for the LZMA2 decoder too.
*/
/* Loop counters */
size_t i;
size_t j;
/* Instruction slot (0, 1, or 2) in the 128-bit instruction word */
uint32_t slot;
/* Bitwise offset of the instruction indicated by slot */
uint32_t bit_pos;
/* bit_pos split into byte and bit parts */
uint32_t byte_pos;
uint32_t bit_res;
/* Address part of an instruction */
uint32_t addr;
/* Mask used to detect which instructions to convert */
uint32_t mask;
/* 41-bit instruction stored somewhere in the lowest 48 bits */
uint64_t instr;
/* Instruction normalized with bit_res for easier manipulation */
uint64_t norm;
for (i = 0; i + 16 <= size; i += 16) {
mask = branch_table[buf[i] & 0x1F];
for (slot = 0, bit_pos = 5; slot < 3; ++slot, bit_pos += 41) {
if (((mask >> slot) & 1) == 0)
continue;
byte_pos = bit_pos >> 3;
bit_res = bit_pos & 7;
instr = 0;
for (j = 0; j < 6; ++j)
instr |= (uint64_t)(buf[i + j + byte_pos])
<< (8 * j);
norm = instr >> bit_res;
if (((norm >> 37) & 0x0F) == 0x05
&& ((norm >> 9) & 0x07) == 0) {
addr = (norm >> 13) & 0x0FFFFF;
addr |= ((uint32_t)(norm >> 36) & 1) << 20;
addr <<= 4;
addr -= s->pos + (uint32_t)i;
addr >>= 4;
norm &= ~((uint64_t)0x8FFFFF << 13);
norm |= (uint64_t)(addr & 0x0FFFFF) << 13;
norm |= (uint64_t)(addr & 0x100000)
<< (36 - 20);
instr &= (1 << bit_res) - 1;
instr |= norm << bit_res;
for (j = 0; j < 6; j++)
buf[i + j + byte_pos]
= (uint8_t)(instr >> (8 * j));
}
}
}
return i;
}
#endif
#ifdef XZ_DEC_ARM
static noinline_for_stack size_t XZ_FUNC bcj_arm(
struct xz_dec_bcj *s, uint8_t *buf, size_t size)
{
size_t i;
uint32_t addr;
for (i = 0; i + 4 <= size; i += 4) {
if (buf[i + 3] == 0xEB) {
addr = (uint32_t)buf[i] | ((uint32_t)buf[i + 1] << 8)
| ((uint32_t)buf[i + 2] << 16);
addr <<= 2;
addr -= s->pos + (uint32_t)i + 8;
addr >>= 2;
buf[i] = (uint8_t)addr;
buf[i + 1] = (uint8_t)(addr >> 8);
buf[i + 2] = (uint8_t)(addr >> 16);
}
}
return i;
}
#endif
#ifdef XZ_DEC_ARMTHUMB
static noinline_for_stack size_t XZ_FUNC bcj_armthumb(
struct xz_dec_bcj *s, uint8_t *buf, size_t size)
{
size_t i;
uint32_t addr;
for (i = 0; i + 4 <= size; i += 2) {
if ((buf[i + 1] & 0xF8) == 0xF0
&& (buf[i + 3] & 0xF8) == 0xF8) {
addr = (((uint32_t)buf[i + 1] & 0x07) << 19)
| ((uint32_t)buf[i] << 11)
| (((uint32_t)buf[i + 3] & 0x07) << 8)
| (uint32_t)buf[i + 2];
addr <<= 1;
addr -= s->pos + (uint32_t)i + 4;
addr >>= 1;
buf[i + 1] = (uint8_t)(0xF0 | ((addr >> 19) & 0x07));
buf[i] = (uint8_t)(addr >> 11);
buf[i + 3] = (uint8_t)(0xF8 | ((addr >> 8) & 0x07));
buf[i + 2] = (uint8_t)addr;
i += 2;
}
}
return i;
}
#endif
#ifdef XZ_DEC_SPARC
static noinline_for_stack size_t XZ_FUNC bcj_sparc(
struct xz_dec_bcj *s, uint8_t *buf, size_t size)
{
size_t i;
uint32_t instr;
for (i = 0; i + 4 <= size; i += 4) {
instr = get_unaligned_be32(buf + i);
if ((instr >> 22) == 0x100 || (instr >> 22) == 0x1FF) {
instr <<= 2;
instr -= s->pos + (uint32_t)i;
instr >>= 2;
instr = ((uint32_t)0x40000000 - (instr & 0x400000))
| 0x40000000 | (instr & 0x3FFFFF);
put_unaligned_be32(instr, buf + i);
}
}
return i;
}
#endif
/*
* Apply the selected BCJ filter. Update *pos and s->pos to match the amount
* of data that got filtered.
*
* NOTE: This is implemented as a switch statement to avoid using function
* pointers, which could be problematic in the kernel boot code, which must
* avoid pointers to static data (at least on x86).
*/
static void XZ_FUNC bcj_apply(struct xz_dec_bcj *s,
uint8_t *buf, size_t *pos, size_t size)
{
size_t filtered;
buf += *pos;
size -= *pos;
switch (s->type) {
#ifdef XZ_DEC_X86
case BCJ_X86:
filtered = bcj_x86(s, buf, size);
break;
#endif
#ifdef XZ_DEC_POWERPC
case BCJ_POWERPC:
filtered = bcj_powerpc(s, buf, size);
break;
#endif
#ifdef XZ_DEC_IA64
case BCJ_IA64:
filtered = bcj_ia64(s, buf, size);
break;
#endif
#ifdef XZ_DEC_ARM
case BCJ_ARM:
filtered = bcj_arm(s, buf, size);
break;
#endif
#ifdef XZ_DEC_ARMTHUMB
case BCJ_ARMTHUMB:
filtered = bcj_armthumb(s, buf, size);
break;
#endif
#ifdef XZ_DEC_SPARC
case BCJ_SPARC:
filtered = bcj_sparc(s, buf, size);
break;
#endif
default:
/* Never reached but silence compiler warnings. */
filtered = 0;
break;
}
*pos += filtered;
s->pos += filtered;
}
/*
* Flush pending filtered data from temp to the output buffer.
* Move the remaining mixture of possibly filtered and unfiltered
* data to the beginning of temp.
*/
static void XZ_FUNC bcj_flush(struct xz_dec_bcj *s, struct xz_buf *b)
{
size_t copy_size;
copy_size = min_t(size_t, s->temp.filtered, b->out_size - b->out_pos);
memcpy(b->out + b->out_pos, s->temp.buf, copy_size);
b->out_pos += copy_size;
s->temp.filtered -= copy_size;
s->temp.size -= copy_size;
memmove(s->temp.buf, s->temp.buf + copy_size, s->temp.size);
}
/*
* The BCJ filter functions are primitive in sense that they process the
* data in chunks of 1-16 bytes. To hide this issue, this function does
* some buffering.
*/
XZ_EXTERN enum xz_ret XZ_FUNC xz_dec_bcj_run(struct xz_dec_bcj *s,
struct xz_dec_lzma2 *lzma2, struct xz_buf *b)
{
size_t out_start;
/*
* Flush pending already filtered data to the output buffer. Return
* immediatelly if we couldn't flush everything, or if the next
* filter in the chain had already returned XZ_STREAM_END.
*/
if (s->temp.filtered > 0) {
bcj_flush(s, b);
if (s->temp.filtered > 0)
return XZ_OK;
if (s->ret == XZ_STREAM_END)
return XZ_STREAM_END;
}
/*
* If we have more output space than what is currently pending in
* temp, copy the unfiltered data from temp to the output buffer
* and try to fill the output buffer by decoding more data from the
* next filter in the chain. Apply the BCJ filter on the new data
* in the output buffer. If everything cannot be filtered, copy it
* to temp and rewind the output buffer position accordingly.
*/
if (s->temp.size < b->out_size - b->out_pos) {
out_start = b->out_pos;
memcpy(b->out + b->out_pos, s->temp.buf, s->temp.size);
b->out_pos += s->temp.size;
s->ret = xz_dec_lzma2_run(lzma2, b);
if (s->ret != XZ_STREAM_END
&& (s->ret != XZ_OK || s->single_call))
return s->ret;
bcj_apply(s, b->out, &out_start, b->out_pos);
/*
* As an exception, if the next filter returned XZ_STREAM_END,
* we can do that too, since the last few bytes that remain
* unfiltered are meant to remain unfiltered.
*/
if (s->ret == XZ_STREAM_END)
return XZ_STREAM_END;
s->temp.size = b->out_pos - out_start;
b->out_pos -= s->temp.size;
memcpy(s->temp.buf, b->out + b->out_pos, s->temp.size);
}
/*
* If we have unfiltered data in temp, try to fill by decoding more
* data from the next filter. Apply the BCJ filter on temp. Then we
* hopefully can fill the actual output buffer by copying filtered
* data from temp. A mix of filtered and unfiltered data may be left
* in temp; it will be taken care on the next call to this function.
*/
if (s->temp.size > 0) {
/* Make b->out{,_pos,_size} temporarily point to s->temp. */
s->out = b->out;
s->out_pos = b->out_pos;
s->out_size = b->out_size;
b->out = s->temp.buf;
b->out_pos = s->temp.size;
b->out_size = sizeof(s->temp.buf);
s->ret = xz_dec_lzma2_run(lzma2, b);
s->temp.size = b->out_pos;
b->out = s->out;
b->out_pos = s->out_pos;
b->out_size = s->out_size;
if (s->ret != XZ_OK && s->ret != XZ_STREAM_END)
return s->ret;
bcj_apply(s, s->temp.buf, &s->temp.filtered, s->temp.size);
/*
* If the next filter returned XZ_STREAM_END, we mark that
* everything is filtered, since the last unfiltered bytes
* of the stream are meant to be left as is.
*/
if (s->ret == XZ_STREAM_END)
s->temp.filtered = s->temp.size;
bcj_flush(s, b);
if (s->temp.filtered > 0)
return XZ_OK;
}
return s->ret;
}
XZ_EXTERN struct xz_dec_bcj * XZ_FUNC xz_dec_bcj_create(bool single_call)
{
struct xz_dec_bcj *s = kmalloc(sizeof(*s), GFP_KERNEL);
if (s != NULL)
s->single_call = single_call;
return s;
}
XZ_EXTERN enum xz_ret XZ_FUNC xz_dec_bcj_reset(
struct xz_dec_bcj *s, uint8_t id)
{
switch (id) {
#ifdef XZ_DEC_X86
case BCJ_X86:
#endif
#ifdef XZ_DEC_POWERPC
case BCJ_POWERPC:
#endif
#ifdef XZ_DEC_IA64
case BCJ_IA64:
#endif
#ifdef XZ_DEC_ARM
case BCJ_ARM:
#endif
#ifdef XZ_DEC_ARMTHUMB
case BCJ_ARMTHUMB:
#endif
#ifdef XZ_DEC_SPARC
case BCJ_SPARC:
#endif
break;
default:
/* Unsupported Filter ID */
return XZ_OPTIONS_ERROR;
}
s->type = id;
s->ret = XZ_OK;
s->pos = 0;
s->x86_prev_mask = 0;
s->temp.filtered = 0;
s->temp.size = 0;
return XZ_OK;
}
#endif
File diff suppressed because it is too large. Load diff
-822
View File
@@ -1,822 +0,0 @@
/*
* .xz Stream decoder
*
* Author: Lasse Collin <lasse.collin@tukaani.org>
*
* This file has been put into the public domain.
* You can do whatever you want with this file.
*/
#include "xz_private.h"
#include "xz_stream.h"
/* Hash used to validate the Index field */
struct xz_dec_hash {
vli_type unpadded;
vli_type uncompressed;
uint32_t crc32;
};
struct xz_dec {
/* Position in dec_main() */
enum {
SEQ_STREAM_HEADER,
SEQ_BLOCK_START,
SEQ_BLOCK_HEADER,
SEQ_BLOCK_UNCOMPRESS,
SEQ_BLOCK_PADDING,
SEQ_BLOCK_CHECK,
SEQ_INDEX,
SEQ_INDEX_PADDING,
SEQ_INDEX_CRC32,
SEQ_STREAM_FOOTER
} sequence;
/* Position in variable-length integers and Check fields */
uint32_t pos;
/* Variable-length integer decoded by dec_vli() */
vli_type vli;
/* Saved in_pos and out_pos */
size_t in_start;
size_t out_start;
/* CRC32 value in Block or Index */
uint32_t crc32;
/* Type of the integrity check calculated from uncompressed data */
enum xz_check check_type;
/* Operation mode */
enum xz_mode mode;
/*
* True if the next call to xz_dec_run() is allowed to return
* XZ_BUF_ERROR.
*/
bool allow_buf_error;
/* Information stored in Block Header */
struct {
/*
* Value stored in the Compressed Size field, or
* VLI_UNKNOWN if Compressed Size is not present.
*/
vli_type compressed;
/*
* Value stored in the Uncompressed Size field, or
* VLI_UNKNOWN if Uncompressed Size is not present.
*/
vli_type uncompressed;
/* Size of the Block Header field */
uint32_t size;
} block_header;
/* Information collected when decoding Blocks */
struct {
/* Observed compressed size of the current Block */
vli_type compressed;
/* Observed uncompressed size of the current Block */
vli_type uncompressed;
/* Number of Blocks decoded so far */
vli_type count;
/*
* Hash calculated from the Block sizes. This is used to
* validate the Index field.
*/
struct xz_dec_hash hash;
} block;
/* Variables needed when verifying the Index field */
struct {
/* Position in dec_index() */
enum {
SEQ_INDEX_COUNT,
SEQ_INDEX_UNPADDED,
SEQ_INDEX_UNCOMPRESSED
} sequence;
/* Size of the Index in bytes */
vli_type size;
/* Number of Records (matches block.count in valid files) */
vli_type count;
/*
* Hash calculated from the Records (matches block.hash in
* valid files).
*/
struct xz_dec_hash hash;
} index;
/*
* Temporary buffer needed to hold Stream Header, Block Header,
* and Stream Footer. The Block Header is the biggest (1 KiB)
* so we reserve space according to that. buf[] has to be aligned
* to a multiple of four bytes; the size_t variables before it
* should guarantee this.
*/
struct {
size_t pos;
size_t size;
uint8_t buf[1024];
} temp;
struct xz_dec_lzma2 *lzma2;
#ifdef XZ_DEC_BCJ
struct xz_dec_bcj *bcj;
bool bcj_active;
#endif
};
#ifdef XZ_DEC_ANY_CHECK
/* Sizes of the Check field with different Check IDs */
static const uint8_t check_sizes[16] = {
0,
4, 4, 4,
8, 8, 8,
16, 16, 16,
32, 32, 32,
64, 64, 64
};
#endif
/*
* Fill s->temp by copying data starting from b->in[b->in_pos]. Caller
* must have set s->temp.pos to indicate how much data we are supposed
* to copy into s->temp.buf. Return true once s->temp.pos has reached
* s->temp.size.
*/
static bool XZ_FUNC fill_temp(struct xz_dec *s, struct xz_buf *b)
{
size_t copy_size = min_t(size_t,
b->in_size - b->in_pos, s->temp.size - s->temp.pos);
memcpy(s->temp.buf + s->temp.pos, b->in + b->in_pos, copy_size);
b->in_pos += copy_size;
s->temp.pos += copy_size;
if (s->temp.pos == s->temp.size) {
s->temp.pos = 0;
return true;
}
return false;
}
/* Decode a variable-length integer (little-endian base-128 encoding) */
static enum xz_ret XZ_FUNC dec_vli(struct xz_dec *s,
const uint8_t *in, size_t *in_pos, size_t in_size)
{
uint8_t byte;
if (s->pos == 0)
s->vli = 0;
while (*in_pos < in_size) {
byte = in[*in_pos];
++*in_pos;
s->vli |= (vli_type)(byte & 0x7F) << s->pos;
if ((byte & 0x80) == 0) {
/* Don't allow non-minimal encodings. */
if (byte == 0 && s->pos != 0)
return XZ_DATA_ERROR;
s->pos = 0;
return XZ_STREAM_END;
}
s->pos += 7;
if (s->pos == 7 * VLI_BYTES_MAX)
return XZ_DATA_ERROR;
}
return XZ_OK;
}
/*
* Decode the Compressed Data field from a Block. Update and validate
* the observed compressed and uncompressed sizes of the Block so that
* they don't exceed the values possibly stored in the Block Header
* (validation assumes that no integer overflow occurs, since vli_type
* is normally uint64_t). Update the CRC32 if presence of the CRC32
* field was indicated in Stream Header.
*
* Once the decoding is finished, validate that the observed sizes match
* the sizes possibly stored in the Block Header. Update the hash and
* Block count, which are later used to validate the Index field.
*/
static enum xz_ret XZ_FUNC dec_block(struct xz_dec *s, struct xz_buf *b)
{
enum xz_ret ret;
s->in_start = b->in_pos;
s->out_start = b->out_pos;
#ifdef XZ_DEC_BCJ
if (s->bcj_active)
ret = xz_dec_bcj_run(s->bcj, s->lzma2, b);
else
#endif
ret = xz_dec_lzma2_run(s->lzma2, b);
s->block.compressed += b->in_pos - s->in_start;
s->block.uncompressed += b->out_pos - s->out_start;
/*
* There is no need to separately check for VLI_UNKNOWN, since
* the observed sizes are always smaller than VLI_UNKNOWN.
*/
if (s->block.compressed > s->block_header.compressed
|| s->block.uncompressed
> s->block_header.uncompressed)
return XZ_DATA_ERROR;
if (s->check_type == XZ_CHECK_CRC32)
s->crc32 = xz_crc32(b->out + s->out_start,
b->out_pos - s->out_start, s->crc32);
if (ret == XZ_STREAM_END) {
if (s->block_header.compressed != VLI_UNKNOWN
&& s->block_header.compressed
!= s->block.compressed)
return XZ_DATA_ERROR;
if (s->block_header.uncompressed != VLI_UNKNOWN
&& s->block_header.uncompressed
!= s->block.uncompressed)
return XZ_DATA_ERROR;
s->block.hash.unpadded += s->block_header.size
+ s->block.compressed;
#ifdef XZ_DEC_ANY_CHECK
s->block.hash.unpadded += check_sizes[s->check_type];
#else
if (s->check_type == XZ_CHECK_CRC32)
s->block.hash.unpadded += 4;
#endif
s->block.hash.uncompressed += s->block.uncompressed;
s->block.hash.crc32 = xz_crc32(
(const uint8_t *)&s->block.hash,
sizeof(s->block.hash), s->block.hash.crc32);
++s->block.count;
}
return ret;
}
/* Update the Index size and the CRC32 value. */
static void XZ_FUNC index_update(struct xz_dec *s, const struct xz_buf *b)
{
size_t in_used = b->in_pos - s->in_start;
s->index.size += in_used;
s->crc32 = xz_crc32(b->in + s->in_start, in_used, s->crc32);
}
/*
* Decode the Number of Records, Unpadded Size, and Uncompressed Size
* fields from the Index field. That is, Index Padding and CRC32 are not
* decoded by this function.
*
* This can return XZ_OK (more input needed), XZ_STREAM_END (everything
* successfully decoded), or XZ_DATA_ERROR (input is corrupt).
*/
static enum xz_ret XZ_FUNC dec_index(struct xz_dec *s, struct xz_buf *b)
{
enum xz_ret ret;
do {
ret = dec_vli(s, b->in, &b->in_pos, b->in_size);
if (ret != XZ_STREAM_END) {
index_update(s, b);
return ret;
}
switch (s->index.sequence) {
case SEQ_INDEX_COUNT:
s->index.count = s->vli;
/*
* Validate that the Number of Records field
* indicates the same number of Records as
* there were Blocks in the Stream.
*/
if (s->index.count != s->block.count)
return XZ_DATA_ERROR;
s->index.sequence = SEQ_INDEX_UNPADDED;
break;
case SEQ_INDEX_UNPADDED:
s->index.hash.unpadded += s->vli;
s->index.sequence = SEQ_INDEX_UNCOMPRESSED;
break;
case SEQ_INDEX_UNCOMPRESSED:
s->index.hash.uncompressed += s->vli;
s->index.hash.crc32 = xz_crc32(
(const uint8_t *)&s->index.hash,
sizeof(s->index.hash),
s->index.hash.crc32);
--s->index.count;
s->index.sequence = SEQ_INDEX_UNPADDED;
break;
}
} while (s->index.count > 0);
return XZ_STREAM_END;
}
/*
* Validate that the next four input bytes match the value of s->crc32.
* s->pos must be zero when starting to validate the first byte.
*/
static enum xz_ret XZ_FUNC crc32_validate(struct xz_dec *s, struct xz_buf *b)
{
do {
if (b->in_pos == b->in_size)
return XZ_OK;
if (((s->crc32 >> s->pos) & 0xFF) != b->in[b->in_pos++])
return XZ_DATA_ERROR;
s->pos += 8;
} while (s->pos < 32);
s->crc32 = 0;
s->pos = 0;
return XZ_STREAM_END;
}
#ifdef XZ_DEC_ANY_CHECK
/*
* Skip over the Check field when the Check ID is not supported.
* Returns true once the whole Check field has been skipped over.
*/
static bool XZ_FUNC check_skip(struct xz_dec *s, struct xz_buf *b)
{
while (s->pos < check_sizes[s->check_type]) {
if (b->in_pos == b->in_size)
return false;
++b->in_pos;
++s->pos;
}
s->pos = 0;
return true;
}
#endif
/* Decode the Stream Header field (the first 12 bytes of the .xz Stream). */
static enum xz_ret XZ_FUNC dec_stream_header(struct xz_dec *s)
{
if (!memeq(s->temp.buf, HEADER_MAGIC, HEADER_MAGIC_SIZE))
return XZ_FORMAT_ERROR;
if (xz_crc32(s->temp.buf + HEADER_MAGIC_SIZE, 2, 0)
!= get_le32(s->temp.buf + HEADER_MAGIC_SIZE + 2))
return XZ_DATA_ERROR;
if (s->temp.buf[HEADER_MAGIC_SIZE] != 0)
return XZ_OPTIONS_ERROR;
/*
* Of integrity checks, we support only none (Check ID = 0) and
* CRC32 (Check ID = 1). However, if XZ_DEC_ANY_CHECK is defined,
* we will accept other check types too, but then the check won't
* be verified and a warning (XZ_UNSUPPORTED_CHECK) will be given.
*/
s->check_type = s->temp.buf[HEADER_MAGIC_SIZE + 1];
#ifdef XZ_DEC_ANY_CHECK
if (s->check_type > XZ_CHECK_MAX)
return XZ_OPTIONS_ERROR;
if (s->check_type > XZ_CHECK_CRC32)
return XZ_UNSUPPORTED_CHECK;
#else
if (s->check_type > XZ_CHECK_CRC32)
return XZ_OPTIONS_ERROR;
#endif
return XZ_OK;
}
/* Decode the Stream Footer field (the last 12 bytes of the .xz Stream) */
static enum xz_ret XZ_FUNC dec_stream_footer(struct xz_dec *s)
{
if (!memeq(s->temp.buf + 10, FOOTER_MAGIC, FOOTER_MAGIC_SIZE))
return XZ_DATA_ERROR;
if (xz_crc32(s->temp.buf + 4, 6, 0) != get_le32(s->temp.buf))
return XZ_DATA_ERROR;
/*
* Validate Backward Size. Note that we never added the size of the
* Index CRC32 field to s->index.size, thus we use s->index.size / 4
* instead of s->index.size / 4 - 1.
*/
if ((s->index.size >> 2) != get_le32(s->temp.buf + 4))
return XZ_DATA_ERROR;
if (s->temp.buf[8] != 0 || s->temp.buf[9] != s->check_type)
return XZ_DATA_ERROR;
/*
* Use XZ_STREAM_END instead of XZ_OK to be more convenient
* for the caller.
*/
return XZ_STREAM_END;
}
/* Decode the Block Header and initialize the filter chain. */
static enum xz_ret XZ_FUNC dec_block_header(struct xz_dec *s)
{
enum xz_ret ret;
/*
* Validate the CRC32. We know that the temp buffer is at least
* eight bytes so this is safe.
*/
s->temp.size -= 4;
if (xz_crc32(s->temp.buf, s->temp.size, 0)
!= get_le32(s->temp.buf + s->temp.size))
return XZ_DATA_ERROR;
s->temp.pos = 2;
/*
* Catch unsupported Block Flags. We support only one or two filters
* in the chain, so we catch that with the same test.
*/
#ifdef XZ_DEC_BCJ
if (s->temp.buf[1] & 0x3E)
#else
if (s->temp.buf[1] & 0x3F)
#endif
return XZ_OPTIONS_ERROR;
/* Compressed Size */
if (s->temp.buf[1] & 0x40) {
if (dec_vli(s, s->temp.buf, &s->temp.pos, s->temp.size)
!= XZ_STREAM_END)
return XZ_DATA_ERROR;
s->block_header.compressed = s->vli;
} else {
s->block_header.compressed = VLI_UNKNOWN;
}
/* Uncompressed Size */
if (s->temp.buf[1] & 0x80) {
if (dec_vli(s, s->temp.buf, &s->temp.pos, s->temp.size)
!= XZ_STREAM_END)
return XZ_DATA_ERROR;
s->block_header.uncompressed = s->vli;
} else {
s->block_header.uncompressed = VLI_UNKNOWN;
}
#ifdef XZ_DEC_BCJ
/* If there are two filters, the first one must be a BCJ filter. */
s->bcj_active = s->temp.buf[1] & 0x01;
if (s->bcj_active) {
if (s->temp.size - s->temp.pos < 2)
return XZ_OPTIONS_ERROR;
ret = xz_dec_bcj_reset(s->bcj, s->temp.buf[s->temp.pos++]);
if (ret != XZ_OK)
return ret;
/*
* We don't support custom start offset,
* so Size of Properties must be zero.
*/
if (s->temp.buf[s->temp.pos++] != 0x00)
return XZ_OPTIONS_ERROR;
}
#endif
/* Valid Filter Flags always take at least two bytes. */
if (s->temp.size - s->temp.pos < 2)
return XZ_DATA_ERROR;
/* Filter ID = LZMA2 */
if (s->temp.buf[s->temp.pos++] != 0x21)
return XZ_OPTIONS_ERROR;
/* Size of Properties = 1-byte Filter Properties */
if (s->temp.buf[s->temp.pos++] != 0x01)
return XZ_OPTIONS_ERROR;
/* Filter Properties contains LZMA2 dictionary size. */
if (s->temp.size - s->temp.pos < 1)
return XZ_DATA_ERROR;
ret = xz_dec_lzma2_reset(s->lzma2, s->temp.buf[s->temp.pos++]);
if (ret != XZ_OK)
return ret;
/* The rest must be Header Padding. */
while (s->temp.pos < s->temp.size)
if (s->temp.buf[s->temp.pos++] != 0x00)
return XZ_OPTIONS_ERROR;
s->temp.pos = 0;
s->block.compressed = 0;
s->block.uncompressed = 0;
return XZ_OK;
}
static enum xz_ret XZ_FUNC dec_main(struct xz_dec *s, struct xz_buf *b)
{
enum xz_ret ret;
/*
* Store the start position for the case when we are in the middle
* of the Index field.
*/
s->in_start = b->in_pos;
while (true) {
switch (s->sequence) {
case SEQ_STREAM_HEADER:
/*
* Stream Header is copied to s->temp, and then
* decoded from there. This way if the caller
* gives us only little input at a time, we can
* still keep the Stream Header decoding code
* simple. Similar approach is used in many places
* in this file.
*/
if (!fill_temp(s, b))
return XZ_OK;
/*
* If dec_stream_header() returns
* XZ_UNSUPPORTED_CHECK, it is still possible
* to continue decoding if working in multi-call
* mode. Thus, update s->sequence before calling
* dec_stream_header().
*/
s->sequence = SEQ_BLOCK_START;
ret = dec_stream_header(s);
if (ret != XZ_OK)
return ret;
case SEQ_BLOCK_START:
/* We need one byte of input to continue. */
if (b->in_pos == b->in_size)
return XZ_OK;
/* See if this is the beginning of the Index field. */
if (b->in[b->in_pos] == 0) {
s->in_start = b->in_pos++;
s->sequence = SEQ_INDEX;
break;
}
/*
* Calculate the size of the Block Header and
* prepare to decode it.
*/
s->block_header.size
= ((uint32_t)b->in[b->in_pos] + 1) * 4;
s->temp.size = s->block_header.size;
s->temp.pos = 0;
s->sequence = SEQ_BLOCK_HEADER;
case SEQ_BLOCK_HEADER:
if (!fill_temp(s, b))
return XZ_OK;
ret = dec_block_header(s);
if (ret != XZ_OK)
return ret;
s->sequence = SEQ_BLOCK_UNCOMPRESS;
case SEQ_BLOCK_UNCOMPRESS:
ret = dec_block(s, b);
if (ret != XZ_STREAM_END)
return ret;
s->sequence = SEQ_BLOCK_PADDING;
case SEQ_BLOCK_PADDING:
/*
* Size of Compressed Data + Block Padding
* must be a multiple of four. We don't need
* s->block.compressed for anything else
* anymore, so we use it here to test the size
* of the Block Padding field.
*/
while (s->block.compressed & 3) {
if (b->in_pos == b->in_size)
return XZ_OK;
if (b->in[b->in_pos++] != 0)
return XZ_DATA_ERROR;
++s->block.compressed;
}
s->sequence = SEQ_BLOCK_CHECK;
case SEQ_BLOCK_CHECK:
if (s->check_type == XZ_CHECK_CRC32) {
ret = crc32_validate(s, b);
if (ret != XZ_STREAM_END)
return ret;
}
#ifdef XZ_DEC_ANY_CHECK
else if (!check_skip(s, b)) {
return XZ_OK;
}
#endif
s->sequence = SEQ_BLOCK_START;
break;
case SEQ_INDEX:
ret = dec_index(s, b);
if (ret != XZ_STREAM_END)
return ret;
s->sequence = SEQ_INDEX_PADDING;
case SEQ_INDEX_PADDING:
while ((s->index.size + (b->in_pos - s->in_start))
& 3) {
if (b->in_pos == b->in_size) {
index_update(s, b);
return XZ_OK;
}
if (b->in[b->in_pos++] != 0)
return XZ_DATA_ERROR;
}
/* Finish the CRC32 value and Index size. */
index_update(s, b);
/* Compare the hashes to validate the Index field. */
if (!memeq(&s->block.hash, &s->index.hash,
sizeof(s->block.hash)))
return XZ_DATA_ERROR;
s->sequence = SEQ_INDEX_CRC32;
case SEQ_INDEX_CRC32:
ret = crc32_validate(s, b);
if (ret != XZ_STREAM_END)
return ret;
s->temp.size = STREAM_HEADER_SIZE;
s->sequence = SEQ_STREAM_FOOTER;
case SEQ_STREAM_FOOTER:
if (!fill_temp(s, b))
return XZ_OK;
return dec_stream_footer(s);
}
}
/* Never reached */
}
/*
* xz_dec_run() is a wrapper for dec_main() to handle some special cases in
* multi-call and single-call decoding.
*
* In multi-call mode, we must return XZ_BUF_ERROR when it seems clear that we
* are not going to make any progress anymore. This is to prevent the caller
* from calling us infinitely when the input file is truncated or otherwise
* corrupt. Since zlib-style API allows that the caller fills the input buffer
* only when the decoder doesn't produce any new output, we have to be careful
* to avoid returning XZ_BUF_ERROR too easily: XZ_BUF_ERROR is returned only
* after the second consecutive call to xz_dec_run() that makes no progress.
*
* In single-call mode, if we couldn't decode everything and no error
* occurred, either the input is truncated or the output buffer is too small.
* Since we know that the last input byte never produces any output, we know
* that if all the input was consumed and decoding wasn't finished, the file
* must be corrupt. Otherwise the output buffer has to be too small or the
* file is corrupt in a way that decoding it produces too big output.
*
* If single-call decoding fails, we reset b->in_pos and b->out_pos back to
* their original values. This is because with some filter chains there won't
* be any valid uncompressed data in the output buffer unless the decoding
* actually succeeds (that's the price to pay of using the output buffer as
* the workspace).
*/
XZ_EXTERN enum xz_ret XZ_FUNC xz_dec_run(struct xz_dec *s, struct xz_buf *b)
{
size_t in_start;
size_t out_start;
enum xz_ret ret;
if (DEC_IS_SINGLE(s->mode))
xz_dec_reset(s);
in_start = b->in_pos;
out_start = b->out_pos;
ret = dec_main(s, b);
if (DEC_IS_SINGLE(s->mode)) {
if (ret == XZ_OK)
ret = b->in_pos == b->in_size
? XZ_DATA_ERROR : XZ_BUF_ERROR;
if (ret != XZ_STREAM_END) {
b->in_pos = in_start;
b->out_pos = out_start;
}
} else if (ret == XZ_OK && in_start == b->in_pos
&& out_start == b->out_pos) {
if (s->allow_buf_error)
ret = XZ_BUF_ERROR;
s->allow_buf_error = true;
} else {
s->allow_buf_error = false;
}
return ret;
}
XZ_EXTERN struct xz_dec * XZ_FUNC xz_dec_init(
enum xz_mode mode, uint32_t dict_max)
{
struct xz_dec *s = kmalloc(sizeof(*s), GFP_KERNEL);
if (s == NULL)
return NULL;
s->mode = mode;
#ifdef XZ_DEC_BCJ
s->bcj = xz_dec_bcj_create(DEC_IS_SINGLE(mode));
if (s->bcj == NULL)
goto error_bcj;
#endif
s->lzma2 = xz_dec_lzma2_create(mode, dict_max);
if (s->lzma2 == NULL)
goto error_lzma2;
xz_dec_reset(s);
return s;
error_lzma2:
#ifdef XZ_DEC_BCJ
xz_dec_bcj_end(s->bcj);
error_bcj:
#endif
kfree(s);
return NULL;
}
XZ_EXTERN void XZ_FUNC xz_dec_reset(struct xz_dec *s)
{
s->sequence = SEQ_STREAM_HEADER;
s->allow_buf_error = false;
s->pos = 0;
s->crc32 = 0;
memzero(&s->block, sizeof(s->block));
memzero(&s->index, sizeof(s->index));
s->temp.pos = 0;
s->temp.size = STREAM_HEADER_SIZE;
}
XZ_EXTERN void XZ_FUNC xz_dec_end(struct xz_dec *s)
{
if (s != NULL) {
xz_dec_lzma2_end(s->lzma2);
#ifdef XZ_DEC_BCJ
xz_dec_bcj_end(s->bcj);
#endif
kfree(s);
}
}
-204
View File
@@ -1,204 +0,0 @@
/*
* LZMA2 definitions
*
* Authors: Lasse Collin <lasse.collin@tukaani.org>
* Igor Pavlov <http://7-zip.org/>
*
* This file has been put into the public domain.
* You can do whatever you want with this file.
*/
#ifndef XZ_LZMA2_H
#define XZ_LZMA2_H
/* Range coder constants */
#define RC_SHIFT_BITS 8
#define RC_TOP_BITS 24
#define RC_TOP_VALUE (1 << RC_TOP_BITS)
#define RC_BIT_MODEL_TOTAL_BITS 11
#define RC_BIT_MODEL_TOTAL (1 << RC_BIT_MODEL_TOTAL_BITS)
#define RC_MOVE_BITS 5
/*
* Maximum number of position states. A position state is the lowest pb
* number of bits of the current uncompressed offset. In some places there
* are different sets of probabilities for different position states.
*/
#define POS_STATES_MAX (1 << 4)
/*
* This enum is used to track which LZMA symbols have occurred most recently
* and in which order. This information is used to predict the next symbol.
*
* Symbols:
* - Literal: One 8-bit byte
* - Match: Repeat a chunk of data at some distance
* - Long repeat: Multi-byte match at a recently seen distance
* - Short repeat: One-byte repeat at a recently seen distance
*
* The symbol names are in from STATE_oldest_older_previous. REP means
* either short or long repeated match, and NONLIT means any non-literal.
*/
enum lzma_state {
STATE_LIT_LIT,
STATE_MATCH_LIT_LIT,
STATE_REP_LIT_LIT,
STATE_SHORTREP_LIT_LIT,
STATE_MATCH_LIT,
STATE_REP_LIT,
STATE_SHORTREP_LIT,
STATE_LIT_MATCH,
STATE_LIT_LONGREP,
STATE_LIT_SHORTREP,
STATE_NONLIT_MATCH,
STATE_NONLIT_REP
};
/* Total number of states */
#define STATES 12
/* The lowest 7 states indicate that the previous state was a literal. */
#define LIT_STATES 7
/* Indicate that the latest symbol was a literal. */
static inline void XZ_FUNC lzma_state_literal(enum lzma_state *state)
{
if (*state <= STATE_SHORTREP_LIT_LIT)
*state = STATE_LIT_LIT;
else if (*state <= STATE_LIT_SHORTREP)
*state -= 3;
else
*state -= 6;
}
/* Indicate that the latest symbol was a match. */
static inline void XZ_FUNC lzma_state_match(enum lzma_state *state)
{
*state = *state < LIT_STATES ? STATE_LIT_MATCH : STATE_NONLIT_MATCH;
}
/* Indicate that the latest state was a long repeated match. */
static inline void XZ_FUNC lzma_state_long_rep(enum lzma_state *state)
{
*state = *state < LIT_STATES ? STATE_LIT_LONGREP : STATE_NONLIT_REP;
}
/* Indicate that the latest symbol was a short match. */
static inline void XZ_FUNC lzma_state_short_rep(enum lzma_state *state)
{
*state = *state < LIT_STATES ? STATE_LIT_SHORTREP : STATE_NONLIT_REP;
}
/* Test if the previous symbol was a literal. */
static inline bool XZ_FUNC lzma_state_is_literal(enum lzma_state state)
{
return state < LIT_STATES;
}
/* Each literal coder is divided in three sections:
* - 0x001-0x0FF: Without match byte
* - 0x101-0x1FF: With match byte; match bit is 0
* - 0x201-0x2FF: With match byte; match bit is 1
*
* Match byte is used when the previous LZMA symbol was something else than
* a literal (that is, it was some kind of match).
*/
#define LITERAL_CODER_SIZE 0x300
/* Maximum number of literal coders */
#define LITERAL_CODERS_MAX (1 << 4)
/* Minimum length of a match is two bytes. */
#define MATCH_LEN_MIN 2
/* Match length is encoded with 4, 5, or 10 bits.
*
* Length Bits
* 2-9 4 = Choice=0 + 3 bits
* 10-17 5 = Choice=1 + Choice2=0 + 3 bits
* 18-273 10 = Choice=1 + Choice2=1 + 8 bits
*/
#define LEN_LOW_BITS 3
#define LEN_LOW_SYMBOLS (1 << LEN_LOW_BITS)
#define LEN_MID_BITS 3
#define LEN_MID_SYMBOLS (1 << LEN_MID_BITS)
#define LEN_HIGH_BITS 8
#define LEN_HIGH_SYMBOLS (1 << LEN_HIGH_BITS)
#define LEN_SYMBOLS (LEN_LOW_SYMBOLS + LEN_MID_SYMBOLS + LEN_HIGH_SYMBOLS)
/*
* Maximum length of a match is 273 which is a result of the encoding
* described above.
*/
#define MATCH_LEN_MAX (MATCH_LEN_MIN + LEN_SYMBOLS - 1)
/*
* Different sets of probabilities are used for match distances that have
* very short match length: Lengths of 2, 3, and 4 bytes have a separate
* set of probabilities for each length. The matches with longer length
* use a shared set of probabilities.
*/
#define DIST_STATES 4
/*
* Get the index of the appropriate probability array for decoding
* the distance slot.
*/
static inline uint32_t XZ_FUNC lzma_get_dist_state(uint32_t len)
{
return len < DIST_STATES + MATCH_LEN_MIN
? len - MATCH_LEN_MIN : DIST_STATES - 1;
}
/*
* The highest two bits of a 32-bit match distance are encoded using six bits.
* This six-bit value is called a distance slot. This way encoding a 32-bit
* value takes 6-36 bits, larger values taking more bits.
*/
#define DIST_SLOT_BITS 6
#define DIST_SLOTS (1 << DIST_SLOT_BITS)
/* Match distances up to 127 are fully encoded using probabilities. Since
* the highest two bits (distance slot) are always encoded using six bits,
* the distances 0-3 don't need any additional bits to encode, since the
* distance slot itself is the same as the actual distance. DIST_MODEL_START
* indicates the first distance slot where at least one additional bit is
* needed.
*/
#define DIST_MODEL_START 4
/*
* Match distances greater than 127 are encoded in three pieces:
* - distance slot: the highest two bits
* - direct bits: 2-26 bits below the highest two bits
* - alignment bits: four lowest bits
*
* Direct bits don't use any probabilities.
*
* The distance slot value of 14 is for distances 128-191.
*/
#define DIST_MODEL_END 14
/* Distance slots that indicate a distance <= 127. */
#define FULL_DISTANCES_BITS (DIST_MODEL_END / 2)
#define FULL_DISTANCES (1 << FULL_DISTANCES_BITS)
/*
* For match distances greater than 127, only the highest two bits and the
* lowest four bits (alignment) is encoded using probabilities.
*/
#define ALIGN_BITS 4
#define ALIGN_SIZE (1 << ALIGN_BITS)
#define ALIGN_MASK (ALIGN_SIZE - 1)
/* Total number of all probability variables */
#define PROBS_TOTAL (1846 + LITERAL_CODERS_MAX * LITERAL_CODER_SIZE)
/*
* LZMA remembers the four most recent match distances. Reusing these
* distances tends to take less space than re-encoding the actual
* distance value.
*/
#define REPS 4
#endif
-159
View File
@@ -1,159 +0,0 @@
/*
* Private includes and definitions
*
* Author: Lasse Collin <lasse.collin@tukaani.org>
*
* This file has been put into the public domain.
* You can do whatever you want with this file.
*/
#ifndef XZ_PRIVATE_H
#define XZ_PRIVATE_H
#ifdef __KERNEL__
/* XZ_PREBOOT may be defined only via decompress_unxz.c. */
# ifndef XZ_PREBOOT
# include <linux/slab.h>
# include <linux/vmalloc.h>
# include <linux/string.h>
# define memeq(a, b, size) (memcmp(a, b, size) == 0)
# define memzero(buf, size) memset(buf, 0, size)
# endif
# include <asm/byteorder.h>
# include <asm/unaligned.h>
# define get_le32(p) le32_to_cpup((const uint32_t *)(p))
/* XZ_IGNORE_KCONFIG may be defined only via decompress_unxz.c. */
# ifndef XZ_IGNORE_KCONFIG
# ifdef CONFIG_XZ_DEC_X86
# define XZ_DEC_X86
# endif
# ifdef CONFIG_XZ_DEC_POWERPC
# define XZ_DEC_POWERPC
# endif
# ifdef CONFIG_XZ_DEC_IA64
# define XZ_DEC_IA64
# endif
# ifdef CONFIG_XZ_DEC_ARM
# define XZ_DEC_ARM
# endif
# ifdef CONFIG_XZ_DEC_ARMTHUMB
# define XZ_DEC_ARMTHUMB
# endif
# ifdef CONFIG_XZ_DEC_SPARC
# define XZ_DEC_SPARC
# endif
# endif
# include <linux/xz.h>
#else
/*
* For userspace builds, use a separate header to define the required
* macros and functions. This makes it easier to adapt the code into
* different environments and avoids clutter in the Linux kernel tree.
*/
# include "xz_config.h"
#endif
/* If no specific decoding mode is requested, enable support for all modes. */
#if !defined(XZ_DEC_SINGLE) && !defined(XZ_DEC_PREALLOC) \
&& !defined(XZ_DEC_DYNALLOC)
# define XZ_DEC_SINGLE
# define XZ_DEC_PREALLOC
# define XZ_DEC_DYNALLOC
#endif
/*
* The DEC_IS_foo(mode) macros are used in "if" statements. If only some
* of the supported modes are enabled, these macros will evaluate to true or
* false at compile time and thus allow the compiler to omit unneeded code.
*/
#ifdef XZ_DEC_SINGLE
# define DEC_IS_SINGLE(mode) ((mode) == XZ_SINGLE)
#else
# define DEC_IS_SINGLE(mode) (false)
#endif
#ifdef XZ_DEC_PREALLOC
# define DEC_IS_PREALLOC(mode) ((mode) == XZ_PREALLOC)
#else
# define DEC_IS_PREALLOC(mode) (false)
#endif
#ifdef XZ_DEC_DYNALLOC
# define DEC_IS_DYNALLOC(mode) ((mode) == XZ_DYNALLOC)
#else
# define DEC_IS_DYNALLOC(mode) (false)
#endif
#if !defined(XZ_DEC_SINGLE)
# define DEC_IS_MULTI(mode) (true)
#elif defined(XZ_DEC_PREALLOC) || defined(XZ_DEC_DYNALLOC)
# define DEC_IS_MULTI(mode) ((mode) != XZ_SINGLE)
#else
# define DEC_IS_MULTI(mode) (false)
#endif
/*
* If any of the BCJ filter decoders are wanted, define XZ_DEC_BCJ.
* XZ_DEC_BCJ is used to enable generic support for BCJ decoders.
*/
#ifndef XZ_DEC_BCJ
# if defined(XZ_DEC_X86) || defined(XZ_DEC_POWERPC) \
|| defined(XZ_DEC_IA64) || defined(XZ_DEC_ARM) \
|| defined(XZ_DEC_ARM) || defined(XZ_DEC_ARMTHUMB) \
|| defined(XZ_DEC_SPARC)
# define XZ_DEC_BCJ
# endif
#endif
/*
* Allocate memory for LZMA2 decoder. xz_dec_lzma2_reset() must be used
* before calling xz_dec_lzma2_run().
*/
XZ_EXTERN struct xz_dec_lzma2 * XZ_FUNC xz_dec_lzma2_create(
enum xz_mode mode, uint32_t dict_max);
/*
* Decode the LZMA2 properties (one byte) and reset the decoder. Return
* XZ_OK on success, XZ_MEMLIMIT_ERROR if the preallocated dictionary is not
* big enough, and XZ_OPTIONS_ERROR if props indicates something that this
* decoder doesn't support.
*/
XZ_EXTERN enum xz_ret XZ_FUNC xz_dec_lzma2_reset(
struct xz_dec_lzma2 *s, uint8_t props);
/* Decode raw LZMA2 stream from b->in to b->out. */
XZ_EXTERN enum xz_ret XZ_FUNC xz_dec_lzma2_run(
struct xz_dec_lzma2 *s, struct xz_buf *b);
/* Free the memory allocated for the LZMA2 decoder. */
XZ_EXTERN void XZ_FUNC xz_dec_lzma2_end(struct xz_dec_lzma2 *s);
#ifdef XZ_DEC_BCJ
/*
* Allocate memory for BCJ decoders. xz_dec_bcj_reset() must be used before
* calling xz_dec_bcj_run().
*/
XZ_EXTERN struct xz_dec_bcj * XZ_FUNC xz_dec_bcj_create(bool single_call);
/*
* Decode the Filter ID of a BCJ filter. This implementation doesn't
* support custom start offsets, so no decoding of Filter Properties
* is needed. Returns XZ_OK if the given Filter ID is supported.
* Otherwise XZ_OPTIONS_ERROR is returned.
*/
XZ_EXTERN enum xz_ret XZ_FUNC xz_dec_bcj_reset(
struct xz_dec_bcj *s, uint8_t id);
/*
* Decode raw BCJ + LZMA2 stream. This must be used only if there actually is
* a BCJ filter in the chain. If the chain has only LZMA2, xz_dec_lzma2_run()
* must be called directly.
*/
XZ_EXTERN enum xz_ret XZ_FUNC xz_dec_bcj_run(struct xz_dec_bcj *s,
struct xz_dec_lzma2 *lzma2, struct xz_buf *b);
/* Free the memory allocated for the BCJ filters. */
#define xz_dec_bcj_end(s) kfree(s)
#endif
#endif
-57
View File
@@ -1,57 +0,0 @@
/*
* Definitions for handling the .xz file format
*
* Author: Lasse Collin <lasse.collin@tukaani.org>
*
* This file has been put into the public domain.
* You can do whatever you want with this file.
*/
#ifndef XZ_STREAM_H
#define XZ_STREAM_H
#if defined(__KERNEL__) && !XZ_INTERNAL_CRC32
# include <linux/crc32.h>
# undef crc32
# define xz_crc32(buf, size, crc) \
(~crc32_le(~(uint32_t)(crc), buf, size))
#endif
/*
* See the .xz file format specification at
* http://tukaani.org/xz/xz-file-format.txt
* to understand the container format.
*/
#define STREAM_HEADER_SIZE 12
#define HEADER_MAGIC "\3757zXZ\0"
#define HEADER_MAGIC_SIZE 6
#define FOOTER_MAGIC "YZ"
#define FOOTER_MAGIC_SIZE 2
/*
* Variable-length integer can hold a 63-bit unsigned integer, or a special
* value to indicate that the value is unknown.
*/
typedef uint64_t vli_type;
#define VLI_MAX ((vli_type)-1 / 2)
#define VLI_UNKNOWN ((vli_type)-1)
/* Maximum encoded size of a VLI */
#define VLI_BYTES_MAX (sizeof(vli_type) * 8 / 7)
/* Integrity Check types */
enum xz_check {
XZ_CHECK_NONE = 0,
XZ_CHECK_CRC32 = 1,
XZ_CHECK_CRC64 = 4,
XZ_CHECK_SHA256 = 10
};
/* Maximum possible Check ID */
#define XZ_CHECK_MAX 15
#endif
-35
View File
@@ -1,35 +0,0 @@
/* LZO1X-1 compression
This file is part of the LZO real-time data compression library.
Copyright (C) 1996..2008 Markus Franz Xaver Johannes Oberhumer
All Rights Reserved.
Markus F.X.J. Oberhumer <markus@oberhumer.com>
http://www.oberhumer.com/opensource/lzo/
The LZO library is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
The LZO library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with the LZO library; see the file COPYING.
If not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include "libbb.h"
#include "liblzo.h"
#define D_BITS 14
#define D_INDEX1(d,p) d = DM(DMUL(0x21,DX3(p,5,5,6)) >> 5)
#define D_INDEX2(d,p) d = (d & (D_MASK & 0x7ff)) ^ (D_HIGH | 0x1f)
#define DO_COMPRESS lzo1x_1_compress
#include "lzo1x_c.c"
-35
View File
@@ -1,35 +0,0 @@
/* LZO1X-1(15) compression
This file is part of the LZO real-time data compression library.
Copyright (C) 1996..2008 Markus Franz Xaver Johannes Oberhumer
All Rights Reserved.
Markus F.X.J. Oberhumer <markus@oberhumer.com>
http://www.oberhumer.com/opensource/lzo/
The LZO library is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
The LZO library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with the LZO library; see the file COPYING.
If not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include "libbb.h"
#include "liblzo.h"
#define D_BITS 15
#define D_INDEX1(d,p) d = DM(DMUL(0x21,DX3(p,5,5,6)) >> 5)
#define D_INDEX2(d,p) d = (d & (D_MASK & 0x7ff)) ^ (D_HIGH | 0x1f)
#define DO_COMPRESS lzo1x_1_15_compress
#include "lzo1x_c.c"
-922
View File
@@ -1,922 +0,0 @@
/* lzo1x_9x.c -- implementation of the LZO1X-999 compression algorithm
This file is part of the LZO real-time data compression library.
Copyright (C) 2008 Markus Franz Xaver Johannes Oberhumer
Copyright (C) 2007 Markus Franz Xaver Johannes Oberhumer
Copyright (C) 2006 Markus Franz Xaver Johannes Oberhumer
Copyright (C) 2005 Markus Franz Xaver Johannes Oberhumer
Copyright (C) 2004 Markus Franz Xaver Johannes Oberhumer
Copyright (C) 2003 Markus Franz Xaver Johannes Oberhumer
Copyright (C) 2002 Markus Franz Xaver Johannes Oberhumer
Copyright (C) 2001 Markus Franz Xaver Johannes Oberhumer
Copyright (C) 2000 Markus Franz Xaver Johannes Oberhumer
Copyright (C) 1999 Markus Franz Xaver Johannes Oberhumer
Copyright (C) 1998 Markus Franz Xaver Johannes Oberhumer
Copyright (C) 1997 Markus Franz Xaver Johannes Oberhumer
Copyright (C) 1996 Markus Franz Xaver Johannes Oberhumer
All Rights Reserved.
The LZO library is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
The LZO library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with the LZO library; see the file COPYING.
If not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
Markus F.X.J. Oberhumer
<markus@oberhumer.com>
http://www.oberhumer.com/opensource/lzo/
*/
#include "libbb.h"
/* The following is probably only safe on Intel-compatible processors ... */
#define LZO_UNALIGNED_OK_2
#define LZO_UNALIGNED_OK_4
#include "liblzo.h"
#define LZO_MAX(a,b) ((a) >= (b) ? (a) : (b))
#define LZO_MIN(a,b) ((a) <= (b) ? (a) : (b))
#define LZO_MAX3(a,b,c) ((a) >= (b) ? LZO_MAX(a,c) : LZO_MAX(b,c))
/***********************************************************************
//
************************************************************************/
#define SWD_N M4_MAX_OFFSET /* size of ring buffer */
#define SWD_F 2048 /* upper limit for match length */
#define SWD_BEST_OFF (LZO_MAX3(M2_MAX_LEN, M3_MAX_LEN, M4_MAX_LEN) + 1)
typedef struct {
int init;
unsigned look; /* bytes in lookahead buffer */
unsigned m_len;
unsigned m_off;
const uint8_t *bp;
const uint8_t *ip;
const uint8_t *in;
const uint8_t *in_end;
uint8_t *out;
unsigned r1_lit;
} lzo1x_999_t;
#define getbyte(c) ((c).ip < (c).in_end ? *((c).ip)++ : (-1))
/* lzo_swd.c -- sliding window dictionary */
/***********************************************************************
//
************************************************************************/
#define SWD_UINT_MAX USHRT_MAX
#ifndef SWD_HSIZE
# define SWD_HSIZE 16384
#endif
#ifndef SWD_MAX_CHAIN
# define SWD_MAX_CHAIN 2048
#endif
#define HEAD3(b, p) \
( ((0x9f5f * ((((b[p]<<5)^b[p+1])<<5) ^ b[p+2])) >> 5) & (SWD_HSIZE-1) )
#if defined(LZO_UNALIGNED_OK_2)
# define HEAD2(b,p) (* (uint16_t *) &(b[p]))
#else
# define HEAD2(b,p) (b[p] ^ ((unsigned)b[p+1]<<8))
#endif
#define NIL2 SWD_UINT_MAX
typedef struct lzo_swd {
/* public - "built-in" */
/* public - configuration */
unsigned max_chain;
int use_best_off;
/* public - output */
unsigned m_len;
unsigned m_off;
unsigned look;
int b_char;
#if defined(SWD_BEST_OFF)
unsigned best_off[SWD_BEST_OFF];
#endif
/* semi public */
lzo1x_999_t *c;
unsigned m_pos;
#if defined(SWD_BEST_OFF)
unsigned best_pos[SWD_BEST_OFF];
#endif
/* private */
unsigned ip; /* input pointer (lookahead) */
unsigned bp; /* buffer pointer */
unsigned rp; /* remove pointer */
unsigned node_count;
unsigned first_rp;
uint8_t b[SWD_N + SWD_F];
uint8_t b_wrap[SWD_F]; /* must follow b */
uint16_t head3[SWD_HSIZE];
uint16_t succ3[SWD_N + SWD_F];
uint16_t best3[SWD_N + SWD_F];
uint16_t llen3[SWD_HSIZE];
#ifdef HEAD2
uint16_t head2[65536L];
#endif
} lzo_swd_t, *lzo_swd_p;
#define SIZEOF_LZO_SWD_T (sizeof(lzo_swd_t))
/* Access macro for head3.
* head3[key] may be uninitialized, but then its value will never be used.
*/
#define s_get_head3(s,key) s->head3[key]
/***********************************************************************
//
************************************************************************/
#define B_SIZE (SWD_N + SWD_F)
static int swd_init(lzo_swd_p s)
{
/* defaults */
s->node_count = SWD_N;
memset(s->llen3, 0, sizeof(s->llen3[0]) * (unsigned)SWD_HSIZE);
#ifdef HEAD2
memset(s->head2, 0xff, sizeof(s->head2[0]) * 65536L);
assert(s->head2[0] == NIL2);
#endif
s->ip = 0;
s->bp = s->ip;
s->first_rp = s->ip;
assert(s->ip + SWD_F <= B_SIZE);
s->look = (unsigned) (s->c->in_end - s->c->ip);
if (s->look > 0) {
if (s->look > SWD_F)
s->look = SWD_F;
memcpy(&s->b[s->ip], s->c->ip, s->look);
s->c->ip += s->look;
s->ip += s->look;
}
if (s->ip == B_SIZE)
s->ip = 0;
s->rp = s->first_rp;
if (s->rp >= s->node_count)
s->rp -= s->node_count;
else
s->rp += B_SIZE - s->node_count;
return LZO_E_OK;
}
#define swd_pos2off(s,pos) \
(s->bp > (pos) ? s->bp - (pos) : B_SIZE - ((pos) - s->bp))
/***********************************************************************
//
************************************************************************/
static void swd_getbyte(lzo_swd_p s)
{
int c;
if ((c = getbyte(*(s->c))) < 0) {
if (s->look > 0)
--s->look;
} else {
s->b[s->ip] = c;
if (s->ip < SWD_F)
s->b_wrap[s->ip] = c;
}
if (++s->ip == B_SIZE)
s->ip = 0;
if (++s->bp == B_SIZE)
s->bp = 0;
if (++s->rp == B_SIZE)
s->rp = 0;
}
/***********************************************************************
// remove node from lists
************************************************************************/
static void swd_remove_node(lzo_swd_p s, unsigned node)
{
if (s->node_count == 0) {
unsigned key;
key = HEAD3(s->b,node);
assert(s->llen3[key] > 0);
--s->llen3[key];
#ifdef HEAD2
key = HEAD2(s->b,node);
assert(s->head2[key] != NIL2);
if ((unsigned) s->head2[key] == node)
s->head2[key] = NIL2;
#endif
} else
--s->node_count;
}
/***********************************************************************
//
************************************************************************/
static void swd_accept(lzo_swd_p s, unsigned n)
{
assert(n <= s->look);
while (n--) {
unsigned key;
swd_remove_node(s,s->rp);
/* add bp into HEAD3 */
key = HEAD3(s->b, s->bp);
s->succ3[s->bp] = s_get_head3(s, key);
s->head3[key] = s->bp;
s->best3[s->bp] = SWD_F + 1;
s->llen3[key]++;
assert(s->llen3[key] <= SWD_N);
#ifdef HEAD2
/* add bp into HEAD2 */
key = HEAD2(s->b, s->bp);
s->head2[key] = s->bp;
#endif
swd_getbyte(s);
}
}
/***********************************************************************
//
************************************************************************/
static void swd_search(lzo_swd_p s, unsigned node, unsigned cnt)
{
const uint8_t *p1;
const uint8_t *p2;
const uint8_t *px;
unsigned m_len = s->m_len;
const uint8_t *b = s->b;
const uint8_t *bp = s->b + s->bp;
const uint8_t *bx = s->b + s->bp + s->look;
unsigned char scan_end1;
assert(s->m_len > 0);
scan_end1 = bp[m_len - 1];
for ( ; cnt-- > 0; node = s->succ3[node]) {
p1 = bp;
p2 = b + node;
px = bx;
assert(m_len < s->look);
if (p2[m_len - 1] == scan_end1
&& p2[m_len] == p1[m_len]
&& p2[0] == p1[0]
&& p2[1] == p1[1]
) {
unsigned i;
assert(lzo_memcmp(bp, &b[node], 3) == 0);
p1 += 2; p2 += 2;
do {} while (++p1 < px && *p1 == *++p2);
i = p1-bp;
assert(lzo_memcmp(bp, &b[node], i) == 0);
#if defined(SWD_BEST_OFF)
if (i < SWD_BEST_OFF) {
if (s->best_pos[i] == 0)
s->best_pos[i] = node + 1;
}
#endif
if (i > m_len) {
s->m_len = m_len = i;
s->m_pos = node;
if (m_len == s->look)
return;
if (m_len >= SWD_F)
return;
if (m_len > (unsigned) s->best3[node])
return;
scan_end1 = bp[m_len - 1];
}
}
}
}
/***********************************************************************
//
************************************************************************/
#ifdef HEAD2
static int swd_search2(lzo_swd_p s)
{
unsigned key;
assert(s->look >= 2);
assert(s->m_len > 0);
key = s->head2[HEAD2(s->b, s->bp)];
if (key == NIL2)
return 0;
assert(lzo_memcmp(&s->b[s->bp], &s->b[key], 2) == 0);
#if defined(SWD_BEST_OFF)
if (s->best_pos[2] == 0)
s->best_pos[2] = key + 1;
#endif
if (s->m_len < 2) {
s->m_len = 2;
s->m_pos = key;
}
return 1;
}
#endif
/***********************************************************************
//
************************************************************************/
static void swd_findbest(lzo_swd_p s)
{
unsigned key;
unsigned cnt, node;
unsigned len;
assert(s->m_len > 0);
/* get current head, add bp into HEAD3 */
key = HEAD3(s->b,s->bp);
node = s->succ3[s->bp] = s_get_head3(s, key);
cnt = s->llen3[key]++;
assert(s->llen3[key] <= SWD_N + SWD_F);
if (cnt > s->max_chain)
cnt = s->max_chain;
s->head3[key] = s->bp;
s->b_char = s->b[s->bp];
len = s->m_len;
if (s->m_len >= s->look) {
if (s->look == 0)
s->b_char = -1;
s->m_off = 0;
s->best3[s->bp] = SWD_F + 1;
} else {
#ifdef HEAD2
if (swd_search2(s))
#endif
if (s->look >= 3)
swd_search(s, node, cnt);
if (s->m_len > len)
s->m_off = swd_pos2off(s,s->m_pos);
s->best3[s->bp] = s->m_len;
#if defined(SWD_BEST_OFF)
if (s->use_best_off) {
int i;
for (i = 2; i < SWD_BEST_OFF; i++) {
if (s->best_pos[i] > 0)
s->best_off[i] = swd_pos2off(s, s->best_pos[i]-1);
else
s->best_off[i] = 0;
}
}
#endif
}
swd_remove_node(s,s->rp);
#ifdef HEAD2
/* add bp into HEAD2 */
key = HEAD2(s->b, s->bp);
s->head2[key] = s->bp;
#endif
}
#undef HEAD3
#undef HEAD2
#undef s_get_head3
/***********************************************************************
//
************************************************************************/
static int init_match(lzo1x_999_t *c, lzo_swd_p s, uint32_t use_best_off)
{
int r;
assert(!c->init);
c->init = 1;
s->c = c;
r = swd_init(s);
if (r != 0)
return r;
s->use_best_off = use_best_off;
return r;
}
/***********************************************************************
//
************************************************************************/
static int find_match(lzo1x_999_t *c, lzo_swd_p s,
unsigned this_len, unsigned skip)
{
assert(c->init);
if (skip > 0) {
assert(this_len >= skip);
swd_accept(s, this_len - skip);
} else {
assert(this_len <= 1);
}
s->m_len = 1;
s->m_len = 1;
#ifdef SWD_BEST_OFF
if (s->use_best_off)
memset(s->best_pos, 0, sizeof(s->best_pos));
#endif
swd_findbest(s);
c->m_len = s->m_len;
c->m_off = s->m_off;
swd_getbyte(s);
if (s->b_char < 0) {
c->look = 0;
c->m_len = 0;
} else {
c->look = s->look + 1;
}
c->bp = c->ip - c->look;
return LZO_E_OK;
}
/* this is a public functions, but there is no prototype in a header file */
static int lzo1x_999_compress_internal(const uint8_t *in , unsigned in_len,
uint8_t *out, unsigned *out_len,
void *wrkmem,
unsigned good_length,
unsigned max_lazy,
unsigned max_chain,
uint32_t use_best_off);
/***********************************************************************
//
************************************************************************/
static uint8_t *code_match(lzo1x_999_t *c,
uint8_t *op, unsigned m_len, unsigned m_off)
{
assert(op > c->out);
if (m_len == 2) {
assert(m_off <= M1_MAX_OFFSET);
assert(c->r1_lit > 0);
assert(c->r1_lit < 4);
m_off -= 1;
*op++ = M1_MARKER | ((m_off & 3) << 2);
*op++ = m_off >> 2;
} else if (m_len <= M2_MAX_LEN && m_off <= M2_MAX_OFFSET) {
assert(m_len >= 3);
m_off -= 1;
*op++ = ((m_len - 1) << 5) | ((m_off & 7) << 2);
*op++ = m_off >> 3;
assert(op[-2] >= M2_MARKER);
} else if (m_len == M2_MIN_LEN && m_off <= MX_MAX_OFFSET && c->r1_lit >= 4) {
assert(m_len == 3);
assert(m_off > M2_MAX_OFFSET);
m_off -= 1 + M2_MAX_OFFSET;
*op++ = M1_MARKER | ((m_off & 3) << 2);
*op++ = m_off >> 2;
} else if (m_off <= M3_MAX_OFFSET) {
assert(m_len >= 3);
m_off -= 1;
if (m_len <= M3_MAX_LEN)
*op++ = M3_MARKER | (m_len - 2);
else {
m_len -= M3_MAX_LEN;
*op++ = M3_MARKER | 0;
while (m_len > 255) {
m_len -= 255;
*op++ = 0;
}
assert(m_len > 0);
*op++ = m_len;
}
*op++ = m_off << 2;
*op++ = m_off >> 6;
} else {
unsigned k;
assert(m_len >= 3);
assert(m_off > 0x4000);
assert(m_off <= 0xbfff);
m_off -= 0x4000;
k = (m_off & 0x4000) >> 11;
if (m_len <= M4_MAX_LEN)
*op++ = M4_MARKER | k | (m_len - 2);
else {
m_len -= M4_MAX_LEN;
*op++ = M4_MARKER | k | 0;
while (m_len > 255) {
m_len -= 255;
*op++ = 0;
}
assert(m_len > 0);
*op++ = m_len;
}
*op++ = m_off << 2;
*op++ = m_off >> 6;
}
return op;
}
static uint8_t *STORE_RUN(lzo1x_999_t *c, uint8_t *op,
const uint8_t *ii, unsigned t)
{
if (op == c->out && t <= 238) {
*op++ = 17 + t;
} else if (t <= 3) {
op[-2] |= t;
} else if (t <= 18) {
*op++ = t - 3;
} else {
unsigned tt = t - 18;
*op++ = 0;
while (tt > 255) {
tt -= 255;
*op++ = 0;
}
assert(tt > 0);
*op++ = tt;
}
do *op++ = *ii++; while (--t > 0);
return op;
}
static uint8_t *code_run(lzo1x_999_t *c, uint8_t *op, const uint8_t *ii,
unsigned lit)
{
if (lit > 0) {
assert(m_len >= 2);
op = STORE_RUN(c, op, ii, lit);
} else {
assert(m_len >= 3);
}
c->r1_lit = lit;
return op;
}
/***********************************************************************
//
************************************************************************/
static int len_of_coded_match(unsigned m_len, unsigned m_off, unsigned lit)
{
int n = 4;
if (m_len < 2)
return -1;
if (m_len == 2)
return (m_off <= M1_MAX_OFFSET && lit > 0 && lit < 4) ? 2 : -1;
if (m_len <= M2_MAX_LEN && m_off <= M2_MAX_OFFSET)
return 2;
if (m_len == M2_MIN_LEN && m_off <= MX_MAX_OFFSET && lit >= 4)
return 2;
if (m_off <= M3_MAX_OFFSET) {
if (m_len <= M3_MAX_LEN)
return 3;
m_len -= M3_MAX_LEN;
} else if (m_off <= M4_MAX_OFFSET) {
if (m_len <= M4_MAX_LEN)
return 3;
m_len -= M4_MAX_LEN;
} else
return -1;
while (m_len > 255) {
m_len -= 255;
n++;
}
return n;
}
static int min_gain(unsigned ahead, unsigned lit1,
unsigned lit2, int l1, int l2, int l3)
{
int lazy_match_min_gain = 0;
assert (ahead >= 1);
lazy_match_min_gain += ahead;
if (lit1 <= 3)
lazy_match_min_gain += (lit2 <= 3) ? 0 : 2;
else if (lit1 <= 18)
lazy_match_min_gain += (lit2 <= 18) ? 0 : 1;
lazy_match_min_gain += (l2 - l1) * 2;
if (l3 > 0)
lazy_match_min_gain -= (ahead - l3) * 2;
if (lazy_match_min_gain < 0)
lazy_match_min_gain = 0;
return lazy_match_min_gain;
}
/***********************************************************************
//
************************************************************************/
#if defined(SWD_BEST_OFF)
static void better_match(const lzo_swd_p swd,
unsigned *m_len, unsigned *m_off)
{
if (*m_len <= M2_MIN_LEN)
return;
if (*m_off <= M2_MAX_OFFSET)
return;
/* M3/M4 -> M2 */
if (*m_off > M2_MAX_OFFSET
&& *m_len >= M2_MIN_LEN + 1 && *m_len <= M2_MAX_LEN + 1
&& swd->best_off[*m_len-1] && swd->best_off[*m_len-1] <= M2_MAX_OFFSET
) {
*m_len = *m_len - 1;
*m_off = swd->best_off[*m_len];
return;
}
/* M4 -> M2 */
if (*m_off > M3_MAX_OFFSET
&& *m_len >= M4_MAX_LEN + 1 && *m_len <= M2_MAX_LEN + 2
&& swd->best_off[*m_len-2] && swd->best_off[*m_len-2] <= M2_MAX_OFFSET
) {
*m_len = *m_len - 2;
*m_off = swd->best_off[*m_len];
return;
}
/* M4 -> M3 */
if (*m_off > M3_MAX_OFFSET
&& *m_len >= M4_MAX_LEN + 1 && *m_len <= M3_MAX_LEN + 1
&& swd->best_off[*m_len-1] && swd->best_off[*m_len-1] <= M3_MAX_OFFSET
) {
*m_len = *m_len - 1;
*m_off = swd->best_off[*m_len];
}
}
#endif
/***********************************************************************
//
************************************************************************/
static int lzo1x_999_compress_internal(const uint8_t *in, unsigned in_len,
uint8_t *out, unsigned *out_len,
void *wrkmem,
unsigned good_length,
unsigned max_lazy,
unsigned max_chain,
uint32_t use_best_off)
{
uint8_t *op;
const uint8_t *ii;
unsigned lit;
unsigned m_len, m_off;
lzo1x_999_t cc;
lzo1x_999_t *const c = &cc;
const lzo_swd_p swd = (lzo_swd_p) wrkmem;
int r;
c->init = 0;
c->ip = c->in = in;
c->in_end = in + in_len;
c->out = out;
op = out;
ii = c->ip; /* point to start of literal run */
lit = 0;
c->r1_lit = 0;
r = init_match(c, swd, use_best_off);
if (r != 0)
return r;
swd->max_chain = max_chain;
r = find_match(c, swd, 0, 0);
if (r != 0)
return r;
while (c->look > 0) {
unsigned ahead;
unsigned max_ahead;
int l1, l2, l3;
m_len = c->m_len;
m_off = c->m_off;
assert(c->bp == c->ip - c->look);
assert(c->bp >= in);
if (lit == 0)
ii = c->bp;
assert(ii + lit == c->bp);
assert(swd->b_char == *(c->bp));
if (m_len < 2
|| (m_len == 2 && (m_off > M1_MAX_OFFSET || lit == 0 || lit >= 4))
/* Do not accept this match for compressed-data compatibility
* with LZO v1.01 and before
* [ might be a problem for decompress() and optimize() ]
*/
|| (m_len == 2 && op == out)
|| (op == out && lit == 0)
) {
/* a literal */
m_len = 0;
}
else if (m_len == M2_MIN_LEN) {
/* compression ratio improves if we code a literal in some cases */
if (m_off > MX_MAX_OFFSET && lit >= 4)
m_len = 0;
}
if (m_len == 0) {
/* a literal */
lit++;
swd->max_chain = max_chain;
r = find_match(c, swd, 1, 0);
assert(r == 0);
continue;
}
/* a match */
#if defined(SWD_BEST_OFF)
if (swd->use_best_off)
better_match(swd, &m_len, &m_off);
#endif
/* shall we try a lazy match ? */
ahead = 0;
if (m_len >= max_lazy) {
/* no */
l1 = 0;
max_ahead = 0;
} else {
/* yes, try a lazy match */
l1 = len_of_coded_match(m_len, m_off, lit);
assert(l1 > 0);
max_ahead = LZO_MIN(2, (unsigned)l1 - 1);
}
while (ahead < max_ahead && c->look > m_len) {
int lazy_match_min_gain;
if (m_len >= good_length)
swd->max_chain = max_chain >> 2;
else
swd->max_chain = max_chain;
r = find_match(c, swd, 1, 0);
ahead++;
assert(r == 0);
assert(c->look > 0);
assert(ii + lit + ahead == c->bp);
if (c->m_len < m_len)
continue;
if (c->m_len == m_len && c->m_off >= m_off)
continue;
#if defined(SWD_BEST_OFF)
if (swd->use_best_off)
better_match(swd, &c->m_len, &c->m_off);
#endif
l2 = len_of_coded_match(c->m_len, c->m_off, lit+ahead);
if (l2 < 0)
continue;
/* compressed-data compatibility [see above] */
l3 = (op == out) ? -1 : len_of_coded_match(ahead, m_off, lit);
lazy_match_min_gain = min_gain(ahead, lit, lit+ahead, l1, l2, l3);
if (c->m_len >= m_len + lazy_match_min_gain) {
if (l3 > 0) {
/* code previous run */
op = code_run(c, op, ii, lit);
lit = 0;
/* code shortened match */
op = code_match(c, op, ahead, m_off);
} else {
lit += ahead;
assert(ii + lit == c->bp);
}
goto lazy_match_done;
}
}
assert(ii + lit + ahead == c->bp);
/* 1 - code run */
op = code_run(c, op, ii, lit);
lit = 0;
/* 2 - code match */
op = code_match(c, op, m_len, m_off);
swd->max_chain = max_chain;
r = find_match(c, swd, m_len, 1+ahead);
assert(r == 0);
lazy_match_done: ;
}
/* store final run */
if (lit > 0)
op = STORE_RUN(c, op, ii, lit);
#if defined(LZO_EOF_CODE)
*op++ = M4_MARKER | 1;
*op++ = 0;
*op++ = 0;
#endif
*out_len = op - out;
return LZO_E_OK;
}
/***********************************************************************
//
************************************************************************/
int lzo1x_999_compress_level(const uint8_t *in, unsigned in_len,
uint8_t *out, unsigned *out_len,
void *wrkmem,
int compression_level)
{
static const struct {
uint16_t good_length;
uint16_t max_lazy;
uint16_t max_chain;
uint16_t use_best_off;
} c[3] = {
{ 8, 32, 256, 0 },
{ 32, 128, 2048, 1 },
{ SWD_F, SWD_F, 4096, 1 } /* max. compression */
};
if (compression_level < 7 || compression_level > 9)
return LZO_E_ERROR;
compression_level -= 7;
return lzo1x_999_compress_internal(in, in_len, out, out_len, wrkmem,
c[compression_level].good_length,
c[compression_level].max_lazy,
c[compression_level].max_chain,
c[compression_level].use_best_off);
}
-296
View File
@@ -1,296 +0,0 @@
/* implementation of the LZO1[XY]-1 compression algorithm
This file is part of the LZO real-time data compression library.
Copyright (C) 1996..2008 Markus Franz Xaver Johannes Oberhumer
All Rights Reserved.
Markus F.X.J. Oberhumer <markus@oberhumer.com>
http://www.oberhumer.com/opensource/lzo/
The LZO library is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
The LZO library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with the LZO library; see the file COPYING.
If not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
/***********************************************************************
// compress a block of data.
************************************************************************/
static NOINLINE unsigned
do_compress(const uint8_t* in, unsigned in_len,
uint8_t* out, unsigned* out_len,
void* wrkmem)
{
register const uint8_t* ip;
uint8_t* op;
const uint8_t* const in_end = in + in_len;
const uint8_t* const ip_end = in + in_len - M2_MAX_LEN - 5;
const uint8_t* ii;
const void* *const dict = (const void**) wrkmem;
op = out;
ip = in;
ii = ip;
ip += 4;
for (;;) {
register const uint8_t* m_pos;
unsigned m_off;
unsigned m_len;
unsigned dindex;
D_INDEX1(dindex,ip);
GINDEX(m_pos,m_off,dict,dindex,in);
if (LZO_CHECK_MPOS_NON_DET(m_pos,m_off,in,ip,M4_MAX_OFFSET))
goto literal;
#if 1
if (m_off <= M2_MAX_OFFSET || m_pos[3] == ip[3])
goto try_match;
D_INDEX2(dindex,ip);
#endif
GINDEX(m_pos,m_off,dict,dindex,in);
if (LZO_CHECK_MPOS_NON_DET(m_pos,m_off,in,ip,M4_MAX_OFFSET))
goto literal;
if (m_off <= M2_MAX_OFFSET || m_pos[3] == ip[3])
goto try_match;
goto literal;
try_match:
#if 1 && defined(LZO_UNALIGNED_OK_2)
if (* (const lzo_ushortp) m_pos != * (const lzo_ushortp) ip)
#else
if (m_pos[0] != ip[0] || m_pos[1] != ip[1])
#endif
{
} else {
if (m_pos[2] == ip[2]) {
#if 0
if (m_off <= M2_MAX_OFFSET)
goto match;
if (lit <= 3)
goto match;
if (lit == 3) { /* better compression, but slower */
assert(op - 2 > out); op[-2] |= (uint8_t)(3);
*op++ = *ii++; *op++ = *ii++; *op++ = *ii++;
goto code_match;
}
if (m_pos[3] == ip[3])
#endif
goto match;
}
else {
/* still need a better way for finding M1 matches */
#if 0
/* a M1 match */
#if 0
if (m_off <= M1_MAX_OFFSET && lit > 0 && lit <= 3)
#else
if (m_off <= M1_MAX_OFFSET && lit == 3)
#endif
{
register unsigned t;
t = lit;
assert(op - 2 > out); op[-2] |= (uint8_t)(t);
do *op++ = *ii++; while (--t > 0);
assert(ii == ip);
m_off -= 1;
*op++ = (uint8_t)(M1_MARKER | ((m_off & 3) << 2));
*op++ = (uint8_t)(m_off >> 2);
ip += 2;
goto match_done;
}
#endif
}
}
/* a literal */
literal:
UPDATE_I(dict, 0, dindex, ip, in);
++ip;
if (ip >= ip_end)
break;
continue;
/* a match */
match:
UPDATE_I(dict, 0, dindex, ip, in);
/* store current literal run */
if (pd(ip, ii) > 0) {
register unsigned t = pd(ip, ii);
if (t <= 3) {
assert(op - 2 > out);
op[-2] |= (uint8_t)(t);
}
else if (t <= 18)
*op++ = (uint8_t)(t - 3);
else {
register unsigned tt = t - 18;
*op++ = 0;
while (tt > 255) {
tt -= 255;
*op++ = 0;
}
assert(tt > 0);
*op++ = (uint8_t)(tt);
}
do *op++ = *ii++; while (--t > 0);
}
/* code the match */
assert(ii == ip);
ip += 3;
if (m_pos[3] != *ip++ || m_pos[4] != *ip++ || m_pos[5] != *ip++
|| m_pos[6] != *ip++ || m_pos[7] != *ip++ || m_pos[8] != *ip++
#ifdef LZO1Y
|| m_pos[ 9] != *ip++ || m_pos[10] != *ip++ || m_pos[11] != *ip++
|| m_pos[12] != *ip++ || m_pos[13] != *ip++ || m_pos[14] != *ip++
#endif
) {
--ip;
m_len = pd(ip, ii);
assert(m_len >= 3);
assert(m_len <= M2_MAX_LEN);
if (m_off <= M2_MAX_OFFSET) {
m_off -= 1;
#if defined(LZO1X)
*op++ = (uint8_t)(((m_len - 1) << 5) | ((m_off & 7) << 2));
*op++ = (uint8_t)(m_off >> 3);
#elif defined(LZO1Y)
*op++ = (uint8_t)(((m_len + 1) << 4) | ((m_off & 3) << 2));
*op++ = (uint8_t)(m_off >> 2);
#endif
}
else if (m_off <= M3_MAX_OFFSET) {
m_off -= 1;
*op++ = (uint8_t)(M3_MARKER | (m_len - 2));
goto m3_m4_offset;
} else {
#if defined(LZO1X)
m_off -= 0x4000;
assert(m_off > 0);
assert(m_off <= 0x7fff);
*op++ = (uint8_t)(M4_MARKER | ((m_off & 0x4000) >> 11) | (m_len - 2));
goto m3_m4_offset;
#elif defined(LZO1Y)
goto m4_match;
#endif
}
}
else {
{
const uint8_t* end = in_end;
const uint8_t* m = m_pos + M2_MAX_LEN + 1;
while (ip < end && *m == *ip)
m++, ip++;
m_len = pd(ip, ii);
}
assert(m_len > M2_MAX_LEN);
if (m_off <= M3_MAX_OFFSET) {
m_off -= 1;
if (m_len <= 33)
*op++ = (uint8_t)(M3_MARKER | (m_len - 2));
else {
m_len -= 33;
*op++ = M3_MARKER | 0;
goto m3_m4_len;
}
} else {
#if defined(LZO1Y)
m4_match:
#endif
m_off -= 0x4000;
assert(m_off > 0);
assert(m_off <= 0x7fff);
if (m_len <= M4_MAX_LEN)
*op++ = (uint8_t)(M4_MARKER | ((m_off & 0x4000) >> 11) | (m_len - 2));
else {
m_len -= M4_MAX_LEN;
*op++ = (uint8_t)(M4_MARKER | ((m_off & 0x4000) >> 11));
m3_m4_len:
while (m_len > 255) {
m_len -= 255;
*op++ = 0;
}
assert(m_len > 0);
*op++ = (uint8_t)(m_len);
}
}
m3_m4_offset:
*op++ = (uint8_t)((m_off & 63) << 2);
*op++ = (uint8_t)(m_off >> 6);
}
#if 0
match_done:
#endif
ii = ip;
if (ip >= ip_end)
break;
}
*out_len = pd(op, out);
return pd(in_end, ii);
}
/***********************************************************************
// public entry point
************************************************************************/
int DO_COMPRESS(const uint8_t* in, unsigned in_len,
uint8_t* out, unsigned* out_len,
void* wrkmem)
{
uint8_t* op = out;
unsigned t;
if (in_len <= M2_MAX_LEN + 5)
t = in_len;
else {
t = do_compress(in,in_len,op,out_len,wrkmem);
op += *out_len;
}
if (t > 0) {
const uint8_t* ii = in + in_len - t;
if (op == out && t <= 238)
*op++ = (uint8_t)(17 + t);
else if (t <= 3)
op[-2] |= (uint8_t)(t);
else if (t <= 18)
*op++ = (uint8_t)(t - 3);
else {
unsigned tt = t - 18;
*op++ = 0;
while (tt > 255) {
tt -= 255;
*op++ = 0;
}
assert(tt > 0);
*op++ = (uint8_t)(tt);
}
do *op++ = *ii++; while (--t > 0);
}
*op++ = M4_MARKER | 1;
*op++ = 0;
*op++ = 0;
*out_len = pd(op, out);
return 0; /*LZO_E_OK*/
}
-420
View File
@@ -1,420 +0,0 @@
/* implementation of the LZO1X decompression algorithm
This file is part of the LZO real-time data compression library.
Copyright (C) 1996..2008 Markus Franz Xaver Johannes Oberhumer
All Rights Reserved.
Markus F.X.J. Oberhumer <markus@oberhumer.com>
http://www.oberhumer.com/opensource/lzo/
The LZO library is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
The LZO library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with the LZO library; see the file COPYING.
If not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include "libbb.h"
#include "liblzo.h"
/***********************************************************************
// decompress a block of data.
************************************************************************/
/* safe decompression with overrun testing */
int lzo1x_decompress_safe(const uint8_t* in, unsigned in_len,
uint8_t* out, unsigned* out_len,
void* wrkmem UNUSED_PARAM)
{
register uint8_t* op;
register const uint8_t* ip;
register unsigned t;
#if defined(COPY_DICT)
unsigned m_off;
const uint8_t* dict_end;
#else
register const uint8_t* m_pos = NULL; /* possibly not needed */
#endif
const uint8_t* const ip_end = in + in_len;
#if defined(HAVE_ANY_OP)
uint8_t* const op_end = out + *out_len;
#endif
#if defined(LZO1Z)
unsigned last_m_off = 0;
#endif
// LZO_UNUSED(wrkmem);
#if defined(COPY_DICT)
if (dict) {
if (dict_len > M4_MAX_OFFSET) {
dict += dict_len - M4_MAX_OFFSET;
dict_len = M4_MAX_OFFSET;
}
dict_end = dict + dict_len;
} else {
dict_len = 0;
dict_end = NULL;
}
#endif /* COPY_DICT */
*out_len = 0;
op = out;
ip = in;
if (*ip > 17) {
t = *ip++ - 17;
if (t < 4)
goto match_next;
assert(t > 0); NEED_OP(t); NEED_IP(t+1);
do *op++ = *ip++; while (--t > 0);
goto first_literal_run;
}
while (TEST_IP && TEST_OP) {
t = *ip++;
if (t >= 16)
goto match;
/* a literal run */
if (t == 0) {
NEED_IP(1);
while (*ip == 0) {
t += 255;
ip++;
NEED_IP(1);
}
t += 15 + *ip++;
}
/* copy literals */
assert(t > 0);
NEED_OP(t+3);
NEED_IP(t+4);
#if defined(LZO_UNALIGNED_OK_4) || defined(LZO_ALIGNED_OK_4)
# if !defined(LZO_UNALIGNED_OK_4)
if (PTR_ALIGNED2_4(op, ip))
# endif
{
COPY4(op, ip);
op += 4;
ip += 4;
if (--t > 0) {
if (t >= 4) {
do {
COPY4(op, ip);
op += 4;
ip += 4;
t -= 4;
} while (t >= 4);
if (t > 0)
do *op++ = *ip++; while (--t > 0);
} else {
do *op++ = *ip++; while (--t > 0);
}
}
}
# if !defined(LZO_UNALIGNED_OK_4)
else
# endif
#endif
#if !defined(LZO_UNALIGNED_OK_4)
{
*op++ = *ip++;
*op++ = *ip++;
*op++ = *ip++;
do *op++ = *ip++; while (--t > 0);
}
#endif
first_literal_run:
t = *ip++;
if (t >= 16)
goto match;
#if defined(COPY_DICT)
#if defined(LZO1Z)
m_off = (1 + M2_MAX_OFFSET) + (t << 6) + (*ip++ >> 2);
last_m_off = m_off;
#else
m_off = (1 + M2_MAX_OFFSET) + (t >> 2) + (*ip++ << 2);
#endif
NEED_OP(3);
t = 3; COPY_DICT(t,m_off)
#else /* !COPY_DICT */
#if defined(LZO1Z)
t = (1 + M2_MAX_OFFSET) + (t << 6) + (*ip++ >> 2);
m_pos = op - t;
last_m_off = t;
#else
m_pos = op - (1 + M2_MAX_OFFSET);
m_pos -= t >> 2;
m_pos -= *ip++ << 2;
#endif
TEST_LB(m_pos); NEED_OP(3);
*op++ = *m_pos++;
*op++ = *m_pos++;
*op++ = *m_pos;
#endif /* COPY_DICT */
goto match_done;
/* handle matches */
do {
match:
if (t >= 64) { /* a M2 match */
#if defined(COPY_DICT)
#if defined(LZO1X)
m_off = 1 + ((t >> 2) & 7) + (*ip++ << 3);
t = (t >> 5) - 1;
#elif defined(LZO1Y)
m_off = 1 + ((t >> 2) & 3) + (*ip++ << 2);
t = (t >> 4) - 3;
#elif defined(LZO1Z)
m_off = t & 0x1f;
if (m_off >= 0x1c)
m_off = last_m_off;
else {
m_off = 1 + (m_off << 6) + (*ip++ >> 2);
last_m_off = m_off;
}
t = (t >> 5) - 1;
#endif
#else /* !COPY_DICT */
#if defined(LZO1X)
m_pos = op - 1;
m_pos -= (t >> 2) & 7;
m_pos -= *ip++ << 3;
t = (t >> 5) - 1;
#elif defined(LZO1Y)
m_pos = op - 1;
m_pos -= (t >> 2) & 3;
m_pos -= *ip++ << 2;
t = (t >> 4) - 3;
#elif defined(LZO1Z)
{
unsigned off = t & 0x1f;
m_pos = op;
if (off >= 0x1c) {
assert(last_m_off > 0);
m_pos -= last_m_off;
} else {
off = 1 + (off << 6) + (*ip++ >> 2);
m_pos -= off;
last_m_off = off;
}
}
t = (t >> 5) - 1;
#endif
TEST_LB(m_pos); assert(t > 0); NEED_OP(t+3-1);
goto copy_match;
#endif /* COPY_DICT */
}
else if (t >= 32) { /* a M3 match */
t &= 31;
if (t == 0) {
NEED_IP(1);
while (*ip == 0) {
t += 255;
ip++;
NEED_IP(1);
}
t += 31 + *ip++;
}
#if defined(COPY_DICT)
#if defined(LZO1Z)
m_off = 1 + (ip[0] << 6) + (ip[1] >> 2);
last_m_off = m_off;
#else
m_off = 1 + (ip[0] >> 2) + (ip[1] << 6);
#endif
#else /* !COPY_DICT */
#if defined(LZO1Z)
{
unsigned off = 1 + (ip[0] << 6) + (ip[1] >> 2);
m_pos = op - off;
last_m_off = off;
}
#elif defined(LZO_UNALIGNED_OK_2) && defined(LZO_ABI_LITTLE_ENDIAN)
m_pos = op - 1;
m_pos -= (* (const lzo_ushortp) ip) >> 2;
#else
m_pos = op - 1;
m_pos -= (ip[0] >> 2) + (ip[1] << 6);
#endif
#endif /* COPY_DICT */
ip += 2;
}
else if (t >= 16) { /* a M4 match */
#if defined(COPY_DICT)
m_off = (t & 8) << 11;
#else /* !COPY_DICT */
m_pos = op;
m_pos -= (t & 8) << 11;
#endif /* COPY_DICT */
t &= 7;
if (t == 0) {
NEED_IP(1);
while (*ip == 0) {
t += 255;
ip++;
NEED_IP(1);
}
t += 7 + *ip++;
}
#if defined(COPY_DICT)
#if defined(LZO1Z)
m_off += (ip[0] << 6) + (ip[1] >> 2);
#else
m_off += (ip[0] >> 2) + (ip[1] << 6);
#endif
ip += 2;
if (m_off == 0)
goto eof_found;
m_off += 0x4000;
#if defined(LZO1Z)
last_m_off = m_off;
#endif
#else /* !COPY_DICT */
#if defined(LZO1Z)
m_pos -= (ip[0] << 6) + (ip[1] >> 2);
#elif defined(LZO_UNALIGNED_OK_2) && defined(LZO_ABI_LITTLE_ENDIAN)
m_pos -= (* (const lzo_ushortp) ip) >> 2;
#else
m_pos -= (ip[0] >> 2) + (ip[1] << 6);
#endif
ip += 2;
if (m_pos == op)
goto eof_found;
m_pos -= 0x4000;
#if defined(LZO1Z)
last_m_off = pd((const uint8_t*)op, m_pos);
#endif
#endif /* COPY_DICT */
}
else { /* a M1 match */
#if defined(COPY_DICT)
#if defined(LZO1Z)
m_off = 1 + (t << 6) + (*ip++ >> 2);
last_m_off = m_off;
#else
m_off = 1 + (t >> 2) + (*ip++ << 2);
#endif
NEED_OP(2);
t = 2; COPY_DICT(t,m_off)
#else /* !COPY_DICT */
#if defined(LZO1Z)
t = 1 + (t << 6) + (*ip++ >> 2);
m_pos = op - t;
last_m_off = t;
#else
m_pos = op - 1;
m_pos -= t >> 2;
m_pos -= *ip++ << 2;
#endif
TEST_LB(m_pos); NEED_OP(2);
*op++ = *m_pos++;
*op++ = *m_pos;
#endif /* COPY_DICT */
goto match_done;
}
/* copy match */
#if defined(COPY_DICT)
NEED_OP(t+3-1);
t += 3-1; COPY_DICT(t,m_off)
#else /* !COPY_DICT */
TEST_LB(m_pos); assert(t > 0); NEED_OP(t+3-1);
#if defined(LZO_UNALIGNED_OK_4) || defined(LZO_ALIGNED_OK_4)
# if !defined(LZO_UNALIGNED_OK_4)
if (t >= 2 * 4 - (3 - 1) && PTR_ALIGNED2_4(op,m_pos)) {
assert((op - m_pos) >= 4); /* both pointers are aligned */
# else
if (t >= 2 * 4 - (3 - 1) && (op - m_pos) >= 4) {
# endif
COPY4(op,m_pos);
op += 4; m_pos += 4; t -= 4 - (3 - 1);
do {
COPY4(op,m_pos);
op += 4; m_pos += 4; t -= 4;
} while (t >= 4);
if (t > 0)
do *op++ = *m_pos++; while (--t > 0);
}
else
#endif
{
copy_match:
*op++ = *m_pos++; *op++ = *m_pos++;
do *op++ = *m_pos++; while (--t > 0);
}
#endif /* COPY_DICT */
match_done:
#if defined(LZO1Z)
t = ip[-1] & 3;
#else
t = ip[-2] & 3;
#endif
if (t == 0)
break;
/* copy literals */
match_next:
assert(t > 0);
assert(t < 4);
NEED_OP(t);
NEED_IP(t+1);
#if 0
do *op++ = *ip++; while (--t > 0);
#else
*op++ = *ip++;
if (t > 1) {
*op++ = *ip++;
if (t > 2)
*op++ = *ip++;
}
#endif
t = *ip++;
} while (TEST_IP && TEST_OP);
}
//#if defined(HAVE_TEST_IP) || defined(HAVE_TEST_OP)
/* no EOF code was found */
*out_len = pd(op, out);
return LZO_E_EOF_NOT_FOUND;
//#endif
eof_found:
assert(t == 1);
*out_len = pd(op, out);
return (ip == ip_end ? LZO_E_OK :
(ip < ip_end ? LZO_E_INPUT_NOT_CONSUMED : LZO_E_INPUT_OVERRUN));
//#if defined(HAVE_NEED_IP)
input_overrun:
*out_len = pd(op, out);
return LZO_E_INPUT_OVERRUN;
//#endif
//#if defined(HAVE_NEED_OP)
output_overrun:
*out_len = pd(op, out);
return LZO_E_OUTPUT_OVERRUN;
//#endif
//#if defined(LZO_TEST_OVERRUN_LOOKBEHIND)
lookbehind_overrun:
*out_len = pd(op, out);
return LZO_E_LOOKBEHIND_OVERRUN;
//#endif
}
-1078
View File
File diff suppressed because it is too large. Load diff
-382
View File
@@ -1,382 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Mini rpm applet for busybox
*
* Copyright (C) 2001,2002 by Laurence Anderson
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
#include "rpm.h"
#define RPM_CHAR_TYPE 1
#define RPM_INT8_TYPE 2
#define RPM_INT16_TYPE 3
#define RPM_INT32_TYPE 4
/* #define RPM_INT64_TYPE 5 ---- These aren't supported (yet) */
#define RPM_STRING_TYPE 6
#define RPM_BIN_TYPE 7
#define RPM_STRING_ARRAY_TYPE 8
#define RPM_I18NSTRING_TYPE 9
#define TAG_NAME 1000
#define TAG_VERSION 1001
#define TAG_RELEASE 1002
#define TAG_SUMMARY 1004
#define TAG_DESCRIPTION 1005
#define TAG_BUILDTIME 1006
#define TAG_BUILDHOST 1007
#define TAG_SIZE 1009
#define TAG_VENDOR 1011
#define TAG_LICENSE 1014
#define TAG_PACKAGER 1015
#define TAG_GROUP 1016
#define TAG_URL 1020
#define TAG_PREIN 1023
#define TAG_POSTIN 1024
#define TAG_FILEFLAGS 1037
#define TAG_FILEUSERNAME 1039
#define TAG_FILEGROUPNAME 1040
#define TAG_SOURCERPM 1044
#define TAG_PREINPROG 1085
#define TAG_POSTINPROG 1086
#define TAG_PREFIXS 1098
#define TAG_DIRINDEXES 1116
#define TAG_BASENAMES 1117
#define TAG_DIRNAMES 1118
#define RPMFILE_CONFIG (1 << 0)
#define RPMFILE_DOC (1 << 1)
enum rpm_functions_e {
rpm_query = 1,
rpm_install = 2,
rpm_query_info = 4,
rpm_query_package = 8,
rpm_query_list = 16,
rpm_query_list_doc = 32,
rpm_query_list_config = 64
};
typedef struct {
uint32_t tag; /* 4 byte tag */
uint32_t type; /* 4 byte type */
uint32_t offset; /* 4 byte offset */
uint32_t count; /* 4 byte count */
} rpm_index;
static void *map;
static rpm_index **mytags;
static int tagcount;
static void extract_cpio(int fd, const char *source_rpm);
static rpm_index **rpm_gettags(int fd, int *num_tags);
static int bsearch_rpmtag(const void *key, const void *item);
static char *rpm_getstr(int tag, int itemindex);
static int rpm_getint(int tag, int itemindex);
static int rpm_getcount(int tag);
static void fileaction_dobackup(char *filename, int fileref);
static void fileaction_setowngrp(char *filename, int fileref);
static void loop_through_files(int filetag, void (*fileaction)(char *filename, int fileref));
int rpm_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int rpm_main(int argc, char **argv)
{
int opt = 0, func = 0, rpm_fd, offset;
const int pagesize = getpagesize();
while ((opt = getopt(argc, argv, "iqpldc")) != -1) {
switch (opt) {
case 'i': /* First arg: Install mode, with q: Information */
if (!func) func = rpm_install;
else func |= rpm_query_info;
break;
case 'q': /* First arg: Query mode */
if (func) bb_show_usage();
func = rpm_query;
break;
case 'p': /* Query a package */
func |= rpm_query_package;
break;
case 'l': /* List files in a package */
func |= rpm_query_list;
break;
case 'd': /* List doc files in a package (implies list) */
func |= rpm_query_list;
func |= rpm_query_list_doc;
break;
case 'c': /* List config files in a package (implies list) */
func |= rpm_query_list;
func |= rpm_query_list_config;
break;
default:
bb_show_usage();
}
}
argv += optind;
//argc -= optind;
if (!argv[0]) {
bb_show_usage();
}
while (*argv) {
const char *source_rpm;
rpm_fd = xopen(*argv++, O_RDONLY);
mytags = rpm_gettags(rpm_fd, &tagcount);
if (!mytags)
bb_error_msg_and_die("error reading rpm header");
offset = xlseek(rpm_fd, 0, SEEK_CUR);
/* Mimimum is one page */
map = mmap(0, offset > pagesize ? (offset + offset % pagesize) : pagesize, PROT_READ, MAP_PRIVATE, rpm_fd, 0);
source_rpm = rpm_getstr(TAG_SOURCERPM, 0);
if (func & rpm_install) {
/* Backup any config files */
loop_through_files(TAG_BASENAMES, fileaction_dobackup);
/* Extact the archive */
extract_cpio(rpm_fd, source_rpm);
/* Set the correct file uid/gid's */
loop_through_files(TAG_BASENAMES, fileaction_setowngrp);
}
else if ((func & (rpm_query|rpm_query_package)) == (rpm_query|rpm_query_package)) {
if (!(func & (rpm_query_info|rpm_query_list))) {
/* If just a straight query, just give package name */
printf("%s-%s-%s\n", rpm_getstr(TAG_NAME, 0), rpm_getstr(TAG_VERSION, 0), rpm_getstr(TAG_RELEASE, 0));
}
if (func & rpm_query_info) {
/* Do the nice printout */
time_t bdate_time;
struct tm *bdate_ptm;
char bdatestring[50];
const char *p;
p = rpm_getstr(TAG_PREFIXS, 0);
if (!p) p = "(not relocateable)";
printf("Name : %-29sRelocations: %s\n", rpm_getstr(TAG_NAME, 0), p);
p = rpm_getstr(TAG_VENDOR, 0);
if (!p) p = "(none)";
printf("Version : %-34sVendor: %s\n", rpm_getstr(TAG_VERSION, 0), p);
bdate_time = rpm_getint(TAG_BUILDTIME, 0);
bdate_ptm = localtime(&bdate_time);
strftime(bdatestring, 50, "%a %d %b %Y %T %Z", bdate_ptm);
printf("Release : %-30sBuild Date: %s\n", rpm_getstr(TAG_RELEASE, 0), bdatestring);
printf("Install date: %-30sBuild Host: %s\n", "(not installed)", rpm_getstr(TAG_BUILDHOST, 0));
printf("Group : %-30sSource RPM: %s\n", rpm_getstr(TAG_GROUP, 0), source_rpm);
printf("Size : %-33dLicense: %s\n", rpm_getint(TAG_SIZE, 0), rpm_getstr(TAG_LICENSE, 0));
printf("URL : %s\n", rpm_getstr(TAG_URL, 0));
printf("Summary : %s\n", rpm_getstr(TAG_SUMMARY, 0));
printf("Description :\n%s\n", rpm_getstr(TAG_DESCRIPTION, 0));
}
if (func & rpm_query_list) {
int count, it, flags;
count = rpm_getcount(TAG_BASENAMES);
for (it = 0; it < count; it++) {
flags = rpm_getint(TAG_FILEFLAGS, it);
switch (func & (rpm_query_list_doc|rpm_query_list_config)) {
case rpm_query_list_doc:
if (!(flags & RPMFILE_DOC)) continue;
break;
case rpm_query_list_config:
if (!(flags & RPMFILE_CONFIG)) continue;
break;
case rpm_query_list_doc|rpm_query_list_config:
if (!(flags & (RPMFILE_CONFIG|RPMFILE_DOC))) continue;
break;
}
printf("%s%s\n",
rpm_getstr(TAG_DIRNAMES, rpm_getint(TAG_DIRINDEXES, it)),
rpm_getstr(TAG_BASENAMES, it));
}
}
}
free(mytags);
}
return 0;
}
static void extract_cpio(int fd, const char *source_rpm)
{
archive_handle_t *archive_handle;
if (source_rpm != NULL) {
/* Binary rpm (it was built from some SRPM), install to root */
xchdir("/");
} /* else: SRPM, install to current dir */
/* Initialize */
archive_handle = init_handle();
archive_handle->seek = seek_by_read;
archive_handle->action_data = data_extract_all;
#if 0 /* For testing (rpm -i only lists the files in internal cpio): */
archive_handle->action_header = header_list;
archive_handle->action_data = data_skip;
#endif
archive_handle->ah_flags = ARCHIVE_RESTORE_DATE | ARCHIVE_CREATE_LEADING_DIRS
/* compat: overwrite existing files.
* try "rpm -i foo.src.rpm" few times in a row -
* standard rpm will not complain.
* (TODO? real rpm creates "file;1234" and then renames it) */
| ARCHIVE_UNLINK_OLD;
archive_handle->src_fd = fd;
/*archive_handle->offset = 0; - init_handle() did it */
setup_unzip_on_fd(archive_handle->src_fd /*, fail_if_not_detected: 1*/);
while (get_header_cpio(archive_handle) == EXIT_SUCCESS)
continue;
}
static rpm_index **rpm_gettags(int fd, int *num_tags)
{
/* We should never need more than 200 (shrink via realloc later) */
rpm_index **tags = xzalloc(200 * sizeof(tags[0]));
int pass, tagindex = 0;
xlseek(fd, 96, SEEK_CUR); /* Seek past the unused lead */
/* 1st pass is the signature headers, 2nd is the main stuff */
for (pass = 0; pass < 2; pass++) {
struct rpm_header header;
rpm_index *tmpindex;
int storepos;
xread(fd, &header, sizeof(header));
if (header.magic_and_ver != htonl(RPM_HEADER_MAGICnVER))
return NULL; /* Invalid magic, or not version 1 */
header.size = ntohl(header.size);
header.entries = ntohl(header.entries);
storepos = xlseek(fd, 0, SEEK_CUR) + header.entries * 16;
while (header.entries--) {
tmpindex = tags[tagindex++] = xmalloc(sizeof(*tmpindex));
xread(fd, tmpindex, sizeof(*tmpindex));
tmpindex->tag = ntohl(tmpindex->tag);
tmpindex->type = ntohl(tmpindex->type);
tmpindex->count = ntohl(tmpindex->count);
tmpindex->offset = storepos + ntohl(tmpindex->offset);
if (pass == 0)
tmpindex->tag -= 743;
}
storepos = xlseek(fd, header.size, SEEK_CUR); /* Seek past store */
/* Skip padding to 8 byte boundary after reading signature headers */
if (pass == 0)
xlseek(fd, (-storepos) & 0x7, SEEK_CUR);
}
/* realloc tags to save space */
tags = xrealloc(tags, tagindex * sizeof(tags[0]));
*num_tags = tagindex;
/* All done, leave the file at the start of the gzipped cpio archive */
return tags;
}
static int bsearch_rpmtag(const void *key, const void *item)
{
int *tag = (int *)key;
rpm_index **tmp = (rpm_index **) item;
return (*tag - tmp[0]->tag);
}
static int rpm_getcount(int tag)
{
rpm_index **found;
found = bsearch(&tag, mytags, tagcount, sizeof(struct rpmtag *), bsearch_rpmtag);
if (!found)
return 0;
return found[0]->count;
}
static char *rpm_getstr(int tag, int itemindex)
{
rpm_index **found;
found = bsearch(&tag, mytags, tagcount, sizeof(struct rpmtag *), bsearch_rpmtag);
if (!found || itemindex >= found[0]->count)
return NULL;
if (found[0]->type == RPM_STRING_TYPE
|| found[0]->type == RPM_I18NSTRING_TYPE
|| found[0]->type == RPM_STRING_ARRAY_TYPE
) {
int n;
char *tmpstr = (char *) map + found[0]->offset;
for (n = 0; n < itemindex; n++)
tmpstr = tmpstr + strlen(tmpstr) + 1;
return tmpstr;
}
return NULL;
}
static int rpm_getint(int tag, int itemindex)
{
rpm_index **found;
int *tmpint; /* NB: using int8_t* would be easier to code */
/* gcc throws warnings here when sizeof(void*)!=sizeof(int) ...
* it's ok to ignore it because tag won't be used as a pointer */
found = bsearch(&tag, mytags, tagcount, sizeof(struct rpmtag *), bsearch_rpmtag);
if (!found || itemindex >= found[0]->count)
return -1;
tmpint = (int *) ((char *) map + found[0]->offset);
if (found[0]->type == RPM_INT32_TYPE) {
tmpint = (int *) ((char *) tmpint + itemindex*4);
/*return ntohl(*tmpint);*/
/* int can be != int32_t */
return ntohl(*(int32_t*)tmpint);
}
if (found[0]->type == RPM_INT16_TYPE) {
tmpint = (int *) ((char *) tmpint + itemindex*2);
/* ??? read int, and THEN ntohs() it?? */
/*return ntohs(*tmpint);*/
return ntohs(*(int16_t*)tmpint);
}
if (found[0]->type == RPM_INT8_TYPE) {
tmpint = (int *) ((char *) tmpint + itemindex);
/* ??? why we don't read byte here??? */
/*return ntohs(*tmpint);*/
return *(int8_t*)tmpint;
}
return -1;
}
static void fileaction_dobackup(char *filename, int fileref)
{
struct stat oldfile;
int stat_res;
char *newname;
if (rpm_getint(TAG_FILEFLAGS, fileref) & RPMFILE_CONFIG) {
/* Only need to backup config files */
stat_res = lstat(filename, &oldfile);
if (stat_res == 0 && S_ISREG(oldfile.st_mode)) {
/* File already exists - really should check MD5's etc to see if different */
newname = xasprintf("%s.rpmorig", filename);
copy_file(filename, newname, FILEUTILS_RECUR | FILEUTILS_PRESERVE_STATUS);
remove_file(filename, FILEUTILS_RECUR | FILEUTILS_FORCE);
free(newname);
}
}
}
static void fileaction_setowngrp(char *filename, int fileref)
{
/* real rpm warns: "user foo does not exist - using <you>" */
struct passwd *pw = getpwnam(rpm_getstr(TAG_FILEUSERNAME, fileref));
int uid = pw ? pw->pw_uid : getuid(); /* or euid? */
struct group *gr = getgrnam(rpm_getstr(TAG_FILEGROUPNAME, fileref));
int gid = gr ? gr->gr_gid : getgid();
chown(filename, uid, gid);
}
static void loop_through_files(int filetag, void (*fileaction)(char *filename, int fileref))
{
int count = 0;
while (rpm_getstr(filetag, count)) {
char* filename = xasprintf("%s%s",
rpm_getstr(TAG_DIRNAMES, rpm_getint(TAG_DIRINDEXES, count)),
rpm_getstr(TAG_BASENAMES, count));
fileaction(filename, count++);
free(filename);
}
}
-38
View File
@@ -1,38 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* RPM structs and consts
*
* Copyright (C) 2001 by Laurence Anderson
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
/* RPM file starts with this struct: */
struct rpm_lead {
uint32_t magic;
uint8_t major, minor;
uint16_t type;
uint16_t archnum;
char name[66];
uint16_t osnum;
uint16_t signature_type;
char reserved[16];
};
struct BUG_rpm_lead {
char bug[sizeof(struct rpm_lead) == 96 ? 1 : -1];
};
#define RPM_LEAD_MAGIC 0xedabeedb
#define RPM_LEAD_MAGIC_STR "\355\253\356\333"
/* Then follows the header: */
struct rpm_header {
uint32_t magic_and_ver; /* 3 byte magic: 0x8e 0xad 0xe8; 1 byte version: 0x01 */
uint32_t reserved; /* 4 bytes reserved */
uint32_t entries; /* Number of entries in header (4 bytes) */
uint32_t size; /* Size of store (4 bytes) */
};
struct BUG_rpm_header {
char bug[sizeof(struct rpm_header) == 16 ? 1 : -1];
};
#define RPM_HEADER_MAGICnVER 0x8eade801
#define RPM_HEADER_MAGIC_STR "\216\255\350"
-113
View File
@@ -1,113 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Mini rpm2cpio implementation for busybox
*
* Copyright (C) 2001 by Laurence Anderson
*
* Licensed under GPLv2 or later, see file LICENSE in this tarball for details.
*/
#include "libbb.h"
#include "unarchive.h"
#include "rpm.h"
enum { rpm_fd = STDIN_FILENO };
static unsigned skip_header(void)
{
struct rpm_header header;
unsigned len;
xread(rpm_fd, &header, sizeof(header));
// if (strncmp((char *) &header.magic, RPM_HEADER_MAGIC_STR, 3) != 0) {
// bb_error_msg_and_die("invalid RPM header magic");
// }
// if (header.version != 1) {
// bb_error_msg_and_die("unsupported RPM header version");
// }
if (header.magic_and_ver != htonl(RPM_HEADER_MAGICnVER)) {
bb_error_msg_and_die("invalid RPM header magic or unsupported version");
// ": %x != %x", header.magic_and_ver, htonl(RPM_HEADER_MAGICnVER));
}
/* Seek past index entries, and past store */
len = 16 * ntohl(header.entries) + ntohl(header.size);
seek_by_jump(rpm_fd, len);
return sizeof(header) + len;
}
/* No getopt required */
int rpm2cpio_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int rpm2cpio_main(int argc UNUSED_PARAM, char **argv)
{
struct rpm_lead lead;
unsigned pos;
if (argv[1]) {
xmove_fd(xopen(argv[1], O_RDONLY), rpm_fd);
}
xread(rpm_fd, &lead, sizeof(lead));
/* Just check the magic, the rest is irrelevant */
if (lead.magic != htonl(RPM_LEAD_MAGIC)) {
bb_error_msg_and_die("invalid RPM magic");
}
/* Skip the signature header, align to 8 bytes */
pos = skip_header();
seek_by_jump(rpm_fd, (-(int)pos) & 7);
/* Skip the main header */
skip_header();
#if 0
/* This works, but doesn't report uncompress errors (they happen in child) */
setup_unzip_on_fd(rpm_fd /*fail_if_not_detected: 1*/);
if (bb_copyfd_eof(rpm_fd, STDOUT_FILENO) < 0)
bb_error_msg_and_die("error unpacking");
#else
/* BLOAT */
{
union {
uint8_t b[4];
uint16_t b16[2];
uint32_t b32[1];
} magic;
IF_DESKTOP(long long) int FAST_FUNC (*unpack)(int src_fd, int dst_fd);
xread(rpm_fd, magic.b16, sizeof(magic.b16[0]));
if (magic.b16[0] == GZIP_MAGIC) {
unpack = unpack_gz_stream;
} else
if (ENABLE_FEATURE_SEAMLESS_BZ2
&& magic.b16[0] == BZIP2_MAGIC
) {
unpack = unpack_bz2_stream;
} else
if (ENABLE_FEATURE_SEAMLESS_XZ
&& magic.b16[0] == XZ_MAGIC1
) {
xread(rpm_fd, magic.b32, sizeof(magic.b32[0]));
if (magic.b32[0] != XZ_MAGIC2)
goto no_magic;
/* unpack_xz_stream wants fd at position 6, no need to seek */
//xlseek(rpm_fd, -6, SEEK_CUR);
unpack = unpack_xz_stream;
} else {
no_magic:
bb_error_msg_and_die("no gzip"
IF_FEATURE_SEAMLESS_BZ2("/bzip2")
IF_FEATURE_SEAMLESS_XZ("/xz")
" magic");
}
if (unpack(rpm_fd, STDOUT_FILENO) < 0)
bb_error_msg_and_die("error unpacking");
}
#endif
if (ENABLE_FEATURE_CLEAN_UP) {
close(rpm_fd);
}
return 0;
}
-1092
View File
File diff suppressed because it is too large. Load diff
-692
View File
@@ -1,692 +0,0 @@
/* vi: set sw=4 ts=4: */
/*
* Mini unzip implementation for busybox
*
* Copyright (C) 2004 by Ed Clark
*
* Loosely based on original busybox unzip applet by Laurence Anderson.
* All options and features should work in this version.
*
* Licensed under the GPL v2 or later, see the file LICENSE in this tarball.
*/
/* For reference see
* http://www.pkware.com/company/standards/appnote/
* http://www.info-zip.org/pub/infozip/doc/appnote-iz-latest.zip
*/
/* TODO
* Zip64 + other methods
*/
#include "libbb.h"
#include "unarchive.h"
enum {
#if BB_BIG_ENDIAN
ZIP_FILEHEADER_MAGIC = 0x504b0304,
ZIP_CDF_MAGIC = 0x504b0102, /* central directory's file header */
ZIP_CDE_MAGIC = 0x504b0506, /* "end of central directory" record */
ZIP_DD_MAGIC = 0x504b0708,
#else
ZIP_FILEHEADER_MAGIC = 0x04034b50,
ZIP_CDF_MAGIC = 0x02014b50,
ZIP_CDE_MAGIC = 0x06054b50,
ZIP_DD_MAGIC = 0x08074b50,
#endif
};
#define ZIP_HEADER_LEN 26
typedef union {
uint8_t raw[ZIP_HEADER_LEN];
struct {
uint16_t version; /* 0-1 */
uint16_t zip_flags; /* 2-3 */
uint16_t method; /* 4-5 */
uint16_t modtime; /* 6-7 */
uint16_t moddate; /* 8-9 */
uint32_t crc32 PACKED; /* 10-13 */
uint32_t cmpsize PACKED; /* 14-17 */
uint32_t ucmpsize PACKED; /* 18-21 */
uint16_t filename_len; /* 22-23 */
uint16_t extra_len; /* 24-25 */
} formatted PACKED;
} zip_header_t; /* PACKED - gcc 4.2.1 doesn't like it (spews warning) */
/* Check the offset of the last element, not the length. This leniency
* allows for poor packing, whereby the overall struct may be too long,
* even though the elements are all in the right place.
*/
struct BUG_zip_header_must_be_26_bytes {
char BUG_zip_header_must_be_26_bytes[
offsetof(zip_header_t, formatted.extra_len) + 2
== ZIP_HEADER_LEN ? 1 : -1];
};
#define FIX_ENDIANNESS_ZIP(zip_header) do { \
(zip_header).formatted.version = SWAP_LE16((zip_header).formatted.version ); \
(zip_header).formatted.method = SWAP_LE16((zip_header).formatted.method ); \
(zip_header).formatted.modtime = SWAP_LE16((zip_header).formatted.modtime ); \
(zip_header).formatted.moddate = SWAP_LE16((zip_header).formatted.moddate ); \
(zip_header).formatted.crc32 = SWAP_LE32((zip_header).formatted.crc32 ); \
(zip_header).formatted.cmpsize = SWAP_LE32((zip_header).formatted.cmpsize ); \
(zip_header).formatted.ucmpsize = SWAP_LE32((zip_header).formatted.ucmpsize ); \
(zip_header).formatted.filename_len = SWAP_LE16((zip_header).formatted.filename_len); \
(zip_header).formatted.extra_len = SWAP_LE16((zip_header).formatted.extra_len ); \
} while (0)
#define CDF_HEADER_LEN 42
typedef union {
uint8_t raw[CDF_HEADER_LEN];
struct {
/* uint32_t signature; 50 4b 01 02 */
uint16_t version_made_by; /* 0-1 */
uint16_t version_needed; /* 2-3 */
uint16_t cdf_flags; /* 4-5 */
uint16_t method; /* 6-7 */
uint16_t mtime; /* 8-9 */
uint16_t mdate; /* 10-11 */
uint32_t crc32; /* 12-15 */
uint32_t cmpsize; /* 16-19 */
uint32_t ucmpsize; /* 20-23 */
uint16_t file_name_length; /* 24-25 */
uint16_t extra_field_length; /* 26-27 */
uint16_t file_comment_length; /* 28-29 */
uint16_t disk_number_start; /* 30-31 */
uint16_t internal_file_attributes; /* 32-33 */
uint32_t external_file_attributes PACKED; /* 34-37 */
uint32_t relative_offset_of_local_header PACKED; /* 38-41 */
} formatted PACKED;
} cdf_header_t;
struct BUG_cdf_header_must_be_42_bytes {
char BUG_cdf_header_must_be_42_bytes[
offsetof(cdf_header_t, formatted.relative_offset_of_local_header) + 4
== CDF_HEADER_LEN ? 1 : -1];
};
#define FIX_ENDIANNESS_CDF(cdf_header) do { \
(cdf_header).formatted.crc32 = SWAP_LE32((cdf_header).formatted.crc32 ); \
(cdf_header).formatted.cmpsize = SWAP_LE32((cdf_header).formatted.cmpsize ); \
(cdf_header).formatted.ucmpsize = SWAP_LE32((cdf_header).formatted.ucmpsize ); \
(cdf_header).formatted.file_name_length = SWAP_LE16((cdf_header).formatted.file_name_length); \
(cdf_header).formatted.extra_field_length = SWAP_LE16((cdf_header).formatted.extra_field_length); \
(cdf_header).formatted.file_comment_length = SWAP_LE16((cdf_header).formatted.file_comment_length); \
IF_DESKTOP( \
(cdf_header).formatted.version_made_by = SWAP_LE16((cdf_header).formatted.version_made_by); \
(cdf_header).formatted.external_file_attributes = SWAP_LE32((cdf_header).formatted.external_file_attributes); \
) \
} while (0)
#define CDE_HEADER_LEN 16
typedef union {
uint8_t raw[CDE_HEADER_LEN];
struct {
/* uint32_t signature; 50 4b 05 06 */
uint16_t this_disk_no;
uint16_t disk_with_cdf_no;
uint16_t cdf_entries_on_this_disk;
uint16_t cdf_entries_total;
uint32_t cdf_size;
uint32_t cdf_offset;
/* uint16_t file_comment_length; */
/* .ZIP file comment (variable size) */
} formatted PACKED;
} cde_header_t;
struct BUG_cde_header_must_be_16_bytes {
char BUG_cde_header_must_be_16_bytes[
sizeof(cde_header_t) == CDE_HEADER_LEN ? 1 : -1];
};
#define FIX_ENDIANNESS_CDE(cde_header) do { \
(cde_header).formatted.cdf_offset = SWAP_LE32((cde_header).formatted.cdf_offset); \
} while (0)
enum { zip_fd = 3 };
#if ENABLE_DESKTOP
#define PEEK_FROM_END 16384
/* NB: does not preserve file position! */
static uint32_t find_cdf_offset(void)
{
cde_header_t cde_header;
unsigned char *p;
off_t end;
unsigned char *buf = xzalloc(PEEK_FROM_END);
end = xlseek(zip_fd, 0, SEEK_END);
end -= PEEK_FROM_END;
if (end < 0)
end = 0;
xlseek(zip_fd, end, SEEK_SET);
full_read(zip_fd, buf, PEEK_FROM_END);
p = buf;
while (p <= buf + PEEK_FROM_END - CDE_HEADER_LEN - 4) {
if (*p != 'P') {
p++;
continue;
}
if (*++p != 'K')
continue;
if (*++p != 5)
continue;
if (*++p != 6)
continue;
/* we found CDE! */
memcpy(cde_header.raw, p + 1, CDE_HEADER_LEN);
FIX_ENDIANNESS_CDE(cde_header);
free(buf);
return cde_header.formatted.cdf_offset;
}
//free(buf);
bb_error_msg_and_die("can't find file table");
};
static uint32_t read_next_cdf(uint32_t cdf_offset, cdf_header_t *cdf_ptr)
{
off_t org;
org = xlseek(zip_fd, 0, SEEK_CUR);
if (!cdf_offset)
cdf_offset = find_cdf_offset();
xlseek(zip_fd, cdf_offset + 4, SEEK_SET);
xread(zip_fd, cdf_ptr->raw, CDF_HEADER_LEN);
FIX_ENDIANNESS_CDF(*cdf_ptr);
cdf_offset += 4 + CDF_HEADER_LEN
+ cdf_ptr->formatted.file_name_length
+ cdf_ptr->formatted.extra_field_length
+ cdf_ptr->formatted.file_comment_length;
xlseek(zip_fd, org, SEEK_SET);
return cdf_offset;
};
#endif
static void unzip_skip(off_t skip)
{
if (lseek(zip_fd, skip, SEEK_CUR) == (off_t)-1)
bb_copyfd_exact_size(zip_fd, -1, skip);
}
static void unzip_create_leading_dirs(const char *fn)
{
/* Create all leading directories */
char *name = xstrdup(fn);
if (bb_make_directory(dirname(name), 0777, FILEUTILS_RECUR)) {
bb_error_msg_and_die("exiting"); /* bb_make_directory is noisy */
}
free(name);
}
static void unzip_extract(zip_header_t *zip_header, int dst_fd)
{
if (zip_header->formatted.method == 0) {
/* Method 0 - stored (not compressed) */
off_t size = zip_header->formatted.ucmpsize;
if (size)
bb_copyfd_exact_size(zip_fd, dst_fd, size);
} else {
/* Method 8 - inflate */
inflate_unzip_result res;
if (inflate_unzip(&res, zip_header->formatted.cmpsize, zip_fd, dst_fd) < 0)
bb_error_msg_and_die("inflate error");
/* Validate decompression - crc */
if (zip_header->formatted.crc32 != (res.crc ^ 0xffffffffL)) {
bb_error_msg_and_die("crc error");
}
/* Validate decompression - size */
if (zip_header->formatted.ucmpsize != res.bytes_out) {
/* Don't die. Who knows, maybe len calculation
* was botched somewhere. After all, crc matched! */
bb_error_msg("bad length");
}
}
}
int unzip_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
int unzip_main(int argc, char **argv)
{
enum { O_PROMPT, O_NEVER, O_ALWAYS };
zip_header_t zip_header;
smallint quiet = 0;
IF_NOT_DESKTOP(const) smallint verbose = 0;
smallint listing = 0;
smallint overwrite = O_PROMPT;
#if ENABLE_DESKTOP
uint32_t cdf_offset;
#endif
unsigned long total_usize;
unsigned long total_size;
unsigned total_entries;
int dst_fd = -1;
char *src_fn = NULL;
char *dst_fn = NULL;
llist_t *zaccept = NULL;
llist_t *zreject = NULL;
char *base_dir = NULL;
int i, opt;
int opt_range = 0;
char key_buf[80];
struct stat stat_buf;
/* -q, -l and -v: UnZip 5.52 of 28 February 2005, by Info-ZIP:
*
* # /usr/bin/unzip -qq -v decompress_unlzma.i.zip
* 204372 Defl:N 35278 83% 09-06-09 14:23 0d056252 decompress_unlzma.i
* # /usr/bin/unzip -q -v decompress_unlzma.i.zip
* Length Method Size Ratio Date Time CRC-32 Name
* -------- ------ ------- ----- ---- ---- ------ ----
* 204372 Defl:N 35278 83% 09-06-09 14:23 0d056252 decompress_unlzma.i
* -------- ------- --- -------
* 204372 35278 83% 1 file
* # /usr/bin/unzip -v decompress_unlzma.i.zip
* Archive: decompress_unlzma.i.zip
* Length Method Size Ratio Date Time CRC-32 Name
* -------- ------ ------- ----- ---- ---- ------ ----
* 204372 Defl:N 35278 83% 09-06-09 14:23 0d056252 decompress_unlzma.i
* -------- ------- --- -------
* 204372 35278 83% 1 file
* # unzip -v decompress_unlzma.i.zip
* Archive: decompress_unlzma.i.zip
* Length Date Time Name
* -------- ---- ---- ----
* 204372 09-06-09 14:23 decompress_unlzma.i
* -------- -------
* 204372 1 files
* # /usr/bin/unzip -l -qq decompress_unlzma.i.zip
* 204372 09-06-09 14:23 decompress_unlzma.i
* # /usr/bin/unzip -l -q decompress_unlzma.i.zip
* Length Date Time Name
* -------- ---- ---- ----
* 204372 09-06-09 14:23 decompress_unlzma.i
* -------- -------
* 204372 1 file
* # /usr/bin/unzip -l decompress_unlzma.i.zip
* Archive: decompress_unlzma.i.zip
* Length Date Time Name
* -------- ---- ---- ----
* 204372 09-06-09 14:23 decompress_unlzma.i
* -------- -------
* 204372 1 file
*/
/* '-' makes getopt return 1 for non-options */
while ((opt = getopt(argc, argv, "-d:lnopqxv")) != -1) {
switch (opt_range) {
case 0: /* Options */
switch (opt) {
case 'l': /* List */
listing = 1;
break;
case 'n': /* Never overwrite existing files */
overwrite = O_NEVER;
break;
case 'o': /* Always overwrite existing files */
overwrite = O_ALWAYS;
break;
case 'p': /* Extract files to stdout and fall through to set verbosity */
dst_fd = STDOUT_FILENO;
case 'q': /* Be quiet */
quiet++;
break;
case 'v': /* Verbose list */
IF_DESKTOP(verbose++;)
listing = 1;
break;
case 1: /* The zip file */
/* +5: space for ".zip" and NUL */
src_fn = xmalloc(strlen(optarg) + 5);
strcpy(src_fn, optarg);
opt_range++;
break;
default:
bb_show_usage();
}
break;
case 1: /* Include files */
if (opt == 1) {
llist_add_to(&zaccept, optarg);
break;
}
if (opt == 'd') {
base_dir = optarg;
opt_range += 2;
break;
}
if (opt == 'x') {
opt_range++;
break;
}
bb_show_usage();
case 2 : /* Exclude files */
if (opt == 1) {
llist_add_to(&zreject, optarg);
break;
}
if (opt == 'd') { /* Extract to base directory */
base_dir = optarg;
opt_range++;
break;
}
/* fall through */
default:
bb_show_usage();
}
}
if (src_fn == NULL) {
bb_show_usage();
}
/* Open input file */
if (LONE_DASH(src_fn)) {
xdup2(STDIN_FILENO, zip_fd);
/* Cannot use prompt mode since zip data is arriving on STDIN */
if (overwrite == O_PROMPT)
overwrite = O_NEVER;
} else {
static const char extn[][5] = {"", ".zip", ".ZIP"};
int orig_src_fn_len = strlen(src_fn);
int src_fd = -1;
for (i = 0; (i < 3) && (src_fd == -1); i++) {
strcpy(src_fn + orig_src_fn_len, extn[i]);
src_fd = open(src_fn, O_RDONLY);
}
if (src_fd == -1) {
src_fn[orig_src_fn_len] = '\0';
bb_error_msg_and_die("can't open %s, %s.zip, %s.ZIP", src_fn, src_fn, src_fn);
}
xmove_fd(src_fd, zip_fd);
}
/* Change dir if necessary */
if (base_dir)
xchdir(base_dir);
if (quiet <= 1) { /* not -qq */
if (quiet == 0)
printf("Archive: %s\n", src_fn);
if (listing) {
puts(verbose ?
" Length Method Size Ratio Date Time CRC-32 Name\n"
"-------- ------ ------- ----- ---- ---- ------ ----"
:
" Length Date Time Name\n"
" -------- ---- ---- ----"
);
}
}
/* Example of an archive with one 0-byte long file named 'z'
* created by Zip 2.31 on Unix:
* 0000 [50 4b]03 04 0a 00 00 00 00 00 42 1a b8 3c 00 00 |PK........B..<..|
* sig........ vneed flags compr mtime mdate crc32>
* 0010 00 00 00 00 00 00 00 00 00 00 01 00 15 00 7a 55 |..............zU|
* >..... csize...... usize...... fnlen exlen fn ex>
* 0020 54 09 00 03 cc d3 f9 4b cc d3 f9 4b 55 78 04 00 |T......K...KUx..|
* >tra_field......................................
* 0030 00 00 00 00[50 4b]01 02 17 03 0a 00 00 00 00 00 |....PK..........|
* ........... sig........ vmade vneed flags compr
* 0040 42 1a b8 3c 00 00 00 00 00 00 00 00 00 00 00 00 |B..<............|
* mtime mdate crc32...... csize...... usize......
* 0050 01 00 0d 00 00 00 00 00 00 00 00 00 a4 81 00 00 |................|
* fnlen exlen clen. dnum. iattr eattr...... relofs> (eattr = rw-r--r--)
* 0060 00 00 7a 55 54 05 00 03 cc d3 f9 4b 55 78 00 00 |..zUT......KUx..|
* >..... fn extra_field...........................
* 0070 [50 4b]05 06 00 00 00 00 01 00 01 00 3c 00 00 00 |PK..........<...|
* 0080 34 00 00 00 00 00 |4.....|
*/
total_usize = 0;
total_size = 0;
total_entries = 0;
#if ENABLE_DESKTOP
cdf_offset = 0;
#endif
while (1) {
uint32_t magic;
mode_t dir_mode = 0777;
#if ENABLE_DESKTOP
mode_t file_mode = 0666;
#endif
/* Check magic number */
xread(zip_fd, &magic, 4);
/* Central directory? It's at the end, so exit */
if (magic == ZIP_CDF_MAGIC)
break;
#if ENABLE_DESKTOP
/* Data descriptor? It was a streaming file, go on */
if (magic == ZIP_DD_MAGIC) {
/* skip over duplicate crc32, cmpsize and ucmpsize */
unzip_skip(3 * 4);
continue;
}
#endif
if (magic != ZIP_FILEHEADER_MAGIC)
bb_error_msg_and_die("invalid zip magic %08X", (int)magic);
/* Read the file header */
xread(zip_fd, zip_header.raw, ZIP_HEADER_LEN);
FIX_ENDIANNESS_ZIP(zip_header);
if ((zip_header.formatted.method != 0) && (zip_header.formatted.method != 8)) {
bb_error_msg_and_die("unsupported method %d", zip_header.formatted.method);
}
#if !ENABLE_DESKTOP
if (zip_header.formatted.zip_flags & SWAP_LE16(0x0009)) {
bb_error_msg_and_die("zip flags 1 and 8 are not supported");
}
#else
if (zip_header.formatted.zip_flags & SWAP_LE16(0x0001)) {
/* 0x0001 - encrypted */
bb_error_msg_and_die("zip flag 1 (encryption) is not supported");
}
{
cdf_header_t cdf_header;
cdf_offset = read_next_cdf(cdf_offset, &cdf_header);
if (zip_header.formatted.zip_flags & SWAP_LE16(0x0008)) {
/* 0x0008 - streaming. [u]cmpsize can be reliably gotten
* only from Central Directory. See unzip_doc.txt */
zip_header.formatted.crc32 = cdf_header.formatted.crc32;
zip_header.formatted.cmpsize = cdf_header.formatted.cmpsize;
zip_header.formatted.ucmpsize = cdf_header.formatted.ucmpsize;
}
if ((cdf_header.formatted.version_made_by >> 8) == 3) {
/* this archive is created on Unix */
dir_mode = file_mode = (cdf_header.formatted.external_file_attributes >> 16);
}
}
#endif
/* Read filename */
free(dst_fn);
dst_fn = xzalloc(zip_header.formatted.filename_len + 1);
xread(zip_fd, dst_fn, zip_header.formatted.filename_len);
/* Skip extra header bytes */
unzip_skip(zip_header.formatted.extra_len);
/* Filter zip entries */
if (find_list_entry(zreject, dst_fn)
|| (zaccept && !find_list_entry(zaccept, dst_fn))
) { /* Skip entry */
i = 'n';
} else { /* Extract entry */
if (listing) { /* List entry */
unsigned dostime = zip_header.formatted.modtime | (zip_header.formatted.moddate << 16);
if (!verbose) {
// " Length Date Time Name\n"
// " -------- ---- ---- ----"
printf( "%9u %02u-%02u-%02u %02u:%02u %s\n",
(unsigned)zip_header.formatted.ucmpsize,
(dostime & 0x01e00000) >> 21,
(dostime & 0x001f0000) >> 16,
(((dostime & 0xfe000000) >> 25) + 1980) % 100,
(dostime & 0x0000f800) >> 11,
(dostime & 0x000007e0) >> 5,
dst_fn);
total_usize += zip_header.formatted.ucmpsize;
} else {
unsigned long percents = zip_header.formatted.ucmpsize - zip_header.formatted.cmpsize;
percents = percents * 100;
if (zip_header.formatted.ucmpsize)
percents /= zip_header.formatted.ucmpsize;
// " Length Method Size Ratio Date Time CRC-32 Name\n"
// "-------- ------ ------- ----- ---- ---- ------ ----"
printf( "%8u Defl:N" "%9u%4u%% %02u-%02u-%02u %02u:%02u %08x %s\n",
(unsigned)zip_header.formatted.ucmpsize,
(unsigned)zip_header.formatted.cmpsize,
(unsigned)percents,
(dostime & 0x01e00000) >> 21,
(dostime & 0x001f0000) >> 16,
(((dostime & 0xfe000000) >> 25) + 1980) % 100,
(dostime & 0x0000f800) >> 11,
(dostime & 0x000007e0) >> 5,
zip_header.formatted.crc32,
dst_fn);
total_usize += zip_header.formatted.ucmpsize;
total_size += zip_header.formatted.cmpsize;
}
i = 'n';
} else if (dst_fd == STDOUT_FILENO) { /* Extracting to STDOUT */
i = -1;
} else if (last_char_is(dst_fn, '/')) { /* Extract directory */
if (stat(dst_fn, &stat_buf) == -1) {
if (errno != ENOENT) {
bb_perror_msg_and_die("can't stat '%s'", dst_fn);
}
if (!quiet) {
printf(" creating: %s\n", dst_fn);
}
unzip_create_leading_dirs(dst_fn);
if (bb_make_directory(dst_fn, dir_mode, 0)) {
bb_error_msg_and_die("exiting");
}
} else {
if (!S_ISDIR(stat_buf.st_mode)) {
bb_error_msg_and_die("'%s' exists but is not directory", dst_fn);
}
}
i = 'n';
} else { /* Extract file */
check_file:
if (stat(dst_fn, &stat_buf) == -1) { /* File does not exist */
if (errno != ENOENT) {
bb_perror_msg_and_die("can't stat '%s'", dst_fn);
}
i = 'y';
} else { /* File already exists */
if (overwrite == O_NEVER) {
i = 'n';
} else if (S_ISREG(stat_buf.st_mode)) { /* File is regular file */
if (overwrite == O_ALWAYS) {
i = 'y';
} else {
printf("replace %s? [y]es, [n]o, [A]ll, [N]one, [r]ename: ", dst_fn);
if (!fgets(key_buf, sizeof(key_buf), stdin)) {
bb_perror_msg_and_die("can't read input");
}
i = key_buf[0];
}
} else { /* File is not regular file */
bb_error_msg_and_die("'%s' exists but is not regular file", dst_fn);
}
}
}
}
switch (i) {
case 'A':
overwrite = O_ALWAYS;
case 'y': /* Open file and fall into unzip */
unzip_create_leading_dirs(dst_fn);
#if ENABLE_DESKTOP
dst_fd = xopen3(dst_fn, O_WRONLY | O_CREAT | O_TRUNC, file_mode);
#else
dst_fd = xopen(dst_fn, O_WRONLY | O_CREAT | O_TRUNC);
#endif
case -1: /* Unzip */
if (!quiet) {
printf(" inflating: %s\n", dst_fn);
}
unzip_extract(&zip_header, dst_fd);
if (dst_fd != STDOUT_FILENO) {
/* closing STDOUT is potentially bad for future business */
close(dst_fd);
}
break;
case 'N':
overwrite = O_NEVER;
case 'n':
/* Skip entry data */
unzip_skip(zip_header.formatted.cmpsize);
break;
case 'r':
/* Prompt for new name */
printf("new name: ");
if (!fgets(key_buf, sizeof(key_buf), stdin)) {
bb_perror_msg_and_die("can't read input");
}
free(dst_fn);
dst_fn = xstrdup(key_buf);
chomp(dst_fn);
goto check_file;
default:
printf("error: invalid response [%c]\n", (char)i);
goto check_file;
}
total_entries++;
}
if (listing && quiet <= 1) {
if (!verbose) {
// " Length Date Time Name\n"
// " -------- ---- ---- ----"
printf( " -------- -------\n"
"%9lu" " %u files\n",
total_usize, total_entries);
} else {
unsigned long percents = total_usize - total_size;
percents = percents * 100;
if (total_usize)
percents /= total_usize;
// " Length Method Size Ratio Date Time CRC-32 Name\n"
// "-------- ------ ------- ----- ---- ---- ------ ----"
printf( "-------- ------- --- -------\n"
"%8lu" "%17lu%4u%% %u files\n",
total_usize, total_size, (unsigned)percents,
total_entries);
}
}
return 0;
}
View File
File renamed without changes.
+9 -44
View File
@@ -8,9 +8,6 @@ incorrect, _please_ let me know.
-----------
Peter Willis <psyphreak@phreaker.net>
eject
Emanuele Aina <emanuele.aina@tiscali.it>
run-parts
@@ -26,9 +23,6 @@ Laurence Anderson <l.d.anderson@warwick.ac.uk>
Jeff Angielski <jeff@theptrgroup.com>
ftpput, ftpget
Enrik Berkhan <Enrik.Berkhan@inka.de>
setconsole
Jim Bauer <jfbauer@nfr.com>
modprobe shell dependency
@@ -38,9 +32,6 @@ Edward Betts <edward@debian.org>
John Beppu <beppu@codepoet.org>
du, nslookup, sort
David Brownell <dbrownell@users.sourceforge.net>
zcip
Brian Candler <B.Candler@pobox.com>
tiny-ls(ls)
@@ -82,12 +73,9 @@ Matt Kraai <kraai@alumni.cmu.edu>
documentation, bugfixes, test suite
Rob Landley <rob@landley.net>
Became busybox maintainer in 2006.
sed (major rewrite in 2003, and I now maintain the thing)
bunzip2 (complete from-scratch rewrite, then mjn3 optimized the result)
sort (more or less from scratch rewrite in 2004, I now maintain it)
mount (rewrite in 2005, I maintain the new one)
sed (major rewrite in 2003, and I now maintain the thing).
bunzip2 (complete from-scratch rewrite, then mjn3 optimized the result.)
I've patched lots of other applets, but don't maintain 'em.
Stephan Linz <linz@li-pro.net>
ipcalc, Red Hat equivalence
@@ -95,15 +83,14 @@ Stephan Linz <linz@li-pro.net>
John Lombardo <john@deltanet.com>
tr
Glenn McGrath <glenn.l.mcgrath@gmail.com>
Glenn McGrath <bug1@iinet.net.au>
Common unarchiving code and unarchiving applets, ifupdown, ftpgetput,
nameif, sed, patch, fold, install, uudecode.
Various bugfixes, review and apply numerous patches.
Manuel Novoa III <mjn3@codepoet.org>
cat, head, mkfifo, mknod, rmdir, sleep, tee, tty, uniq, usleep, wc, yes,
mesg, vconfig, nice, renice,
make_directory, parse_mode, dirname, mode_string,
mesg, vconfig, make_directory, parse_mode, dirname, mode_string,
get_last_path_component, simplify_path, and a number trivial libbb routines
also bug fixes, partial rewrites, and size optimizations in
@@ -112,9 +99,8 @@ Manuel Novoa III <mjn3@codepoet.org>
interface, dutmp, ifconfig, route
Vladimir Oleynik <dzo@simtreas.ru>
cmdedit; bb_mkdep, xargs(current), httpd(current);
ports: ash, crond, fdisk (initial, unmaintained now), inetd, stty, traceroute,
top;
cmdedit; xargs(current), httpd(current);
ports: ash, crond, fdisk, inetd, stty, traceroute, top;
locale, various fixes
and irreconcilable critic of everything not perfect.
@@ -122,9 +108,6 @@ Bruce Perens <bruce@pixar.com>
Original author of BusyBox in 1995, 1996. Some of his code can
still be found hiding here and there...
Rodney Radford <rradford@mindspring.com>
ipcs, ipcrm
Tim Riker <Tim@Rikers.org>
bug fixes, member of fan club
@@ -140,10 +123,7 @@ Pavel Roskin <proski@gnu.org>
Gyepi Sam <gyepi@praxis-sw.com>
Remote logging feature for syslogd
Rob Sullivan <cogito.ergo.cogito@gmail.com>
comm
Linus Torvalds
Linus Torvalds <torvalds@transmeta.com>
mkswap, fsck.minix, mkfs.minix
Mark Whitley <markw@codepoet.org>
@@ -157,20 +137,5 @@ Enrique Zanardi <ezanardi@ull.es>
tarcat (since removed), loadkmap, various fixes, Debian maintenance
Tito Ragusa <farmatito@tiscali.it>
devfsd and size optimizations in strings, openvt, chvt, deallocvt, hdparm,
fdformat, lsattr, chattr, id and eject.
devfsd and size optimizations in strings, openvt, chvt, deallocvt, hdparm and fdformat.
Paul Fox <pgf@foxharp.boston.ma.us>
vi editing mode for ash, various other patches/fixes
Roberto A. Foglietta <me@roberto.foglietta.name>
port: dnsd
Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
misc
Mike Frysinger <vapier@gentoo.org>
initial e2fsprogs, printenv, setarch, sum, misc
Jie Zhang <jie.zhang@analog.com>
fixed two bugs in msh and hush (exitcode of killed processes)
+20
View File
@@ -0,0 +1,20 @@
1) Run 'make config' or 'make menuconfig' and select the
functionality that you wish to enable.
2) Run 'make dep'
3) Check the Makefile for any Makefile setting you wish
to adjust for your system (things like like setting
your cross compiler, adjusting optimizations, etc)
4) Run 'make'
5) Go get a drink of water, drink a soda, visit the bathroom,
or whatever while it compiles. It doesn't take very
long to compile, so you don't really need to waste too
much time waiting...
6) Run 'make install' or 'make PREFIX=/target install' to
install busybox and all the needed links. Some people
will prefer to install using hardlinks and will instead
want to run 'make install-hardlinks'....
+2 -10
View File
@@ -1,16 +1,8 @@
--- A note on GPL versions
BusyBox is distributed under version 2 of the General Public License (included
in its entirety, below). Version 2 is the only version of this license which
this version of BusyBox (or modified versions derived from this one) may be
distributed under.
------------------------------------------------------------------------
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
@@ -313,7 +305,7 @@ the "copyright" line and a pointer to where the full notice is found.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Also add information on how to contact you by electronic and paper mail.
+314
View File
@@ -0,0 +1,314 @@
# Makefile for busybox
#
# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
#--------------------------------------------------------------
# You shouldn't need to mess with anything beyond this point...
#--------------------------------------------------------------
noconfig_targets := menuconfig config oldconfig randconfig \
defconfig allyesconfig allnoconfig clean distclean \
release tags
ifndef TOPDIR
TOPDIR=$(CURDIR)/
endif
ifndef top_srcdir
top_srcdir=$(CURDIR)
endif
ifndef top_builddir
top_builddir=$(CURDIR)
endif
export srctree=$(top_srcdir)
vpath %/Config.in $(srctree)
include $(top_builddir)/Rules.mak
DIRS:=applets archival archival/libunarchive coreutils console-tools \
debianutils editors findutils init miscutils modutils networking \
networking/libiproute networking/udhcp procps loginutils shell \
sysklogd util-linux libpwdgrp coreutils/libcoreutils libbb
SRC_DIRS:=$(patsubst %,$(top_srcdir)/%,$(DIRS))
ifeq ($(strip $(CONFIG_SELINUX)),y)
CFLAGS += -I/usr/include/selinux
LIBRARIES += -lsecure
endif
CONFIG_CONFIG_IN = $(top_srcdir)/sysdeps/$(TARGET_OS)/Config.in
CONFIG_DEFCONFIG = $(top_srcdir)/sysdeps/$(TARGET_OS)/defconfig
ALL_DIRS:= $(DIRS) scripts/config
ALL_MAKEFILES:=$(patsubst %,%/Makefile,$(ALL_DIRS))
ifeq ($(KBUILD_SRC),)
ifdef O
ifeq ("$(origin O)", "command line")
KBUILD_OUTPUT := $(O)
endif
endif
# That's our default target when none is given on the command line
.PHONY: _all
_all:
ifneq ($(KBUILD_OUTPUT),)
# Invoke a second make in the output directory, passing relevant variables
# check that the output directory actually exists
saved-output := $(KBUILD_OUTPUT)
KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
$(if $(wildcard $(KBUILD_OUTPUT)),, \
$(error output directory "$(saved-output)" does not exist))
.PHONY: $(MAKECMDGOALS)
$(filter-out _all,$(MAKECMDGOALS)) _all: $(KBUILD_OUTPUT)/Rules.mak $(KBUILD_OUTPUT)/Makefile
$(MAKE) -C $(KBUILD_OUTPUT) \
top_srcdir=$(CURDIR) \
top_builddir=$(KBUILD_OUTPUT) \
TOPDIR=$(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
-f $(CURDIR)/Makefile $@
$(KBUILD_OUTPUT)/Rules.mak:
@echo > $@
@echo top_srcdir=$(CURDIR) >> $@
@echo top_builddir=$(KBUILD_OUTPUT) >> $@
@echo include $(top_srcdir)/Rules.mak >> $@
$(KBUILD_OUTPUT)/Makefile:
@echo > $@
@echo top_srcdir=$(CURDIR) >> $@
@echo top_builddir=$(KBUILD_OUTPUT) >> $@
@echo KBUILD_SRC='$$(top_srcdir)' >> $@
@echo include '$$(KBUILD_SRC)'/Makefile >> $@
# Leave processing to above invocation of make
skip-makefile := 1
endif # ifneq ($(KBUILD_OUTPUT),)
endif # ifeq ($(KBUILD_SRC),)
ifeq ($(skip-makefile),)
_all: all
ifeq ($(strip $(HAVE_DOT_CONFIG)),y)
all: busybox busybox.links doc
all_tree: $(ALL_MAKEFILES)
$(ALL_MAKEFILES): %/Makefile: $(top_srcdir)/%/Makefile
d=`dirname $@`; [ -d "$$d" ] || mkdir -p "$$d"; cp $< $@
# In this section, we need .config
-include $(top_builddir)/.config.cmd
include $(patsubst %,%/Makefile.in, $(SRC_DIRS))
-include $(top_builddir)/.depend
busybox: $(ALL_MAKEFILES) .depend include/config.h $(libraries-y)
$(CC) $(LDFLAGS) -o $@ -Wl,--start-group $(libraries-y) $(LIBRARIES) -Wl,--end-group
$(STRIPCMD) $@
busybox.links: $(top_srcdir)/applets/busybox.mkll include/config.h $(top_srcdir)/include/applets.h
- $(SHELL) $^ >$@
install: applets/install.sh busybox busybox.links
$(SHELL) $< $(PREFIX)
ifeq ($(strip $(CONFIG_FEATURE_SUID)),y)
@echo
@echo
@echo --------------------------------------------------
@echo You will probably need to make your busybox binary
@echo setuid root to ensure all configured applets will
@echo work properly.
@echo --------------------------------------------------
@echo
endif
uninstall: busybox.links
rm -f $(PREFIX)/bin/busybox
for i in `cat busybox.links` ; do rm -f $(PREFIX)$$i; done
install-hardlinks: $(top_srcdir)/applets/install.sh busybox busybox.links
$(SHELL) $< $(PREFIX) --hardlinks
check: busybox
bindir=$(top_builddir) srcdir=$(top_srcdir)/testsuite \
$(top_srcdir)/testsuite/runtest
# Documentation Targets
doc: docs/busybox.pod docs/BusyBox.txt docs/BusyBox.1 docs/BusyBox.html
docs/busybox.pod : $(top_srcdir)/docs/busybox_header.pod $(top_srcdir)/include/usage.h $(top_srcdir)/docs/busybox_footer.pod
-mkdir -p docs
- ( cat $(top_srcdir)/docs/busybox_header.pod; \
$(top_srcdir)/docs/autodocifier.pl $(top_srcdir)/include/usage.h; \
cat $(top_srcdir)/docs/busybox_footer.pod ) > docs/busybox.pod
docs/BusyBox.txt: docs/busybox.pod
$(SECHO)
$(SECHO) BusyBox Documentation
$(SECHO)
-mkdir -p docs
-pod2text $< > $@
docs/BusyBox.1: docs/busybox.pod
- mkdir -p docs
- pod2man --center=BusyBox --release="version $(VERSION)" \
$< > $@
docs/BusyBox.html: docs/busybox.net/BusyBox.html
- mkdir -p docs
-@ rm -f docs/BusyBox.html
-@ cp docs/busybox.net/BusyBox.html docs/BusyBox.html
docs/busybox.net/BusyBox.html: docs/busybox.pod
-@ mkdir -p docs/busybox.net
- pod2html --noindex $< > \
docs/busybox.net/BusyBox.html
-@ rm -f pod2htm*
# The nifty new buildsystem stuff
scripts/mkdep: $(top_srcdir)/scripts/mkdep.c
$(HOSTCC) $(HOSTCFLAGS) -o $@ $<
scripts/split-include: $(top_srcdir)/scripts/split-include.c
$(HOSTCC) $(HOSTCFLAGS) -o $@ $<
.depend: scripts/mkdep include/config.h
rm -f .depend .hdepend;
mkdir -p include/config;
scripts/mkdep -I include -- \
`find $(top_srcdir) -name \*.c -print | sed -e "s,^./,,"` >> .depend;
scripts/mkdep -I include -- \
`find $(top_srcdir) -name \*.h -print | sed -e "s,^./,,"` >> .hdepend;
depend dep: .depend
include/config/MARKER: depend scripts/split-include
scripts/split-include include/config.h include/config
@ touch include/config/MARKER
include/config.h: .config
@if [ ! -x $(top_builddir)/scripts/config/conf ] ; then \
$(MAKE) -C scripts/config conf; \
fi;
@$(top_builddir)/scripts/config/conf -o $(CONFIG_CONFIG_IN)
finished2:
$(SECHO)
$(SECHO) Finished installing...
$(SECHO)
else # ifeq ($(strip $(HAVE_DOT_CONFIG)),y)
all: menuconfig
# configuration
# ---------------------------------------------------------------------------
$(ALL_MAKEFILES): %/Makefile: $(top_srcdir)/%/Makefile
d=`dirname $@`; [ -d "$$d" ] || mkdir -p "$$d"; cp $< $@
scripts/config/conf: scripts/config/Makefile Rules.mak
$(MAKE) -C scripts/config conf
-@if [ ! -f .config ] ; then \
cp $(CONFIG_DEFCONFIG) .config; \
fi
scripts/config/mconf: scripts/config/Makefile Rules.mak
$(MAKE) -C scripts/config ncurses conf mconf
-@if [ ! -f .config ] ; then \
cp $(CONFIG_DEFCONFIG) .config; \
fi
menuconfig: scripts/config/mconf
@./scripts/config/mconf $(CONFIG_CONFIG_IN)
config: scripts/config/conf
@./scripts/config/conf $(CONFIG_CONFIG_IN)
oldconfig: scripts/config/conf
@./scripts/config/conf -o $(CONFIG_CONFIG_IN)
randconfig: scripts/config/conf
@./scripts/config/conf -r $(CONFIG_CONFIG_IN)
allyesconfig: scripts/config/conf
@./scripts/config/conf -y $(CONFIG_CONFIG_IN)
sed -i -e "s/^CONFIG_DEBUG.*/# CONFIG_DEBUG is not set/" .config
sed -i -e "s/^USING_CROSS_COMPILER.*/# USING_CROSS_COMPILER is not set/" .config
sed -i -e "s/^CONFIG_STATIC.*/# CONFIG_STATIC is not set/" .config
sed -i -e "s/^CONFIG_SELINUX.*/# CONFIG_SELINUX is not set/" .config
@./scripts/config/conf -o $(CONFIG_CONFIG_IN)
allnoconfig: scripts/config/conf
@./scripts/config/conf -n $(CONFIG_CONFIG_IN)
defconfig: scripts/config/conf
@./scripts/config/conf -d $(CONFIG_CONFIG_IN)
clean:
- rm -f docs/busybox.dvi docs/busybox.ps \
docs/busybox.pod docs/busybox.net/busybox.html \
docs/busybox pod2htm* *.gdb *.elf *~ core .*config.log \
docs/BusyBox.txt docs/BusyBox.1 docs/BusyBox.html \
docs/busybox.net/BusyBox.html busybox.links libbb/loop.h \
.config.old .hdepend busybox
- rm -rf _install
- find . -name .\*.flags -exec rm -f {} \;
- find . -name \*.o -exec rm -f {} \;
- find . -name \*.a -exec rm -f {} \;
distclean: clean
- rm -f scripts/split-include scripts/mkdep
- rm -rf include/config include/config.h
- find . -name .depend -exec rm -f {} \;
rm -f .config .config.old .config.cmd
- $(MAKE) -C scripts/config clean
release: distclean #doc
cd ..; \
rm -rf $(PROG)-$(VERSION); \
cp -a busybox $(PROG)-$(VERSION); \
\
find $(PROG)-$(VERSION)/ -type d \
-name .svn \
-print \
-exec rm -rf {} \; ; \
\
find $(PROG)-$(VERSION)/ -type f \
-name .\#* \
-print \
-exec rm -f {} \; ; \
\
tar -cvzf $(PROG)-$(VERSION).tar.gz $(PROG)-$(VERSION)/;
tags:
ctags -R .
endif # ifeq ($(strip $(HAVE_DOT_CONFIG)),y)
endif # ifeq ($(skip-makefile),)
.PHONY: dummy subdirs release distclean clean config oldconfig \
menuconfig tags check test depend buildtree
+46 -54
View File
@@ -1,16 +1,15 @@
Please see the LICENSE file for details on copying and usage.
Please refer to the INSTALL file for instructions on how to build.
What is busybox:
BusyBox combines tiny versions of many common UNIX utilities into a single
small executable. It provides minimalist replacements for most of the
utilities you usually find in bzip2, coreutils, dhcp, diffutils, e2fsprogs,
file, findutils, gawk, grep, inetutils, less, modutils, net-tools, procps,
sed, shadow, sysklogd, sysvinit, tar, util-linux, and vim. The utilities
in BusyBox often have fewer options than their full-featured cousins;
however, the options that are included provide the expected functionality
and behave very much like their larger counterparts.
utilities you usually find in bzip2, coreutils, file, findutils, gawk, grep,
inetutils, modutils, net-tools, procps, sed, shadow, sysklogd, sysvinit, tar,
util-linux, and vim. The utilities in BusyBox often have fewer options than
their full-featured cousins; however, the options that are included provide
the expected functionality and behave very much like their larger
counterparts.
BusyBox has been written with size-optimization and limited resources in
mind, both to produce small binaries and to reduce run-time memory usage.
@@ -36,12 +35,12 @@ Using busybox:
BusyBox is extremely configurable. This allows you to include only the
components and options you need, thereby reducing binary size. Run 'make
config' or 'make menuconfig' to select the functionality that you wish to
enable. (See 'make help' for more commands.)
enable.
The behavior of busybox is determined by the name it's called under: as
"cp" it behaves like cp, as "sed" it behaves like sed, and so on. Called
as "busybox" it takes the second argument as the name of the applet to
run (I.E. "./busybox ls -l /proc").
run (I.E. "./busybox ls -l /proc").
The "standalone shell" mode is an easy way to try out busybox; this is a
command shell that calls the builtin applets without needing them to be
@@ -50,10 +49,9 @@ Using busybox:
The build automatically generates a file "busybox.links", which is used by
'make install' to create symlinks to the BusyBox binary for all compiled in
commands. This uses the CONFIG_PREFIX environment variable to specify
where to install, and installs hardlinks or symlinks depending
on the configuration preferences. (You can also manually run
the install script at "applets/install.sh").
commands. Use the PREFIX environment variable to specify where to install
the busybox binary and symlink forest. (i.e., 'make PREFIX=/tmp/foo install',
or 'make PREFIX=/tmp/foo install-hardlinks' if you prefer hard links.)
----------------
@@ -64,13 +62,14 @@ Downloading the current source code:
http://busybox.net/downloads/
You can browse the up to the minute source code and change history online.
You can browse the up to the minute source code and change history online
at:
http://git.busybox.net/busybox/
http://www.busybox.net/cgi-bin/viewcvs.cgi/branches/busybox_1_00_stable/busybox/
Anonymous GIT access is available. For instructions, check out:
Anonymous SVN access is available. For instructions, check out:
http://www.busybox.net/source.html
http://busybox.net/subversion.html
For those that are actively contributing and would like to check files in,
see:
@@ -78,16 +77,13 @@ Downloading the current source code:
http://busybox.net/developer.html
The developers also have a bug and patch tracking system
(https://bugs.busybox.net) although posting a bug/patch to the mailing list
(http://bugs.busybox.net) although posting a bug/patch to the mailing list
is generally a faster way of getting it fixed, and the complete archive of
what happened is the subversion changelog.
Note: if you want to compile busybox in a busybox environment you must
select CONFIG_DESKTOP.
----------------
Getting help:
getting help:
when you find you need help, you can check out the busybox mailing list
archives at http://busybox.net/lists/busybox/ or even join
@@ -95,7 +91,7 @@ Getting help:
----------------
Bugs:
bugs:
if you find bugs, please submit a detailed bug report to the busybox mailing
list at busybox@busybox.net. a well-written bug report should include a
@@ -103,7 +99,7 @@ Bugs:
anyone else to duplicate the bug on their own machine. the following is such
an example:
to: busybox@busybox.net
to: busybox@mail.busybox.net
from: diligent@testing.linux.org
subject: /bin/date doesn't work
@@ -122,7 +118,7 @@ Bugs:
illegal instruction
i am using debian unstable, kernel version 2.4.25-vrs2 on a netwinder,
and the latest uclibc from cvs.
and the latest uclibc from cvs. thanks for the wonderful program!
-diligent
@@ -135,28 +131,27 @@ Bugs:
Portability:
Busybox is developed and tested on Linux 2.4 and 2.6 kernels, compiled
with gcc (the unit-at-a-time optimizations in version 3.4 and later are
worth upgrading to get, but older versions should work), and linked against
uClibc (0.9.27 or greater) or glibc (2.2 or greater). In such an
environment, the full set of busybox features should work, and if
anything doesn't we want to know about it so we can fix it.
Busybox is developed and tested on Linux 2.4 and 2.6 kernels, linked
against uClibc (0.9.27 or greater) and glibc (2.2 or greater). In such
an environment, the full set of busybox features should work (and if
anything doesn't we want to know about it so we can fix it). Note that
the 2.6 kernel can be trimmed down considerably with the aid of Matt
Mackall's -tiny work (http://www.selenic.com/tiny-about/).
There are many other environments out there, in which busybox may build
and run just fine. We just don't test them. Since busybox consists of a
large number of more or less independent applets, portability is a question
of which features work where. Some busybox applets (such as cat and rm) are
highly portable and likely to work just about anywhere, while others (such as
insmod and losetup) require recent Linux kernels with recent C libraries.
Since busybox consists of a large number of more or less independent
applets, portability is a question of which features work where. Some
busybox applets (such as cat and rm) are highly portable and likely to work
just about anywhere, while others (such as insmod and losetup) are only
likely to work under fairly recent Linux kernels with recent C libraries.
Earlier versions of Linux and glibc may or may not work, for any given
configuration. Linux 2.2 or earlier should mostly work (there's still
some support code in things like mount.c) but this is no longer regularly
tested, and inherently won't support certain features (such as long files
and --bind mounts). The same is true for glibc 2.0 and 2.1: expect a higher
testing and debugging burden using such old infrastructure. (The busybox
developers are not very interested in supporting these older versions, but
will probably accept small self-contained patches to fix simple problems.)
configuration. Linux 2.2 or earlier should mostly work, but this is no
longer regularly tested and inherently won't support certain features (such
as long files and --bind mounts). The same is true for glibc 2.0 and 2.1,
expect a higher testing and debugging burden using such old infrastructure.
(The busybox developers are not very interested in supporting these older
versions, but can probably be talked into accepting small patches to fix
simple problems.)
Some environments are not recommended. Early versions of uClibc were buggy
and missing many features: upgrade. Linking against libc5 or dietlibc is
@@ -173,8 +168,10 @@ Portability:
you're into that sort of thing, start small (selecting just a few applets)
and work your way up.
In 2005 Shaun Jackman has ported busybox to a combination of newlib
and libgloss, and some of his patches have been integrated.
Shaun Jackman has recently (2005) ported busybox to a combination of newlib
and libgloss, and some of his patches have been integrated. This platform
may join glibc/uclibc and Linux as a supported combination with the 1.1
release, but is not supported in 1.0.
Supported hardware:
@@ -194,11 +191,6 @@ Supported hardware:
----------------
Please feed suggestions, bug reports, insults, and bribes back to the busybox
mailing list:
busybox@busybox.net
and/or maintainer:
Denys Vlasenko
<vda.linux@googlemail.com>
maintainer:
Erik Andersen
<andersen@codepoet.org>
+200
View File
@@ -0,0 +1,200 @@
# Rules.make for busybox
#
# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
#--------------------------------------------------------
PROG := busybox
VERSION := 1.01
BUILDTIME := $(shell TZ=UTC date -u "+%Y.%m.%d-%H:%M%z")
#--------------------------------------------------------
# With a modern GNU make(1) (highly recommended, that's what all the
# developers use), all of the following configuration values can be
# overridden at the command line. For example:
# make CROSS=powerpc-linux- BB_SRC_DIR=$HOME/busybox PREFIX=/mnt/app
#--------------------------------------------------------
# If you are running a cross compiler, you will want to set 'CROSS'
# to something more interesting... Target architecture is determined
# by asking the CC compiler what arch it compiles things for, so unless
# your compiler is broken, you should not need to specify TARGET_ARCH
CROSS =$(subst ",, $(strip $(CROSS_COMPILER_PREFIX)))
CC = $(CROSS)gcc
AR = $(CROSS)ar
AS = $(CROSS)as
LD = $(CROSS)ld
NM = $(CROSS)nm
STRIP = $(CROSS)strip
CPP = $(CC) -E
# MAKEFILES = $(top_builddir)/.config
# What OS are you compiling busybox for? This allows you to include
# OS specific things, syscall overrides, etc.
TARGET_OS=linux
# Select the compiler needed to build binaries for your development system
HOSTCC = gcc
HOSTCFLAGS= -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
# Ensure consistent sort order, 'gcc -print-search-dirs' behavior, etc.
LC_ALL:= C
# If you want to add some simple compiler switches (like -march=i686),
# especially from the command line, use this instead of CFLAGS directly.
# For optimization overrides, it's better still to set OPTIMIZATION.
CFLAGS_EXTRA=$(subst ",, $(strip $(EXTRA_CFLAGS_OPTIONS)))
# If you have a "pristine" source directory, point BB_SRC_DIR to it.
# Experimental and incomplete; tell the mailing list
# <busybox@busybox.net> if you do or don't like it so far.
BB_SRC_DIR=
# To compile vs some other alternative libc, you may need to use/adjust
# the following lines to meet your needs...
#
# If you are using Red Hat 6.x with the compatible RPMs (for developing under
# Red Hat 5.x and glibc 2.0) uncomment the following. Be sure to read about
# using the compatible RPMs (compat-*) at http://www.redhat.com !
#LIBCDIR:=/usr/i386-glibc20-linux
#
# For other libraries, you are on your own. But these may (or may not) help...
#LDFLAGS+=-nostdlib
#LIBRARIES:=$(LIBCDIR)/lib/libc.a -lgcc
#CROSS_CFLAGS+=-nostdinc -I$(LIBCDIR)/include -I$(GCCINCDIR)
#GCCINCDIR:=$(shell gcc -print-search-dirs | sed -ne "s/install: \(.*\)/\1include/gp")
WARNINGS=-Wall -Wstrict-prototypes -Wshadow
CFLAGS=-I$(top_builddir)/include -I$(top_srcdir)/include -I$(srcdir)
ARFLAGS=cru
#--------------------------------------------------------
export VERSION BUILDTIME TOPDIR HOSTCC HOSTCFLAGS CROSS CC AR AS LD NM STRIP CPP
ifeq ($(strip $(TARGET_ARCH)),)
TARGET_ARCH:=$(shell $(CC) -dumpmachine | sed -e s'/-.*//' \
-e 's/i.86/i386/' \
-e 's/sparc.*/sparc/' \
-e 's/arm.*/arm/g' \
-e 's/m68k.*/m68k/' \
-e 's/ppc/powerpc/g' \
-e 's/v850.*/v850/g' \
-e 's/sh[234]/sh/' \
-e 's/mips-.*/mips/' \
-e 's/mipsel-.*/mipsel/' \
-e 's/cris.*/cris/' \
)
endif
# Pull in the user's busybox configuration
ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
-include $(top_builddir)/.config
endif
# A nifty macro to make testing gcc features easier
check_gcc=$(shell if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; \
then echo "$(1)"; else echo "$(2)"; fi)
# Setup some shortcuts so that silent mode is silent like it should be
ifeq ($(subst s,,$(MAKEFLAGS)),$(MAKEFLAGS))
export MAKE_IS_SILENT=n
SECHO=@echo
else
export MAKE_IS_SILENT=y
SECHO=-@false
endif
#--------------------------------------------------------
# Arch specific compiler optimization stuff should go here.
# Unless you want to override the defaults, do not set anything
# for OPTIMIZATION...
# use '-Os' optimization if available, else use -O2
OPTIMIZATION:=${call check_gcc,-Os,-O2}
# Some nice architecture specific optimizations
ifeq ($(strip $(TARGET_ARCH)),arm)
OPTIMIZATION+=-fstrict-aliasing
endif
ifeq ($(strip $(TARGET_ARCH)),i386)
OPTIMIZATION+=$(call check_gcc,-march=i386,)
OPTIMIZATION+=$(call check_gcc,-mpreferred-stack-boundary=2,)
OPTIMIZATION+=$(call check_gcc,-falign-functions=0 -falign-jumps=0 -falign-loops=0,\
-malign-functions=0 -malign-jumps=0 -malign-loops=0)
endif
OPTIMIZATIONS=$(OPTIMIZATION) -fomit-frame-pointer
#
#--------------------------------------------------------
# If you're going to do a lot of builds with a non-vanilla configuration,
# it makes sense to adjust parameters above, so you can type "make"
# by itself, instead of following it by the same half-dozen overrides
# every time. The stuff below, on the other hand, is probably less
# prone to casual user adjustment.
#
ifeq ($(strip $(CONFIG_LFS)),y)
# For large file summit support
CFLAGS+=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
endif
ifeq ($(strip $(CONFIG_DMALLOC)),y)
# For testing mem leaks with dmalloc
CFLAGS+=-DDMALLOC
LIBRARIES:=-ldmalloc
else
ifeq ($(strip $(CONFIG_EFENCE)),y)
LIBRARIES:=-lefence
endif
endif
ifeq ($(strip $(CONFIG_DEBUG)),y)
CFLAGS +=$(WARNINGS) -g -D_GNU_SOURCE
LDFLAGS +=-Wl,-warn-common
STRIPCMD:=/bin/true -Not_stripping_since_we_are_debugging
else
CFLAGS+=$(WARNINGS) $(OPTIMIZATIONS) -D_GNU_SOURCE -DNDEBUG
LDFLAGS += -Wl,-warn-common
STRIPCMD:=$(STRIP) -s --remove-section=.note --remove-section=.comment
endif
ifeq ($(strip $(CONFIG_STATIC)),y)
LDFLAGS += --static
endif
ifeq ($(strip $(PREFIX)),)
PREFIX:=`pwd`/_install
endif
# Additional complications due to support for pristine source dir.
# Include files in the build directory should take precedence over
# the copy in BB_SRC_DIR, both during the compilation phase and the
# shell script that finds the list of object files.
# Work in progress by <ldoolitt@recycle.lbl.gov>.
#
ifneq ($(strip $(BB_SRC_DIR)),)
VPATH:=$(BB_SRC_DIR)
endif
OBJECTS:=$(APPLET_SOURCES:.c=.o) busybox.o usage.o applets.o
CFLAGS += $(CROSS_CFLAGS)
ifdef BB_INIT_SCRIPT
CFLAGS += -DINIT_SCRIPT='"$(BB_INIT_SCRIPT)"'
endif
# Put user-supplied flags at the end, where they
# have a chance of winning.
CFLAGS += $(CFLAGS_EXTRA)
.PHONY: dummy
+11
View File
@@ -0,0 +1,11 @@
Busybox TODO
Stuff that needs to be done
----
tr - missing SuS3 features in busybox 1.0pre10
tr doesnt support [:blank:], [:digit:] or other predefined classes, [=equiv=]
support is also missing.
----
+32
View File
@@ -0,0 +1,32 @@
# Makefile for busybox
#
# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
top_srcdir=..
top_builddir=..
srcdir=$(top_srcdir)/applets
APPLETS_DIR:=./
include $(top_builddir)/Rules.mak
include $(top_builddir)/.config
include $(srcdir)/Makefile.in
all: $(libraries-y)
-include $(top_builddir).depend
clean:
rm -f *.o *.a $(AR_TARGET)
Loaded 100 of 2193 files, more files were not shown because too many files have changed in this diff. Show more